The tensile strength of concrete is given by [ A ] 0.45 vfCK [ B ] 0.60 vfCK [ C ] 0.70 vfCK [ D ] 0.90 vfCK

The tensile strength of concrete is given by
[ A ] 0.45 vfCK
[ B ] 0.60 vfCK
[ C ] 0.70 vfCK
[ D ] 0.90 vfCK
by

1 Answer

Answer :

[ C ] 0.70 vfCK
by

Related questions

High strength of concrete requires a water cement ratio of [ A ] 0.10 to 0.15 [ B ] 0.25 to 0.30 [ C ] 0.45 to 0.60 [ D ] 0.75 to 0.90

Description : High strength of concrete requires a water cement ratio of [ A ] 0.10 to 0.15 [ B ] 0.25 to 0.30 [ C ] 0.45 to 0.60 [ D ] 0.75 to 0.90

Last Answer : [ B ] 0.25 to 0.30

As per IS: 456-2000, modulus of elasticity of concrete (in N/mm2) is given by [ A ] 5700 vfCK [ B ] 5000 vfCK [ C ] 3700 vfCK [ D ] 3000 vfCK

Description : As per IS: 456-2000, modulus of elasticity of concrete (in N/mm2) is given by [ A ] 5700 vfCK [ B ] 5000 vfCK [ C ] 3700 vfCK [ D ] 3000 vfCK

Last Answer : [ B ] 5000 vfCK

At 28 days of curing concrete attains a strength of [ A ] 20 to 25% [ B ] 60 to 70% [ C ] 65 to 80% [ D ] 90 to 95%

Description : At 28 days of curing concrete attains a strength of [ A ] 20 to 25% [ B ] 60 to 70% [ C ] 65 to 80% [ D ] 90 to 95%

Last Answer : [ D ] 90 to 95%

In India, which one of the following should be considered the right combination of the age in days and live body weight in kg for a lamb for its weaning ? (A) 20 days to 30 days and 6 kg to 7 kg (B) 45 days to 60 days and 8 kg to 10 kg (C) 105 days to 120 days and 18 kg to 21 kg (D) 75 days to 90 days and 12 kg to 15 kg (E) 55 days to 70 days and 9 kg to 11 kg

Description : In India, which one of the following should be considered the right combination of the age in days and live body weight in kg for a lamb for its weaning ? (A) 20 days to 30 days and 6 kg to 7 kg (B) 45 days to 60 ... (D) 75 days to 90 days and 12 kg to 15 kg (E) 55 days to 70 days and 9 kg to 11 kg

Last Answer : (C) 105 days to 120 days and 18 kg to 21 kg

If the number of lanes on the carriageway of a road is more than two, the total width of lane ways is equal to 3.0 m (A) + 0.60 m (B) + 0.70 m (C) + 0.90 m (D) + 1.50 m

Description : If the number of lanes on the carriageway of a road is more than two, the total width of lane ways is equal to 3.0 m (A) + 0.60 m (B) + 0.70 m (C) + 0.90 m (D) + 1.50 m

Last Answer : Answer: Option B

In a pre-stressed member it is advisable to use (A) Low strength concrete only (B) High strength concrete only (C) Low strength concrete but high tensile steel (D) High strength concrete and high tensile

Description : In a pre-stressed member it is advisable to use (A) Low strength concrete only (B) High strength concrete only (C) Low strength concrete but high tensile steel (D) High strength concrete and high tensile

Last Answer : Answer: Option D

Slump test of concrete is a measure of its (A) Consistency (B) Compressive strength (C) Tensile strength (D) Impact value

Description : Slump test of concrete is a measure of its (A) Consistency (B) Compressive strength (C) Tensile strength (D) Impact value

Last Answer : (A) Consistency

Slump test of concrete is a measure of its (A) Consistency (B) Compressive strength (C) Tensile strength (D) Impact value

Description : Slump test of concrete is a measure of its (A) Consistency (B) Compressive strength (C) Tensile strength (D) Impact value

Last Answer : (A) Consistency

A higher modular ratio shows (A) Higher compressive strength of concrete (B) Lower compressive strength of concrete (C) Higher tensile strength of steel (D) Lower tensile strength of steel

Description : A higher modular ratio shows (A) Higher compressive strength of concrete (B) Lower compressive strength of concrete (C) Higher tensile strength of steel (D) Lower tensile strength of steel

