Regenerative repeaters are placed along the communication path to control:

Regenerative repeaters are placed along the communication path to control: 

a. Power b. Noise c. Frequency d. Amplitude 
by

1 Answer

Answer :

Regenerative repeaters are placed along the communication path to control: Noise 

by

Related questions

Where the poles should be placed on the unit circle for stable filter?

Description : Where the poles should be placed on the unit circle for stable filter?  a. Outside b. Inside c. both a & b d. none of the above

Last Answer : Where the poles should be placed on the unit circle for stable filter?  a. Outside b. Inside c. both a & b d. none of the above

What type of communication use Radio waves:

Description : What type of communication use Radio waves:  a. Unicast b. Both (a) and (c) can be used c. Multicast d. None of the above 

Last Answer : What type of communication use Radio waves: Multicast 

In communication satellite, multiple repeaters are known as a. detector b. modulator c. stations d. transponders

Description : In communication satellite, multiple repeaters are known as a. detector b. modulator c. stations d. transponders

Last Answer : transponders

An evanescent mode occurs when:

Description : An evanescent mode occurs when:  a. A wave is attenuated rather than propagated. b. The propagation constant is purely imaginary. c. m = 0 = n so that all field components vanish. d. The wave frequency is the same as the cutoff frequency. 

Last Answer : An evanescent mode occurs when: A wave is attenuated rather than propagated.

A half wavelength Dipole antenna has _________ Radiation Pattern

Description : A half wavelength Dipole antenna has _________ Radiation Pattern  a. Hemispherical b. Omni-Directional c. Isotropic d. End fire

Last Answer : A half wavelength Dipole antenna has Omni-Directional Radiation Pattern 

An antenna located in a city is a source of radio waves. How much time does it take the wave to reach a town

Description : An antenna located in a city is a source of radio waves. How much time does it take the wave to reach a town 12,000 km away from the city?  a. 36 s b. 20 us c. 20 ms d. 40 ms 

Last Answer : An antenna located in a city is a source of radio waves. How much time does it take the wave to reach a town 12,000 km away from the city?  a. 36 s b. 20 us c. 20 ms d. 40 ms 

At Service provider end IMEI number of MS is basically stored in:

Description : At Service provider end IMEI number of MS is basically stored in:  a. HLR b. VLR c. AUC d. EIR

Last Answer : At Service provider end IMEI number of MS is basically stored in:  a. HLR b. VLR c. AUC d. EIR

Which cable connects the subscriber telephone to the nearest end office in the local loop

Description : Which cable connects the subscriber telephone to the nearest end office in the local loop.  a. Coaxial b. Fiber-optic c. Twisted-pair d. Both (b) and (c)

Last Answer : Which cable connects the subscriber telephone to the nearest end office in the local loop.  a. Coaxial b. Fiber-optic c. Twisted-pair d. Both (b) and (c)

Unlike coax and twisted pair, optical fibers are immune to

Description : Unlike coax and twisted pair, optical fibers are immune to  a. High-frequency transmission b. Signal attenuation c. Power loss d. Electromagnetic interference

Last Answer : Unlike coax and twisted pair, optical fibers are immune to Electromagnetic interference

The Fourier transform of a gate pulse is:

Description : The Fourier transform of a gate pulse is:  a. Sinc function b. Triangular function c. Gate function d. Unit step unction

Last Answer : The Fourier transform of a gate pulse is: Sinc function

Which of these materials requires the least value of magnetic field strength to magnetize it?

Description : Which of these materials requires the least value of magnetic field strength to magnetize it?  a. Nickel b. Silver c. Tungsten d. Sodium chloride 

Last Answer : Which of these materials requires the least value of magnetic field strength to magnetize it?  a. Nickel b. Silver c. Tungsten d. Sodium chloride 

Radio frequency ranges from 30MHz to 1GHz and it is suitable for:

Description : Radio frequency ranges from 30MHz to 1GHz and it is suitable for:  a. Point to point transmission b. Omni directional transmission c. Local point to point transmission d. None of the above

Last Answer : Radio frequency ranges from 30MHz to 1GHz and it is suitable for: Local point to point transmission

Fast fading occurs if the channel____________ changes rapidly within the symbol duration.

Description : Fast fading occurs if the channel____________ changes rapidly within the symbol duration.  a. Bandwidth b. Frequency c. Impulse response d. None of the above 

Last Answer : Fast fading occurs if the channel Impulse response changes rapidly within the symbol duration. 

