The unit of length in S.I. units is  (a) meter  (b) centimeter  (c) kilometer  (d) millimeter.

The unit of length in S.I. units is
 (a) meter
 (b) centimeter
 (c) kilometer
 (d) millimeter.
by

1 Answer

Answer :

Answer : a
by

Related questions

The unit of power in S.I. units is  (a) newton  (b) pascal  (c) erg  (d) watt  (e) joule.

Description : The unit of power in S.I. units is  (a) newton  (b) pascal  (c) erg  (d) watt  (e) joule.

Last Answer : Answer : d

The unit of pressure in S.I. units is  (a) kg/cm2  (b) mm of water column  (c) pascal  (d) dynes per square cm  (e) bars

Description : The unit of pressure in S.I. units is  (a) kg/cm2  (b) mm of water column  (c) pascal  (d) dynes per square cm  (e) bars

Last Answer : Answer : c

The unit of energy in S.I. units is  (a) watt  (b) joule  (c) joule/s  (d) joule/m  (e) joule m.

Description : The unit of energy in S.I. units is  (a) watt  (b) joule  (c) joule/s  (d) joule/m  (e) joule m.

Last Answer : Answer : b

The unit of time in S.I. units is  (a) second  (b) minute  (c) hour  (d) day  (e) year

Description : The unit of time in S.I. units is  (a) second  (b) minute  (c) hour  (d) day  (e) year

Last Answer : Answer : a

The unit of mass in S.I. units is  (a) kilogram  (b) gram  (c) tonne  (d) quintal  (e) newton

Description : The unit of mass in S.I. units is  (a) kilogram  (b) gram  (c) tonne  (d) quintal  (e) newton

Last Answer : Answer : a

The unit of temperature in S.I. units is  (a) Centigrade  (b) Celsius  (c) Fahrenheit  (d) Kelvin  (e) Rankine.

Description : The unit of temperature in S.I. units is  (a) Centigrade  (b) Celsius  (c) Fahrenheit  (d) Kelvin  (e) Rankine.

Last Answer : Answer : d

Water flow to a terminal 3 mm diameter and has an average speed of 2 m/s. What is the rate of flow in cubic meter/mm?  a. 0.0001m³/min  b. 0.076 m³/min  c. 0.085 m³/min  d. 0.097 m³/min

Description : Water flow to a terminal 3 mm diameter and has an average speed of 2 m/s. What is the rate of flow in cubic meter/mm?  a. 0.0001m³/min  b. 0.076 m³/min  c. 0.085 m³/min  d. 0.097 m³/min

Last Answer : 0.085 m³/min

A bayabas falls from a branch 5m above the ground with what speed in meter per second does it strike the ground assume g = 10m/s².  a. 11m/s  b. 12m/s  c. 13m/s  d. 10m/s ∫KE = mV2/2gc

Description : A bayabas falls from a branch 5m above the ground with what speed in meter per second does it strike the ground assume g = 10m/s².  a. 11m/s  b. 12m/s  c. 13m/s  d. 10m/s ∫KE = mV2/2gc

Last Answer : 10m/s

The value of gas constant (R) in S. I. units is  A. 0.287 J/kgK  B. 2.87 J/kgK  C. 28.7 J/kgK  D. 287 J/kgK

Description : The value of gas constant (R) in S. I. units is  A. 0.287 J/kgK  B. 2.87 J/kgK  C. 28.7 J/kgK  D. 287 J/kgK

Last Answer : Answer: D

The value of the product of molecular weight and the gas characteristic constant for all the gases in S.I. units is  (a) 29.27 J/kmol°K  (b) 83.14J/kmol°K  (c) 848J/kmol°K  (d) All J/kmol °K  (e) 735 J/kmol °K.

Description : The value of the product of molecular weight and the gas characteristic constant for all the gases in S.I. units is  (a) 29.27 J/kmol°K  (b) 83.14J/kmol°K  (c) 848J/kmol°K  (d) All J/kmol °K  (e) 735 J/kmol °K.

