Load cells used for the measurement of weight has (A) Compact & rugged construction with an accuracy of 0.1 to 1% (B) No moving parts and incurs negligible deflection under load (C) Provision of thermal compensation and is hermetically sealed (D) All 'a', 'b' & 'c'

Load cells used for the measurement of weight has
(A) Compact & rugged construction with an accuracy of 0.1 to 1% (B) No moving parts and incurs negligible deflection under load (C) Provision of thermal compensation and is hermetically sealed (D) All 'a', 'b' & 'c'
by

1 Answer

Answer :

(D) All 'a', 'b' & 'c'
by

Related questions

Where can I find a small, opaque, hermetically sealed jar?

Description : Where can I find a small, opaque, hermetically sealed jar?

Last Answer : Do you really mean hermetically sealed, or do you just mean stoppered?

Factory equipment allows hermetically sealed sanitary steel cans to be manufactured and later sealed at the rate of ____ units per minute. a. 500 c. 1,000 b. 1,500 d. 1,200

Description : Factory equipment allows hermetically sealed sanitary steel cans to be manufactured and later sealed at the rate of ____ units per minute. a. 500 c. 1,000 b. 1,500 d. 1,200

Last Answer : c. 1,000

A 0-10 A ammeter has a guaranteed accuracy of 1% of full scale deflection, the limiting error while reading

Description : A 0-10 A ammeter has a guaranteed accuracy of 1% of full scale deflection, the limiting error while reading 2.5 A will be (a) 1% (b) 2% (c) 4% (d) None of these 

Last Answer : A

Minimum number of bits required to represent maximum value of given analogue signal with 0.1% accuracy is:

Description :  Minimum number of bits required to represent maximum value of given analogue signal with 0.1% accuracy is: a. 8 bits b. 9 bits c. 10 bits d. 12 bits

Last Answer : 10

A 0 to 300V voltmeter has a guaranteed accuracy of 1% of full scale...

Description : A 0 to 300V voltmeter has a guaranteed accuracy of 1% of full scale reading. The voltage measured by the instrument is 83V. The percentage limiting error is

Last Answer : A 0 to 300V voltmeter has a guaranteed accuracy of 1% of full scale reading. The voltage measured by the instrument is 83V. The percentage limiting error is 4.85%.

Accumulated profits include: A. Provision for doubtful debts B. Superannuation fund C. Workmen's compensation fund. D. Provision for Tax

Description : Accumulated profits include: A. Provision for doubtful debts B. Superannuation fund C. Workmen's compensation fund. D. Provision for Tax

Last Answer : C. Workmen's compensation fund.

A milliammeter, with a full scale deflection reading of 100 milliamps, is known to have an accuracy of + or - 2%. A meter reading of 10 milliamps would indicate a line current of between _____________. A. 9.8 and 10.0 milliamperes B. 9.8 and 10.2 milliamperes C. 8.0 and 12.0 milliamperes D. 8.0 and 10.0 milliamperes

Description : A milliammeter, with a full scale deflection reading of 100 milliamps, is known to have an accuracy of + or - 2%. A meter reading of 10 milliamps would indicate a line current of between _____________. A. 9.8 ... 9.8 and 10.2 milliamperes C. 8.0 and 12.0 milliamperes D. 8.0 and 10.0 milliamperes

Last Answer : Answer: B

Offsets are measured with an accuracy of 1 in 40. If the point on the paper from both sources of error (due to angular and measurement errors) is not to exceed 0.05 cm on a scale of 1 cm = 20 m, the maximum length of offset should be limited to (A) 14.14 m (B) 28.28 m (C) 200 m (D) None of these

Description : Offsets are measured with an accuracy of 1 in 40. If the point on the paper from both sources of error (due to angular and measurement errors) is not to exceed 0.05 cm on a scale of 1 cm = 20 m, the maximum length of ... should be limited to (A) 14.14 m (B) 28.28 m (C) 200 m (D) None of these

Last Answer : (B) 28.28 m

In an experiment, the percentage of error occurred in the measurement of physical quantities A, B, C and D are 1%, 2%, 3% and 4% respectively.

