Factor of safety against sliding of a slope, is the ratio of (A) Actual cohesion to that required to maintain stability of slope (B) Shear strength to shear stress along the surface (C) Neither (a) nor (b) (D) Both (a) and (b)

Factor of safety against sliding of a slope, is the ratio of
(A) Actual cohesion to that required to maintain stability of slope
(B) Shear strength to shear stress along the surface
(C) Neither (a) nor (b)
(D) Both (a) and (b)
by

1 Answer

Answer :

Answer: Option D
by

Related questions

Fluid resistance to shear depends upon its (A) Rate of transfer of molecular momentum (B) Cohesion (C) Both (A) and (B) (D) Neither (A) nor (B)

Description : Fluid resistance to shear depends upon its (A) Rate of transfer of molecular momentum (B) Cohesion (C) Both (A) and (B) (D) Neither (A) nor (B)

Last Answer : (C) Both (A) and (B)

The shear strength of a soil (A) Increases with an increase in the normal stress (B) Is proportional to the cohesion of the soil (C) Is generally known as the strength of the soil (D) All the above

Description : The shear strength of a soil (A) Increases with an increase in the normal stress (B) Is proportional to the cohesion of the soil (C) Is generally known as the strength of the soil (D) All the above

Last Answer : (D) All the above

If the cohesive force (c), is 1.5 t/m2 , the density ) of the soil is 2.0 t/m3 , factor of safety (F) is 1.5 and stability factor (Sn) is 0.05, the safe height of a slope, is (A) 5 metres (B) 8 metres (C) 10 metres (D) 12 metres

Description : If the cohesive force (c), is 1.5 t/m2 , the density ) of the soil is 2.0 t/m3 , factor of safety (F) is 1.5 and stability factor (Sn) is 0.05, the safe height of a slope, is (A) 5 metres (B) 8 metres (C) 10 metres (D) 12 metres

Last Answer : (C) 10 metres

Actual stress in the bolts of a flanged coupling of a shaft will be (a) More than the designed strength (b) Less than the designed strength (c) Neither more nor less than the designed strength (d) None

Description : Actual stress in the bolts of a flanged coupling of a shaft will be (a) More than the designed strength (b) Less than the designed strength (c) Neither more nor less than the designed strength (d) None

Last Answer : (b) Less than the designed strength

When a cohesionless soil attains quick condition, it looses (A) Shear strength (B) Bearing capacity (C) Both (a) and (b) (D) Neither (a) nor (6

Description : When a cohesionless soil attains quick condition, it looses (A) Shear strength (B) Bearing capacity (C) Both (a) and (b) (D) Neither (a) nor (6

Last Answer : Answer: Option C

shaft subjected to a bending moment M and a torque T, experiences (A) Maximum bending stress = 32M d 3 (B) Maximum shear stress = 16 T d 3 (C) Both (a) and (b) (D) Neither (a) nor (b)

Description :  shaft subjected to a bending moment M and a torque T, experiences  (A) Maximum bending stress = 32M d 3 (B) Maximum shear stress = 16 T d 3 (C) Both (a) and (b)  (D) Neither (a) nor (b)

Last Answer : (C) Both (a) and (b) 

If"w" is weight of a retaining wall and is the horizontal earth pressure, the factor of safety against sliding, is (A) 1.0 (B) 1.25 (C) 1.5 (D) 2.0

Description : If"w" is weight of a retaining wall and is the horizontal earth pressure, the factor of safety against sliding, is (A) 1.0 (B) 1.25 (C) 1.5 (D) 2.0

Last Answer : Answer: Option C

In case the factor of safety against sliding is less than 1.5, a portion of slab is constructed downwards at the end of the heel slab, which is known as (A) A key (B) A cut-off wall (C) A rib (D) All the above

Description : In case the factor of safety against sliding is less than 1.5, a portion of slab is constructed downwards at the end of the heel slab, which is known as (A) A key (B) A cut-off wall (C) A rib (D) All the above

Last Answer : Answer: Option D

Which of the following is not depends on shear strength of the material? (A) Cohesion (B) Internal friction (C) Normal stress (D) Mass of the material

Description : Which of the following is not depends on shear strength of the material? (A) Cohesion (B) Internal friction (C) Normal stress (D) Mass of the material

Last Answer : (D) Mass of the material 

The shear strength in plastic undrained clay, is due to (A) Inter-granular friction (B) Internal friction (C) Cohesion (D) None of these

Description : The shear strength in plastic undrained clay, is due to (A) Inter-granular friction (B) Internal friction (C) Cohesion (D) None of these