Last Answer : Answer : b

The force per unit length across such a line in the surface is called _________.  a. force per length  b. surface tension  c. Pressure  d. Density

Description : The force per unit length across such a line in the surface is called _________.  a. force per length  b. surface tension  c. Pressure  d. Density

Last Answer : surface tension

A vessel with a volume of cubic meter contains liquid water and water vapor ion equilibrium at 600 kPa. The liquid water has mass of1kg. Using the steam table, calculate the mass of the water vapor.  A. 0.99kg  B. 1.57 kg  C. 2.54 kg  D. 3.16 kg Formula: from the steam table at 600kPa vƒ = 0.001101 m^3 / kg vg = 0.3157 m^3 / kg Vtot = mƒ vƒ + mg vg mg = (tot-mƒ vƒ) / vg

Description : A vessel with a volume of cubic meter contains liquid water and water vapor ion equilibrium at 600 kPa. The liquid water has mass of1kg. Using the steam table, calculate the mass of the water vapor.  A. 0.99kg  B. 1.57 kg  C ... / kg vg = 0.3157 m^3 / kg Vtot = mƒ vƒ + mg vg mg = (tot-mƒ vƒ) / vg

Last Answer : 3.16 kg

What is the amount of radiant energy received each second over each square meter that is at right angles to the sun’s rays at the top of the atmosphere?  a. 1400 J  b. 6000 J  c. 10000 J  d. 800 J

Description : What is the amount of radiant energy received each second over each square meter that is at right angles to the sun’s rays at the top of the atmosphere?  a. 1400 J  b. 6000 J  c. 10000 J  d. 800 J

Last Answer : 1400 J

Entropy is measured in ______.  A. Joule/Kelvin  B. Joule-Meter/Kelvin  C. Meter/Kelvin  D. Newton/Kelvin

Description : Entropy is measured in ______.  A. Joule/Kelvin  B. Joule-Meter/Kelvin  C. Meter/Kelvin  D. Newton/Kelvin

Last Answer : Joule/Kelvin

The value of the product of molecular weight and the gas characteristic constant for all the gases in M.K.S. unit is  (a) 29.27 kgfm/mol°K  (b) 8314kgfm/mol°K  (c) 848kgfm/mol°K  (d) 427kgfm/mol°K  (e) 735 kgfm/mol°K.

Description : The value of the product of molecular weight and the gas characteristic constant for all the gases in M.K.S. unit is  (a) 29.27 kgfm/mol°K  (b) 8314kgfm/mol°K  (c) 848kgfm/mol°K  (d) 427kgfm/mol°K  (e) 735 kgfm/mol°K.

Last Answer : Answer : c

Which is the longest? w) a kilometer x) a centimeter y) a dekameter z) a terameter

Description : Which is the longest? w) a kilometer x) a centimeter y) a dekameter z) a terameter 

Last Answer : ANSWER: Z -- A TERAMETER

A 50 millimeter focal length camera lens photographs a 4 meter tall tree at a distance of 20 meters. How tall is the image of the tree?

Description : A 50 millimeter focal length camera lens photographs a 4 meter tall tree at a distance of 20 meters. How tall is the image of the tree?

Last Answer : ANSWER: 10 MILLIMETERS

Give a reading as the length of some liquid column: water, alcohol, etc.  a. Banometer  b. Nanometer  c. Thermometer  d. Manometer

Description : Give a reading as the length of some liquid column: water, alcohol, etc.  a. Banometer  b. Nanometer  c. Thermometer  d. Manometer

Last Answer : Manometer

How much will the length of a 1.0 km section of concrete highway change if the temperature varies from -15˚C in winter to 41˚C in summer?  a. 0.67 m  b. 2.2 m  c. 3.1 m  d. 0.47 m

Description : How much will the length of a 1.0 km section of concrete highway change if the temperature varies from -15˚C in winter to 41˚C in summer?  a. 0.67 m  b. 2.2 m  c. 3.1 m  d. 0.47 m

Last Answer : 0.67 m

The rate at which this is quantity passes through a fixed boundary per unit time  a. Flux  b. Existence  c. Irradiance  d. All of these

Description : The rate at which this is quantity passes through a fixed boundary per unit time  a. Flux  b. Existence  c. Irradiance  d. All of these

Last Answer : All of these

It is an energy flux, equal to the rate of energy flow per unit area per unit time across some surface.  a. Irradiance  b. Radiant Intensity  c. Luminosity  d. Brightness

Description : It is an energy flux, equal to the rate of energy flow per unit area per unit time across some surface.  a. Irradiance  b. Radiant Intensity  c. Luminosity  d. Brightness

Last Answer : Luminosity

The heat absorbed by a unit mass of a material at its holding point in order to convert the material into a gas at the same temperature.  a. Latent Heat of Sublimation  b. Latent Heat of Vaporization  c. Latent Heat of Fusion  d. Latent Heat Of Condensation

Description : The heat absorbed by a unit mass of a material at its holding point in order to convert the material into a gas at the same temperature.  a. Latent Heat of Sublimation  b. Latent Heat of Vaporization  c. Latent Heat of Fusion  d. Latent Heat Of Condensation

