Which of the following complete sets do not recommend the siting of a harbor layout in that vicinity ? 1. Submarine canyon 2. Lee of an island 3. Closely located promontories 4. Indentation coves on the coastline 5. Hooked bays with not-so-rugged rocky bottom (a) 2, 3, 4 and 5 (b) 1, 4 and 5 only (c) 2, 3 and 4 only (d) 3, 4 and 5 only

Which of the following complete sets do not recommend the siting of a harbor layout in that vicinity ?
 1. Submarine canyon
 2. Lee of an island
 3. Closely located promontories
 4. Indentation coves on the coastline
 5. Hooked bays with not-so-rugged rocky bottom
 (a) 2, 3, 4 and 5 (b) 1, 4 and 5 only (c) 2, 3 and 4 only (d) 3, 4 and 5 only
by

1 Answer

Answer :

(a) 2, 3, 4 and 5
by

Related questions

A supercharger is used in the engines of earthmoving machines at higher altitudes because (a) The ambient atmospheric pressure is less at higher altitudes (b) Four-cycle engines depend on the suction of the engines for the supply of air (c) Two-cycle engines are not rugged enough for higher altitude (d) The ambient temperature is less as the altitude is higher

Description : A supercharger is used in the engines of earthmoving machines at higher altitudes because (a) The ambient atmospheric pressure is less at higher altitudes (b) Four-cycle engines depend on the suction ... rugged enough for higher altitude (d) The ambient temperature is less as the altitude is higher

Last Answer : (a) The ambient atmospheric pressure is less at higher altitudes

The impeachment of the President of India can be initiated in - (1) either house of the Parliament (2) a joint siting of both houses of the Parliament (3) the Lok Sabha alone (4) the Rajya Sabha alone

Description : The impeachment of the President of India can be initiated in - (1) either house of the Parliament (2) a joint siting of both houses of the Parliament (3) the Lok Sabha alone (4) the Rajya Sabha alone

Last Answer : (1) either house of the Parliament Explanation: Under Article 61, the President of India can be removed from the office by a process of impeachment for the violation of the Constitution. The impeachment is to be initiated by either House of Parliament.

What cant Truman get on the ferry to harbor island?

Description : What cant Truman get on the ferry to harbor island?

Last Answer : Need answer

Would you buy water at a water machine located in the vicinity of a fuel station?

Description : Would you buy water at a water machine located in the vicinity of a fuel station?

Last Answer : I’m not aware of what a penguin water machine is. I assume it’s one of those that’s connected to a municipal water supply and it filters and cleans the water before it dispenses it. I would like it to be inside a store, but yes, I’d buy water from such a machine.

Pick up the correct statement from the following: (A) Higher the gauge, more deficient will be the rain catch (B) Heavier the rain, lesser will be the rain catch (C) The trees serving as wind brakes in the vicinity of the gauge, should not subtend angles greater than 45° (D) All the above

Description : Pick up the correct statement from the following: (A) Higher the gauge, more deficient will be the rain catch (B) Heavier the rain, lesser will be the rain catch (C) The trees serving as wind brakes in the vicinity of the gauge, should not subtend angles greater than 45° (D) All the above

Last Answer : Answer: Option D

The depth of the ground water table may be ascertained by (A) Looking through the well in the vicinity (B) Standing on the well in the vicinity (C) Measuring the depth of water in the well (D) None of the abov

Description : The depth of the ground water table may be ascertained by (A) Looking through the well in the vicinity (B) Standing on the well in the vicinity (C) Measuring the depth of water in the well (D) None of the abov

Last Answer : Answer: Option C

Information travels between components on the mother board 1 through1) Flash memory 2) CMOS 3)Bays 4) Buses 5) Peripherals

Description : Information travels between components on the mother board 1 through1) Flash memory 2) CMOS 3)Bays 4) Buses 5) Peripherals

Last Answer : Answer :4

What long narrow bays usually surrounded by high Scandinavian mountain are called?

