The 'transition temperature' for ductile to brittle behaviour of steel increases with increase in the __________ content in steel. (A) Carbon (B) Manganese (C) Both 'a' nor 'b' (D) Neither 'a' nor 'b'

The 'transition temperature' for ductile to brittle behaviour of steel increases with increase in the __________ content in steel. (A) Carbon
(B) Manganese
(C) Both 'a' nor 'b'
(D) Neither 'a' nor 'b'
by

1 Answer

Answer :

(A) Carbon
by

Related questions

What Is Ductile-brittle Transition Temperature?

Description : What Is Ductile-brittle Transition Temperature?

Last Answer : It is the temperature below which the tendency of a material to fracture increases rather than forming. Below this temperature the material loses its ductility. It is also called Nil Ductility Temperature

Steel produced from phosphatic iron is __________ in nature. (A) Malleable (B) Ductile (C) Brittle (D) Tough

Description : Steel produced from phosphatic iron is __________ in nature. (A) Malleable (B) Ductile (C) Brittle (D) Tough

Last Answer : (C) Brittle

List at least two factors that promote transition from ductile to brittle fracture.

Description : List at least two factors that promote transition from ductile to brittle fracture.

Last Answer : Manner of loading, and the rate of loading promote transition from ductile to brittle frac¬ture. A machine member may have ductile failure under static loading but may fail in brittle fashion when the ... testing speed but if load is applied at a high velocity then failure may be brittle.

List At Least Two Factors That Promote The Transition From Ductile To Brittle Fracture?

Description : List At Least Two Factors That Promote The Transition From Ductile To Brittle Fracture?

Last Answer : The manner of loading and the rate of loading promote the transition from ductile to brittle fracture. A machine member may have ductile failure under static loading but may fail in brittle fashion when the ... testing speed, but if the load is applied at a high velocity then failure may be brittle.

Manganese is added in low carbon steel to A. Make the steel tougher and harder B. Raise the yield point C. Make the steel ductile and of good bending qualities D. All of the above

Description : Manganese is added in low carbon steel to A. Make the steel tougher and harder B. Raise the yield point C. Make the steel ductile and of good bending qualities D. All of the above

Last Answer : C. Make the steel ductile and of good bending qualities

Polystyrene is a __________ plastic at room temperature. (A) Ductile (B) Brittle (C) Malleable (D) None of these

Description : Polystyrene is a __________ plastic at room temperature. (A) Ductile (B) Brittle (C) Malleable (D) None of these

Last Answer : (B) Brittle

Zinc is highly __________ at room temperature. (A) Ductile (B) Resistant to atmospheric corrosion (C) Malleable (D) Brittle

Description : Zinc is highly __________ at room temperature. (A) Ductile (B) Resistant to atmospheric corrosion (C) Malleable (D) Brittle

Last Answer : (B) Resistant to atmospheric corrosion

'Shock-absorbers are usually made of steel as it – (1) is not brittle (2) has lower elasticity (3) has higher elasticity (4) has no ductile property

Description : 'Shock-absorbers are usually made of steel as it – (1) is not brittle (2) has lower elasticity (3) has higher elasticity (4) has no ductile property

Last Answer : (3) has higher elasticity Explanation: A shock absorber is a mechanical device designed to smooth out or damp shock impulse, and dissipate kinetic energy. Steel is an alloy made by combining iron and other elements, the most common of these being carbon.

'Shock-absorbers' are usually made of steel as it : (1) is not brittle (2) has lower elasticity (3) has higher elasticity (4) has no ductile property

Description : 'Shock-absorbers' are usually made of steel as it : (1) is not brittle (2) has lower elasticity (3) has higher elasticity (4) has no ductile property

Last Answer : has higher elasticity

Cast iron is a __________ material. (A) Brittle (B) Ductile (C) Tough (D) Malleable

Description : Cast iron is a __________ material. (A) Brittle (B) Ductile (C) Tough (D) Malleable

Last Answer : (A) Brittle

__________ test is the appropriate test to determine whether a material is ductile or brittle. (A) Impact (B) Cupping (C) Hardness (D) Tensile

Description : __________ test is the appropriate test to determine whether a material is ductile or brittle. (A) Impact (B) Cupping (C) Hardness (D) Tensile

Last Answer : (A) Impact

Increase in water content in a cement concrete (i) Increases workability (ii) Increases the strength [ A ] i [ B ] ii [ C ] both (i) and (ii) [ D ] neither (i) nor (ii)

Description : Increase in water content in a cement concrete (i) Increases workability (ii) Increases the strength [ A ] i [ B ] ii [ C ] both (i) and (ii) [ D ] neither (i) nor (ii)