Last Answer : Answer: Option B

Modulus of rupture of concrete is a measure of (A) Flexural tensile strength (B) Direct tensile strength (C) Compressive strength (D) Split tensile strength

Description : Modulus of rupture of concrete is a measure of (A) Flexural tensile strength (B) Direct tensile strength (C) Compressive strength (D) Split tensile strength

Last Answer : Answer: Option A

Workability of concrete mix with low water cement ratio is determined by (A) Tensile strength test (B) Slump test (C) Compaction factor test (D) Flexural strength test

Description : Workability of concrete mix with low water cement ratio is determined by (A) Tensile strength test (B) Slump test (C) Compaction factor test (D) Flexural strength test

Last Answer : Answer: Option C

Allowable shear strength of concrete, depends upon (A) Shear strength (B) Tensile strength (C) Compressive strength (D) None of these

Description : Allowable shear strength of concrete, depends upon (A) Shear strength (B) Tensile strength (C) Compressive strength (D) None of these

Last Answer : Answer: Option A

Normally, the tensile strength of concrete is about____________of its compressive strength (a) 10 to 15% (b) 15 to 20% (c) 20 to 25% (d) 25 to 30%

Description : Normally, the tensile strength of concrete is about____________of its compressive strength (a) 10 to 15% (b) 15 to 20% (c) 20 to 25% (d) 25 to 30%

Last Answer : (a) 10 to 15%

Select the incorrect statement from the following In eccentrically loaded columns, [ A ] The tensile strength of concrete is ignored [ B ] Design stress – strain curve for steel in compression is the same as in tension [ C ] The strain at different points in the section will be same [ D ] Plane section remain plane even after bending

Description : Select the incorrect statement from the following In eccentrically loaded columns, [ A ] The tensile strength of concrete is ignored [ B ] Design stress - strain curve for steel in compression is the ... different points in the section will be same [ D ] Plane section remain plane even after bending

Last Answer : [ C ] The strain at different points in the section will be same

The tensile strength of concrete is about ________ of its compressive strength [ A ] 10% to 15% [ B ] 30% to 40% [ C ] 50% [ D ] 60% to 75%

Description : The tensile strength of concrete is about ________ of its compressive strength [ A ] 10% to 15% [ B ] 30% to 40% [ C ] 50% [ D ] 60% to 75%

Last Answer : [ A ] 10% to 15%

Slump test of concrete is a measure of its [ A ] Consistency [ B ] Compressive strength [ C ] Tensile strength [ D ] Impact value

Description : Slump test of concrete is a measure of its [ A ] Consistency [ B ] Compressive strength [ C ] Tensile strength [ D ] Impact value

Last Answer : [ A ] Consistency

Workability of concrete mix with low water cement ratio is determined by [ A ] Tensile strength test [ B ] Slump cone test [ C ] Compaction factor test [ D ] Flexural strength test

Description : Workability of concrete mix with low water cement ratio is determined by [ A ] Tensile strength test [ B ] Slump cone test [ C ] Compaction factor test [ D ] Flexural strength test

Last Answer : [ C ] Compaction factor test

For lime concrete, (A) Slump is 50 to 75 mm (B) Flexural strength at 90 days is 0.2 N/mm2 (C) Compressive strength at 90 days is 1.5 N/mm2 (D) All the above

Description : For lime concrete, (A) Slump is 50 to 75 mm (B) Flexural strength at 90 days is 0.2 N/mm2 (C) Compressive strength at 90 days is 1.5 N/mm2 (D) All the above

Last Answer : Answer: Option D

The Maximum strength attained in concrete in limit state design is generally taken as [ A ] fck [ B ] 0.67 fck [ C ] 0.45 fck [ D ] 0.30 fck

Description : The Maximum strength attained in concrete in limit state design is generally taken as [ A ] fck [ B ] 0.67 fck [ C ] 0.45 fck [ D ] 0.30 fck

Last Answer : [ C ] 0.45 fck

In plain sedimentation tanks under normal conditions, impurities are removed upto (A) 60 % (B) 70 % (C) 80 % (D) 90 %

Description : In plain sedimentation tanks under normal conditions, impurities are removed upto  (A) 60 %  (B) 70 %  (C) 80 %  (D) 90 %

