The Effective length of a column is defined as the [ A ] length between the fixed joints [ B ] length between the points of contra flexure [ C ] unsupported length of the column [ D ] Both (a) and (c)

The Effective length of a column is defined as the
[ A ] length between the fixed joints
[ B ] length between the points of contra flexure
[ C ] unsupported length of the column
[ D ] Both (a) and (c)
by

1 Answer

Answer :

[ B ] length between the points of contra flexure
by

Related questions

Point of contra-flexure is also called (a) Point of maximum Shear force (b) Point of maximum Bending moment (c) Point of inflexion (d) Fixed end

Description : Point of contra-flexure is also called (a) Point of maximum Shear force (b) Point of maximum Bending moment (c) Point of inflexion (d) Fixed end

Last Answer : (c) Point of inflexion

The Effective length of braced column generally varies…………the unsupported length of the column [ A ] 0.25 to 0.50 times [ B ] 0.50 to 1.00 times [ C ] 1.00 to 1.50 times [ D ] 2.00 to 2.50 times

Description : The Effective length of braced column generally varies…………the unsupported length of the column [ A ] 0.25 to 0.50 times [ B ] 0.50 to 1.00 times [ C ] 1.00 to 1.50 times [ D ] 2.00 to 2.50 times

Last Answer : [ B ] 0.50 to 1.00 times

In axial thrust diagram, at which point bending moment is zero? (a) Point of contra-flexure (b) Point of inflection (c) Both a. and b. (d) None of the above

Description : In axial thrust diagram, at which point bending moment is zero? (a) Point of contra-flexure (b) Point of inflection (c) Both a. and b. (d) None of the above

Last Answer : (c) Both a. and b.

Point of contra-flexure is a (a) Point where Shear force is maximum (b) Point where Bending moment is maximum (c) Point where Bending moment is zero (d) Point where Bending moment=0 but also changes sign from positive to negative

Description : Point of contra-flexure is a (a) Point where Shear force is maximum (b) Point where Bending moment is maximum (c) Point where Bending moment is zero (d) Point where Bending moment=0 but also changes sign from positive to negative

Last Answer : (d) Point where Bending moment=0 but also changes sign from positive to negative

Define point of contra-flexure of a loaded beam with sketch.

Description : Define point of contra-flexure of a loaded beam with sketch.

Last Answer : Point of Contra-flexure: It is the point in bending moment diagram where bending moment changes its sign from positive to negative and vice versa. At that point bending moment is equal to zero. This point is called as point of contra-flexure.

The unsupported height of column (Lo) is generally [ A ] Clear height of the column [ B ] Less than the clear height of the column [ C ] More than the clear height of the column [ D ] None of the above

Description : The unsupported height of column (Lo) is generally [ A ] Clear height of the column [ B ] Less than the clear height of the column [ C ] More than the clear height of the column [ D ] None of the above

Last Answer : [ A ] Clear height of the column

In a R.C section under flexure, the assumption that “a plane section before bending remains plane after bending” leads to (a) Strain distribution being linear across the depth (b) Stress distribution being linear across the depth (c) Both stress and strain distribution being linear across the depth (d) Shear stress distribution being uniform along the depth

Description : In a R.C section under flexure, the assumption that a plane section before bending remains plane after bending leads to (a) Strain distribution being linear across the depth (b) ... strain distribution being linear across the depth (d) Shear stress distribution being uniform along the depth

Last Answer : (a) Strain distribution being linear across the depth

Columns of given length, cross-section and material have different values of buckling loads for different end conditions. The strongest column is one whose (A) One end is fixed and other end is hinged (B) Both ends are hinged or pin jointed (C) One end is fixed and the other end entirely free (D) Both the ends are fixed

Description : Columns of given length, cross-section and material have different values of buckling loads for different end conditions. The strongest column is one whose (A) One end is fixed and other end is hinged (B) Both ... (C) One end is fixed and the other end entirely free (D) Both the ends are fixed

Last Answer : (D) Both the ends are fixed

The equivalent length of a column fixed at both ends, is (A) 0.5 l (B) 0.7 l (C) l (D) 1.5 l

Description : The equivalent length of a column fixed at both ends, is  (A) 0.5 l (B) 0.7 l (C) l (D) 1.5 l

Last Answer : (A) 0.5 l

Columns may be made of plain concrete if their unsupported lengths do not exceed their least lateral dimension (A) Two times (B) Three times (C) Four times (D) Five times

Description : Columns may be made of plain concrete if their unsupported lengths do not exceed their least lateral dimension (A) Two times (B) Three times (C) Four times (D) Five times

Last Answer : Answer: Option C

In limit state design of concrete for flexure, the area of stress block is taken as (a) 0.530 fck. Xu (b) 0.446 fck . Xu ( c) 0.420 fck .Xu (d) 0.360 fck . Xu Where fck is characteristic compressive strength of concrete and Xu is the depth of neutral axis from top.