Description : What long narrow bays usually surrounded by high Scandinavian mountain are called?

Last Answer : They're called Fjords. (pronounced fee-ords)

Why earth switches are provided in 220 kV bays?

Description : Why earth switches are provided in 220 kV bays?  

Last Answer : When bay CB trips, both end (station and grid) CB will trip. The earth switches are provided because the grid will always be alive so to prevent any shocks to the operator or maintenance personnel who is working on the line or bay due to accidental energizing of the bus.  

What is the maximum number of open bays if transverse zig zag bracing is installed along the width of a birdcage scaffold? a. Four b. Three c. Five d. Six

Description : What is the maximum number of open bays if transverse zig zag bracing is installed along the width of a birdcage scaffold? a. Four b. Three c. Five d. Six

Last Answer : b. Three

Do they make a PDA ment for rugged use?

Description : Do they make a PDA ment for rugged use?

Last Answer : A PDA is like a small handheld computer in which it would not be meant for rough use.

Are the Rugged Ridge products good for Jeeps?

Description : Are the Rugged Ridge products good for Jeeps?

Last Answer : The Rugged Ridge products are the most highly recommended products for jeeps. They are also the most commonly used. They come in various colors and are also in different materials.

Where can I buy a handheld computer that will handle rugged conditions?

Description : Where can I buy a handheld computer that will handle rugged conditions?

Last Answer : There are companies that offer handheld computers. One is trimble, here is a link to their website: www.trimble.com/Outdoor-Rugged-Computers/ and another is intermec, here is a link to their website also: www.intermec.com/.../computers/handheld_computers/index.aspx

Diesel tractors are equipped with a more rugged starting motor ofa) 6 or 12 volts b) 12 or 24 volts c) 6 or 24 volts d) 12 or 36 volts

Description : Diesel tractors are equipped with a more rugged starting motor ofa) 6 or 12 volts b) 12 or 24 volts c) 6 or 24 volts d) 12 or 36 volts

Last Answer : c) 6 or 24 volts

Load cells used for the measurement of weight has (A) Compact & rugged construction with an accuracy of 0.1 to 1% (B) No moving parts and incurs negligible deflection under load (C) Provision of thermal compensation and is hermetically sealed (D) All 'a', 'b' & 'c'

Description : Load cells used for the measurement of weight has (A) Compact & rugged construction with an accuracy of 0.1 to 1% (B) No moving parts and incurs negligible deflection under load (C) Provision of thermal compensation and is hermetically sealed (D) All 'a', 'b' & 'c'

Last Answer : (D) All 'a', 'b' & 'c'

At which place is the harbor of the Indus Valley Civilization located? -General Knowledge

Description : At which place is the harbor of the Indus Valley Civilization located? -General Knowledge

Last Answer : answer:

Why were colonies located by the water harbor?

Description : Why were colonies located by the water harbor?

Last Answer : Because all transportation was by ship. There were no highways,railroads or airplanes.

Steel bars are generally connected together to get greater length than the standard length by providing (A) Straight bar splice (B) Hooked splice (C) Dowel splice (D) All the above

Description : Steel bars are generally connected together to get greater length than the standard length by providing (A) Straight bar splice (B) Hooked splice (C) Dowel splice (D) All the above

Last Answer : Answer: Option D

What is the indentation under nose that bumps into tips of upper lip called?

Description : What is the indentation under nose that bumps into tips of upper lip called?

Last Answer : there is a word for it, and I am not sure how you spell it, but is sounds very simiar to dybbuk or dibic...

Why would a programmer use spaces instead of tabs for indentation?

Description : Why would a programmer use spaces instead of tabs for indentation?

Last Answer : Because the programmer works with other programmers, some of whom have their editors set to expand tabs to 8 spaces, others of whom have their editors set to expand tabs to 4 spaces, and still others of whom ... use only spaces than it is to get everyone to agree on how wide a tab stop should be.