Last Answer : [ A ] i

With increase in the oxygen content of the coal, its __________ decreases. (A) Calorific value (B) Caking power (C) Both (A) & (B) (D) Neither (A) nor (B)

Description : With increase in the oxygen content of the coal, its __________ decreases. (A) Calorific value (B) Caking power (C) Both (A) & (B) (D) Neither (A) nor (B)

Last Answer : (C) Both (A) & (B)

In a packed absorption tower, if the equilibrium and operating lines are both straight lines, then the ratio, HETP/HTUOG __________ the absorption factor. (A) Increases with increase in (B) Is one at unity value of (C) Both (A) and (B) (D) Neither (A) nor (B)

Description : In a packed absorption tower, if the equilibrium and operating lines are both straight lines, then the ratio, HETP/HTUOG __________ the absorption factor. (A) Increases with increase in (B) Is one at unity value of (C) Both (A) and (B) (D) Neither (A) nor (B)

Last Answer : (C) Both (A) and (B)

__________ increases with increase in pressure. (A) The melting point of wax (B) The boiling point of a liquid (C) Both (A) and (B) (D) Neither (A) nor (B)

Description : __________ increases with increase in pressure. (A) The melting point of wax (B) The boiling point of a liquid (C) Both (A) and (B) (D) Neither (A) nor (B)

Last Answer : (C) Both (A) and (B)

Increasing the carbon content of steel (A) Reduces the upper shelf energy (B) Increasing the ductility transition temperature (C) Decreases brittleness (D) Decreases hardness

Description : Increasing the carbon content of steel (A) Reduces the upper shelf energy (B) Increasing the ductility transition temperature (C) Decreases brittleness (D) Decreases hardness

Last Answer : (B) Increasing the ductility transition temperature

Visco-elastic behaviour exhibited by plastics is a __________ like behaviour. (A) Solid (B) Liquid (C) Combination of solid & liquid (D) Neither solid nor liquid

Description : Visco-elastic behaviour exhibited by plastics is a __________ like behaviour. (A) Solid (B) Liquid (C) Combination of solid & liquid (D) Neither solid nor liquid

Last Answer : (C) Combination of solid & liquid

Gaseous diffusion co-efficient increases with increase in the (A) Pressure (B) Temperature (C) Both (A) & (B) (D) Neither (A) nor (B)

Description : Gaseous diffusion co-efficient increases with increase in the (A) Pressure (B) Temperature (C) Both (A) & (B) (D) Neither (A) nor (B)

Last Answer : (B) Temperature

With increase in temperature, the leaching rate increases because of the (A) Increased diffusivity (B) Decreased viscosity of liquid (C) Both (A) and (B) (D) Neither (A) nor (B)

Description : With increase in temperature, the leaching rate increases because of the (A) Increased diffusivity (B) Decreased viscosity of liquid (C) Both (A) and (B) (D) Neither (A) nor (B)

Last Answer : (C) Both (A) and (B)

With increase in temperature, the leaching rate increases due to (A) Decreased liquid viscosity (B) Increased diffusivity (C) Both (A) and (B) (D) Neither (A) nor (B)

Description : With increase in temperature, the leaching rate increases due to (A) Decreased liquid viscosity (B) Increased diffusivity (C) Both (A) and (B) (D) Neither (A) nor (B)

Last Answer : (C) Both (A) and (B)

The main factor on which the behaviour of a mass of fluidised solid depends mainly is the (A) Fluid characteristics (B) Particle size (C) Both (A) and (B) (D) Neither (A) nor (B)

Description : The main factor on which the behaviour of a mass of fluidised solid depends mainly is the (A) Fluid characteristics (B) Particle size (C) Both (A) and (B) (D) Neither (A) nor (B)

Last Answer : (C) Both (A) and (B)

With increase in temperature, the equilibrium __________ rises in case of endothermic reaction. (A) Constant (B) Conversion (C) Both (A) & (B) (D) Neither (A) nor (B)

Description : With increase in temperature, the equilibrium __________ rises in case of endothermic reaction. (A) Constant (B) Conversion (C) Both (A) & (B) (D) Neither (A) nor (B)

Last Answer : (B) Conversion

Carbon is present in steel wholly in the (A) Combined form (B) Free state as graphite (C) Both (A) and (B) (D) Neither (A) nor (B)

Description : Carbon is present in steel wholly in the (A) Combined form (B) Free state as graphite (C) Both (A) and (B) (D) Neither (A) nor (B)