Description : In limit state design of concrete for flexure, the area of stress block is taken as (a) 0.530 fck. Xu (b) 0.446 fck . Xu ( c) 0.420 fck .Xu (d) 0.360 fck . Xu Where fck is characteristic compressive strength of concrete and Xu is the depth of neutral axis from top.

Last Answer : (d) 0.360 fck . Xu

The effective length of a R.C column continuing through two storeys, properly restrained at both ends in position and direction, is (a) 0.50 L (b) 0.75 L (c) L (d) 2 L

Description : The effective length of a R.C column continuing through two storeys, properly restrained at both ends in position and direction, is (a) 0.50 L (b) 0.75 L (c) L (d) 2 L

Last Answer : (b) 0.75 L

The equivalent length of a column fixed at one end and free at the other end, is (A) 0.5 l (B) 0.7 l (C) 2 l (D) 1.5 l

Description : The equivalent length of a column fixed at one end and free at the other end, is (A) 0.5 l (B) 0.7 l (C) 2 l (D) 1.5 l

Last Answer : (C) 2 l

The ratio of the effective length of a column and minimum radius of gyration of its cross-sectional area, is known (A) Buckling factor (B) Slenderness ratio (C) Crippling factor (D) None of these

Description : The ratio of the effective length of a column and minimum radius of gyration of its cross-sectional area, is known (A) Buckling factor (B) Slenderness ratio (C) Crippling factor (D) None of these

Last Answer : (B) Slenderness ratio

If the effective length of a 32 cm diameter R.C.C. column is 4.40 m, its slenderness ratio, is (A) 40 (B) 45 (C) 50 (D) 55

Description : If the effective length of a 32 cm diameter R.C.C. column is 4.40 m, its slenderness ratio, is (A) 40 (B) 45 (C) 50 (D) 55

Last Answer : Answer: Option D

A column is regarded as long column if the ratio of its effective length and lateral dimension, exceeds (A) 10 (B) 15 (C) 20 (D) 25

Description : A column is regarded as long column if the ratio of its effective length and lateral dimension, exceeds (A) 10 (B) 15 (C) 20 (D) 25

Last Answer : Answer: Option B

According to IS: 4561978, the column or the strut is the member whose effective length is greater than (A) The least lateral dimension (B) 2 times the least lateral dimension (C) 3 times the least lateral dimension (D) 4 times the least lateral dimension

Description : According to IS: 4561978, the column or the strut is the member whose effective length is greater than (A) The least lateral dimension (B) 2 times the least lateral dimension (C) 3 times the least lateral dimension (D) 4 times the least lateral dimension

Last Answer : Answer: Option C

Along column is one whose ratio of effective length to its least lateral dimension exceeds (a) 5 (b) 10 (c) 12 (d) 20

Description : Along column is one whose ratio of effective length to its least lateral dimension exceeds (a) 5 (b) 10 (c) 12 (d) 20

Last Answer : (c) 12

When the ratio of the effective length of the rectangular columns to its lateral dimension exceeds12, then the column is said to be [ A ] Short column [ B ] Slender column [ C ] Biaxial column [ D ] All the above

Description : When the ratio of the effective length of the rectangular columns to its lateral dimension exceeds12, then the column is said to be [ A ] Short column [ B ] Slender column [ C ] Biaxial column [ D ] All the above

Last Answer : [ B ] Slender column

Slenderness ratio of the column is the ratio of [ A ] the effective length to width of column [ B ] the effective length to depth of column [ C ] the effective length to least lateral design [ D ] none of the above

Description : Slenderness ratio of the column is the ratio of [ A ] the effective length to width of column [ B ] the effective length to depth of column [ C ] the effective length to least lateral design [ D ] none of the above

Last Answer : [ C ] the effective length to least lateral design

What will be the output of the following Python code? >>> a={4,5,6}>>> b={2,8,6}>>> a+b a) {4,5,6,2,8} b) {4,5,6,2,8,6} c) Error as unsupported operand type for sets d) Error as the duplicate item 6 is present in both sets

Description : What will be the output of the following Python code? >>> a={4,5,6}>>> b={2,8,6}>>> a+b a) {4,5,6,2,8} b) {4,5,6,2,8,6} c) Error as unsupported operand type for sets d) Error as the duplicate item 6 is present in both sets

Last Answer : Answer: c Explanation: Execute in python shell to verify.