Write the CSS code to: (i) Apply 50px indentation to all text paragraphs marked with <p>. -Technology

Description : Write the CSS code to: (i) Apply 50px indentation to all text paragraphs marked with . -Technology

Last Answer : P{text-indent: 50px;font-style: italic;}

Which of the following is not true with regard to the coastal plains of India ? (a) The west coast has a narrow alluvial margin interspersed by hilly terrain (b) The eastern coast has a wide plain with well-developed deltas of the major rivers (c) The west coast has little indentation except towards the south (d) The west and east coasts, have the same alluvial features

Description : Which of the following is not true with regard to the coastal plains of India ? (a) The west coast has a narrow alluvial margin interspersed by hilly terrain (b) The eastern coast has a ... little indentation except towards the south (d) The west and east coasts, have the same alluvial features

Last Answer : Ans: (d)

The ability of a material to offer resistance to scratching or indentation is a measure of its (A) Brittleness (B) Toughness (C) Hardness (D) Resilience

Description : The ability of a material to offer resistance to scratching or indentation is a measure of its (A) Brittleness (B) Toughness (C) Hardness (D) Resilience

Last Answer : (C) Hardness

FOLLOW UP IN NEWS WRITING MEANS: a) A story giving later development of a story one printed earlier. It is a second day story also a subsidiary story following a big lead or similar subject b) A paragraph without indentation c) An addition to news item sent for publication d) None of these

Description : FOLLOW UP IN NEWS WRITING MEANS: a) A story giving later development of a story one printed earlier. It is a second day story also a subsidiary story following a big lead or similar subject b) A paragraph without indentation c) An addition to news item sent for publication d) None of these

Last Answer : a) A story giving later development of a story one printed earlier. It is a second day story also a subsidiary story following a big lead or similar subject

_________ of test specimens is not involved in any hardness testing method. (A) Fracture (B) Indentation (C) Wear (D) Scratch

Description : _________ of test specimens is not involved in any hardness testing method. (A) Fracture (B) Indentation (C) Wear (D) Scratch

Last Answer : (A) Fracture

Mho's scale of hardness, which consists of 10 standard minerals is used for the measurement of __________ hardness. (A) Scratch (B) Indentation (C) Dynamic (D) Rebound

Description : Mho's scale of hardness, which consists of 10 standard minerals is used for the measurement of __________ hardness. (A) Scratch (B) Indentation (C) Dynamic (D) Rebound

Last Answer : (A) Scratch

The difference in one unit of Rockwell hardness number corresponds to a difference in the depth of indentation of __________ mm. (A) 0.001 (B) 0.01 (C) 0.002 (D) 0.02

Description : The difference in one unit of Rockwell hardness number corresponds to a difference in the depth of indentation of __________ mm. (A) 0.001 (B) 0.01 (C) 0.002 (D) 0.02

Last Answer : Option C

The alignment of beginning and the end of lines is referred to as (1) Indentation (2) Justification (3) Superscript (4) Font

Description : The alignment of beginning and the end of lines is referred to as (1) Indentation (2) Justification (3) Superscript (4) Font

Last Answer : Justification

What's the significance of stores posting signs warning the public of the risk of cancer-causing products and chemicals in their vicinity?

Description : What's the significance of stores posting signs warning the public of the risk of cancer-causing products and chemicals in their vicinity?

Last Answer : answer:I believe it has to do with Proposition 65, SAFE DRINKING WATER AND TOXIC ENFORCEMENT ACT OF 1986 You often see labeling that is required by the act on products that reads something like: WARNING: This ... does California know that my state doesn't know? What's my state not telling us? :-)

Why does the weather in the vicinity of the sirens change suddenly what would be the reason?

Description : Why does the weather in the vicinity of the sirens change suddenly what would be the reason?

