Too wet concrete may cause
(A) Weakness of concrete
(B) Excessive laitance
(C) Segregation
(D) All the above

1 Answer

Answer :

(D) All the above

Related questions

Description : Pick up the correct statement from the following: (A) Sand stones may be divided into calcareous, siliceous and ferruginous sand stones (B) Concrete using sand stones, cracks due to excessive shrinkage (C) Broken bricks produce a concrete having good fire resisting qualities (D) All the above

Last Answer : Answer: Option D

Description : Segregation is responsible for (A) Honey-combed concrete (B) Porous layers in concrete (C) Surface scaling in concrete (D) All the above

Last Answer : (D) All the above

Description : The increased cohesiveness of concrete, makes it (A) Less liable to segregation (B) More liable to segregation (C) More liable to bleeding (D) More liable for surface scaling in frosty weather

Last Answer : Answer: Option A

Description : Separation of water or water sand cement from a freshly concrete, is known (A) Bleeding (B) Creeping (C) Segregation (D) Flooding

Last Answer : Answer: Option A

Description : To prevent segregation, the maximum height for placing concrete, is (A) 100 cm (B) 125 cm (C) 150 cm (D) 200 cm

Last Answer : Answer: Option A

Description : The property of the ingredients to separate from each other while placing the concrete is called (A) Segregation (B) Compaction (C) Shrinkage (D) Bulking

Last Answer : Answer: Option A

Description : The concrete mix which causes difficulty in obtaining a smooth finish, possess (A) Segregation (B) Internal friction (C) Hardness (D) Bleeding

Last Answer : Answer: Option C

Description : Pick up the correct statement from the following: (A) Continuous grading is not necessary for obtaining a minimum of air voids (B) The omission of a certain size of aggregate is shown by ... in concrete increases the workability but also increases the liability to segregation (D) All the above

Last Answer : Answer: Option D

Description : The property of fresh concrete, in which the water in the mix tends to rise to the surface while placing and compacting, is called (A) Segregation (B) Bleeding (C) Bulking (D) Creep

Last Answer : Answer: Option B

Description : Pick up the correct statement from the following: (A) Segregation is necessary for a workable concrete (B) Consistency does not affect the workability of concrete (C) If the concrete mix is dry, the slump is maximum (D) None of these

Last Answer : Answer: Option D

Description : A concrete using an air entrained cement (A) Has strength less than 10% to 15% (B) Has more resistance to weathering (C) Is more plastic and workable (D) Is free from segregation and bleeding

Last Answer : Answer: Option C

Description : A badly mixed cement concrete results in (A) Segregation (B) Bleeding (C) Honey combing (D) None of these

Last Answer : Answer: Option C

Description : To prevent segregation the concrete should to be thrown from a height of more than. (a) ½ m (b) 1m (c) 1.5m (d) 2m

Last Answer : (b) 1m

Description : Excess quantity of water (a) Makes the concrete mix harsh (b) Makes the concrete mix unworkable (c) Causes segregation in concrete (d) Causes bleeding in concrete.

Last Answer : both c&d

Description : Insufficient quantity of water (a) Makes the concrete mix harsh (b) Makes the concrete mix unworkable (c) Causes segregation in concrete (d) Causes bleeding in concrete.

Last Answer : both a&b

Description : Segregation of concrete (a) Increases the strength of concrete (b) Decreased the strength of concrete. (c) Not effect to strength of concrete. (d) None of these.

Last Answer : (b) Decreased the strength of concrete.