A column has its equivalent length equal to its length in case of a.one end fixed, other free b.both ends hinged c.one end hinged, other free d.107 dynes e.both end fixed

Description : A column has its equivalent length equal to its length in case of a.one end fixed, other free b.both ends hinged c.one end hinged, other free d.107 dynes e.both end fixed

Last Answer : b. both ends hinged

A column of length l is fixed at both ends. The equivalent length of the column is (A) l/2 (B) l/√2 (C) l (D) 2 l

Description : A column of length l is fixed at both ends. The equivalent length of the column is (A) l/2 (B) l/√2 (C) l (D) 2 l

Last Answer : (A) l/2

According to Euler’s column theory, the crippling load for a column of length (l) fixed at both ends is __________ the crippling load for a similar column hinged at both ends. (a) equal to (b) two times (c) four times (d) eight times

Description : According to Euler’s column theory, the crippling load for a column of length (l) fixed at both ends is __________ the crippling load for a similar column hinged at both ends. (a) equal to (b) two times (c) four times (d) eight times

Last Answer : (c) four times

A column of length (l) with both ends fixed may be considered as equivalent to a column of length __________ with both ends hinged. (a) l/8 (b) l/4 (c) l/2 (d) l

Description : A column of length (l) with both ends fixed may be considered as equivalent to a column of length __________ with both ends hinged. (a) l/8 (b) l/4 (c) l/2 (d) l

Last Answer : c) l/2

A column with maximum equivalent length has (a) both ends hinged (b) both ends fixed (c) one end fixed and the other end hinged (d) one end fixed and the other end free

Description : A column with maximum equivalent length has (a) both ends hinged (b) both ends fixed (c) one end fixed and the other end hinged (d) one end fixed and the other end free

Last Answer : (d) one end fixed and the other end free

Columns of given length, cross-section and material have different values of buckling loads for different end conditions. The strongest column is one whose (a) One end is fixed and other end is hinged (b) Both ends are hinged or pin jointed (c) One end is fixed and the other end entirely free (d) Both the ends are fixed

Description : Columns of given length, cross-section and material have different values of buckling loads for different end conditions. The strongest column is one whose (a) One end is fixed and other end is hinged (b) ... (c) One end is fixed and the other end entirely free (d) Both the ends are fixed

Last Answer : (d) Both the ends are fixed

The equivalent length of a column fixed at both ends, is (a) 0.5 l (b) 0.7 l (c) l (d) 1.5 l

Description : The equivalent length of a column fixed at both ends, is (a) 0.5 l (b) 0.7 l (c) l (d) 1.5 l

Last Answer : (a) 0.5 l

A column of length 4m with both ends fixed may be considered as equivalent to a column of length ………….with both ends hinged. (a) 2 m (b) 1 m (c) 3 m (d) 6 m

Description : A column of length 4m with both ends fixed may be considered as equivalent to a column of length ………….with both ends hinged. (a) 2 m (b) 1 m (c) 3 m (d) 6 m

Last Answer : For a long column subjected to 1 point axial compressive load, its buckling strength will be maximum when its

Pick up the incorrect statement (A) The cross-sectional area of the welded member is effective (B) A welded joint develops strength of its parent metal (C) Welded joints provide rigidity (D) Welding takes more time than riveting

Description : Pick up the incorrect statement (A) The cross-sectional area of the welded member is effective (B) A welded joint develops strength of its parent metal (C) Welded joints provide rigidity (D) Welding takes more time than riveting

Last Answer : (D) Welding takes more time than riveting

Top chord of a truss is continuous over joints l apart. Effective lengths of the member in the plane perpendicular to the truss is (a) 0.7 l (b) 0.85 l (c ) l (d) 1.5 l

Description : Top chord of a truss is continuous over joints l apart. Effective lengths of the member in the plane perpendicular to the truss is (a) 0.7 l (b) 0.85 l (c ) l (d) 1.5 l

Last Answer : (c ) l

Do you have a quasi-scientific theory of some kind, completely unresearched and unsupported, that you secretly like to believe even though you know the facts would probably disprove it?

