Does the print on thermal paper disappear after a while if exposed to light?

Does the print on thermal paper disappear after a while if exposed to light?
by

1 Answer

Answer :

Not so much light, but heat. read this The hand sanitizer theory is new to me.
by

Related questions

When will paper $1 bills disappear in the US?

Description : When will paper $1 bills disappear in the US?

Last Answer : answer:I'm not American, but I agree that the US should use $1 and $2 in coin from only - it seems illogical to use notes for such small denominations. I've heard too that the US is one of ... to see what amount it is compare to Australian money, where each note is of a different colour and size.

Why do the lines on paper fade (and eventually disappear) if left in sunlight?

Description : Why do the lines on paper fade (and eventually disappear) if left in sunlight?

Last Answer : answer:Ultraviolet light (which sunlight has plenty of) can ‘bleach’ the paper by slowly breaking down various inks and pigments. http://en.wikipedia.org/wiki/Ultraviolet_light#Degradation_of_polymers.2C_pigments_and_dyes

A metal wire of 0.01 m dia and thermal conductivity 200 W/m.K is exposed to a fluid stream with a convective heat transfer coefficient of 100 W/m2 .K. The Biot number is (A) 5.6 (B) 0.025 (C) 3.5 (D) 0.0035

Description : A metal wire of 0.01 m dia and thermal conductivity 200 W/m.K is exposed to a fluid stream with a convective heat transfer coefficient of 100 W/m2 .K. The Biot number is (A) 5.6 (B) 0.025 (C) 3.5 (D) 0.0035

Last Answer : (B) 0.025

The left face of a one dimensional slab of thickness 0.2 m is maintained at 80°C and the right face is exposed to air at 30°C. The thermal conductivity of the slab is 1.2 W/m.K and the heat transfer co-efficient from the right face is 10 W/m2 .K. At steady state, the temperature of the right face in °C is (A) 77.2 (B) 71.2 (C) 63.8 (D) 48.7

Description : The left face of a one dimensional slab of thickness 0.2 m is maintained at 80°C and the right face is exposed to air at 30°C. The thermal conductivity of the slab is 1.2 W/m.K and the heat transfer co-efficient from the ... temperature of the right face in °C is (A) 77.2 (B) 71.2 (C) 63.8 (D) 48.7

Last Answer : (D) 48.7

One face of a furnace wall is at 1030°C and the other face is exposed to room temperature (30°C). If the thermal conductivity of furnace wall is 3 W. m-1. k-1 and the wall thickness is 0.3 m, the maximum heat loss (in W/m) is (A) 100 (B) 900 (C) 9000 (D) 10000

Description : One face of a furnace wall is at 1030°C and the other face is exposed to room temperature (30°C). If the thermal conductivity of furnace wall is 3 W. m-1. k-1 and the wall thickness is 0.3 m, the maximum heat loss (in W/m) is (A) 100 (B) 900 (C) 9000 (D) 10000

Last Answer : (D) 10000

The condition intensifies the spread of perennial propagules of weeds after being exposed by tillage a). Hot weather b). Rainfall c). High light intensity d). High wind

Description : The condition intensifies the spread of perennial propagules of weeds after being exposed by tillage a). Hot weather b). Rainfall c). High light intensity d). High wind

Last Answer : b). Rainfall

Interference pattern is observed in wedge-shaped film for monochromatic light. Now monochromatic light is replaced by white light. What will be the effect on interference pattern? (a) It will turn to dark (b) It will turn to bright (c) Bands will disappear (d) It will be a mixture of all colors

Description : Interference pattern is observed in wedge-shaped film for monochromatic light. Now monochromatic light is replaced by white light. What will be the effect on interference pattern? (a) It will turn to dark (b) It will turn to bright (c) Bands will disappear (d) It will be a mixture of all colors

Last Answer : (d) It will be a mixture of all colors

Could I have been exposed to Hogweed years ago? I have problems with light in the mornings and I cover my windows and skip school?

Description : Could I have been exposed to Hogweed years ago? I have problems with light in the mornings and I cover my windows and skip school?