Description : In an experiment, the percentage of error occurred in the measurement of physical quantities A, B, C and D are 1%, 2%, 3% and 4% respectively.

Last Answer : In an experiment, the percentage of error occurred in the measurement of physical quantities A, B, C and D are 1%, 2%, ... % (C) (3/13) % (D) 16 %

If the synchronous motor, properly synchronised to the supply is running on no load and is having negligible loss then?

Last Answer : If the synchronous motor, properly synchronised to the supply is running on no load and is having negligible loss then the stator current will be zero.

What is the provision and measurement of beard ? My beard has become a fist by the grace of God. Now my question is , how much is circumcision and how much is obligatory to keep ? And can I now lighten the size of the beards ?

Description : What is the provision and measurement of beard ? My beard has become a fist by the grace of God. Now my question is , how much is circumcision and how much is obligatory to keep ? And can I now lighten the size of the beards ?

Last Answer : Dear religious brother , beard is a great and great blessing of Allah. Considered as a symbol of Islam. Beard means masculinity , it is the identity of masculinity, the beauty of Muslim. This is one ... been kept , there will never be any reward. May Allah give you the correct understanding. Amen.

Do they make a PDA ment for rugged use?

Description : Do they make a PDA ment for rugged use?

Last Answer : A PDA is like a small handheld computer in which it would not be meant for rough use.

Are the Rugged Ridge products good for Jeeps?

Description : Are the Rugged Ridge products good for Jeeps?

Last Answer : The Rugged Ridge products are the most highly recommended products for jeeps. They are also the most commonly used. They come in various colors and are also in different materials.

Where can I buy a handheld computer that will handle rugged conditions?

Description : Where can I buy a handheld computer that will handle rugged conditions?

Last Answer : There are companies that offer handheld computers. One is trimble, here is a link to their website: www.trimble.com/Outdoor-Rugged-Computers/ and another is intermec, here is a link to their website also: www.intermec.com/.../computers/handheld_computers/index.aspx

Diesel tractors are equipped with a more rugged starting motor ofa) 6 or 12 volts b) 12 or 24 volts c) 6 or 24 volts d) 12 or 36 volts

Description : Diesel tractors are equipped with a more rugged starting motor ofa) 6 or 12 volts b) 12 or 24 volts c) 6 or 24 volts d) 12 or 36 volts

Last Answer : c) 6 or 24 volts

Which of the following complete sets do not recommend the siting of a harbor layout in that vicinity ? 1. Submarine canyon 2. Lee of an island 3. Closely located promontories 4. Indentation coves on the coastline 5. Hooked bays with not-so-rugged rocky bottom (a) 2, 3, 4 and 5 (b) 1, 4 and 5 only (c) 2, 3 and 4 only (d) 3, 4 and 5 only

Description : Which of the following complete sets do not recommend the siting of a harbor layout in that vicinity ? 1. Submarine canyon 2. Lee of an island 3. Closely located promontories 4. Indentation coves on the coastline 5. Hooked bays ... (b) 1, 4 and 5 only (c) 2, 3 and 4 only (d) 3, 4 and 5 only

Last Answer : (a) 2, 3, 4 and 5

A supercharger is used in the engines of earthmoving machines at higher altitudes because (a) The ambient atmospheric pressure is less at higher altitudes (b) Four-cycle engines depend on the suction of the engines for the supply of air (c) Two-cycle engines are not rugged enough for higher altitude (d) The ambient temperature is less as the altitude is higher

Description : A supercharger is used in the engines of earthmoving machines at higher altitudes because (a) The ambient atmospheric pressure is less at higher altitudes (b) Four-cycle engines depend on the suction ... rugged enough for higher altitude (d) The ambient temperature is less as the altitude is higher

Last Answer : (a) The ambient atmospheric pressure is less at higher altitudes

A bolometer is (A) Used for the measurement of thermal radiation (B) An element which senses optical input and delivers thermal output (C) Both (A) & (B) (D) Neither (A) nor (B)

Description : A bolometer is (A) Used for the measurement of thermal radiation (B) An element which senses optical input and delivers thermal output (C) Both (A) & (B) (D) Neither (A) nor (B)

Last Answer : (C) Both (A) & (B)

Measurement accuracy depends on what factors ?

