Water flow to a terminal 3 mm diameter and has an average speed of 2 m/s. What is the rate of flow in cubic meter/mm?  a. 0.0001m³/min  b. 0.076 m³/min  c. 0.085 m³/min  d. 0.097 m³/min

Water flow to a terminal 3 mm
diameter and has an average speed of 2
m/s. What is the rate of flow in cubic
meter/mm?
 a. 0.0001m³/min
 b. 0.076 m³/min
 c. 0.085 m³/min
 d. 0.097 m³/min
by

1 Answer

Answer :

0.085 m³/min
by

Related questions

A certain fluid is flowing in a 0.5m x 0.3 channel at the rate of 3 m/s and has a specific volume of 0.012 m³/kg. Determined the mass of water flowing in kg/s.  a. 267 kg/s  b. 378 kg/s  c. 375 kg/s  d. 456.5 kg/s m = Aν/V

Description : A certain fluid is flowing in a 0.5m x 0.3 channel at the rate of 3 m/s and has a specific volume of 0.012 m³/kg. Determined the mass of water flowing in kg/s.  a. 267 kg/s  b. 378 kg/s  c. 375 kg/s  d. 456.5 kg/s m = Aν/V

Last Answer : 375 kg/s

A vessel with a volume of cubic meter contains liquid water and water vapor ion equilibrium at 600 kPa. The liquid water has mass of1kg. Using the steam table, calculate the mass of the water vapor.  A. 0.99kg  B. 1.57 kg  C. 2.54 kg  D. 3.16 kg Formula: from the steam table at 600kPa vƒ = 0.001101 m^3 / kg vg = 0.3157 m^3 / kg Vtot = mƒ vƒ + mg vg mg = (tot-mƒ vƒ) / vg

Description : A vessel with a volume of cubic meter contains liquid water and water vapor ion equilibrium at 600 kPa. The liquid water has mass of1kg. Using the steam table, calculate the mass of the water vapor.  A. 0.99kg  B. 1.57 kg  C ... / kg vg = 0.3157 m^3 / kg Vtot = mƒ vƒ + mg vg mg = (tot-mƒ vƒ) / vg

Last Answer : 3.16 kg

The pressure gauge on a 2000 m³ tank of oxygen gas reads 600 kPa. How much volumes will the oxygen occupied at pressure of the outside air 100 kPa?  a) 14026.5 m³  b) 15026.5 m³  c) 13026.5 m³  d) 16026.5 m³ Formula: P1V1/T1 =P2V2/T2

Description : The pressure gauge on a 2000 m³ tank of oxygen gas reads 600 kPa. How much volumes will the oxygen occupied at pressure of the outside air 100 kPa?  a) 14026.5 m³  b) 15026.5 m³  c) 13026.5 m³  d) 16026.5 m³ Formula: P1V1/T1 =P2V2/T2

Last Answer : 14026.5 m³

Water is flowing through a 1 foot diameter pipe at the rate of 10ft/sec. What is the volume flow rate of water in ft³/sec?  a. 7.85  b. 6.85  c. 8.85  d. 5.85 V = Aν

Description : Water is flowing through a 1 foot diameter pipe at the rate of 10ft/sec. What is the volume flow rate of water in ft³/sec?  a. 7.85  b. 6.85  c. 8.85  d. 5.85 V = Aν

Last Answer : 7.85

Calculate: a. Mass flow rate in lb/hr. b. The velocity at section 2 in fps  a. 800,000lb/hr;625ft/s  b. 900,000lb/hr;625 ft/s  c. 888,000lb/hr;269 ft/s  d. 700,000lb/hr;269 ft/s m = A1V!/V1

Description : Calculate: a. Mass flow rate in lb/hr. b. The velocity at section 2 in fps  a. 800,000lb/hr;625ft/s  b. 900,000lb/hr;625 ft/s  c. 888,000lb/hr;269 ft/s  d. 700,000lb/hr;269 ft/s m = A1V!/V1

Last Answer : 900,000 lb/hr;625 ft/s

A bayabas falls from a branch 5m above the ground with what speed in meter per second does it strike the ground assume g = 10m/s².  a. 11m/s  b. 12m/s  c. 13m/s  d. 10m/s ∫KE = mV2/2gc