As we know when there is a joint in optical fiber then there will be some loss then this loss be minimized by

Description : As we know when there is a joint in optical fiber then there will be some loss then this loss be minimized by  a. Using index matching fluid in the gap b. Making V-grooved splicing c. Both (a)and (b) d. Making carefully polishing

Last Answer : As we know when there is a joint in optical fiber then there will be some loss then this loss be minimized by Using index matching fluid in the gap

Portable repeaters for first responders?

Description : Portable repeaters for first responders?

Last Answer : Yes they can, here you go ! ! !

How can I create a background beat in Minecraft using redstone repeaters?

Description : How can I create a background beat in Minecraft using redstone repeaters?

Last Answer : There is a fluther minecraft server?

How many types of repeaters ?

Description : How many types of repeaters ?

Last Answer : There are two types of repeaters . Namely- 1) Amplifier 2) Signal Regenerating

Where are cell antenna repeaters available?

Description : Where are cell antenna repeaters available?

Last Answer : You can obtain cell antenna repeaters at the following: www.Amazon.com, www.ebay.com, www.overstock.com, cellantenna.com/ and cellantenna.com/index.php?id=info.

Wireless Router Repeaters Boost Wi-Fi Signals?

Description : Wireless Router Repeaters Boost Wi-Fi Signals?

Last Answer : A wireless router repeater, also known as a wireless range extender, is a way to extend the range of a WI-Fi signal. It is used by people who want to make their Wi-Fi signal reach ... . To use a wireless router repeater, place it halfway between the router and the computer receiving the signal.

The diagrams shown in the illustration represent a/an _______________. EL-0093 A. engine order telegraph circuit B. rudder angle indicator arrangement C. engine speed tachometer with repeaters D. sound powered telephone system

Description : The diagrams shown in the illustration represent a/an _______________. EL-0093 A. engine order telegraph circuit B. rudder angle indicator arrangement C. engine speed tachometer with repeaters D. sound powered telephone system

Last Answer : Answer: D

Repeaters inside communications satellites are known as A. Trancievers B. Transponders C. Transducers D. TWT

Description : Repeaters inside communications satellites are known as A. Trancievers B. Transponders C. Transducers D. TWT

Last Answer : B. Transponders

These are used to connect non-ISDN equipment ot ISDN line. A. Digipeaters B. Terminal adapters C. Local repeaters D. Terminal repeaters

Description : These are used to connect non-ISDN equipment ot ISDN line. A. Digipeaters B. Terminal adapters C. Local repeaters D. Terminal repeaters

Last Answer : B. Terminal adapters

Digital transmission provides a higher level of signal quality than analog transmission because A. repeaters regenerate digital pulses and remove distorstion B. digital signals are easier to sample than analog signals C. digital signals are smaller than analog signals and cannot easily be distorted D. analog signals are continuous and not easily distorted.

Description : Digital transmission provides a higher level of signal quality than analog transmission because A. repeaters regenerate digital pulses and remove distorstion B. digital signals are easier to sample than ... and cannot easily be distorted D. analog signals are continuous and not easily distorted.

Last Answer : A. repeaters regenerate digital pulses and remove distorstion

Consider a CSMA/CD network that transmits data at a rate of 100 Mbps (108 bits per second) over a 1 km (kilometre) cable with no repeaters. If the minimum frame size required for this network is 1250 bytes, what is the signal speed (km/sec) in the cable? a. 8000 b. 10000 c. 16000 d. 20000

Description : Consider a CSMA/CD network that transmits data at a rate of 100 Mbps (108 bits per second) over a 1 km (kilometre) cable with no repeaters. If the minimum frame size required for this network is 1250 bytes, what is the signal speed (km/sec) in the cable? a. 8000 b. 10000 c. 16000 d. 20000

Last Answer : d. 20000

………………... are needed to communicate with systems on other networks.A. repeaters B. amplifiers C. Bridge D. Gateways

Description : ………………... are needed to communicate with systems on other networks. A. repeaters B. amplifiers C. Bridge D. Gateways

Last Answer : D. Gateways

. Which fiber-optic system is better? ∙ A. 3 repeaters ∙ B. 8 repeaters ∙ C. 11 repeaters ∙ D. 20 repeaters

Description : . Which fiber-optic system is better? ∙ A. 3 repeaters ∙ B. 8 repeaters ∙ C. 11 repeaters ∙ D. 20 repeaters