Description : Measurement accuracy depends on what factors ?

Last Answer : The accuracy of the measurement depends on the following factors. 1. The device will not have any kind of mechanical defect , if there is a mechanical defect it will have to be diagnosed and ... the correct position to avoid parallax errors. 3. Avoid random errors and take average of more lessons.

What is the error and accuracy of measurement ?

Description : What is the error and accuracy of measurement ?

Last Answer : Error is a negative word and when we say "error in measurement", we think that the person who measured has made an error because he did not fulfill his responsibility properly. It's not that the ... test results can be given by knowing some common rules to find out the accuracy of the test results.

Accuracy of measurement is determined by 

Description : Accuracy of measurement is determined by 

Last Answer : Accuracy of measurement is determined by (A) absolute error (B) percentage error (C) human error (D) personal error

When a resistor is used as a shunt and is connected in parallel with a meter movement coil, it will provide _____________. A. a measurement of circuit resistance B. an increased accuracy of approximately 1.5 percent C. an extended meter range D. none of the above

Description : When a resistor is used as a shunt and is connected in parallel with a meter movement coil, it will provide _____________. A. a measurement of circuit resistance B. an increased accuracy of approximately 1.5 percent C. an extended meter range D. none of the above

Last Answer : Answer: C

The accuracy of measurement in chain surveying, does not depend upon (A) Length of the offset (B) Scale of the plotting (C) Importance of the features (D) General layout of the chain lines

Description : The accuracy of measurement in chain surveying, does not depend upon (A) Length of the offset (B) Scale of the plotting (C) Importance of the features (D) General layout of the chain lines

Last Answer : (D) General layout of the chain lines

One of the following statements is NOT true : (A) Accuracy expresses the correctness of measurement (B) Precision represents reproducibility of measurement (C) High degree of precision implies high degree of accuracy also (D) High degree of accuracy implies high degree of precesion also

Description : One of the following statements is NOT true : (A) Accuracy expresses the correctness of measurement (B) Precision represents reproducibility of measurement (C) High degree of precision implies high degree of accuracy also (D) High degree of accuracy implies high degree of precesion also

Last Answer : (C) High degree of precision implies high degree of accuracy also

The calibration of an HPLC detector can be evaluated by measurement of? A. Retention time B. Temperature C. Flow rate accuracy D. Intensity of the peak

Description : The calibration of an HPLC detector can be evaluated by measurement of? A. Retention time B. Temperature C. Flow rate accuracy D. Intensity of the peak

Last Answer : D. Intensity of the peak

Define: i) Accuracy ii) Precision iii) Measurement uncertainty iv) Tolerance.

Description : Define: i) Accuracy ii) Precision iii) Measurement uncertainty iv) Tolerance.

Last Answer : Accuracy is the ability of the instrument to measure the accurate value. In other words, it is the closeness of the measured value to a standard or true value.

What map unit (centimorgan) is adopted in the construction of genetic maps? (a) A unit of distance between genes on chromosomes, representing 50% cross over. (b) A unit of distance between two expressed genes, representing 10% cross over. (c) A unit of distance between two expressed genes, representing 100% cross over. (d) A unit of distance between genes on chromosomes, representing 1% cross over.

Description : What map unit (centimorgan) is adopted in the construction of genetic maps? (a) A unit of distance between genes on chromosomes, representing 50% cross over. (b) A unit of distance between two ... 100% cross over. (d) A unit of distance between genes on chromosomes, representing 1% cross over.

Last Answer : (d) A unit of distance between genes on chromosomes, representing 1% cross over.