Last Answer : (B) 70 % 

As per IS;456, in working stress method of design, permissible tensile stress for M20 grade concrete is given by [ A ] 1. 2 N/mm2 [ B ] 1.5 N/mm2 [ C ] 2.0 N/mm2 [ D ] 2.8 N/mm2

Description : As per IS;456, in working stress method of design, permissible tensile stress for M20 grade concrete is given by [ A ] 1. 2 N/mm2 [ B ] 1.5 N/mm2 [ C ] 2.0 N/mm2 [ D ] 2.8 N/mm2

Last Answer : [ D ] 2.8 N/mm2

For the construction of cement concrete dams, the maximum permissible size of the aggregates, is (A) 40 mm (B) 50 mm (C) 60 mm (D) 70 mm

Description : For the construction of cement concrete dams, the maximum permissible size of the aggregates, is (A) 40 mm (B) 50 mm (C) 60 mm (D) 70 mm

Last Answer : Answer: Option A

Percentage content of silica in window glass, is (A) 40 to 45 (B) 50 to 55 (C) 60 to 65 (D) 70 to 75

Description : Percentage content of silica in window glass, is (A) 40 to 45 (B) 50 to 55 (C) 60 to 65 (D) 70 to 75

Last Answer : Answer: Option D

The process of mixing, transporting, placing and compacting concrete using Ordinary Port land Cement should not take more than (A) 30 minutes (B) 40 minutes (C) 60 minutes (D) 90 minutes

Description : The process of mixing, transporting, placing and compacting concrete using Ordinary Port land Cement should not take more than (A) 30 minutes (B) 40 minutes (C) 60 minutes (D) 90 minutes

Last Answer : Answer: Option A

An exceptional grade may be provided upto 1 in 12 along hill roads, if the length does not exceed (A) 45 m per km(B) 60 m per km (C) 75 m per km (D) 90 m per km

Description : An exceptional grade may be provided upto 1 in 12 along hill roads, if the length does not exceed (A) 45 m per km (B) 60 m per km (C) 75 m per km (D) 90 m per km

Last Answer : Answer: Option B

The given figure shows schematic plan of blood circulation in humans with labels A to D. Identify the label and give its functions(a) C - Vena cava - Takes blood from body parts to right auricle, pCO2 = 45 mm Hg (b) D - Dorsal aorta - Takes blood from heart to body parts, pO2 = 95 mm Hg (c) A - Pulmonary vein - Takes impure blood from body parts, pO2 = 60 mm Hg (d) B - Pulmonary artery - Takes blood from heart to lungs, pO2 = 90 mm Hg.

Description : The given figure shows schematic plan of blood circulation in humans with labels A to D. Identify the label and give its functions. (a) C - Vena cava - Takes blood from body parts to right auricle, pCO2 = 45 ... 60 mm Hg (d) B - Pulmonary artery - Takes blood from heart to lungs, pO2 = 90 mm Hg

Last Answer : (a) C - Vena cava - Takes blood from body parts to right auricle, pCO2 = 45 mm Hg

Steel rods are used in reinforced concrete to increase its __________ strength. (A) Shear (B) Tensile (C) Compressive (D) None of these

Description : Steel rods are used in reinforced concrete to increase its __________ strength. (A) Shear (B) Tensile (C) Compressive (D) None of these

Last Answer : (B) Tensile

Steel rods are normally used for concrete reinforcement because concrete and steel have almost equal (A) Tensile strength (B) Compressive strength (C) Young's modulus (D) Thermal co-efficient of expansion

Description : Steel rods are normally used for concrete reinforcement because concrete and steel have almost equal (A) Tensile strength (B) Compressive strength (C) Young's modulus (D) Thermal co-efficient of expansion

Last Answer : (D) Thermal co-efficient of expansion

In the total proteins, the percentage of albumin is about (A) 20–40 (B) 30–45 (C) 50–70 (D) 80–90

Description : In the total proteins, the percentage of albumin is about (A) 20–40 (B) 30–45 (C) 50–70 (D) 80–90

Last Answer : Answer : C

Octane number (unleaded) of gasoline produced by isomerisation of butane may be about (A) 45 (B) 55 (C) 70 (D) 90

Description : Octane number (unleaded) of gasoline produced by isomerisation of butane may be about (A) 45 (B) 55 (C) 70 (D) 90

