Description : Which of the following is a non-regenerative fixed bed catalytic reforming process? (A) Hydroforming (B) Thermofor catalytic reforming (C) Platforming (D) Hyperforming
Last Answer : (C) Platforming
Description : Thermofor catalytic cracking process is a __________ process. (A) Fixed bed (B) Moving bed (C) Fluidised bed (D) Non-catalytic
Last Answer : (D) Non-catalytic
Description : Kopper-Totzek coal gasifier (installed in a coal based nitrogeneous fertiliser plant) employs a/an __________ bed gasifier. (A) Entrained (B) Moving (C) Fixed (D) Fluidised
Last Answer : (A) Entrained
Description : Lurgi coal gasifier is a pressurised __________ bed reactor. (A) Moving (B) Fixed (C) Fluidised (D) Entrained
Last Answer : (A) Moving
Description : . Lurgi coal gasifier is a pressurised __________ bed reactor. (A) Moving (B) Fixed (C) Fluidised (D) Entrained
Description : Which of the following is the most widely used cracking process in oil refineries? (A) Dubbs process (B) T.C.C. moving bed process (C) Fluidised bed catalytic cracking process (D) Houdry's fixed bed process
Last Answer : (C) Fluidised bed catalytic cracking process
Description : Which of the following is used for calcination of limestone and dolomite in industrial practice? (A) Fluidised bed reactor (B) Moving bed reactor (C) Fixed bed reactor (D) None of these
Last Answer : (B) Moving bed reactor
Description : For high conversion in a highly exothermic solid catalysed reaction, use a __________ bed reactor. (A) Fixed (B) Fluidised bed reactor followed by a fixed (C) Fixed bed reactor followed by a fluidised (D) Fluidised
Last Answer : (B) Fluidised bed reactor followed by a fixed
Description : Oil is hydrogenated using nickel catalyst in a __________ reactor. (A) Batch (B) Slurry (C) Fluidised bed (D) Fixed bed
Last Answer : (B) Slurry
Description : Calcination of limestone is not done in a __________ kiln for producing lime. (A) Vertical shaft (B) Rotary (C) Fluidised bed (D) Fixed bed
Last Answer : (D) Fixed bed
Description : Which of the following will give maximum gas conversion? (A) Fixed bed reactor (B) Fluidised bed reactor (C) Semi-fluidised bed reactor (D) Plug-flow catalytic reactor
Last Answer : (C) Semi-fluidised bed reactor
Description : Heat transfer by __________ is almost absent in case of fluidised bed drying operation. (A) Radiation (B) Conduction (C) Convection (D) Both (B) & (C)
Last Answer : A) Radiation
Description : Hypersorption refers to a __________ process. (A) Fixed bed absorption (B) Moving bed absorption (C) Fixed bed adsorption (D) Moving bed adsorption
Last Answer : (D) Moving bed adsorption
Description : Sticky material can be dried in a __________ dryer. (A) Tray (B) Rotary (C) Fluidised bed (D) None of these
Last Answer : (A) Tray
Description : Paper industry employs __________ driers. (A) Cylinder (B) Rotary (C) Spray (D) Fluidised bed
Last Answer : (A) Cylinder
Description : Large scale drying of wheat is done in a __________ dryer. (A) Fluidised bed (B) Spouted bed (C) Tray (D) Vacuum rotary
Last Answer : (B) Spouted bed
Description : The uniformity of a gas fluidised bed depends upon the __________ of the solid particles. (A) Size (B) Surface properties (C) Both (A) and (B) (D) Neither (A) nor (B)
Last Answer : (C) Both (A) and (B)
Description : Pressure drop in a fluidised bed reactor is __________ that in a similar packed bed reactor. (A) Less than (B) Greater than (C) Same as (D) None of these
Last Answer : (B) Greater than
Description : For a fluidised bed reactor, the most suitable/relevant model is a __________ model. (A) Tank in series (B) Bubbling bed (C) Plug flow (D) None of these
Last Answer : (B) Bubbling bed
Description : Which of the following is the most suitable feed for platforming process (reforming)? (A) Olefinic hydrocarbon (B) Naphtha (C) Fuel oil (D) Atmospheric residue
Last Answer : (A) Olefinic hydrocarbon
Description : Advantages of fluidised bed combustion are (A) Reduced NOx formation in flue gas (B) Lower furnace operating temperature (C) High heat transfer rate (D) All (A), (B) & (C)
Last Answer : (D) All (A), (B) & (C)