Last Answer : Latent Heat of Vaporization

_________ is the unit of pressure and stress.  a) Newton  b) Pascal  c) Hertz  d) Joule

Description : _________ is the unit of pressure and stress.  a) Newton  b) Pascal  c) Hertz  d) Joule

Last Answer : Pascal

__________ is the unit of force.  a) Newton  b) Pascal  c) Hertz  d) Joule

Description : __________ is the unit of force.  a) Newton  b) Pascal  c) Hertz  d) Joule

Last Answer : Newton

_____________ is the base unit of thermodynamics temperature.  a) Celsius  b) Fahrenheit  c) Kelvin  d) None of the above

Description : _____________ is the base unit of thermodynamics temperature.  a) Celsius  b) Fahrenheit  c) Kelvin  d) None of the above

Last Answer : Kelvin

Is the force of gravity on unit volume?  a. Specific Weight  b. Specific Heat  c. Specific Pressure  d. Specific Volume

Description : Is the force of gravity on unit volume?  a. Specific Weight  b. Specific Heat  c. Specific Pressure  d. Specific Volume

Last Answer : Specific Weight

The SI unit of pressure  a. Pa  b. N  c. J  d. None of the above

Description : The SI unit of pressure  a. Pa  b. N  c. J  d. None of the above

Last Answer : Pa

The SI unit of mass  a. kg  b. g  c. N  d. None of the above

Description : The SI unit of mass  a. kg  b. g  c. N  d. None of the above

Last Answer : kg

Specific heat capacity in SI unit.  a. kJ / kg.k  b. kJ / kg  c. kN / kg  d. None of the above

Description : Specific heat capacity in SI unit.  a. kJ / kg.k  b. kJ / kg  c. kN / kg  d. None of the above

Last Answer : kJ / kg.k

A unit of pressure used in high vacuum technology, which is equal to 1mmhg.  a. specific heat  b. isometric  c. isobaric  d. torr

Description : A unit of pressure used in high vacuum technology, which is equal to 1mmhg.  a. specific heat  b. isometric  c. isobaric  d. torr

Last Answer : torr

The heat per unit mass per degree change in temperature  a. specific heat  b. isometric  c. conservation of energy  d. none of the above

Description : The heat per unit mass per degree change in temperature  a. specific heat  b. isometric  c. conservation of energy  d. none of the above

Last Answer : specific heat

Mass (not weight) per unit volume  a. Specific Weight  b. Specific Volume  c. Density  d. None of the above

Description : Mass (not weight) per unit volume  a. Specific Weight  b. Specific Volume  c. Density  d. None of the above

Last Answer : Density

The heat Q per unit mass per degree change in temperature that must be supplied or removed to change the temperature of a substance.  a. Specific Heat Capacity  b. Latent Heat  c. Heat of Transformation  d. Internal Heat

Description : The heat Q per unit mass per degree change in temperature that must be supplied or removed to change the temperature of a substance.  a. Specific Heat Capacity  b. Latent Heat  c. Heat of Transformation  d. Internal Heat

Last Answer : Specific Heat Capacity

What is the Si unit for temperature?  a. Kelvin  b. Celsius  c. Fahrenheit  d. Rankine

Description : What is the Si unit for temperature?  a. Kelvin  b. Celsius  c. Fahrenheit  d. Rankine

Last Answer : Kelvin

What refers to the rate of thermal radiation emitter per unit area of a body?  A. Thermal conductivity  B. Absorptivity  C. Emissivity  D. Emissive power

Description : What refers to the rate of thermal radiation emitter per unit area of a body?  A. Thermal conductivity  B. Absorptivity  C. Emissivity  D. Emissive power

Last Answer : Emissive power

What is the SI unit of specific heat capacity?  A. J/kg  B. J/kg °F ∙  C. J/kg °C ∙  D. J/°C

Description : What is the SI unit of specific heat capacity?  A. J/kg  B. J/kg °F ∙  C. J/kg °C ∙  D. J/°C

Last Answer : J/kg °C

The ______ of a substance is the amount of heat that must be added or removed from a unit mass of the substance to change its temperature by one degree.  A. Latent heat of fusion  B. Molar heat  C. Specific heat capacity  D. Specific heat

Description : The ______ of a substance is the amount of heat that must be added or removed from a unit mass of the substance to change its temperature by one degree.  A. Latent heat of fusion  B. Molar heat  C. Specific heat capacity  D. Specific heat