Last Answer : (C) Cohesion

Consider the following statements: For pure clay, the shear strength parameters will be 1. Cohesion c = 0; and angle of internal friction  will be maximum. 2. Cohesion c is maximum; and angle of internal friction  is also maximum. 3. Angle of internal friction  is zero, with some value of cohesion c. Which of these statements is/are correct? (a) 1, 2 & 3 (b) 1 only (c) 3 only (d) 2 only

Description : Consider the following statements: For pure clay, the shear strength parameters will be 1. Cohesion c = 0; and angle of internal friction  will be maximum. 2. Cohesion c is maximum; and angle of internal friction  is also maximum. ... is/are correct? (a) 1, 2 & 3 (b) 1 only (c) 3 only (d) 2 only

Last Answer : (c) 3 only

A beam is said to be of uniform strength, if (A) B.M. is same throughout the beam (B) Shear stress is same throughout the beam (C) Deflection is same throughout the beam (D) Bending stress is same at every section along its longitudinal axis

Description : A beam is said to be of uniform strength, if (A) B.M. is same throughout the beam (B) Shear stress is same throughout the beam (C) Deflection is same throughout the beam (D) Bending stress is same at every section along its longitudinal axis

Last Answer : (D) Bending stress is same at every section along its longitudinal axis

The rate of shear versus the shear stress curves are time dependent for __________ fluid. (A) Thixotropic (B) Rheopectic (C) Both (A) & (B) (D) Neither (A) nor (B)

Description : The rate of shear versus the shear stress curves are time dependent for __________ fluid. (A) Thixotropic (B) Rheopectic (C) Both (A) & (B) (D) Neither (A) nor (B)

Last Answer : (C) Both (A) & (B)

Rise of liquid in a capillary tube is due to (A) Cohesion (B) Adhesion (C) Both (A) & (B) (D) Neither (A) nor (B)

Description : Rise of liquid in a capillary tube is due to (A) Cohesion (B) Adhesion (C) Both (A) & (B) (D) Neither (A) nor (B)

Last Answer : (C) Both (A) & (B

The property of fluid by virtue of which it offers resistance to shear is called (A) Surface tension (B) Adhesion (C) Cohesion (D) Viscosity

Description : The property of fluid by virtue of which it offers resistance to shear is called (A) Surface tension (B) Adhesion (C) Cohesion (D) Viscosity

Last Answer : Answer: Option D

The slope correction may be ignored if (A) The slope of the ground is less than 3° (B) To slope of the ground is say 1 in 19 (C) Both (a) and (b) (D) Neither (a) nor (b)

Description : The slope correction may be ignored if  (A) The slope of the ground is less than 3°  (B) To slope of the ground is say 1 in 19  (C) Both (a) and (b)  (D) Neither (a) nor (b) 

Last Answer : (C) Both (a) and (b

Shear stress is maximum at the (a) Outermost fiber (b) Central fiber (c) Neither outermost nor central fiber (d) None

Description : Shear stress is maximum at the (a) Outermost fiber (b) Central fiber (c) Neither outermost nor central fiber (d) None

Last Answer : (b) Central fiber

Shear stress is zero at the (a) Outermost fiber (b) Central fiber (c) Neither outermost nor central fiber (d) None

Description : Shear stress is zero at the (a) Outermost fiber (b) Central fiber (c) Neither outermost nor central fiber (d) None

Last Answer : (a) Outermost fiber

Shear stress in the beam acting on the cross section is (a) Normal to the cross section (b) Tangential to the cross section (c) Neither normal nor tangential (d) None

Description : Shear stress in the beam acting on the cross section is (a) Normal to the cross section (b) Tangential to the cross section (c) Neither normal nor tangential (d) None

Last Answer : b) Tangential to the cross section

Factor of safety for fatigue loading is the ratio of (a) elastic limit to the working stress (b) Young's modulus to the ultimate tensile strength (c) endurance limit to the working stress (d) elastic limit to the yield point

Description : Factor of safety for fatigue loading is the ratio of (a) elastic limit to the working stress (b) Young's modulus to the ultimate tensile strength (c) endurance limit to the working stress (d) elastic limit to the yield point

Last Answer : (c) endurance limit to the working stress

Critical shear stress of cohesive sediment (a) Decreases with the void ratio for a given plasticity index (b) Increases with the plasticity index for a given void ratio (c) Increases with shear strength for a given clay content (d) All of the above.

Description : Critical shear stress of cohesive sediment (a) Decreases with the void ratio for a given plasticity index (b) Increases with the plasticity index for a given void ratio (c) Increases with shear strength for a given clay content (d) All of the above.