A 150 V moving iron voltmeter of accuracy class 1.0 reads 75 V when ...

Description : A 150 V moving iron voltmeter of accuracy class 1.0 reads 75 V when used in a circuit under a standard conditions. The maximum possible percentage error in the reading is:

Last Answer : A 150 V moving iron voltmeter of accuracy class 1.0 reads 75 V when used in a circuit under a standard conditions. The maximum possible percentage error in the reading is:  2.0.

An oil fired boiler is retrofitted to fire coconut shell chips. Boiler thermal efficiency drops from 82% to 70%. What will be the percentage change in energy consumption to generate the same output a) 12% increase b) 14.6% increase c) 17.1% decrease d) 17.1% increase

Description : An oil fired boiler is retrofitted to fire coconut shell chips. Boiler thermal efficiency drops from 82% to 70%. What will be the percentage change in energy consumption to generate the same output a) 12% increase b) 14.6% increase c) 17.1% decrease d) 17.1% increase

Last Answer : d) 17.1% increase

The capacity of a spring to store energy is called the spring form coefficient. Stiffness of a spring is measured by the (A) Ability to absorb shock (B) Capacity to store energy (C) Ratio of the wire & coil diameters (D) Load to produce unit deflection

Description : The capacity of a spring to store energy is called the spring form co-efficient. Stiffness of a spring is measured by the (A) Ability to absorb shock (B) Capacity to store energy (C) Ratio of the wire & coil diameters (D) Load to produce unit deflection

Last Answer : Option D

Which of these columns incurs the lowest pressure drop? (A) Packed column (with stacked packing) (B) Packed column (with dumped packing) (C) Bubble plate column (D) Pulse column

Description : Which of these columns incurs the lowest pressure drop? (A) Packed column (with stacked packing) (B) Packed column (with dumped packing) (C) Bubble plate column (D) Pulse column

Last Answer : (A) Packed column (with stacked packing)

A packed tower compared to a plate tower for a particular mass transfer operation (A) Incurs smaller pressure drop (B) Allows installation of cooling coils (C) Is less costly when built in large sizes/diameters (D) Is more suitable, if suspended solids are present in fluid stream

Description : A packed tower compared to a plate tower for a particular mass transfer operation (A) Incurs smaller pressure drop (B) Allows installation of cooling coils (C) Is less costly when built in large sizes/diameters (D) Is more suitable, if suspended solids are present in fluid stream

Last Answer : (A) Incurs smaller pressure drop

Which of the following gas-liquid contacting devices incurs the least pressure drop for a particular duty? (A) Grid tray tower (B) Perforated tray tower (C) Wetted wall tower (D) Bubble cap tower

Description : Which of the following gas-liquid contacting devices incurs the least pressure drop for a particular duty? (A) Grid tray tower (B) Perforated tray tower (C) Wetted wall tower (D) Bubble cap tower

Last Answer : (D) Bubble cap tower

Select the wrong statement pertaining to flow of an incompressible fluid through a Venturimeter. (A) For frictionless flow, the fluid pressure entering the venturi meter will be exactly equal to that leaving the Venturimeter(B) Discharge of fluid through a Venturimeter depends upon the gagedifference irrespective of the orientation of Venturimeter(C) Venturimeter occupies less space than an orificemeter(D) Venturimeter incurs less power loss compared to an equivalentorificemeter

Description : Select the wrong statement pertaining to flow of an incompressible fluid through a Venturimeter. (A) For frictionless flow, the fluid pressure entering the venturi meter will be exactly equal ... than an orificemeter (D) Venturimeter incurs less power loss compared to an equivalent orificemeter

Last Answer : (C) Venturimeter occupies less space than an orificemeter

Out of the following flow measuring devices, which one incurs themaximum installation cost as well as pressure loss? (A) Flow nozzle (B) Venturimeter (C) Rotameter (D) Orificemeter

Description : Out of the following flow measuring devices, which one incurs themaximum installation cost as well as pressure loss? (A) Flow nozzle (B) Venturimeter (C) Rotameter (D) Orificemeter