Last Answer : Feel Free to Answer

In case of __________ boiling, the liquid temperature is below the saturation temperature and the boiling takes place in the vicinity of the heated surface. (A) Nucleate (B) Local (C) Pool (D) Saturated

Description : In case of __________ boiling, the liquid temperature is below the saturation temperature and the boiling takes place in the vicinity of the heated surface. (A) Nucleate (B) Local (C) Pool (D) Saturated

Last Answer : (B) Local

_________________ is the name given to a gaseous phase that is in contact with the liquid phase, or that is in the vicinity of a state where some of it might be condensed.  a) Vapor  b) Saturated Vapor  c) Superheated Vapor  d) Wet Vapor

Description : _________________ is the name given to a gaseous phase that is in contact with the liquid phase, or that is in the vicinity of a state where some of it might be condensed.  a) Vapor  b) Saturated Vapor  c) Superheated Vapor  d) Wet Vapor

Last Answer : Vapor

Fill in the blanks with the appropriate option. _________ coal mines are in the vicinity, and there are manufactures of iron and steel, mill machinery, door and sash factories, etc., as well as several shipbuilding yards. (a) Intensive (b) Extensive (c) Substantial (d) Wideranging

Description : Fill in the blanks with the appropriate option. _________ coal mines are in the vicinity, and there are manufactures of iron and steel, mill machinery, door and sash factories, etc., as well as several shipbuilding yards. (a) Intensive (b) Extensive (c) Substantial (d) Wideranging 

Last Answer : Ans: b) Extensive 

Case-study method denotes Options: A) The study of a case in its vicinity B) The extensive study of a 'Case' C) The cumulative study of a case D) All the above

Description : Case-study method denotes Options: A) The study of a case in its vicinity B) The extensive study of a 'Case' C) The cumulative study of a case D) All the above

Last Answer : D) All the above 

When the Mohalla Samiti asks to donate some money for the repairing works of Hand pipe in the vicinity, then what will you do? Options: A) You will not contribute as it has no utility for you B) You will contribute according to your will in a selfless manner C) You will find faults in the samiti and its collections D) You will pay some money in order to warn them not to pay visit in future

Description : When the Mohalla Samiti asks to donate some money for the repairing works of Hand pipe in the vicinity, then what will you do? Options: A) You will not contribute as it has no utility for you B) ... and its collections D) You will pay some money in order to warn them not to pay visit in future

Last Answer : B) You will contribute according to your will in a selfless manner 

The Grand Canyon is located on the : (1) Colorado River (2) Rhine River (3) Tapi River (4) Niger River

Description : The Grand Canyon is located on the : (1) Colorado River (2) Rhine River (3) Tapi River (4) Niger River

Last Answer : (1) Colorado River Explanation: The Grand Canyon is a steepsided canyon carved by the Colorado River in the United States in the state of Arizona. It is contained within and managed by Grand Canyon ... an impact on the Grand Canyon is erosion, primarily by water (and ice) and second by wind.

The Grand Canyon is located on the : (1) Colorado River (2) Rhine River (3) Tapi River (4) Niger River

Description : The Grand Canyon is located on the : (1) Colorado River (2) Rhine River (3) Tapi River (4) Niger River

Last Answer : Colorado River

The minimum depth of building foundations on (A) Sandy soils is 80 cm to 100 cm (B) Clay soils is 90 cm to 160 cm (C) Rocky soils is 5 cm to 50 cm (D) All the above

Description : The minimum depth of building foundations on (A) Sandy soils is 80 cm to 100 cm (B) Clay soils is 90 cm to 160 cm (C) Rocky soils is 5 cm to 50 cm (D) All the above

Last Answer : Answer: Option D

Pick up the correct statement from the following: (A) The direction of the littoral drift depends upon the direction of the wave with respect to the coastline (B) The direction of a river opening to the sea determines the direction of no littoral drift (C) Harbour in the path of littoral drift is not constructed to avoid a build up of sand on one side and erosion on the other (D) all of the above