Description : A bayabas falls from a branch 5m above the ground with what speed in meter per second does it strike the ground assume g = 10m/s².  a. 11m/s  b. 12m/s  c. 13m/s  d. 10m/s ∫KE = mV2/2gc

Last Answer : 10m/s

The distribution of particle speeds in an ideal gas at a given temperature.  a. velocity of propagation  b. escape velocity  c. Maxwell speed Distribution  d. terminal velocity

Description : The distribution of particle speeds in an ideal gas at a given temperature.  a. velocity of propagation  b. escape velocity  c. Maxwell speed Distribution  d. terminal velocity

Last Answer : Maxwell speed Distribution

To displace a cubic foot of fresh water, you need _________ force.  a. 62.4 lb  b. 9.81 lb  c. 76 lb  d. 760 lb

Description : To displace a cubic foot of fresh water, you need _________ force.  a. 62.4 lb  b. 9.81 lb  c. 76 lb  d. 760 lb

Last Answer : 62.4 lb

Water flowing at a 6m/s through a 60 mm pipe is suddenly channeled into a 30 mm pipe. What is the velocity in the small pipe?  a. 34m/s  b. 24m/s  c. 15m/s  d. 27m/s

Description : Water flowing at a 6m/s through a 60 mm pipe is suddenly channeled into a 30 mm pipe. What is the velocity in the small pipe?  a. 34m/s  b. 24m/s  c. 15m/s  d. 27m/s

Last Answer : 24m/s

The unit of pressure in S.I. units is  (a) kg/cm2  (b) mm of water column  (c) pascal  (d) dynes per square cm  (e) bars

Description : The unit of pressure in S.I. units is  (a) kg/cm2  (b) mm of water column  (c) pascal  (d) dynes per square cm  (e) bars

Last Answer : Answer : c

The unit of length in S.I. units is  (a) meter  (b) centimeter  (c) kilometer  (d) millimeter.

Description : The unit of length in S.I. units is  (a) meter  (b) centimeter  (c) kilometer  (d) millimeter.

Last Answer : Answer : a

In a non-flow reversible process for which p = (- 3V+ 15) x 105N/m2,V changes from 1 m to 2 m3. The work done will be about  (a) 100 xlOO5 joules  (b) lxlO5 joules  (c) 10 xlO5 joules  (d) 10 xlO5 kilo joules  (e) 10xl04ki\ojoules.

Description : In a non-flow reversible process for which p = (- 3V+ 15) x 105N/m2,V changes from 1 m to 2 m3. The work done will be about  (a) 100 xlOO5 joules  (b) lxlO5 joules  (c) 10 xlO5 joules  (d) 10 xlO5 kilo joules  (e) 10xl04ki\ojoules.

Last Answer : Answer : c

Water (specific heat cv= 4.2 kJ/ kg ∙ K ) is being heated by a 1500 W h eater. What is the rate of change in temperature of 1kg of the water?  A. 0.043 K/s  B. 0.179 K/s  C. 0.357 K/s  D. 1.50 K/s Formula: Q = mcv ( T)

Description : Water (specific heat cv= 4.2 kJ/ kg ∙ K ) is being heated by a 1500 W h eater. What is the rate of change in temperature of 1kg of the water?  A. 0.043 K/s  B. 0.179 K/s  C. 0.357 K/s  D. 1.50 K/s Formula: Q = mcv ( T)

Last Answer : 0.179 K/s

It is an energy flux, equal to the rate of energy flow per unit area per unit time across some surface.  a. Irradiance  b. Radiant Intensity  c. Luminosity  d. Brightness

Description : It is an energy flux, equal to the rate of energy flow per unit area per unit time across some surface.  a. Irradiance  b. Radiant Intensity  c. Luminosity  d. Brightness

Last Answer : Luminosity

Amount or volume of liquid that pass in a given limit of time  a. Flow rate  b. Volume  c. Time  d. None of the above

Description : Amount or volume of liquid that pass in a given limit of time  a. Flow rate  b. Volume  c. Time  d. None of the above