Last Answer : Specific heat capacity

What is defined as the energy required to raise the temperature of a unit mass of a substance by one degree?  A. Latent heat of fusion  B. Molar heat  C. Specific heat capacity  D. Specific heat

Description : What is defined as the energy required to raise the temperature of a unit mass of a substance by one degree?  A. Latent heat of fusion  B. Molar heat  C. Specific heat capacity  D. Specific heat

Last Answer : Specific heat

1 British thermal unit (BTU) is equivalent to how many joules?  A. 1016  B. 1043  C. 1023  D. 1054

Description : 1 British thermal unit (BTU) is equivalent to how many joules?  A. 1016  B. 1043  C. 1023  D. 1054

Last Answer : 1054

What is the SI unit of energy?  A. Newton  B. Btu  C. Calorie  D. Joule

Description : What is the SI unit of energy?  A. Newton  B. Btu  C. Calorie  D. Joule

Last Answer : Joule

What is the SI unit of pressure?  A. Atm  B. Bar  C. Pa  D. Psi

Description : What is the SI unit of pressure?  A. Atm  B. Bar  C. Pa  D. Psi

Last Answer : Pa

The unit “pascal” is equivalent to ______.  A. N/m^2  B. N/m  C. N-m  D. N-m^2

Description : The unit “pascal” is equivalent to ______.  A. N/m^2  B. N/m  C. N-m  D. N-m^2

Last Answer : N/m^2

What is defined as the force per unit area?  A. Pressure  B. Energy  C. Work  D. Power

Description : What is defined as the force per unit area?  A. Pressure  B. Energy  C. Work  D. Power

Last Answer : Pressure

What is the unit of the total energy of the system?  A. Kj  B. Kj/Kg  C. Kg  D. g

Description : What is the unit of the total energy of the system?  A. Kj  B. Kj/Kg  C. Kg  D. g

Last Answer : Kj

Extensive properties per unit mass are called _____.  A. Specific properties  B. Relative properties  C. Unit properties  D. Phase properties

Description : Extensive properties per unit mass are called _____.  A. Specific properties  B. Relative properties  C. Unit properties  D. Phase properties

Last Answer : Specific properties

The specific heat at constant volume is  A. the amount of heat required to raise the temperature of unit mass of gas through one degree, at constant pressure  B. the amount of heat required to raise the temperature of unit mass of gas through one degree, at constant volume  C. the amount of heat required to raise the temperature of 1 kg of water through one degree  D. any one of the above

Description : The specific heat at constant volume is  A. the amount of heat required to raise the temperature of unit mass of gas through one degree, at constant pressure  B. the amount of heat required to raise ... to raise the temperature of 1 kg of water through one degree  D. any one of the above

Last Answer : Answer: B

The pressure exerted by an ideal gas is __________ of the kinetic energy of all the molecules contained in a unit volume of gas.  A.one-half  B.one-third  C.two-third  D.three-fourth

Description : The pressure exerted by an ideal gas is __________ of the kinetic energy of all the molecules contained in a unit volume of gas.  A.one-half  B.one-third  C.two-third  D.three-fourth

Last Answer : Answer: C

The amount of heat required to raise the temperature of the unit mass of gas through one degree at constant volume, is called  A.specific heat at constant volume  B.specific heat at constant pressure  C.kilo Joule  D.none of these

Description : The amount of heat required to raise the temperature of the unit mass of gas through one degree at constant volume, is called  A.specific heat at constant volume  B.specific heat at constant pressure  C.kilo Joule  D.none of these

Last Answer : Answer: A

The pressure’of a gas in terms of its mean kinetic energy per unit volume E is equal to  (a) E/3  (b) E/2  (c) 3E/4  (d)2E/3  (e) 5E/4.

Description : The pressure’of a gas in terms of its mean kinetic energy per unit volume E is equal to  (a) E/3  (b) E/2  (c) 3E/4  (d)2E/3  (e) 5E/4.

Last Answer : Answer : d

Calculate the power output in horsepower of an 80-kg man that climbs a flight of stairs 3.8 m high in 4.0 s.  a) 744.8 hp  b) 0.998 hp  c) 746 hp  d) 1.998 hp Formula: Power = Fd/t = mgh/t F = W = mg d = h

Description : Calculate the power output in horsepower of an 80-kg man that climbs a flight of stairs 3.8 m high in 4.0 s.  a) 744.8 hp  b) 0.998 hp  c) 746 hp  d) 1.998 hp Formula: Power = Fd/t = mgh/t F = W = mg d = h

Last Answer : 0.998 hp