Last Answer : A. 3 repeaters

Which fiber-optic system is better? ∙ a. 3 repeaters ∙ b. 8 repeaters ∙ c. 11 repeaters ∙ d. 20 repeaters

Description : Which fiber-optic system is better? ∙ a. 3 repeaters ∙ b. 8 repeaters ∙ c. 11 repeaters ∙ d. 20 repeaters

Last Answer : a. 3 repeaters

Typically, repeaters are not required for fiber-optic cable lengths up to: a. 1000 miles b. 100 miles c. 100 km d. 10 km

Description : Typically, repeaters are not required for fiber-optic cable lengths up to: a. 1000 miles b. 100 miles c. 100 km d. 10 km

Last Answer : c. 100 km

In the following list of devices, which device is used in datalink layer? (1) Repeaters (2) Routers (3) Application gateway (4) Bridge

Description : In the following list of devices, which device is used in datalink layer? (1) Repeaters (2) Routers (3) Application gateway (4) Bridge

Last Answer : Bridge

In the following list of devices which device is used in network layer? (1) Repeaters (2) Router (3) Application Gateway (4) Switch

Description : In the following list of devices which device is used in network layer? (1) Repeaters (2) Router (3) Application Gateway (4) Switch

Last Answer : Router

A light paddle wheel placed in the path of________will rotate.

Description : A light paddle wheel placed in the path of________will rotate.

Last Answer : A light paddle wheel placed in the path of________will rotate. A. cathode rays B. `alpha`-rays C. `beta`-rays D. All the above

A concave lens is placed in the path of convergent rays. The rays are focussed on the axis 15 cm behind the lens. Where would these rays have been foc

Description : A concave lens is placed in the path of convergent rays. The rays are focussed on the axis 15 cm behind the lens. Where would these rays have been foc

Last Answer : A concave lens is placed in the path of convergent rays. The rays are focussed on the axis 15 cm behind ... lens ? Focal length of the lens is 30 cm.

What is the full form of AS/RS in FMS? a.Automated storage and recovery system b.Automatic storage and rotary system c.Automated storage and retrieval system d.Automated storage and regenerative system

Description : What is the full form of AS/RS in FMS? a.Automated storage and recovery system b.Automatic storage and rotary system c.Automated storage and retrieval system d.Automated storage and regenerative system

Last Answer : c.Automated storage and retrieval system

Which one of the following cell I totipotent and responsible for regenerative capacity in sponges ?

Description : Which one of the following cell I totipotent and responsible for regenerative capacity in sponges ?

Last Answer : Which one of the following cell I totipotent and responsible for regenerative capacity in sponges ? ... B. Thesocytes C. Archaeocytes D. Scleroblast

Assertion : Epithelia are highly regenerative. Reason : When epithelia gets damaged they regenerate more repidly then other Tissue.

Description : Assertion : Epithelia are highly regenerative. Reason : When epithelia gets damaged they regenerate more repidly then other Tissue.

Last Answer : Assertion : Epithelia are highly regenerative. Reason : When epithelia gets damaged they regenerate more ... . If both Assertion & Reason are false.

Which cells in our body have the least regenerative power? (1) Brain cells (2) Muscle cells (3) Bone cells (4) Liver cells

Description : Which cells in our body have the least regenerative power? (1) Brain cells (2) Muscle cells (3) Bone cells (4) Liver cells

Last Answer : (1) Brain cells Explanation: Brain cells do not regenerate. Once lost, they do not come back. Research from Karolinska Institute in Sweden haves shown that the nerve cells of the brain remain the same throughout a person's life.

Which cells in our body have the least regenerative power? (1) Brain cells (2) Muscle cells (3) Bone cells (4) Liver cells

Description : Which cells in our body have the least regenerative power? (1) Brain cells (2) Muscle cells (3) Bone cells (4) Liver cells

Last Answer : (1) Brain cells Explanation: Brain cells do not regenerate. Once lost, they do not come back. Research from Karolinska Institute in Sweden haves shown that the nerve cells of the brain remain the same throughout a person's life.

The progressive operation of the contactors marked 'A' provide the winch shown in the illustration with __________. EL-0102 A. accumulation B. dynamic braking C. acceleration D. regenerative braking

Description : The progressive operation of the contactors marked 'A' provide the winch shown in the illustration with __________. EL-0102 A. accumulation B. dynamic braking C. acceleration D. regenerative braking

Last Answer : Answer: C

A motor using a rheostat in the motor circuit to vary the speed is called a ____________. A. squirrel-cage induction motor B. regenerative braking motor C. wound-rotor induction motor D. synchronous motor

Description : A motor using a rheostat in the motor circuit to vary the speed is called a ____________. A. squirrel-cage induction motor B. regenerative braking motor C. wound-rotor induction motor D. synchronous motor

Last Answer : Answer: C

What Is Meant By Regenerative Braking?