Last Answer : answer:Here are some really good pictures of the plants at various stages. http://www.msss.gouv.qc.ca/sujets/santepub/environnement/index.php?gberce-du-caucase-en I think ... http://www.kingcounty.gov/environment/animalsAndPlants/noxious-weeds/weed-identification/giant-hogweed/hogweed-burns.aspx

The orange colour of carrot is because of – (1) it grows in the soil (2) Carotene (3) it is not exposed to sun-light (4) the entire plant is orange in colour

Description : The orange colour of carrot is because of – (1) it grows in the soil (2) Carotene (3) it is not exposed to sun-light (4) the entire plant is orange in colour

Last Answer : (2) Carotene Explanation: The carrot gets its characteristic, bright orange colour from beta-carotene and lesser amounts of carotene, carotene, lutein and zeaxan thin.

The soft silvery metalic element which ionizes easily when heated or exposed to light and is present in atomic clocks is – (1) Cerium (2) Cesium (3) Calcium (4) Californium

Description : The soft silvery metalic element which ionizes easily when heated or exposed to light and is present in atomic clocks is – (1) Cerium (2) Cesium (3) Calcium (4) Californium

Last Answer : (2) Cesium Explanation: 1967, based on Einstein defining the speed of light as the most constant dimension in the universe, the International System of Units isolated two specific wave counts ... cesium has lowest ionization energy and hence it can show photoelectric effect to the maximum extent.

Our skin; when exposed to excess sun- light; becomes dark. This is because our skin pigments called?

Description : Our skin; when exposed to excess sun- light; becomes dark. This is because our skin pigments called?

Last Answer : melanin

Name the product obtained when methane and chlorine is exposed to ultraviolet light (sunlight).

Description : Name the product obtained when methane and chlorine is exposed to ultraviolet light (sunlight).

Last Answer : When a mixture of methane and chlorine is exposed to ultraviolet light, chloromethane is formed.

Potato tubers become green if a. Exposed to light b. Attacked by insect c. Infected d. None of these

Description : Potato tubers become green if a. Exposed to light b. Attacked by insect c. Infected d. None of these

Last Answer : Exposed to light

What causes a green plant exposed to the light, on only one side, to bend towards the source of light as it grows? (a) Light stimulates plant cells on the lighted side to grow faster. (b) Auxin accumulates on the shaded side, stimulating greater cell elongation there. (c) Green plants need light to perform photosynthesis. (d) Green plants seek light because they are phototropic.

Description : What causes a green plant exposed to the light, on only one side, to bend towards the source of light as it grows? (a) Light stimulates plant cells on the lighted side to grow ... Green plants need light to perform photosynthesis. (d) Green plants seek light because they are phototropic.

Last Answer : (b) Auxin accumulates on the shaded side, stimulating greater cell elongation there

Which of the following poisonous gas is formed when chloroform is exposed to light and air? (a) Mustard gas (b) Carbon monoxide (c) Phosgene (d) Chlorine

Description : Which of the following poisonous gas is formed when chloroform is exposed to light and air? (a) Mustard gas (b) Carbon monoxide (c) Phosgene (d) Chlorine

Last Answer : Phosgene

What semiconductor device produces electrical energy when exposed to light?

Description : What semiconductor device produces electrical energy when exposed to light?

Last Answer : Photovoltaic cell.

Selenium is: (a) Conductor (b) Insulator in the dark are becomes conductor when exposed to light (c) An insulator (d) None of these

Description : Selenium is: (a) Conductor (b) Insulator in the dark are becomes conductor when exposed to light (c) An insulator (d) None of these

Last Answer : (b) Insulator in the dark are becomes conductor when exposed to light

Which compound is briefly exposed to light when taking a photograph?

Description : Which compound is briefly exposed to light when taking a photograph? 