Last Answer : (B) Venturimeter

For a given fluid flow rate, which of the following incurs maximum head loss? (A) Orificemeter (B) Venturimeter (C) Flow nozzle (D) All of them incur the same head loss

Description : For a given fluid flow rate, which of the following incurs maximum head loss? (A) Orificemeter (B) Venturimeter (C) Flow nozzle (D) All of them incur the same head loss

Last Answer : (A) Orificemeter

Pick out the wrong statement. (A) A slight haze at the top of chimney indicates good combustion in the furnace (B) A bag filter incurs very small pressure drop and is very efficient for removal of submicronic dust particles from flue gases at very high temperature (C) Electrostatic precipitator is the most efficient dust collection equipment for removal of submicronic dust particles present in flue gas (D) None of these

Description : Pick out the wrong statement. (A) A slight haze at the top of chimney indicates good combustion in the furnace (B) A bag filter incurs very small pressure drop and is very efficient for ... dust collection equipment for removal of submicronic dust particles present in flue gas (D) None of these

Last Answer : (B) A bag filter incurs very small pressure drop and is very efficient for removal of submicronic dust particles from flue gases at very high temperature

Write general provision regarding construction and maintenance of motor vehicle

Description : Write general provision regarding construction and maintenance of motor vehicle

Last Answer : The Central government may make rules regulating the construction, equipment and maintenance of motor vehicles and trailers to all or any of the following matters namely, i) The width, height, ... by vehicles, The embossment of chassis number and engine number and the date of manufacturing. 

External shunts are sometimes used with ammeters to _______. A. increase meter sensitivity B. permit shunts with larger resistances to be utilized C. prevent damage to the meter movement from heat generated by the shunt D. enable the construction of a compact meter with a virtually unlimited range

Description : External shunts are sometimes used with ammeters to _______. A. increase meter sensitivity B. permit shunts with larger resistances to be utilized C. prevent damage to the meter movement from heat generated by the shunt D. enable the construction of a compact meter with a virtually unlimited range

Last Answer : Answer: C

If the no load voltage of a certain generator is 220V and the rated load voltage is 200V, then the voltage regulation is: a. 1% b. 10% c. 20V d. 9%

Description : If the no load voltage of a certain generator is 220V and the rated load voltage is 200V, then the voltage regulation is: a. 1% b. 10% c. 20V d. 9%

Last Answer : If the no load voltage of a certain generator is 220V and the rated load voltage is 200V, then the voltage regulation is: a. 1% b. 10% c. 20V d. 9%

During short circuit test iron losses are negligible because A. The current on secondary side is negligible B. The voltage on secondary side does not vary C. The voltage applied on primary side is low D. Full-load current is not supplied to the transformer

Description : During short circuit test iron losses are negligible because A. The current on secondary side is negligible B. The voltage on secondary side does not vary C. The voltage applied on primary side is low D. Full-load current is not supplied to the transformer

Last Answer : C) the voltage applied on primary side is low

During short circuit test iron losses are negligible because A. The current on secondary side is negligible B. The voltage on secondary side does not vary C. The voltage applied on primary side is low D. Full-load current is not supplied to the transformer

Description : During short circuit test iron losses are negligible because A. The current on secondary side is negligible B. The voltage on secondary side does not vary C. The voltage applied on primary side is low D. Full-load current is not supplied to the transformer

Last Answer : C) the voltage applied on primary side is low

Chrome vanadium steels usually contain 0.8 to 1.1% Cr, 0.25 to 0.35% C and < 0.25% V. It is (A) Used for making axle & shafts of aeroplanes, automobiles and locomotives (B) Having poor fatigue resistance (C) Having poor toughness (D) Not helpful in producing cleaner steel due to oxidising action of vanadium

Description : Chrome vanadium steels usually contain 0.8 to 1.1% Cr, 0.25 to 0.35% C and < 0.25% V. It is (A) Used for making axle & shafts of aeroplanes, automobiles and locomotives (B) ... resistance (C) Having poor toughness (D) Not helpful in producing cleaner steel due to oxidising action of vanadium