Last Answer : (A) Combined form

A material capable of undergoing large permanent deformation, when subjected to compression is termed as (A) Malleable (B) Ductile (C) Brittle (D) None of these

Description : A material capable of undergoing large permanent deformation, when subjected to compression is termed as (A) Malleable (B) Ductile (C) Brittle (D) None of these

Last Answer : (A) Malleable

. A material capable of undergoing large permanent deformation, when subjected to tension is termed as (A) Friable (B) Ductile (C) Brittle (D) None of these

Description : . A material capable of undergoing large permanent deformation, when subjected to tension is termed as (A) Friable (B) Ductile (C) Brittle (D) None of these

Last Answer : (B) Ductile

A dense structure of grinding wheel is not used for the (A) Ductile material (B) Hard materials (C) Brittle materials (D) Finishing cuts

Description : A dense structure of grinding wheel is not used for the (A) Ductile material (B) Hard materials (C) Brittle materials (D) Finishing cuts

Last Answer : A) Ductile material

The materials which fracture even at small strains are termed as brittle, while those materials which exhibit an appreciable deformation before failure are termed as (A) Rigid (B) Tough (C) Ductile (D) Plastic

Description : The materials which fracture even at small strains are termed as brittle, while those materials which exhibit an appreciable deformation before failure are termed as (A) Rigid (B) Tough (C) Ductile (D) Plastic

Last Answer : Option C

Consider the following statements: 1. Balaghat is known for its diamond mines. 2. Majhgawan is known for its manganese deposits. Which of the statements given above is/are correct? [IAS 2007] (a) 1 only (b) 2 only (c) Both 1 and 2 (d) Neither 1 nor 2

Description : Consider the following statements: 1. Balaghat is known for its diamond mines. 2. Majhgawan is known for its manganese deposits. Which of the statements given above is/are correct? [IAS 2007] (a) 1 only (b) 2 only (c) Both 1 and 2 (d) Neither 1 nor 2

Last Answer : Ans: (d)

With increase in carbide/graphite ratio in cast iron, its (A) Hardness & brittleness increases (B) Ductility decreases (C) Both (A) and (B) (D) Neither (A) nor (B)

Description : With increase in carbide/graphite ratio in cast iron, its (A) Hardness & brittleness increases (B) Ductility decreases (C) Both (A) and (B) (D) Neither (A) nor (B)

Last Answer : (C) Both (A) and (B)

Bomb calorimeter can be used to determine the __________ of the coal. (A) Sulphur content (B) Calorific value (C) Both (A) & (B) (D) Neither (A) nor (B)

Description : Bomb calorimeter can be used to determine the __________ of the coal. (A) Sulphur content (B) Calorific value (C) Both (A) & (B) (D) Neither (A) nor (B)

Last Answer : (C) Both (A) & (B)

The cake resistance increases steadily with the time of filtration in a plate and frame filter employing constant __________ filtration. (A) Rate(B) Pressure(C) Both (A) & (B)(D) Neither (A) nor (B

Description : The cake resistance increases steadily with the time of filtration in a plate and frame filter employing constant __________ filtration. (A) Rate (B) Pressure (C) Both (A) & (B) (D) Neither (A) nor (B

Last Answer : (C) Both (A) & (B)

Coke oven gas produced by high temperature carbonisation of coal (as compared to that produced by low temperature carbonisation), has (A) Higher calorific value (B) Lower hydrogen content (C) Both (A) and (B) (D) Neither (A) nor (B)

Description : Coke oven gas produced by high temperature carbonisation of coal (as compared to that produced by low temperature carbonisation), has (A) Higher calorific value (B) Lower hydrogen content (C) Both (A) and (B) (D) Neither (A) nor (B)

Last Answer : (D) Neither (A) nor (B)

Which theories of failure are used for (a) ductile materials, and (B) brittle materials ?

Description : Which theories of failure are used for (a) ductile materials, and (B) brittle materials ?

Last Answer : For ductile materials, theories of failure used are maximum shear stress theory, and maximum energy of distortion theory; while for brittle materials, theory of maximum principal stress, and maximum strain are used.

