Description : The conversion of digital signal into analog for purposes of transmitting into the telephone line is done through ______. A. ISDN B. Radio C. RS232C D. Modem
Last Answer : D. Modem
Description : What equation defines the composition of an ISDN basic access line? A. B+2D B. B+D C. 2B+2D D. 2B+D
Last Answer : D. 2B+D
Description : The line control unit (LCU) operates on the data digital form. A. Data communications equipment (DCE) B. UART C. Modem D. Data terminal equipment (DTE)
Last Answer : D. Data terminal equipment (DTE)
Description : ___________ is a device in data transmission to interface data terminal equipment to an analogue transmission line. A. RS 232 B. Connector C. Modem D. RJ-11 plug
Last Answer : C. Modem
Description : Repeaters inside communications satellites are known as A. Trancievers B. Transponders C. Transducers D. TWT
Last Answer : B. Transponders
Description : Digital transmission provides a higher level of signal quality than analog transmission because A. repeaters regenerate digital pulses and remove distorstion B. digital signals are easier to sample than ... and cannot easily be distorted D. analog signals are continuous and not easily distorted.
Last Answer : A. repeaters regenerate digital pulses and remove distorstion
Description : In ISDN, what is the basic access B channel data rate? A. 32 kbps B. 64 kbps C. 144 kbps D. 16 kbps
Last Answer : B. 64 kbps
Description : What is the data rate of the ISDN Basic access B channel? A. 192 kbps B. 32 kbps C. 64 kbps D. 144 kbps
Last Answer : C. 64 kbps
Description : Which of the following is not referred to as data terminal equipment? A. Telephone set B. Printers C. Modem D. Computer
Description : Modem is referred to as ______. A. Universal asynchronous Rx/Tx B. Data communication equipment C. Universal synchronous Rx/Tx D. Data terminal equipment
Last Answer : B. Data communication equipment
Description : The primary purpose of the data modem is to A. interface analog terminal equipment to analog communications channel B. interface digital terminal equipment to analog communications ... to digital communications channel D. interface digital terminal equipment to digital communications channel
Last Answer : B. interface digital terminal equipment to analog communications channel
Description : Refers to a continuous tone generated in a local exchange terminal through a combination of two frequencies 350 Hz, and 440 Hz. A. Busy tone B. Call waiting tone C. Dial tone D. Standard tone
Last Answer : B. Call waiting tone
Description : State weather the following statement is true or false for ISDN - Integrated Services Digital Network ISDN is an effort to standardize subscriber services, provide user/network interfaces 2). the goal of ISDN is to form a Local ... C. 1. false, 2. false, 3. false D. 1. true, 2. true, 3. false
Last Answer : A. 1. True, 2. false, 3. true
Description : In transmission line, which of the following is the first step in the procedure of using stub matching? A. Calculate stub susceptance. B. Calculate load admittance C. Connect stub to load D. Transform conductance to resistance
Last Answer : B. Calculate load admittance
Description : To connect coaxial line to a parallel-wire _________ is the best to use. A. directional coupler B. quarter-wave transformer C. balun D. slotted line
Last Answer : C. balun
Description : A lightening arrester connected between the line and earth in a power system (1) protects the terminal equipment against travelling surges (2) protects the transmission line against direct ... suppresses high frequency oscillations in the line (4) reflects back the travelling wave approaching it
Last Answer : A lightening arrester connected between the line and earth in a power system protects the terminal equipment against travelling surges
Description : The short length of the conductor used to connect the line conductor on one side of the terminal pole to the line conductor on the other side of the pole is known as : a)jumper c) guard b) petticoat d) guy
Last Answer : The short length of the conductor used to connect the line conductor on one side of the terminal pole to the line conductor on the other side of the pole is known as : jumper
Description : The input terminal impedance at the center of a folded dipole antenna is A. 72 Ω B. 300 Ω C. 50 Ω D. 73 Ω
Last Answer : B. 300 Ω
Description : Indicate the false statement. Noise figure is defined as A. the ratio of the S/N power supplied at the input terminal of a receiver or amplifier to the S/N power supplied to the output or ... under test, both working at the same temperature over the same bandwidth and fed from the same source
Last Answer : C. an unwanted form of energy tending to interfere with the proper and easy reception and reproduction of wanted signals
Description : What is the input terminal impedance at the center if a folded dipole antenna? A. 300 ohms B. 72 ohms C. 50 ohms D. 450 ohms
Last Answer : A. 300 ohms
Description : A microwave link between the earth station and the down-town terminal. A. STL B. Uplink C. Downlink D. Terrestrial link
Last Answer : D. Terrestrial link
Description : Transmission lines are either balanced or unbalanced with respect to _________. A. negative terminal B. input C. ground D. positive terminal
Last Answer : C. ground
Description : What is the purpose of having input and output capacitors in three terminal IC regulators?