Last Answer : (c) Increases with shear strength for a given clay content

Pick up the correct statement from the following: (A) The rate of change of bending moment is equal to rate of shear force (B) The rate of change of shear force is equal to rate of loading (C) Neither (a) nor (b)(D) Both (a) and (b

Description : Pick up the correct statement from the following: (A) The rate of change of bending moment is equal to rate of shear force (B) The rate of change of shear force is equal to rate of loading (C) Neither (a) nor (b) (D) Both (a) and (b

Last Answer : (D) Both (a) and (b

In turbulent flow, the (A) Fluid particles move in an orderly manner (B) Momentum transfer is on molecular scale only (C) Shear stress is caused more effectively by cohesion than momentum transfer (D) Shear stresses are generally larger than in a similar laminar flow

Description : In turbulent flow, the (A) Fluid particles move in an orderly manner (B) Momentum transfer is on molecular scale only (C) Shear stress is caused more effectively by cohesion than momentum transfer (D) Shear stresses are generally larger than in a similar laminar flow

Last Answer : (D) Shear stresses are generally larger than in a similar laminar flow

Failure of a slope occurs only when total shear force is A) Equal to total shearing strength (B) Greater than total shearing strength (C) Less than total shearing strength (D) None of these

Description : Failure of a slope occurs only when total shear force is A) Equal to total shearing strength (B) Greater than total shearing strength (C) Less than total shearing strength (D) None of these

Last Answer : Answer: Option B

The property of a fluid which enables it to resist tensile stress is known as (A) Compressibility (B) Surface tension (C) Cohesion (D) Adhesion

Description : The property of a fluid which enables it to resist tensile stress is known as (A) Compressibility (B) Surface tension (C) Cohesion (D) Adhesion

Last Answer : Answer: Option C

Factor of safety is a. Tensile stress / Permissible stress b. Compressive stress / Ultimate stress c. Ultimate stress / Permissible stress d. Ultimate stress / Shear stress

Description : Factor of safety is a. Tensile stress / Permissible stress b. Compressive stress / Ultimate stress c. Ultimate stress / Permissible stress d. Ultimate stress / Shear stress

Last Answer : c. Ultimate stress / Permissible stress

The stability of a dam is checked for (A) Tension at the base (B) Overturning of the wall or dam (C) Sliding of the wall or dam (D) All of these

Description : The stability of a dam is checked for (A) Tension at the base (B) Overturning of the wall or dam (C) Sliding of the wall or dam (D) All of these

Last Answer : Answer: Option D

Increase in water content in a cement concrete (i) Increases workability (ii) Increases the strength [ A ] i [ B ] ii [ C ] both (i) and (ii) [ D ] neither (i) nor (ii)

Description : Increase in water content in a cement concrete (i) Increases workability (ii) Increases the strength [ A ] i [ B ] ii [ C ] both (i) and (ii) [ D ] neither (i) nor (ii)

Last Answer : [ A ] i

In a R.C section under flexure, the assumption that “a plane section before bending remains plane after bending” leads to (a) Strain distribution being linear across the depth (b) Stress distribution being linear across the depth (c) Both stress and strain distribution being linear across the depth (d) Shear stress distribution being uniform along the depth

Description : In a R.C section under flexure, the assumption that a plane section before bending remains plane after bending leads to (a) Strain distribution being linear across the depth (b) ... strain distribution being linear across the depth (d) Shear stress distribution being uniform along the depth

Last Answer : (a) Strain distribution being linear across the depth

Shear strength of a soil is a unique function of (A) Effective stress only (B) Total stress only (C) Both effective stress and total stress (D) None of the above

Description : Shear strength of a soil is a unique function of (A) Effective stress only (B) Total stress only (C) Both effective stress and total stress (D) None of the above

Last Answer : Answer: Option A

In a packed absorption tower, if the equilibrium and operating lines are both straight lines, then the ratio, HETP/HTUOG __________ the absorption factor. (A) Increases with increase in (B) Is one at unity value of (C) Both (A) and (B) (D) Neither (A) nor (B)

Description : In a packed absorption tower, if the equilibrium and operating lines are both straight lines, then the ratio, HETP/HTUOG __________ the absorption factor. (A) Increases with increase in (B) Is one at unity value of (C) Both (A) and (B) (D) Neither (A) nor (B)

Last Answer : (C) Both (A) and (B)