Last Answer : Flow rate

Utilizing the answer to the previous problem, estimate the overall or average increase in temperature ( ΔT) of the concrete roof from the energy absorbed from the sun during a12hour day. Assume that all of the radiation absorbed goes into heating the roof. The specific heat of concrete is about 900 J/kg, and the density is about 2,300 kg/m3 .  a. 7.9 °C  b. 8.9°C  c. 9.9°C  d. 10.9°C formula: ΔQ = m c ΔT

Description : Utilizing the answer to the previous problem, estimate the overall or average increase in temperature ( ΔT) of the concrete roof from the energy absorbed from the sun during a12hour day. Assume that all of the radiation absorbed goes into ... °C  b. 8.9°C  c. 9.9°C  d. 10.9°C formula: ΔQ = m c ΔT

Last Answer : 7.9 °C

Calculate the power output in horsepower of an 80-kg man that climbs a flight of stairs 3.8 m high in 4.0 s.  a) 744.8 hp  b) 0.998 hp  c) 746 hp  d) 1.998 hp Formula: Power = Fd/t = mgh/t F = W = mg d = h

Description : Calculate the power output in horsepower of an 80-kg man that climbs a flight of stairs 3.8 m high in 4.0 s.  a) 744.8 hp  b) 0.998 hp  c) 746 hp  d) 1.998 hp Formula: Power = Fd/t = mgh/t F = W = mg d = h

Last Answer : 0.998 hp

The value of 1 mm of Hg is equal to  A. 1.333 N/m2  B. 13.33 N/m2  C. 133.3 N/m2  D. 1333 N/m2

Description : The value of 1 mm of Hg is equal to  A. 1.333 N/m2  B. 13.33 N/m2  C. 133.3 N/m2  D. 1333 N/m2

Last Answer : Answer: C

Barometric pressure is equal to  (a) 760 mm Hg  (b) zero mm Hg  (c) 735.6 mm Hg  (d) 1 mm Hg  (e) 100mm Hg.

Description : Barometric pressure is equal to  (a) 760 mm Hg  (b) zero mm Hg  (c) 735.6 mm Hg  (d) 1 mm Hg  (e) 100mm Hg.

Last Answer : Answer : a

I kgf/cm2 is equal to  (a) 760 mm Hg  (b) zero mm Hg  (c) 735.6 mm Hg  (d) 1 mm Hg  (e) l00 mm Hg.

Description : I kgf/cm2 is equal to  (a) 760 mm Hg  (b) zero mm Hg  (c) 735.6 mm Hg  (d) 1 mm Hg  (e) l00 mm Hg.

Last Answer : Answer : c

What is the amount of radiant energy received each second over each square meter that is at right angles to the sun’s rays at the top of the atmosphere?  a. 1400 J  b. 6000 J  c. 10000 J  d. 800 J

Description : What is the amount of radiant energy received each second over each square meter that is at right angles to the sun’s rays at the top of the atmosphere?  a. 1400 J  b. 6000 J  c. 10000 J  d. 800 J

Last Answer : 1400 J

Entropy is measured in ______.  A. Joule/Kelvin  B. Joule-Meter/Kelvin  C. Meter/Kelvin  D. Newton/Kelvin

Description : Entropy is measured in ______.  A. Joule/Kelvin  B. Joule-Meter/Kelvin  C. Meter/Kelvin  D. Newton/Kelvin

Last Answer : Joule/Kelvin

A problem Drum ( 3 ft. diameter ; 6 ft. height ) is field with a fluid whose density is 50 lb/ft^3. Determine the total volume of the fluid.  A. 42.41 ft^3  B.44.35 ft^3  C.45.63 ft^3  D.41.23 ft^3 Formula: Vf = (pi d^2 h) / 4

Description : A problem Drum ( 3 ft. diameter ; 6 ft. height ) is field with a fluid whose density is 50 lb/ft^3. Determine the total volume of the fluid.  A. 42.41 ft^3  B.44.35 ft^3  C.45.63 ft^3  D.41.23 ft^3 Formula: Vf = (pi d^2 h) / 4

Last Answer : 42.41 ft^3

A fluid flows in a steady manner between two section in a flow line at section 1: A 1 = 1ft², V1 = 100fpm, volume1 of 4ft³/lb. at sec2: A2 = 2 ft², p= 0.20 lb/ft³ calculate the velocity at section 2.  a. 625 fpm  b. 567 fpm  c. 356 fpm  d. None of the above