Last Answer : A capacitor connected between the input terminal and ground cancels the inductive effects due to long distribution leads. The output capacitor improves the transient response.
Description : What happens when the common terminal of V+ and V- sources is not grounded?
Last Answer : If the common point of the two supplies is not grounded, twice the supply voltage will get applied and it may damage the op-amp
Description : Portable repeaters for first responders?
Last Answer : Yes they can, here you go ! ! !
Description : How can I create a background beat in Minecraft using redstone repeaters?
Last Answer : There is a fluther minecraft server?
Description : How many types of repeaters ?
Last Answer : There are two types of repeaters . Namely- 1) Amplifier 2) Signal Regenerating
Description : Where are cell antenna repeaters available?
Last Answer : You can obtain cell antenna repeaters at the following: www.Amazon.com, www.ebay.com, www.overstock.com, cellantenna.com/ and cellantenna.com/index.php?id=info.
Description : Wireless Router Repeaters Boost Wi-Fi Signals?
Last Answer : A wireless router repeater, also known as a wireless range extender, is a way to extend the range of a WI-Fi signal. It is used by people who want to make their Wi-Fi signal reach ... . To use a wireless router repeater, place it halfway between the router and the computer receiving the signal.
Description : The diagrams shown in the illustration represent a/an _______________. EL-0093 A. engine order telegraph circuit B. rudder angle indicator arrangement C. engine speed tachometer with repeaters D. sound powered telephone system
Last Answer : Answer: D
Description : In communication satellite, multiple repeaters are known as a. detector b. modulator c. stations d. transponders
Last Answer : transponders
Description : Consider a CSMA/CD network that transmits data at a rate of 100 Mbps (108 bits per second) over a 1 km (kilometre) cable with no repeaters. If the minimum frame size required for this network is 1250 bytes, what is the signal speed (km/sec) in the cable? a. 8000 b. 10000 c. 16000 d. 20000
Last Answer : d. 20000
Description : ………………... are needed to communicate with systems on other networks. A. repeaters B. amplifiers C. Bridge D. Gateways
Last Answer : D. Gateways
Description : . Which fiber-optic system is better? ∙ A. 3 repeaters ∙ B. 8 repeaters ∙ C. 11 repeaters ∙ D. 20 repeaters
Last Answer : A. 3 repeaters
Description : Which fiber-optic system is better? ∙ a. 3 repeaters ∙ b. 8 repeaters ∙ c. 11 repeaters ∙ d. 20 repeaters
Last Answer : a. 3 repeaters
Description : Typically, repeaters are not required for fiber-optic cable lengths up to: a. 1000 miles b. 100 miles c. 100 km d. 10 km
Last Answer : c. 100 km
Description : In the following list of devices, which device is used in datalink layer? (1) Repeaters (2) Routers (3) Application gateway (4) Bridge
Last Answer : Bridge
Description : In the following list of devices which device is used in network layer? (1) Repeaters (2) Router (3) Application Gateway (4) Switch
Last Answer : Router
Description : Regenerative repeaters are placed along the communication path to control: a. Power b. Noise c. Frequency d. Amplitude
Last Answer : Regenerative repeaters are placed along the communication path to control: Noise
Description : What is the full form of 'ISDN' ? -How To ?
Last Answer : The full form of 'ISDN' is Integrated Services Digital Network
Last Answer : ISDN - Integrated Services Digital Network
Description : Which protocols adopted the standards of HDLC (High Level Link Control) protocol? a. X.25 protocol as LAPB (Link Access Procedure Balanced, V.42 protocol as LAPM (Link Access Procedure for ... Services Digital Network) protocol as LAPD (Link Access Procedure on D channel) d. All the above
Last Answer : d. All the above
Description : What do you mean by numbering and addressing? Draw the ISDN address structure and explain how the addressing works?
Last Answer : Numbering and Addressing: In telephone and data networks, the end equipments are more often single units than multiple devices units like PABX or LAN. Historically, a telephone, a computer, or a ... as reference point may also be addressed by using direct inward dialing (DID) feature.
Description : Explain the working of broad band ISDN.
Last Answer : BISDN Configuration: Fig. shows how access to the BISDN network is accomplished. Each peripheral device is interfaced to the access node of a BISDN network through a broadband distant ... consequently, have higher transmission rates and offer more channel handling capacity than ISDN systems.
Description : Broad Band ISDN handles data rate of about (A) 64 kbps (B) 100 mbps (C) 5.4 mbps (D) 2.048 mbps
Last Answer : (A) 64 kbps
Description : ISDN handles data pertaining to (A) All digital services (B) Speech and Video (C) Computer data only (D) Speech only
Last Answer : (A) All digital services
Description : In computing, what does ISDN stand for?
Last Answer : Integrated Services Digital Network
Description : The ISDN channel D designates _____ which contains control information
Last Answer : Data
Description : ISDN stands for
Description : The ISDN channel B designates _____
Last Answer : Bearer