Description : Do you have a quasi-scientific theory of some kind, completely unresearched and unsupported, that you secretly like to believe even though you know the facts would probably disprove it?

Last Answer : Yes I do. I have often wondered why cows (bovine) have four teets. I have my own theory about this, and I would like to know the real reason, but I like my theory too.

The ratio of endurance limit in shear to the endurance limit in flexure is (a) 0.25 (b) 0.40 (c) 0.55 (d) 0.70

Description : The ratio of endurance limit in shear to the endurance limit in flexure is (a) 0.25 (b) 0.40 (c) 0.55 (d) 0.70

Last Answer : (c) 0.55

The bur should be tilted lingually when preparing the occlusal surface of class II cavity on a mandibular first premolar in order to: I. Remove unsupported enamel II. Prevent encroachment on the buccal pulp horn III. Prevent encroachment on the lingual pulp horn IV. Maintain dentinal support of the lingual cusp A. I and II B. I and III C. II and IV D. III and IV E. IV only

Description : The bur should be tilted lingually when preparing the occlusal surface of class II cavity on a mandibular first premolar in order to: I. Remove unsupported enamel II. Prevent encroachment on the buccal pulp horn III. Prevent ... and II B. I and III C. II and IV D. III and IV E. IV only

Last Answer : C. II and IV

For lower premolars, the purpose of inclining the handpiece lingually is to, A. Avoid buccal pulp horn B. Avoid lingual pulp horn C. Remove unsupported enamel D. Conserve lingual dentine

Description : For lower premolars, the purpose of inclining the handpiece lingually is to, A. Avoid buccal pulp horn B. Avoid lingual pulp horn C. Remove unsupported enamel D. Conserve lingual dentine

Last Answer : A. Avoid buccal pulp horn

The ratio of crippling loads of a column having both the ends fixed to the column having both the ends hinged, is (A) 1 (B) 2 (C) 3 (D) 4

Description : The ratio of crippling loads of a column having both the ends fixed to the column having both the  ends hinged, is  (A) 1  (B) 2  (C) 3  (D) 4 

Last Answer : (D) 4 

While designing the pile as a column, the end conditions are nearly (A) Both ends hinged (B) Both ends fixed (C) One end fixed and other end hinged (D) One end fixed and other end free

Description : While designing the pile as a column, the end conditions are nearly (A) Both ends hinged (B) Both ends fixed (C) One end fixed and other end hinged (D) One end fixed and other end free

Last Answer : Answer: Option C

Pick up the correct statement from the following: (A) The length of the brass handle is included in the length of chain (B) The handles are on swivel joints to prevent twisting of the chain (C) The fifth tag from either end of the chain is numbered 5 (D) All the above

Description : Pick up the correct statement from the following: (A) The length of the brass handle is included in the length of chain (B) The handles are on swivel joints to prevent twisting of the chain (C) The fifth tag from either end of the chain is numbered 5 (D) All the above

Last Answer : (D) All the above

Expansion joints are provided if the length of concrete structures exceeds (A) 10 m (B) 15 m (C) 15 m (D) 45m

Description : Expansion joints are provided if the length of concrete structures exceeds (A) 10 m (B) 15 m (C) 15 m (D) 45 m

Last Answer : Answer: Option D

Expansion joints in masonry walls are provided if length exceeds (A) 10 m (B) 20 m (C) 30 m (D) 40 m

Description : Expansion joints in masonry walls are provided if length exceeds (A) 10 m (B) 20 m (C) 30 m (D) 40 m

Last Answer : Answer: Option D

In joints, the bones invovled are joined together with the help of cargtilages. The joint between the adjacent vertebrae in the vertebral column is of

Description : In joints, the bones invovled are joined together with the help of cargtilages. The joint between the adjacent vertebrae in the vertebral column is of

Last Answer : In joints, the bones invovled are joined together with the help of cargtilages. The joint between ... pattern and it permits limited movements, is-

Select the correct statement with respect to locomotion in humans. (a) The vertebral column has 10 thoracic vertebrae. (b) The joint between adjacent vertebrae is a fibrous joint. (c) A decreased level of progesterone causes osteoporosis in old people. (d) Accumulation of uric acid crystals in joints causes their inflammation

Description : Select the correct statement with respect to locomotion in humans. (a) The vertebral column has 10 thoracic vertebrae. (b) The joint between adjacent vertebrae is a fibrous joint. (c) A ... osteoporosis in old people. (d) Accumulation of uric acid crystals in joints causes their inflammation

Last Answer : (d) Accumulation of uric acid crystals in joints causes their inflammation.