The shear resistance of a soil is constituted basically of the following component. (A) The frictional resistance to translocation between the individual soil particles at their contact point (B) To the structural relation to displacement of the soil because of the interlocking of the particles (C) Cohesion and adhesion between the surfaces of the soil particles (D) All the above

Description : The shear resistance of a soil is constituted basically of the following component. (A) The frictional resistance to translocation between the individual soil particles at their contact point (B) To the ... (C) Cohesion and adhesion between the surfaces of the soil particles (D) All the above

Last Answer : Answer: Option D

Horsepower required for a roll crusher is directly proportional to its (A) Reduction ratio (B) Capacity(C) Both (A) & (B)(D) Neither (A) nor (B)

Description : Horsepower required for a roll crusher is directly proportional to its (A) Reduction ratio (B) Capacity (C) Both (A) & (B) (D) Neither (A) nor (B)

Last Answer : (C) Both (A) & (B)

Toothed roll crushers achieve size reduction by (A) Tearing (shear) and compression (B) Impact and attrition (C) Both (A) & (B) (D) Neither (A) nor (B)

Description : Toothed roll crushers achieve size reduction by (A) Tearing (shear) and compression (B) Impact and attrition (C) Both (A) & (B) (D) Neither (A) nor (B)

Last Answer : (C) Both (A) & (B)

Aerodynamic noise resulting from turbulent gas flow is the most prevalent source of valve noise in fluid flow control. It is caused due to (A) Reynold stresses (B) Shear forces (C) Both (A) & (B) (D) Neither (A) nor (B)

Description : Aerodynamic noise resulting from turbulent gas flow is the most prevalent source of valve noise in fluid flow control. It is caused due to (A) Reynold stresses (B) Shear forces (C) Both (A) & (B) (D) Neither (A) nor (B)

Last Answer : (C) Both (A) & (B)

Actual flame temperature is always lower than the adiabatic flame temperature, because there is (A) No possibility of obtaining complete combustion at high temperature (B) Always loss of heat from the flame (C) Both (A) and (B) (D) Neither (A) nor (B)

Description : Actual flame temperature is always lower than the adiabatic flame temperature, because there is (A) No possibility of obtaining complete combustion at high temperature (B) Always loss of heat from the flame (C) Both (A) and (B) (D) Neither (A) nor (B)

Last Answer : (C) Both (A) and (B)

Failure of the stability of slopes, generally occurs along (A) Slip plane (B) A horizontal surface (C) A curved surface (D) All the surfaces

Description : Failure of the stability of slopes, generally occurs along (A) Slip plane (B) A horizontal surface (C) A curved surface (D) All the surfaces

Last Answer : Answer: Option C

Along the principal plan subjected to maximum principal stress (A) Maximum shear stress acts (B) Minimum shear stress acts(C) No shear stress acts (D) None of these

Description : Along the principal plan subjected to maximum principal stress (A) Maximum shear stress acts (B) Minimum shear stress acts (C) No shear stress acts (D) None of these

Last Answer : (C) No shear stress acts

Pick up the correct statement from the following: (A) An unconfined compression test is a special case of triaxial compression test (B) An unconfined compression test is a special case of direct shear test (C) The confining pressure is maximum during an unconfined compression test (D) The cylindrical specimen of a soil is subjected to major principal stress till it fails due to shearing along the plane of the failure

Description : Pick up the correct statement from the following: (A) An unconfined compression test is a special case of triaxial compression test (B) An unconfined compression test is a special case of direct ... subjected to major principal stress till it fails due to shearing along the plane of the failure

Last Answer : Option A

A centrifugal pump is required to be primed before starting if it is located (A) At higher level than water level of reservoir (B) At lower level than water level of reservoir (C) Both (a) and (b) (D) Neither (a) nor (b)

Description : A centrifugal pump is required to be primed before starting if it is located  (A) At higher level than water level of reservoir  (B) At lower level than water level of reservoir  (C) Both (a) and (b)  (D) Neither (a) nor (b) 

Last Answer : (A) At higher level than water level of reservoir

A beam is said to be of uniform strength, if (A) B.M. is same throughout the beam (B) Deflection is same throughout the beam (C) Bending stress is same throughout the beam (D) Shear stress is same throughout the beam

Description : A beam is said to be of uniform strength, if (A) B.M. is same throughout the beam (B) Deflection is same throughout the beam (C) Bending stress is same throughout the beam (D) Shear stress is same throughout the beam

Last Answer : (C) Bending stress is same throughout the beam

For shear strength, triaxial shear test is suitable because (A) It can be performed under all three drainage conditions (B) Precise measurement of the pore pressure and volume change during the test is possible (C) Stress distribution on the failure plane, is uniform (D) All the above