Description : Pick up the correct statement from the following: (A) The direction of the littoral drift depends upon the direction of the wave with respect to the coastline (B) The direction of a river opening to the sea ... avoid a build up of sand on one side and erosion on the other (D) all of the above

Last Answer : (D) all of the above

Which of the following instrument can be used for measuring speed of a submarine moving in deep sea? (A) Venturimeter (B) Orifice plate (C) Hot wire anemometer (D) Pitot tube

Description : Which of the following instrument can be used for measuring speed of a submarine moving in deep sea? (A) Venturimeter (B) Orifice plate (C) Hot wire anemometer (D) Pitot tube

Last Answer : Answer: Option D

Low heat cement is used in (a) Thin structures (b) Thick structures (c) Sea structures (d) Submarine structures

Description : Low heat cement is used in (a) Thin structures (b) Thick structures (c) Sea structures (d) Submarine structures

Last Answer : (b) Thick structures

Rotary drilling is the fastest method in case of (A) Rocky soils (B) Clay soils (C) Sandy soil (D) All of these

Description : Rotary drilling is the fastest method in case of (A) Rocky soils (B) Clay soils (C) Sandy soil (D) All of these

Last Answer : Answer: Option D

Why could I see an Amy Goodman interview on my laptop but only hear audio when I hooked my laptop to a digital projector?

Description : Why could I see an Amy Goodman interview on my laptop but only hear audio when I hooked my laptop to a digital projector?

Last Answer : Restart? Tell a bit more please: which computer, which port, which beamer, OS?

The technique of temporarily delaying outgoing acknowledgements so that they can be hooked onto the next outgoing data frame is called ____________ a. piggybacking b. cyclic redundancy check c. fletcher’s checksum d. parity check

Description : The technique of temporarily delaying outgoing acknowledgements so that they can be hooked onto the next outgoing data frame is called ____________ a. piggybacking b. cyclic redundancy check c. fletcher’s checksum d. parity check

Last Answer : a. piggybacking

The technique of temporarily delaying outgoing acknowledgements so that they can be hooked onto the next outgoing data frame is called ____________ A. piggybacking B. cyclic redundancy check C. fletcher’s checksum D. parity check

Description : The technique of temporarily delaying outgoing acknowledgements so that they can be hooked onto the next outgoing data frame is called ____________ A. piggybacking B. cyclic redundancy check C. fletcher’s checksum D. parity check

Last Answer : A. piggybacking

The system in which high tensile alloy steel bars (silica manganese steel) are used as prestressing tendons, is known as (A) Freyssinet system (B) Magnel-Blaton system (C) C.C.L. standard system (D) Lee-McCall system

Description : The system in which high tensile alloy steel bars (silica manganese steel) are used as prestressing tendons, is known as (A) Freyssinet system (B) Magnel-Blaton system (C) C.C.L. standard system (D) Lee-McCall system

Last Answer : Answer: Option D

Most common method of pre-stressing used for factory production is (A) Long line method (B) Freyssinet system (C) Magnel-Blaton system (D) Lee-Macall system

Description : Most common method of pre-stressing used for factory production is (A) Long line method (B) Freyssinet system (C) Magnel-Blaton system (D) Lee-Macall system

Last Answer : Answer: Option A

We say that a set of gates is logically complete if we can build any circuit without using any other kind of gates. Which of the following sets are logically complete a. set of {AND,OR} b. set of {EXOR, NOT} c. set of {AND,OR,NOT} d. None of the above

Description : We say that a set of gates is logically complete if we can build any circuit without using any other kind of gates. Which of the following sets are logically complete a. set of {AND,OR} b. set of {EXOR, NOT} c. set of {AND,OR,NOT} d. None of the above

Last Answer : c. set of {AND,OR,NOT}

How would you recommend selling large sets of collectibles online?

Description : How would you recommend selling large sets of collectibles online?

Last Answer : *recommend. My apologies.