Description : A fluid flows in a steady manner between two section in a flow line at section 1: A 1 = 1ft², V1 = 100fpm, volume1 of 4ft³/lb. at sec2: A2 = 2 ft², p= 0.20 lb/ft³ calculate the velocity at section 2.  a. 625 fpm  b. 567 fpm  c. 356 fpm  d. None of the above

Last Answer : 625 fpm

A 600kg hammer of a pile driver is lilted 2m the pilling head. What is the change of potential energy? If the hammer is realest. What will be its velocity and the instant if it sticks the pilling?  a. 10,772 N-m and 5.26m/s  b. 13,200 N-m and 5.26m/s  c. 11,772 N-m and 6.26m/s  d. 11,77 2N-m and5.26m/s ∫PE = mgo(∫Z)/gc

Description : A 600kg hammer of a pile driver is lilted 2m the pilling head. What is the change of potential energy? If the hammer is realest. What will be its velocity and the instant if it sticks the pilling?  a. 10,772 N-m and 5.26m/s ...  c. 11,772 N-m and 6.26m/s  d. 11,77 2N-m and5.26m/s ∫PE = mgo(∫Z)/gc

Last Answer : 11,772 N-m and 6.26m/s

Refer to problem # 11. Determine the force that accelerates if to 12 m/s^2. horizontally along frictionless plane.  A. 2474.23 N  B. 2574.23 N  C. 3474.23 N  D. 2374.23 N Formula : M = wk / g F = ma /k

Description : Refer to problem # 11. Determine the force that accelerates if to 12 m/s^2. horizontally along frictionless plane.  A. 2474.23 N  B. 2574.23 N  C. 3474.23 N  D. 2374.23 N Formula : M = wk / g F = ma /k

Last Answer : 2474.23 N

A system weighing 2kN. Determine the force that accelerate if to 12 m/s^2. a. vertically upward when g = 9.7 m/s^2  A. 4474.23 N  B.5484.23 N  C.4495.23 N  D.5488.23 N Formula: F = m/k (a +g)

Description : A system weighing 2kN. Determine the force that accelerate if to 12 m/s^2. a. vertically upward when g = 9.7 m/s^2  A. 4474.23 N  B.5484.23 N  C.4495.23 N  D.5488.23 N Formula: F = m/k (a +g)

Last Answer : 4474.23 N

One joule is equivalent to one _____.  A. Kg m/ s^2 ∙  B. Kg m^2/s^2 ∙  C. Kg m^2/s ∙  D. Kg m/s

Description : One joule is equivalent to one _____.  A. Kg m/ s^2 ∙  B. Kg m^2/s^2 ∙  C. Kg m^2/s ∙  D. Kg m/s

Last Answer : Kg m^2/s^2

The value of the product of molecular weight and the gas characteristic constant for all the gases in M.K.S. unit is  (a) 29.27 kgfm/mol°K  (b) 8314kgfm/mol°K  (c) 848kgfm/mol°K  (d) 427kgfm/mol°K  (e) 735 kgfm/mol°K.

Description : The value of the product of molecular weight and the gas characteristic constant for all the gases in M.K.S. unit is  (a) 29.27 kgfm/mol°K  (b) 8314kgfm/mol°K  (c) 848kgfm/mol°K  (d) 427kgfm/mol°K  (e) 735 kgfm/mol°K.

Last Answer : Answer : c

The unit of energy in S.I. units is  (a) watt  (b) joule  (c) joule/s  (d) joule/m  (e) joule m.

Description : The unit of energy in S.I. units is  (a) watt  (b) joule  (c) joule/s  (d) joule/m  (e) joule m.