Last Answer : ANSWER: SILVER CHLORIDE

The soft silvery metalic element which ionizes easily when heated or exposed to light and is present in atomic clocks is : (1) Cerium (2) Cesium (3) Calcium (4) Califonrium

Description : The soft silvery metalic element which ionizes easily when heated or exposed to light and is present in atomic clocks is : (1) Cerium (2) Cesium (3) Calcium (4) Califonrium

Last Answer : Cesium

Printer ML3471ND won't print on both sides of paper.

Description : Printer ML3471ND won't print on both sides of paper.

Last Answer : answer:Open System Preferences > Printers & Scanners and select the Samsung in the Printers list. Then click on Options & Supplies and then the Options tab. If you see an entry about the Duplex/2-sided ... option to print duplex. Also check (or recheck) the manual if you haven't done so already.

How can i print white letters/graphics on dark (brown) paper?

Description : How can i print white letters/graphics on dark (brown) paper?

Last Answer : answer:Honestly i think your best bet is going to be to not print directly on the brown paper. I think the better solution would be to print on clear plastic labels, and print white text, and then peel ... then stick the clear plastic to the brown paper. ...Let me know if you have questions! :-)

What would you use to print a wage slip using carbonised paper?

Description : What would you use to print a wage slip using carbonised paper?

Last Answer : Need answer

If metal is so cumbersome why should we not have only paper money why should we not print as much of it as possible?

Description : If metal is so cumbersome why should we not have only paper money why should we not print as much of it as possible?

Last Answer : Paper is lighter than metal, it also saves use of silver and other metals when they are scarce. Perhaps you may ask "Then why not have paper money only?" The answer is, it would be impossible ... the right amount of paper money that would keep prices at their proper natural level.Hope it helps!!!

What are some special inks and paper are used to print money?

Description : What are some special inks and paper are used to print money?

Last Answer : In 2010, the Bureau of Engraving and Printing in the UnitedStates printed 26 million notes every day! They have twofacilities where the notes are printed: Washington, DC and ... Bureau works veryclosely with the Secret Service and Federal Reserve Bank to designanti-counterfeiting features.

If metal is so cumbersome why should we not have only paper money why should we not print as much of it as possible?

Description : If metal is so cumbersome why should we not have only paper money why should we not print as much of it as possible?

Last Answer : Paper is lighter than metal, it also saves use of silver and other metals when they are scarce. Perhaps you may ask "Then why not have paper money only?" The answer is, it would be impossible ... the right amount of paper money that would keep prices at their proper natural level.Hope it helps!!!

Can I print out photos on photo paper with normal ink?

Description : Can I print out photos on photo paper with normal ink?

Last Answer : It can work but not very well. Usually the pictures will not come out right and the ink does not set into the photo paper causing it to smear or appear runny.

Which country was the first to print paper money?

Description : Which country was the first to print paper money?

Last Answer : america

Which printers produce output by mechanical contact between the print head and paper? A. Impact B. Non-impact C. Both (A) and (B) D. None of the Above

Description : Which printers produce output by mechanical contact between the print head and paper? A. Impact B. Non-impact C. Both (A) and (B) D. None of the Above

Last Answer : A. Impact

__________ printers print the characters by striking them on the ribbon which is then pressed on the paper. A. Impact B. Non Impact C. Both (A) and (B) D. None of the Above

Description : __________ printers print the characters by striking them on the ribbon which is then pressed on the paper. A. Impact B. Non Impact C. Both (A) and (B) D. None of the Above

Last Answer : A. Impact

Why does itunes home sharing disappear after i hit done?

Description : Why does itunes home sharing disappear after i hit done?

Last Answer : Are you using iTunes 9 with this? It looks like the program is the issue, not you. Now it’s up to Apple to develop a fix for this jolly little error in the next major update.

Why does the windows 7 run dialog box disappear after I hit enter?

Description : Why does the windows 7 run dialog box disappear after I hit enter?

Last Answer : Open run type CMD, hit enter then type ipconfig /all

Are tulips and daffodils supposed to disappear after they bloom?

Description : Are tulips and daffodils supposed to disappear after they bloom?

Last Answer : They only last a couple of weeks, you might have something eating the leaves..............you can use a dawn 2 tablespoons & 1 qt water and spray......................or use neem oil spray............repeat when it rains. Have you seen any ants around them............?