Description : What Is Meant By Regenerative Braking?

Last Answer : When the supply is cutt off for a running motor, it still continue running due to inertia. In order to stop it quickly we place a load(resitor) across the armature winding and the motor should ... and due to load the motor stops quickly.This type of breaking is called as Regenerative Breaking .

A form of regenerative repeater for transmitting signals over a long cable received through a relay in a clearer form. A. Active generator B. Active repeater C. Interpolator D. Audio generator

Description : A form of regenerative repeater for transmitting signals over a long cable received through a relay in a clearer form. A. Active generator B. Active repeater C. Interpolator D. Audio generator

Last Answer : C. Interpolator

Which of the following is a non-regenerative fixed bed catalytic reforming process? (A) Hydroforming (B) Thermofor catalytic reforming (C) Platforming (D) Hyperforming

Description : Which of the following is a non-regenerative fixed bed catalytic reforming process? (A) Hydroforming (B) Thermofor catalytic reforming (C) Platforming (D) Hyperforming

Last Answer : (C) Platforming

Platforming is a __________ process. (A) Moving bed (B) Fluidised bed (C) Non-regenerative & fixed bed (D) Regenerative

Description : Platforming is a __________ process. (A) Moving bed (B) Fluidised bed (C) Non-regenerative & fixed bed (D) Regenerative

Last Answer : (C) Non-regenerative & fixed bed

In regenerative air preheater (as practised in heating of coke ovens), the heat is transferred (A) Through a metallic wall (B) By direct contact of hot flue gas with air (C) By heating an intermediate material (like chequor bricks) and then heating the air from this hot material (D) None of these

Description : In regenerative air preheater (as practised in heating of coke ovens), the heat is transferred (A) Through a metallic wall (B) By direct contact of hot flue gas with air (C) By ... material (like chequor bricks) and then heating the air from this hot material (D) None of these

Last Answer : (C) By heating an intermediate material (like chequor bricks) and then heating the air from this hot material

What is meant by regenerative braking?

Description : What is meant by regenerative braking?

Last Answer : When the supply is cut off for a running motor, it still continue running due to inertia. In order to stop it quickly we place a load (resistor) across the armature winding and the motor should ... and due to load the motor stops quickly. This type of breaking is called as Regenerative Breaking .

Pot furnace which is either regenerative or recuperative, is used in the manufacture of (A) Glass (B) Stainless steel (C) Potteries (D) Refractory bricks

Description : Pot furnace which is either regenerative or recuperative, is used in the manufacture of (A) Glass (B) Stainless steel (C) Potteries (D) Refractory bricks

Last Answer : (A) Glass

Operation of blast furnace stove is based on the principles of a __________ furnace. (A) Regenerative (B) Recuperative (C) Both (A) and (B) (D) Neither (A) nor (B)

Description : Operation of blast furnace stove is based on the principles of a __________ furnace. (A) Regenerative (B) Recuperative (C) Both (A) and (B) (D) Neither (A) nor (B)

Last Answer : (A) Regenerative

Which is a regenerative furnace? (A) Coke oven heating chamber (B) Open hearth furnace (C) Both (A) and (B) (D) Neither (A) nor (B)

Description : Which is a regenerative furnace? (A) Coke oven heating chamber (B) Open hearth furnace (C) Both (A) and (B) (D) Neither (A) nor (B)

Last Answer : (C) Both (A) and (B)

For a given set of operating pressure limits of a Rankine cycle, the highest, efficiency occurs for [GATE-1994] (a) Saturated cycle (b) Superheated cycle (c) Reheat cycle (d) Regenerative cycle.

Description : For a given set of operating pressure limits of a Rankine cycle, the highest, efficiency occurs for [GATE-1994] (a) Saturated cycle (b) Superheated cycle (c) Reheat cycle (d) Regenerative cycle. 

Last Answer : (d) Regenerative cycle. 

Types of waste heat exchanger are: a) Regenerative and recuperative burners b) Economizers c) Waste heat boilers d) All of the above

Description : Types of waste heat exchanger are: a) Regenerative and recuperative burners b) Economizers c) Waste heat boilers d) All of the above

Last Answer : All of the above