Last Answer : (C) 70

Avinash, Bala and Chandran invested Rs.45,000/-, Rs. 70, 000/- and Rs. 90,000/- respectively to start a business. At the end of two years, they earned a profit of Rs.1,64,000/-. What will be Bala’s share in the profit? a) Rs.56, 000/- b) Rs.46, 000/- c) Rs. 50, 000/- d) Rs.75, 000/- e) None of these

Description : Avinash, Bala and Chandran invested Rs.45,000/-, Rs. 70, 000/- and Rs. 90,000/- respectively to start a business. At the end of two years, they earned a profit of Rs.1,64,000/-. What will be Bala’s share in the profit? a) Rs.56, 000/- b) Rs.46, 000/- c) Rs. 50, 000/- d) Rs.75, 000/- e) None of these

Last Answer : Profit sharing ratio of Avinash,Bala & Chandran = 45000 : 70000 : 90,000 = 45 : 70 : 90 = 9 : 14 : 18 Bala's share of profit after two year =Rs.164000 × 14 × 41 = Rs. 4000 ×14 = Rs. 56000 Answer: a)

A hollow shaft of 1 m length is designed to transmit a power of 30 kW at 700 rpm. The maximum permissible angle of twist in the shaft is 1o. The inner diameter of the shaft is 0.7 times the outer diameter. The modulus of rigidity is 80 GPa. The outside diameter (in mm) of the shaft is _______. (a) 43 to 45 (b) 50to 60 (c) 70 to 80 (d) 85 to 100

Description : A hollow shaft of 1 m length is designed to transmit a power of 30 kW at 700 rpm. The maximum permissible angle of twist in the shaft is 1o. The inner diameter of the shaft is 0.7 times the outer diameter. The modulus of ... shaft is _______. (a) 43 to 45 (b) 50to 60 (c) 70 to 80 (d) 85 to 100

Last Answer : (a) 43 to 45

The relation between modulus of rupture fcr, splitting strength fcs and direct tensile strength fcl is given by (A) fcr - fcs = fcl (B) fcr > fcs > fcl (C) fcr < fcs < fcl (D) fcs > fcr > fcl

Description : The relation between modulus of rupture fcr, splitting strength fcs and direct tensile strength fcl is given by (A) fcr - fcs = fcl (B) fcr > fcs > fcl (C) fcr < fcs < fcl (D) fcs > fcr > fcl

Last Answer : Option B

Find the acceptance angle of a material which has a numerical aperture of 0.707 in air. a) 30 b) 60 c) 45 d) 90

Description : Find the acceptance angle of a material which has a numerical aperture of 0.707 in air. a) 30 b) 60 c) 45 d) 90

Last Answer : c) 45

In lossy dielectric, the phase difference between the electric field E and the magnetic field H is a) 90 b) 60 c) 45 d) 0

Description : In lossy dielectric, the phase difference between the electric field E and the magnetic field H is a) 90 b) 60 c) 45 d) 0

Last Answer : d) 0

Bed pressure drop in an air fluidised bed of catalyst particles (ρp = 200 kg/m3, Dp = 0.05 cm) of 60 cm bed depth and bed porosity of 0.5 expressed in cm of water (manometer) is (A) 90 (B) 60 (C) 45 (D) 30

Description : Bed pressure drop in an air fluidised bed of catalyst particles (ρp = 200 kg/m3, Dp = 0.05 cm) of 60 cm bed depth and bed porosity of 0.5 expressed in cm of water (manometer) is (A) 90 (B) 60 (C) 45 (D) 30

Last Answer : (B) 60

The compression in concrete (fc) at failure is given by [ A ] 0.30 fck [ B ] 0.45 fck [ C ] 0.50 fck [ D ] 0.75 fck

Description : The compression in concrete (fc) at failure is given by [ A ] 0.30 fck [ B ] 0.45 fck [ C ] 0.50 fck [ D ] 0.75 fck

Last Answer : [ B ] 0.45 fck

The percentage of the calcium eliminated in feces is (A) 10–20 (B) 30–40 (C) 50–60 (D) 70–90

Description : The percentage of the calcium eliminated in feces is (A) 10–20 (B) 30–40 (C) 50–60 (D) 70–90

Last Answer : Answer : D

Octane number of petrol normally used in petrol engines is of the order of a. 20-30 b. 40-60 c. 60-70 d. 80-90

Description : Octane number of petrol normally used in petrol engines is of the order of a. 20-30 b. 40-60 c. 60-70 d. 80-90