Does an elongated scar disappear after weight loss?

Description : Are you retreating? Will it be less visible?

Last Answer : It will look less, but it will never be the same before.

Will tattoos disappear after a few years?

Description : I'm thinking of having a rose tattooed over my ass. But should I be there forever? Even in 50 years? Will it never go away?

Last Answer : But yes, it will disappear, although not completely. It cuts the skin where there is a tattoo and scars may remain, but those like the 60-year-old grandmother won't mind.

Occasional sensitivity in a shallow class I amalgam restoration after two days would be managed by: A. Replace old filing immediately B. Oxide Zinc and eugenol C. Using thicker mix of cements D. Tell patient the discomfort will disappear after 4 t o6 weeks E. Ledermix

Description : Occasional sensitivity in a shallow class I amalgam restoration after two days would be managed by: A. Replace old filing immediately B. Oxide Zinc and eugenol C. Using thicker mix of cements D. Tell patient the discomfort will disappear after 4 t o6 weeks E. Ledermix

Last Answer : D. Tell patient the discomfort will disappear after 4 t o6 weeks

What are the upsides and the downsides of thermal paper esp. for receipts?

Description : What are the upsides and the downsides of thermal paper esp. for receipts?

Last Answer : answer:We used to use it at the theater for the tickets. The printers used it so we never had to worry about toner or ink. It just printed with heat. The weird thing is if you placed a ticket ... at Wal*Mart are printed on paper where the text disappears in a few weeks so you can't return shit.

Which one among the following industries is the maximum consumer of water in India? (1) paper and Pulp (2) Thermal Power (3) Engineering (4) Textile

Description : Which one among the following industries is the maximum consumer of water in India? (1) paper and Pulp (2) Thermal Power (3) Engineering (4) Textile

Last Answer : (2) Thermal Power Explanation: Indian Thermal Power Plants are one of the highest consumers of water as compared to their global counterparts. On an average, for every 1000 Kwh power, Indian TPPs consume as much as 80 cubic meters of water. It consumes 87.87% of industrial water use in India.

Direct Thermal printer does not use _________ A. heat B. coated paper C. ribbon D. None of the Above

Description : Direct Thermal printer does not use _________ A. heat B. coated paper C. ribbon D. None of the Above

Last Answer : C. ribbon

A thermal transfer printer is a ________ printer that uses heat to register an impression on paper. A. Impact B. Non-impact C. Both (A) and (B) D. None of the Above

Description : A thermal transfer printer is a ________ printer that uses heat to register an impression on paper. A. Impact B. Non-impact C. Both (A) and (B) D. None of the Above

Last Answer : B. Non-impact

The main industrial source of emission of hydrogen sulphide air pollutant is (A) Petroleum refineries (B) Coal based thermal power plants (C) Pulp and paper plant (D) Metallurgical roasting & smelting plant

Description : The main industrial source of emission of hydrogen sulphide air pollutant is (A) Petroleum refineries (B) Coal based thermal power plants (C) Pulp and paper plant (D) Metallurgical roasting & smelting plant

Last Answer : (B) Coal based thermal power plants

Which of the following printer types requires special paper: a) chain b) thermal c) laser d) None of The Above

Description : Which of the following printer types requires special paper: a) chain b) thermal c) laser d) None of The Above

Last Answer : b) thermal

A (n) ______printer works by spraying tiny droplets of ink onto the paper: a) ink - jet b) laser c) thermal d) None of The Above

Description : A (n) ______printer works by spraying tiny droplets of ink onto the paper: a) ink - jet b) laser c) thermal d) None of The Above

Last Answer : a) ink - jet

what are symptoms of dry socket after wisdom tooth extraction that left sinus cavity exposed?

Description : what are symptoms of dry socket after wisdom tooth extraction that left sinus cavity exposed?

Last Answer : You will have severe pain. Your doctor can pack the extraction site/sites with a medicated sterile gauze. DO NOT drink through a straw. Will cause the clot to come out of the socket which is the beginning of the healing process. Good luck.