Description : Slugging occurs in a fluidised bed, if the bed is (A) Narrow (B) Deep (C) Both (A) & (B) (D) Neither (A) nor (B)
Last Answer : (C) Both (A) & (B)
Description : AS -10 (Accounting Standard on Fixed Assets) does not deal with accounting for the following items to which special considerations apply A. Forests, plantations and similar regenerative natural ... resources C. Expenditure on real estate development and livestock D. None of the above
Last Answer : D. None of the above
Description : . Which of the following is used as a catalyst in fluidised bed catalytic cracking? (A) Silica-magnesia (B) Silica-alumina (C) Bentonite clays (D) All (A), (B) and (C
Last Answer : (D) All (A), (B) and (C
Description : . The most widely used crude topping column in refineries is the__________ column. (A) Bubble-cap (B) Packed bed (C) Fluidised bed (D) Perforated plate
Last Answer : (A) Bubble-cap
Description : Sand is dried in foundries in a _________drier. (A) Rotary (B) Fluidised bed (C) Vacuum (D) Spray
Last Answer : (B) Fluidised bed
Description : Which of the following is not a batch drier? (A) Truck drier (B) Agitated pan drier (C) Fluidised bed drier (D) Vacuum shelf drier
Last Answer : (C) Fluidised bed drier
Description : Which of the following is not applicable to fluidised bed combustion of coal? (A) It cannot burn low grade coal (B) It achieves higher fuel combustion efficiency (C) Less heat transfer surface area is required in boilers (D) None of these
Last Answer : (A) It cannot burn low grade coal
Description : Slugging in a fluidised bed can be avoided by using (A) Tall narrow vessel (B) Deep bed of solids (C) Shallow beds of solids and proper choice of particle size (D) Very large particles
Last Answer : (C) Shallow beds of solids and proper choice of particle size
Description : . A 0.5 m high bed made up of a 1 mm dia glass sphere (density 2500 kg/m3 ) is to be fluidised by water (density 1000 kg/m3 ). If at the point of incipient fluidisation, the bed voidage is 40%, the pressure drop across the bed is (A) 4.4 KPa (B) 2.94 KPa (C) 3.7 KPa (D) None of these
Last Answer : (A) 4.4 KPa
Description : Bed pressure drop in an air fluidised bed of catalyst particles (ρp = 200 kg/m3, Dp = 0.05 cm) of 60 cm bed depth and bed porosity of 0.5 expressed in cm of water (manometer) is (A) 90 (B) 60 (C) 45 (D) 30
Last Answer : (B) 60
Description : Minimum porosity for fluidisation is (A) That corresponding to static bed (B) That corresponding to completely fluidised bed (C) The porosity of the bed when true fluidisation begins (D) Less than that of the' static bed
Last Answer : (C) The porosity of the bed when true fluidisation begins
Description : A bed of spherical particles (specific gravity 2.5) of uniform size 1500 μm is 0.5 m in diameter and 0.5 m high. In packed bed state, the porosity may be taken as 0.4. Ergun's equation for the above fluid-particle system ... What is the porosity of the fluidised bed? (A) 0.2 (B) 0.5 (C) 0.7 (D) 0.8
Last Answer : (C) 0.7
Description : In a fluidised bed reactor (A) Temperature gradients are very high (B) Temperature is more or less uniform (C) Hot spots are formed (D) Segregation of the solids occurs
Last Answer : (B) Temperature is more or less uniform
Description : Which of the following is the most suitable for very high pressure gas phase reaction? (A) Batch reactor (B) Tubular flow reactor (C) Stirred tank reactor (D) Fluidised bed reactor
Last Answer : (B) Tubular flow reactor
Description : Fluidised bed reactor is characterised by (A) Uniformity of temperature (B) Comparatively smaller equipment (C) Very small pressure drop (D) Absence of continuous catalyst regeneration facility
Last Answer : (A) Uniformity of temperature
Description : Commercial scale production of hydrogen from iron-steam reaction represented by, 3Fe + 3H2O = Fe3O4 + 4H2 , is not practised, as it is (A) A slow reaction (B) A discontinuous reaction (requiring regeneration of ... in development stage (by employing fluidised bed technique) (D) All (A), (B) and (C)
Last Answer : (D) All (A), (B) and (C)
Description : Explain the difference between AFBC, BFBC, PFBC and PCFB in regard to fluidised bed technologies.