Last Answer : (A) Used for making axle & shafts of aeroplanes, automobiles and locomotives

To obtain integrated form of Clausius-Clapeyron equation, ln (P2/P1) = (∆HV/R) (1/T1- 1/T2) from the exact Clapeyron equation, it is assumed that the (A) Volume of the liquid phase is negligible compared to that of vapour phase (B) Vapour phase behaves as an ideal gas (C) Heat of vaporisation is independent of temperature (D) All (A), (B) & (C)

Description : To obtain integrated form of Clausius-Clapeyron equation, ln (P2/P1) = (∆HV/R) (1/T1- 1/T2) from the exact Clapeyron equation, it is assumed that the (A) Volume of the liquid phase is negligible compared to ... gas (C) Heat of vaporisation is independent of temperature (D) All (A), (B) & (C)

Last Answer : (D) All (A), (B) & (C)

Which of the following is Clausius-Clapeyron Equation for vaporisation of an ideal gas under the condition that the molar volume of liquid is negligible compared to that of the vapor? (A) d ln p/dt = Hvap/RT2 (B) d ln p/dt = RT2/Hvap (C) dp/dt = RT2/Hvap (D) dp/dt = Hvap/RT2

Description : Which of the following is Clausius-Clapeyron Equation for vaporisation of an ideal gas under the condition that the molar volume of liquid is negligible compared to that of the vapor? (A) d ln p/dt = Hvap/RT2 (B) d ln p/dt = RT2/Hvap (C) dp/dt = RT2/Hvap (D) dp/dt = Hvap/RT2

Last Answer : (A) d ln p/dt = Hvap/RT2

If a compact car and an SUV were both moving at 50 mphwhich would have the greater momentum?

Description : If a compact car and an SUV were both moving at 50 mphwhich would have the greater momentum?

Last Answer : Whichever has the greater mass.

Find the potential difference between the points A and B in the circuit shown in Fig. 4.66. Internal resistances of the cells are negligible.

Description : Find the potential difference between the points A and B in the circuit shown in Fig. 4.66. Internal resistances of the cells are negligible.

Last Answer : Find the potential difference between the points A and B in the circuit shown in Fig. 4.66. Internal resistances of the cells are negligible.

In the circuit shown the cells `A` and `B` have negligible resistance. For `V_(A) = 12 V, R_(1) = 500 Omega` and `R = 100 Omega`, the galvanometer `(G

Description : In the circuit shown the cells `A` and `B` have negligible resistance. For `V_(A) = 12 V, R_(1) = 500 Omega` and `R = 100 Omega`, the galvanometer `(G

Last Answer : In the circuit shown the cells `A` and `B` have negligible resistance. For `V_(A) = 12 V, R_(1) = 500 Omega` and ` ... A. 4 V B. 2 V C. 12 V D. 6 V

Fing the reading of the ideal ammeter connected in the given circuit. Assume that the cells have negligible internal resistance.

Description : Fing the reading of the ideal ammeter connected in the given circuit. Assume that the cells have negligible internal resistance.

Last Answer : Fing the reading of the ideal ammeter connected in the given circuit. Assume that the cells have negligible internal ... 25A` C. `1.95A` D. `1.0A`

Accurate measurement of deflection angles with a transit not properly adjusted may be made by (A) Setting the Vernier A at zero at back station and then plunging the telescope (B) Setting the Vernier A at zero at back station and turning the instrument to the forward station (C) Taking two back sights one with the telescope normal and the other with telescope inverted (D) None of these

Description : Accurate measurement of deflection angles with a transit not properly adjusted may be made by (A) Setting the Vernier A at zero at back station and then plunging the telescope (B) Setting the ... back sights one with the telescope normal and the other with telescope inverted (D) None of these

Last Answer : (C) Taking two back sights one with the telescope normal and the other with telescope inverted