How much extra radiation am I exposed to if I stick my hand in the microwave right after it turns off? -Physics

Description : How much extra radiation am I exposed to if I stick my hand in the microwave right after it turns off? -Physics

Last Answer : You are actually exposed to less radiation if you stick your hand in a properly functioning microwave oven right after it turns off. First of all, the microwaves emitted by a microwave oven are not ... the radiation you are exposed to is so low-energy that there is nothing to be concerned about.

How long does take to get flu after exposed?

Description : How long does take to get flu after exposed?

Last Answer : Need answer

How long after being exposed to a cold does it take for you he symptoms to show?

Description : How long after being exposed to a cold does it take for you he symptoms to show?

Last Answer : What is the answer ?

The primary succession refers to the development of communities on a (a) forest clearing after devastating fire (b) newly-exposed habitat with no record of earlier vegetation (c) freshly cleared crop field (d) pond, freshly filled with water after a dry phase.

Description : The primary succession refers to the development of communities on a (a) forest clearing after devastating fire (b) newly-exposed habitat with no record of earlier vegetation (c) freshly cleared crop field (d) pond, freshly filled with water after a dry phase.

Last Answer : (b) newly-exposed habitat with no record of earlier vegetation

If a person has been exposed to radiation, presenting symptoms, such as nausea, vomiting, loss of appetite, diarrhea, or fatigue can be expected to occur within _______ hours after exposure? a) 48 to 72 The prodromal phase (presenting symptoms) of radiation exposure occurs within 48 to 72 hours after exposure. Signs and symptoms include nausea, vomiting, loss of appetite, diarrhea, and fatigue. With high-dose radiation exposure, the signs and symptoms may include fever, respiratory distress, and increased excitability.

Description : If a person has been exposed to radiation, presenting symptoms, such as nausea, vomiting, loss of appetite, diarrhea, or fatigue can be expected to occur within _______ hours after exposure? ... prodromal phase (presenting symptoms) of radiation exposure occurs within 48 to 72 hours after exposure.

Last Answer : a) 48 to 72 The prodromal phase (presenting symptoms) of radiation exposure occurs within 48 to 72 hours after exposure. Signs and symptoms include nausea, vomiting, loss of appetite, ... radiation exposure, the signs and symptoms may include fever, respiratory distress, and increased excitability.

An 8 years-old child who has sustained a fracture of maxillary permanent central incisor in which 2mm of the pulp is exposed presents for treatment three hours after injury. Which of the following should be considered? a- Remove the surface 1. 2 mm of pulp tissue and place calcium hydroxide. b- Place calcium hydroxide directly on the exposed pulp. c- Pulpotomy using formocresol. d- Pulpectomy and immediate root filling. e- Pulpectomy and apexification.

Description : An 8 years-old child who has sustained a fracture of maxillary permanent central incisor in which 2mm of the pulp is exposed presents for treatment three hours after injury. Which of the ... - Pulpotomy using formocresol. d- Pulpectomy and immediate root filling. e- Pulpectomy and apexification.

Last Answer : a- Remove the surface 1. 2 mm of pulp tissue and place calcium hydroxide

8 years old child who has sustained a fracture of maxillary permanent central incisor in which 2mm of the pulp is exposed; presents for treatment three hours after injury. Which of the following should be considered? M07*********** A. Remove the surface 1-2 mm of pulp tissue and place calcium hydroxide (Cvek pulpotomy, apexogenesis) B. Place calcium hydroxide directly on the exposed pulp C. Pulpotomy using formocresol D. Pulpectomy and immediate root filling E. Pulpectomy and apexification

Description : 8 years old child who has sustained a fracture of maxillary permanent central incisor in which 2mm of the pulp is exposed; presents for treatment three hours after injury. Which of the ... C. Pulpotomy using formocresol D. Pulpectomy and immediate root filling E. Pulpectomy and apexification

Last Answer : A. Remove the surface 1-2 mm of pulp tissue and place calcium hydroxide (Cvek pulpotomy, apexogenesis)