Last Answer : AFBC (Atmospheric fluidised bed combustion) process consists of forming a bed of inert materials like finely sized ash or ash mixed with sand, limestone (for sulphur removal), and solid fuel particles in ... the bed as bubbles (fluidised bed) and gives the bed the appearance of a boiling liquid.
Description : State some advantages of fluidised bed boilers?
Last Answer : Any type of fuel - solid, liquid (or) gaseous fuel (or) domestic and industrial waste can be used in FBC system. Any type- of combustible matter can be burned by adjusting the factors ... possible. High combustion efficiency. The solid fuel need not be pulverised in fluidised bed boilers.
Description : Write about fluidised bed boilers?
Last Answer : When the high velocity gas is passed through a packed bed of finely divided solid particles, the particles become suspended in the gas stream and the packed bed becomes a fluidised bed. When ... Bed Combustion. The boiler plant using this fluidised bed combustion is known as fluidised bed boilers.
Description : Give the principle and working of Fluidised bed dryer.
Last Answer : Principle: In FBD, good contact between hot air and particles to be dried is obtained which cause rapid drying. Working of Fluidised bed dryer: Two types of FBD are used in pharmaceutical industry. There are ... ranging from 5 kg to 200 kg with an average drying time of about 20-40 min.
Description : Write the advantages and disadvantages of fluidised bed dryer.
Last Answer : Advantages: i. It give high drying rate. ii. Suitable for thermolabile material. iii. Drying takes place of individual particles. iv. Temperature can be controlled. v. Prevent the ... : i. Turbulence produces cause attrition of particles. ii. Movement can generate electrical charges.
Description : Operation of blast furnace stove is based on the principles of a __________ furnace. (A) Regenerative (B) Recuperative (C) Both (A) and (B) (D) Neither (A) nor (B)
Last Answer : (A) Regenerative
Description : Octane number of gasoline produced by two stage fluidised catalytic cracking process is (A) 80 (B) 87 (C) 92 (D) 97
Last Answer : (D) 97
Description : The progressive operation of the contactors marked 'A' provide the winch shown in the illustration with __________. EL-0102 A. accumulation B. dynamic braking C. acceleration D. regenerative braking
Last Answer : Answer: C
Description : For nearly isothermal operation involving large reaction time in a liquid-phase reaction, the most suitable reactor is a __________ reactor. (A) Stirred tank (B) Tubular flow (C) Batch (D) Fixed bed
Last Answer : (A) Stirred tank
Description : Which of the following is a single stage, fixed bed high pressure coal gasification process? (A) Winkler process (B) Kopper-Totzek process (C) Lurgi Process (D) None of these
Last Answer : (C) Lurgi Process
Description : In regenerative air preheater (as practised in heating of coke ovens), the heat is transferred (A) Through a metallic wall (B) By direct contact of hot flue gas with air (C) By ... material (like chequor bricks) and then heating the air from this hot material (D) None of these
Last Answer : (C) By heating an intermediate material (like chequor bricks) and then heating the air from this hot material
Description : Pot furnace which is either regenerative or recuperative, is used in the manufacture of (A) Glass (B) Stainless steel (C) Potteries (D) Refractory bricks
Last Answer : (A) Glass
Description : Which is a regenerative furnace? (A) Coke oven heating chamber (B) Open hearth furnace (C) Both (A) and (B) (D) Neither (A) nor (B)