Description : In order to avoid segregation, the concrete should not be thrown from a height (a) Agree (b) Disagree (c) Not known (d) None of these

Last Answer : (a) Agree

Description : Segregation in concrete results in (a) Honey combing (b) Porous Layers (c) Surface scaling (d) All the above

Last Answer : (d) All the above

Description : The continuous strain, which the concrete undergoes due to application of external loads is called [ A ] Creep [ B ] Bleeding [ C ] Workability [ D ] Segregation

Last Answer : [ A ] Creep

Description : The separation of water or water cement mixture from the freshly laid concrete is known as [ A ] Workability [ B ] Segregation [ C ] Bleeding [ D ] Creep

Last Answer : [ C ] Bleeding

Description : In order to avoid segregation, fresh concrete should be dropped from a height of [ A ] Less than one meter [ B ] Less than two metres [ C ] More than one metre [ D ] More than two metres

Last Answer : [ A ] Less than one meter

Description : Steels with high carbon equivalent have poor Weldability, because in these steels during welding (A) Carbon and other alloying elements get oxidised from the weld pool (B) Excessive ferrite forms in the ... of carbon and other element occurs in the weld pool leading to poor properties of the weld

Last Answer : (C) Martensite forms in the heat affected zone leading to poor toughness/ductility of the weld

Description : Which of the following was a reason for the Great Depression? (a) Weakness in American Banking System (b) International Economic imbalance of trade (c) Low American wages gave inadequate purchasing power to support excessive capital investment (d) All of these

Last Answer : d) All of these

Description : Excessive camber on pavements may cause (A) Deterioration of central portion (B) Slip of the speedy vehicles towards the edges (C) Erosion of the berms (D) All the above

Last Answer : Answer: Option D

Description : Explain two causes of each i) Segregation ii) Bleeding of concrete

Last Answer : Causes of Segregation: 1. Inaccurate water cement ratio. 2. Improper mixing of concrete ingredients. 3. Longer distance transportation. 4. More height of concrete placing. 5. Excessive or over ... Lean mix i.e. less cements content. 5. Delay in finishing of freshly placed concrete mix.

Description : Non-uniform compaction may cause the concrete (A) Porous (B) Non-homogeneous (C) Reduced strength (D) All the above

Last Answer : Answer: Option D

Description : Pick up the correct statement from the following: (A) Sand obtained from pits, is washed to remove clay and silt (B) Sand obtained from flooded pits, need not be washed before use (C) The ... shore sand and shingle may cause corrosion of reinforcement if the concrete is porous (D) All the above

Last Answer : Answer: Option D

Description : Both hydrarch and xerarch successions lead to (a) medium water conditions (b) xeric conditions (c) highly dry conditions (d) excessive wet conditions.

Last Answer : (a) medium water conditions

Description : Motor starter or controller contacts may become welded together if the contacts _____________. A. open too quickly and arc B. close under excessive pressure C. open or close too quickly D. close under excessive starting current

Last Answer : Answer: D

Description : The main cause of meandering is (A) Presence of an excessive bed slope in the river (B) Degradation (C) The extra turbulence generated by the excess of river sediment during floods (D) None of the above

Last Answer : Answer: Option C

Description : If an AC generator experiences voltage failure, the cause may be _____________. A. an open in the field circuit B. the brushes shifting out of the neutral plane C. excessive locked-rotor current D. a rotating slip ring

Last Answer : Answer: A

Description : If a magnetic controller relay fails to drop out when the coil voltage is removed from the relay, the probable cause may be _____________. A. excessive spring tension B. overvoltage C. excessive current D. welded contacts

Last Answer : Answer: D

Description : Which of the following categories of medications may result in seizure activity if withdrawn suddenly? a) Tranquilizers Abrupt withdrawal of tranquilizers may result in anxiety, tension, ... may cause excessive respiratory depression during anesthesia due to an associated electrolyte imbalance.

Last Answer : a) Tranquilizers Abrupt withdrawal of tranquilizers may result in anxiety, tension, and even seizures if withdrawn suddenly.

Description : What is the most common cause of solid size segregation in bulk solid systems?