Description : For shear strength, triaxial shear test is suitable because (A) It can be performed under all three drainage conditions (B) Precise measurement of the pore pressure and volume change during the test is possible (C) Stress distribution on the failure plane, is uniform (D) All the above

Last Answer : (D) All the above

The Mohr's straight theory is based on the following fact: (A) Material fails essentially by shear (B) Ultimate strength of the material is determined by the stress in the plane of slip (C) Failure criterion is independent of the intermediate principal stress (D) All the above

Description : The Mohr's straight theory is based on the following fact: (A) Material fails essentially by shear (B) Ultimate strength of the material is determined by the stress in the plane of slip (C) Failure criterion is independent of the intermediate principal stress (D) All the above

Last Answer : Answer: Option D

Which one of the following statements is true for Mohr-Coulomb envelope? (A) Coulomb suggests that the relationship between shear strength and normal stress, is adequately represented by the straight line (B) The generalised Mohr theory suggests that, though the shear stress depends on the normal stress, the relation is not linear (C) Coulomb and Mohr suggest that a definite relationship exists among the principal stress and the angle of internal friction (D) All the above

Description : Which one of the following statements is true for Mohr-Coulomb envelope? (A) Coulomb suggests that the relationship between shear strength and normal stress, is adequately represented by the straight line ... exists among the principal stress and the angle of internal friction (D) All the above

Last Answer : Answer: Option D

The shear strength of a soil (A) Is directly proportional to the angle of internal friction of the soil (B) Is inversely proportional to the angle of internal friction of the soil (C) Decreases with increase in normal stress (D) Decreases with decrease in normal stress

Description : The shear strength of a soil (A) Is directly proportional to the angle of internal friction of the soil (B) Is inversely proportional to the angle of internal friction of the soil (C) Decreases with increase in normal stress (D) Decreases with decrease in normal stress

Last Answer : Answer: Option D

When shear stress exceeds the permissible limit in a slab, then it is reduced by (A) Increasing the depth (B) Providing shear reinforcement (C) Using high strength steel (D) Using thinner bars but more in number

Description : When shear stress exceeds the permissible limit in a slab, then it is reduced by (A) Increasing the depth (B) Providing shear reinforcement (C) Using high strength steel (D) Using thinner bars but more in number

Last Answer : Answer: Option A

The variation of atmospheric potential is caused due to: (A) Difference in temperature over the surface of the earth (B) Change in the density of air (C) Both (a) and (b) (D) Neither (a) nor (b)

Description : The variation of atmospheric potential is caused due to: (A) Difference in temperature over the surface of the earth (B) Change in the density of air (C) Both (a) and (b) (D) Neither (a) nor (b)

Last Answer : (C) Both (a) and (b)

Pick up the correct statement from the following: (A) The free water is the amount of water added while mixing and the amount of water held on the surface of the aggregates prior to mixing (B) The total water is the free water and the amount actually absorbed by the aggregates (C) Neither (a) nor (b) (D) Both (a) and (b)

Description : Pick up the correct statement from the following: (A) The free water is the amount of water added while mixing and the amount of water held on the surface of the aggregates prior to mixing (B) The total water ... actually absorbed by the aggregates (C) Neither (a) nor (b) (D) Both (a) and (b)

Last Answer : Answer: Option D

A four wheel truck or whose operating weight is 12000 kg is pulled along a road having a rising slope of 2% at a uniform speed. Assume grade resistance factor = 10 kg/tonne. The tension in the tow cable is 720 kg. The rolling resistance of the road will be (A) 20 kg/tonne (B) 30 kg/tonne (C) 40 kg/tonne (D) 50 kg/tonne

Description : A four wheel truck or whose operating weight is 12000 kg is pulled along a road having a rising slope of 2% at a uniform speed. Assume grade resistance factor = 10 kg/tonne. The tension in the tow cable is 720 kg. The ... will be (A) 20 kg/tonne (B) 30 kg/tonne (C) 40 kg/tonne (D) 50 kg/tonne

Last Answer : (C) 40 kg/tonne

The ratio of shear stress and shear strain of an elastic material, is (A) Modulus of Rigidity (B) Shear Modulus (C) Modulus of Elasticity (D) Both (a) and (b)

Description : The ratio of shear stress and shear strain of an elastic material, is  (A) Modulus of Rigidity  (B) Shear Modulus  (C) Modulus of Elasticity  (D) Both (a) and (b) 

Last Answer : (D) Both (a) and (b)