Last Answer : Answer : b

A 10m^3 vessel initially contains 5 m^3 of liquid water and 5 m^3 of saturated water vapor at 100 kPa. Calculate the internal energy of the system using the steam table.  A. 5 x10^5 kJ  B. 8x10^5 kJ  C. 1 x10^6 kJ  D. 2 x10^6 kJ Formula: fromthe steamtable vƒ = 0.001043 m^3 / kg vg = 1.6940 m^3 / kg u ƒ= 417.3 kJ/kg ug= 2506kJ/kg formula: Mvap = V vap/vg M liq = Vliq/ vƒ u =uƒM liq + ug M vap

Description : A 10m^3 vessel initially contains 5 m^3 of liquid water and 5 m^3 of saturated water vapor at 100 kPa. Calculate the internal energy of the system using the steam table.  A. 5 x10^5 kJ  B. 8x10^5 kJ  C. 1 ... 3 kJ/kg ug= 2506kJ/kg formula: Mvap = V vap/vg M liq = Vliq/ vƒ u =uƒM liq + ug M vap

Last Answer : 2 x10^6 kJ

In the above problem, compute for the mass. (Formula: m = p1V1 / RT1)  a. 0.2148 lb  b. 0.2134 lb  c. 0.1248 lb  d. None of the above

Description : In the above problem, compute for the mass. (Formula: m = p1V1 / RT1)  a. 0.2148 lb  b. 0.2134 lb  c. 0.1248 lb  d. None of the above

Last Answer : 0.2148 lb

Gas is enclosed in a cylinder with a weighted piston as the stop boundary. The gas is heated and expands from a volume of 0.04 m^3 to 0.10 m^3 at a constant pressure of 200kPa.Calculate the work done by the system.  A. 8 kJ  B. 10 kJ  C.12 kJ  D.14 kJ Formula: W = p(V2-V1)

Description : Gas is enclosed in a cylinder with a weighted piston as the stop boundary. The gas is heated and expands from a volume of 0.04 m^3 to 0.10 m^3 at a constant pressure of 200kPa.Calculate the work done by the system.  A. 8 kJ  B. 10 kJ  C.12 kJ  D.14 kJ Formula: W = p(V2-V1)

Last Answer : 12 kJ

Find the pressure due to a column of mercury 74.0 cm high.  a. 91.80 x 10^3 N/m^2  b. 73.56 x 10^2 N/m^2  c. 9.86 x 10^4 N/m^2  d. 87.2 x 10^4 N/m^2

Description : Find the pressure due to a column of mercury 74.0 cm high.  a. 91.80 x 10^3 N/m^2  b. 73.56 x 10^2 N/m^2  c. 9.86 x 10^4 N/m^2  d. 87.2 x 10^4 N/m^2

Last Answer : 9.86 x 10^4 N/m^2

Two 12 ft. sections of aluminum siding are placed end to end on the outside wall of house. How large a gap should be left between the pieces to prevent buckling if the temperature can change by 55˚C?  a. 0.21 m  b. 0.18 m  c. 0.31 in  d. 0.18 in

Description : Two 12 ft. sections of aluminum siding are placed end to end on the outside wall of house. How large a gap should be left between the pieces to prevent buckling if the temperature can change by 55˚C?  a. 0.21 m  b. 0.18 m  c. 0.31 in  d. 0.18 in

Last Answer : 0.18 in

How much will the length of a 1.0 km section of concrete highway change if the temperature varies from -15˚C in winter to 41˚C in summer?  a. 0.67 m  b. 2.2 m  c. 3.1 m  d. 0.47 m

Description : How much will the length of a 1.0 km section of concrete highway change if the temperature varies from -15˚C in winter to 41˚C in summer?  a. 0.67 m  b. 2.2 m  c. 3.1 m  d. 0.47 m

Last Answer : 0.67 m

What refers to a system in which there is a flow of mass across its boundaries?  a. Open system  b. Closed system  c. Isolated system  d. Non-flow system

Description : What refers to a system in which there is a flow of mass across its boundaries?  a. Open system  b. Closed system  c. Isolated system  d. Non-flow system

Last Answer : Open system

What system in which there is no exchange of matter with the surrounding or mass does not cross its boundaries?  a. Open system  b. Closed system  c. Isolated system  d. Non-flow system

Description : What system in which there is no exchange of matter with the surrounding or mass does not cross its boundaries?  a. Open system  b. Closed system  c. Isolated system  d. Non-flow system

Last Answer : Closed system

What do you call a system in which there is a flow of matter through the boundary?  a. Closed system  b. Open system  c. Isolated system  d. All of these

Description : What do you call a system in which there is a flow of matter through the boundary?  a. Closed system  b. Open system  c. Isolated system  d. All of these