Last Answer : Many engineers usually point directly to the pneumatic conveying system as a source of such a problem. The truth is that in most cases, segregation occurs because of the differences in ... problem is occurring. Reference: Richard Farnish, the Wolfson Centre for Bulk Solids Handling Technology

Description : Pick up the correct statement from the following:  (A) Lime may be used to soften the hard water  (B) Excessive use of lime may kill the bacterias  (C) Excessive lime when added to water, raises its pH value  (D) All the above 

Last Answer : (D) All the above 

Description : Separation of coarse aggregates from mortar during transportation, is known (A) Bleeding (B) Creeping (C) Segregation (D) Shrinkage

Last Answer : Answer: Option C

Description : The risk of segregation is more for (A) Wetter mix (B) Larger proportion of maximum size aggregate (C) Coarser grading (D) All the above

Last Answer : Answer: Option D

Description : Consider the following statements: Cement mortars richer than 1 : 3 are not used in masonry work because 1. There is no gain in strength of masonry 2. There is high shrinkage 3. They are prone to segregation Which of these statements ... 1, 2 and 3 (b) 1 and 2 only (c) 2 and 3 only (d) 1 and 3 only

Last Answer : (b) 1 and 2 only

Description : During the process of hardening of cement, _______ will takes place [ A ] Bleeding [ B ] Segregation [ C ] Hydration [ D ] All the above

Last Answer : [ C ] Hydration

Description : Which of the following statements is an not an example of an inherent limitation of internal control? a. The effectiveness of control procedures depends on segregation of duties. b. ... nonroutine transactions. d. The cost-benefit relationship is a primary criterion in designing internal contro

Last Answer : The effectiveness of control procedures depends on segregation of duties

Description : Too much fineness of cement (a) Results cracks in concrete (b) Generates greater heat (c) Develops later strength (d) All the above

Last Answer : (d) All the above

Description : Which of the following is a weakness of bar chart? (A) Interdependencies of activities (B) Project progress (C) Uncertainties (D) All of the above

Last Answer : (D) All of the above

Description : Driving vehicles on wet surfaced roads, is dangerous because it may (A) Skid (B) Slip (C) Overturn (D) All the above

Last Answer : Answer: Option B

Description : How come after it rains some concrete walkways are wet while others are dry?

Last Answer : That would be my bet. I see it too.

Description : Suggest one type of materials for water proofing for the following situations. i. Rising dampness in building ii. Leakages in dam iii. Concrete continuously in wet or damp condition iv. Leakages in lavatory ,bathroom and kitchen floor v. Cracks on plastered surface vi. Cracks on roof surface

Last Answer : i. Flexible materials like butyl rubber, hot bitumen (asphalt), plastic sheets, bituminous felts, sheets of lead. ii. Liquid applied cementitious membranes iii. Liquid applied cementitious membranes ... v. Liquid applied cementitious membranes. vi. Brick bat coba, liquid applied bituminous membrane.

Description : Explain the rebound hammer test procedure and show the relationship between compressive strength and rebound number with hammer horizontal and vertical on dry and wet surface of concrete.

Last Answer : Rebound Hammer Test: i. Initially the plunger of rebound hammer is Kept touching to the target concrete surface ii. Then the tubular casing of hammer is pushed towards concrete, so that the spring gets ... of concrete will be less, But if it is more, then concrete possess sufficient strength.

Description : When load is applied on concrete pavement (A) Away from edges, the maximum bending moment is negative (B) Away from edges, the maximum bending moment cause compression (C) On the edges, the maximum stress is parallel to the edge of the slab (D) None of these

Last Answer : Answer: Option C

Description : Admixtures which cause early setting and hardening of concrete are called (A) Workability admixtures (B) Accelerators (C) Retarders (D) Air entraining agents

Last Answer : Answer: Option B

Description : The deleterious materials present in the aggregate (a) Prevent normal hydration of cement (b) Reduce the strength and durability of concrete. (c) Modify the setting action and cause efloresecence. (d) All of the above

Last Answer : (d) All of the above