Match the items given in column I with those in column II and select the correct option given below. Column I Column II A. Glycosuria (i) Accumulation of uric acid in joints B. Gout (ii) Mass of crystallised salts within the kidney C. Renal calculi (iii) Inflammation in glomeruli D. Glomerular (iv) Presence of glucose in nephritis urine A B C D (a) (iii) (ii) (iv) (i) (b) (i) (ii) (iii) (iv) (c) (ii) (iii) (i) (iv) (d) (iv) (i) (ii) (iii)

Description : Match the items given in column I with those in column II and select the correct option given below. Column I Column II A. Glycosuria (i) Accumulation of uric acid in joints B. Gout (ii) Mass of crystallised salts within the kidney ... (iii) (iv) (c) (ii) (iii) (i) (iv) (d) (iv) (i) (ii) (iii)

Last Answer : (d) (iv) (i) (ii) (iii)

The ratio of the effective length of a column and minimum radius of gyration of its cross sectionalarea, is known (a) Buckling factor (b) Slenderness ratio (c) Crippling factor (d) None of these

Description : The ratio of the effective length of a column and minimum radius of gyration of its cross sectionalarea, is known (a) Buckling factor (b) Slenderness ratio (c) Crippling factor (d) None of these

Last Answer : (b) Slenderness ratio

Define effective length in column with its application.

Description : Define effective length in column with its application.

Last Answer : Effective Length: The length of the column which bends or deflects as if it is hinged at its ends is called as effective length. It is denoted by Le.  Application: It is used in Rankine’s and Euler’s formula to determine buckling load on column

Euler's formula states that the buckling load for a column of length , both ends hinged and whose least moment of inertia and modulus of elasticity of the material of the column are and respectively, is given by the relation (A) P = ²EI/l² (B) P = /EI (C) P = /l² (D) P = ²EI/l

Description : Euler's formula states that the buckling load for a column of length , both ends hinged and whose least moment of inertia and modulus of elasticity of the material of the column are and respectively, is given by the relation (A) P = ²EI/l² (B) P = /EI (C) P = /l² (D) P = ²EI/l

Last Answer : (A) P = ²EI/l²

Pick out the wrong statement. (A) Longer tubes are less expensive per unit heat transfer area as compared to shorter tubes (B) A cost index is merely a number for a given year showing the cost at that time relative to a certain base year (C) Turnover ratio of a chemical plant is the ratio of gross annual sales to the fixed capital investment (D) Plates with butt welded joints are less expensive compared to lap welded joints, because squaring of plates is not necessary

Description : Pick out the wrong statement. (A) Longer tubes are less expensive per unit heat transfer area as compared to shorter tubes (B) A cost index is merely a number for a given year ... butt welded joints are less expensive compared to lap welded joints, because squaring of plates is not necessary

Last Answer : (D) Plates with butt welded joints are less expensive compared to lap welded joints, because squaring of plates is not necessary

A string of length L is fixed between two points. If a standing wave of 5 nodes is produced, what is the relationship between the string's length, L, and its wavelength?

Description : A string of length L is fixed between two points. If a standing wave of 5 nodes is produced, what is the relationship between the string's length, L, and its wavelength?

Last Answer : ANSWER: WAVELENGTH = 1/2 L

The effective width of a column strip of a flat slab, is (A) One-fourth the width of the panel (B) Half the width of the panel (C) Radius of the column (D) Diameter of the column

Description : The effective width of a column strip of a flat slab, is (A) One-fourth the width of the panel (B) Half the width of the panel (C) Radius of the column (D) Diameter of the column

Last Answer : Answer: Option B

Critical section for shear in case of flat slabs is at a distance of (A) Effective depth of slab from periphery of column/drop panel (B) d/2 from periphery of column/capital/ drop panel (C) At the drop panel of slab (D) At the periphery of column

Description : Critical section for shear in case of flat slabs is at a distance of (A) Effective depth of slab from periphery of column/drop panel (B) d/2 from periphery of column/capital/ drop panel (C) At the drop panel of slab (D) At the periphery of column

Last Answer : Answer: Option B