Last Answer : Open system

Is a steady flow process at total constant pressure through a control volume for which there is no heat?  a. Adiabatic Saturation Process  b. Dew point  c. Adiabatic Ratio  d. None of the above

Description : Is a steady flow process at total constant pressure through a control volume for which there is no heat?  a. Adiabatic Saturation Process  b. Dew point  c. Adiabatic Ratio  d. None of the above

Last Answer : Adiabatic Saturation Process

The Product of the displacement of the body and the component if the force in the direction of the displacement.  a. Nonflow Work  b. Flow Work  c. Work  d. None of the above

Description : The Product of the displacement of the body and the component if the force in the direction of the displacement.  a. Nonflow Work  b. Flow Work  c. Work  d. None of the above

Last Answer : Work

Work done in pushing a fluid across a boundary, Usually into or out of a system  a. Flow Work  b. Flow Energy  c. Both a & b  d. None of the above

Description : Work done in pushing a fluid across a boundary, Usually into or out of a system  a. Flow Work  b. Flow Energy  c. Both a & b  d. None of the above

Last Answer : Both a & b

It involves a force deforming a solid body  a. non-elastic work  b. non-flow work  c. flow work  d. elastic work

Description : It involves a force deforming a solid body  a. non-elastic work  b. non-flow work  c. flow work  d. elastic work

Last Answer : elastic work

The energy that stored in a system as a result of its position in the earth’s gravitational field  a. elastic energy  b. kinetic energy  c. potential energy  d. flow energy

Description : The energy that stored in a system as a result of its position in the earth’s gravitational field  a. elastic energy  b. kinetic energy  c. potential energy  d. flow energy

Last Answer : potential energy

The flow energy of 5 ft3 of a fluid passing a boundary to a system is 80,000 ft-lb. Determine the pressure at this point.  a. 222 psi  b. 333 psi  c. 444 psi  d. 111 psi formula: Ef= pV

Description : The flow energy of 5 ft3 of a fluid passing a boundary to a system is 80,000 ft-lb. Determine the pressure at this point.  a. 222 psi  b. 333 psi  c. 444 psi  d. 111 psi formula: Ef= pV

Last Answer : 111 psi

The flow energy of 150 L of a fluid passing a boundary to a system is 110 kJ. Determine the pressure at this point  a. 733.33 kPa  b. 833.33 kPa  c. 933.33 kPa  d. 633.33 kPa

Description : The flow energy of 150 L of a fluid passing a boundary to a system is 110 kJ. Determine the pressure at this point  a. 733.33 kPa  b. 833.33 kPa  c. 933.33 kPa  d. 633.33 kPa

Last Answer : 733.33 kPa

The flow through an open system is _________ if all properties at each point within the system remain constant with respect to time.  a. streamline flow  b. steady flow  c. constant flow  d. algebraic flow

Description : The flow through an open system is _________ if all properties at each point within the system remain constant with respect to time.  a. streamline flow  b. steady flow  c. constant flow  d. algebraic flow

Last Answer : steady flow

The process of one substance mixing with another because of molecular motion is called _________.  a. diffusion  b. viscosity  c. streamline flow  d. solution

Description : The process of one substance mixing with another because of molecular motion is called _________.  a. diffusion  b. viscosity  c. streamline flow  d. solution

Last Answer : diffusion

The statement “heat cannot by itself flow from one body into a hotter body” is governed by _________.  a. the first law of thermodynamics  b. the second law of thermodynamics  c. the third law of thermodynamics  d. the zeroth law of thermodynamics

Description : The statement “heat cannot by itself flow from one body into a hotter body” is governed by _________.  a. the first law of thermodynamics  b. the second law of thermodynamics  c. the third law of thermodynamics  d. the zeroth law of thermodynamics

Last Answer : the second law of thermodynamics

A convection process in which an external device, such as a fan, is used to produce the fluid flow.  a. Forced Convection  b. External Convection  c. Placid Convection  d. Thermionic Convection

Description : A convection process in which an external device, such as a fan, is used to produce the fluid flow.  a. Forced Convection  b. External Convection  c. Placid Convection  d. Thermionic Convection

Last Answer : Forced Convection