Substances that elongate considerably and undergo plastic deformation before they break are known as A. brittle substances B. breakable substances C. ductile substances D. elastic substances

Description : Substances that elongate considerably and undergo plastic deformation before they break are known as A. brittle substances B. breakable substances C. ductile substances D. elastic substances

Last Answer : ductile substances

In which of the following case stress concentration factor is ignored? a) Ductile material under static load b) Ductile material under fluctuating load c) Brittle material under static load

Description : In which of the following case stress concentration factor is ignored? a) Ductile material under static load b) Ductile material under fluctuating load c) Brittle material under static load

Last Answer : a) Ductile material under static load

Maximum total strain energy theory is applicable to (a) Ductile materials (b) Brittle materials (c) Composite materials (d) None

Description : Maximum total strain energy theory is applicable to (a) Ductile materials (b) Brittle materials (c) Composite materials (d) None

Last Answer : (a) Ductile materials

Maximum total strain energy theory is applicable to (a) Ductile materials (b) Brittle materials (c) Composite materials (d) None

Description : Maximum total strain energy theory is applicable to (a) Ductile materials (b) Brittle materials (c) Composite materials (d) None

Last Answer : (b) Brittle materials

Maximum principal strain theory is applicable to (a) Ductile materials (b) Brittle materials (c) Composite materials (d) None

Description : Maximum principal strain theory is applicable to (a) Ductile materials (b) Brittle materials (c) Composite materials (d) None

Last Answer : (b) Brittle materials

Maximum shear stress theory is applicable to (a) Ductile materials (b) Brittle materials (c) Composite materials

Description : Maximum shear stress theory is applicable to (a) Ductile materials (b) Brittle materials (c) Composite materials

Last Answer : (a) Ductile materials

Maximum principal stress theory is applicable to (a) Ductile materials (b) Brittle materials (c) Composite materials (d) None

Description : Maximum principal stress theory is applicable to (a) Ductile materials (b) Brittle materials (c) Composite materials (d) None

Last Answer : (b) Brittle materials

Pick up the correct statement from the following: (A) A ductile material has large plastic zone (B) A brittle material has no plastic zone (C) A rigid material has no plastic zone (D) All the above

Description : Pick up the correct statement from the following: (A) A ductile material has large plastic zone (B) A brittle material has no plastic zone (C) A rigid material has no plastic zone (D) All the above

Last Answer : All the above

Which Theories Of Failure Are Used For? (a) Ductile Materials (b) Brittle Materials?

Description : Which Theories Of Failure Are Used For? (a) Ductile Materials (b) Brittle Materials?

Last Answer : For ductile materials, theories of failure used are maximum shear stress theory and maximum energy of distortion theory; For brittle materials, the theory of maximum principal stress and maximum strain are used.

Distinguish Between Brittle Fracture And Ductile Fracture?

Description : Distinguish Between Brittle Fracture And Ductile Fracture?

Last Answer : In brittle fracture, crack growth is up to a small depth of the material. In ductile fracture large amount of plastic deformation is present to a higher depth.

The material in which large deformation is possible before absolute failure by rupture takes place, is known as (a) Ductile (b) Plastic (c) Brittle (d) Elastic

Description : The material in which large deformation is possible before absolute failure by rupture takes place, is known as (a) Ductile (b) Plastic (c) Brittle (d) Elastic

Last Answer : Ductile

Charpy impact tests showing a rough torn surface after the completed test, this would indicate which type of failure? a) Fatigue b) Ductile c) Fatigue to ductile d) Brittle

Description : Charpy impact tests showing a rough torn surface after the completed test, this would indicate which type of failure? a) Fatigue b) Ductile c) Fatigue to ductile d) Brittle

Last Answer : b) Ductile

The substance which undergo plastic deformation until break is a) Brittle b) Ductile c) Hard d) Soft

Description : The substance which undergo plastic deformation until break is a) Brittle b) Ductile c) Hard d) Soft

Last Answer : d) Soft

The substance which break just after elastic limit: a) Ductile b) Brittle c) Soft d) Hard

Description : The substance which break just after elastic limit: a) Ductile b) Brittle c) Soft d) Hard

Last Answer : d) Hard

Which stress strain curve is more steep (a) For a ductile material (b) For a brittle material (c) For a pure metal (d) None

Description : Which stress strain curve is more steep (a) For a ductile material (b) For a brittle material (c) For a pure metal (d) None

Last Answer : b) For a brittle material

Define factor of safety for ductile and brittle material.

Description : Define factor of safety for ductile and brittle material.

Last Answer : Factor of safety for ductile material: It is defined as ratio of yield stress to the working stress or  Factor of safety for Brittle material : It is defined as ratio of ultimate stress to the working stress /permissible /design stress or

__________ is added in low carbon steel to raise its yield point. (A) Sulphur (B) Phosphorous (C) Silicon (D) Manganese

Description : __________ is added in low carbon steel to raise its yield point. (A) Sulphur (B) Phosphorous (C) Silicon (D) Manganese

Last Answer : (D) Manganese