Last Answer : ANSWER d. 80-90

According to WHO, the bird flue virus cannot be transmitted through food cooked beyond - (1) 60 degrees celsius (2) 70 degrees celsius (3) 90 degrees celsius (4) 100 degrees celsius

Description : According to WHO, the bird flue virus cannot be transmitted through food cooked beyond - (1) 60 degrees celsius (2) 70 degrees celsius (3) 90 degrees celsius (4) 100 degrees celsius

Last Answer : (2) 70 degrees celsius Explanation: Outbreaks by the highly pathogenic H5N 1 avian influenza (bird flu) virus in poultry have raised, concerns about the source of infection and the risk to humans from ... parts of the poultry are fully cooked (no pink parts) and that eggs, too, are properly cooked

Octane number (unleaded) of reformed gasoline may be upto (A) 60 (B) 70 (C) 80 (D) 90

Description : Octane number (unleaded) of reformed gasoline may be upto (A) 60 (B) 70 (C) 80 (D) 90

Last Answer : (D) 90

What is the intensity of sound in normal conversation? (a) 10-20 dB (b) 30-60 dB (c) 70-90 dB (d) 120-150 dB

Description : What is the intensity of sound in normal conversation? (a) 10-20 dB (b) 30-60 dB (c) 70-90 dB (d) 120-150 dB

Last Answer : b) 30-60 dB

The least number that is divisible by all the numbers from 1 to 5 is: (a) 70 (b) 60 (c) 80 (d) 90

Description : The least number that is divisible by all the numbers from 1 to 5 is: (a) 70 (b) 60 (c) 80 (d) 90

Last Answer : (b) 60

amount of liquid that a man can spray in a day is: A. 60 litres liquid B. 70 litres liquid C. 80 litres liquid D. 90 litres liqui

Description : amount of liquid that a man can spray in a day is: A. 60 litres liquid B. 70 litres liquid C. 80 litres liquid D. 90 litres liquid

Last Answer : 90 litres liquid

Standard disc Plough consists of steel disc of _ diameter a) 20 to 40 cm. c) 60 to 90 cm b) 30 to 60 cm. d) 70 to 100 cm

Description : Standard disc Plough consists of steel disc of _ diameter a) 20 to 40 cm. c) 60 to 90 cm b) 30 to 60 cm. d) 70 to 100 cm

Last Answer :  60 to 90 cm

Standerd disc plough consist of steel dics of… to……. CM diameter. a. 60,90 c) 60,80 b. 70,100. d) 70,90

Description : Standerd disc plough consist of steel dics of… to……. CM diameter. a. 60,90 c) 60,80 b. 70,100. d) 70,90

Last Answer : 60,90

Standard disc plough diameter size is A. 40 to 60 cm C. 70 to 90 cm B. 60 to 90 cm D. 50 to 70 cm

Description : Standard disc plough diameter size is A. 40 to 60 cm C. 70 to 90 cm B. 60 to 90 cm D. 50 to 70 cm

Last Answer : 60 to 90 cm

Calculate the prime cost from the following information: Direct material purchased: Rs. 1,00,000 Direct material consumed: Rs. 90,000 Direct labour: Rs. 60,000 Direct expenses: Rs. 20,000 Manufacturing overheads: Rs. 30,000 (a) Rs. 1,80,000 (b) Rs. 2,00,000 (c) Rs. 1,70,000 (d) Rs. 2,10,000

Description : Calculate the prime cost from the following information: Direct material purchased: Rs. 1,00,000 Direct material consumed: Rs. 90,000 Direct labour: Rs. 60,000 Direct expenses: Rs. 20,000 Manufacturing overheads: Rs. 30,000 (a) Rs. 1,80,000 (b) Rs. 2,00,000 (c) Rs. 1,70,000 (d) Rs. 2,10,000

Last Answer : (c) Rs. 1,70,000

To dry fruits out-of-doors, humidity below ____ percent is best. a. 60 c. 80 b. 70 d. 90

Description : To dry fruits out-of-doors, humidity below ____ percent is best. a. 60 c. 80 b. 70 d. 90

Last Answer : a. 60

The number of heart beats on an average in an adult human is in the range of (1) 60-65 (2) 66-70 (3) 71-80 (4) 85-90

Description : The number of heart beats on an average in an adult human is in the range of (1) 60-65 (2) 66-70 (3) 71-80 (4) 85-90

Last Answer : 71-80