Description : The changing of solid directly to vapor without passing through liquid state is called a. Evaporation b. Vaporization c. Sublimation d. Condensation
Last Answer : Sublimation
Description : The heat absorbed by a unit mass of a material at its holding point in order to convert the material into a gas at the same temperature. a. Latent Heat of Sublimation b. Latent Heat of Vaporization c. Latent Heat of Fusion d. Latent Heat Of Condensation
Last Answer : Latent Heat of Vaporization
Description : _________ is the transition of a given substance from the solid to the gas phase with no intermediate liquid stage. a. Convection b. Conduction c. Radiation d. Sublimation
Description : What is the amount of heat needed to turn 1 kg of the substance at its melting point from the solid to liquid state? A. Heat of fusion B. Heat of vaporation C. Heat of condensation D. Heat of fission
Last Answer : Heat of fusion
Description : The pressure of the vapor phase of a substance that is in equilibrium with the liquid or solid phase. a. Phase Pressure b. Equilibrium Vapor Pressure c. Specific Pressure d. Equilibrium Phase Pressure
Last Answer : Equilibrium Vapor Pressure
Description : What refers to the amount of energy absorbed or released during a phase-change process? A. Molar heat B. Latent heat C. Vaporization heat D. Condensation heat
Last Answer : Latent heat
Description : The phenomenon of melting under pressure and freezing again when the pressure is reduced is known as a. sublimation b. condensation c. deposition d. regelation
Last Answer : regelation
Description : What is the amount of heat needed to turn 1kg of the substance at its boiling point from the liquid to the gaseous state? A. Heat of fusion B. Heat of vaporation C. Heat of condensation D. Heat of fission
Last Answer : Heat of vaporation
Description : Defined as the ratio of weight of dry steam to the weight of stuff. a. dryness fraction b. Vaporization c. fusion d. super heated steam
Last Answer : dryness fraction
Description : ____ is when water goes from a solid to a gas without passing through the liquid phase. a. Transfusion c. Evaporation b. Sublimation d. Condensation
Last Answer : b. Sublimation
Description : The change of a gas to a liquid is called: w) vaporization x) sublimation y) condensation z) freezing
Last Answer : ANSWER: Y -- CONDENSATION
Description : Which is NOT a correct statement? A. A superheated vapor will not condense when small amount of heat re removed B. An ideal gas is a gas that is not a superheated vapor C. A saturated ... absorb as much heat as it can without vaporizing D. Water at 1 atm and room temperature is subcooled
Last Answer : An ideal gas is a gas that is not a superheated vapor
Description : _________________ is the name given to a gaseous phase that is in contact with the liquid phase, or that is in the vicinity of a state where some of it might be condensed. a) Vapor b) Saturated Vapor c) Superheated Vapor d) Wet Vapor
Last Answer : Vapor
Description : What is the latent heat of vaporization of water at 1 atm? A. 2314.8 kJ/kg B. 2257.1 kJ/kg C. 2511.7 kJ/kg D. 2429.8 kJ/kg
Last Answer : 2257.1 kJ/kg
Description : ___________ is the percent by weight that is saturated liquid. a) Quality, x b) Percent Moisture, y c) Vapor c) Liquid
Last Answer : Percent Moisture, y
Description : ___________ is the percent by weight that is saturated vapor. a) Quality, x b) Percent Moisture, y c) Vapor d) Liquid
Last Answer : Quality, x
Description : __________________ represents the highest pressure and highest temperature at which liquid and vapor can coexist in equilibrium. a) Critical Point b) Boiling Point c) Quality Point d) None of the above
Last Answer : Critical Point
Description : _________________ is a combination of saturated vapor and saturated liquid. a) Vapor b) Saturated Vapor c) Superheated Vapor d) Wet Vapor
Last Answer : Wet Vapor
Description : A vessel with a volume of cubic meter contains liquid water and water vapor ion equilibrium at 600 kPa. The liquid water has mass of1kg. Using the steam table, calculate the mass of the water vapor. A. 0.99kg B. 1.57 kg C ... / kg vg = 0.3157 m^3 / kg Vtot = mƒ vƒ + mg vg mg = (tot-mƒ vƒ) / vg
Last Answer : 3.16 kg
Description : A 10m^3 vessel initially contains 5 m^3 of liquid water and 5 m^3 of saturated water vapor at 100 kPa. Calculate the internal energy of the system using the steam table. A. 5 x10^5 kJ B. 8x10^5 kJ C. 1 ... 3 kJ/kg ug= 2506kJ/kg formula: Mvap = V vap/vg M liq = Vliq/ vƒ u =uƒM liq + ug M vap
Last Answer : 2 x10^6 kJ
Description : What refers to the point at which the saturated liquid and saturated vapor states are the same or identical? A. Triple point B. Inflection point C. Maximum point D. Critical point
Last Answer : Maximum point
Description : What is defined as the energy required to raise the temperature of a unit mass of a substance by one degree? A. Latent heat of fusion B. Molar heat C. Specific heat capacity D. Specific heat
Last Answer : Specific heat
Description : The specific terms used in phase transitions a. melting b. evaporation c. freezing d. sublimation
Last Answer : evaporation
Description : A process in which heat energy is transferred by the flow of fluid. a. Convection b. Conduction c. Radiation d. Sublimation
Last Answer : Convection
Description : Pick out the wrong statement. (A) The controlling resistance in case of heating of air by condensing steam is in the air film (B) The log mean temperature difference (LMTD) for ... a pure fluid at a given pressure from liquid to vapor or vice-versa occurs at saturation temperature
Last Answer : (C) In case of a 1 - 2 shell and tube heat exchanger, the LMTD correction factor value increases sharply, when a temperature cross occurs
Description : When a solid melts, a. the temperature of the substance increases. b. the temperature of the substance decreases. c. heat leaves the substance. d. heat enters the substance.
Last Answer : heat enters the substance.
Description : What is the unique state at which solid, liquid and gaseous phase can go co-exist in equilibrium? a. Triple point b. Critical point c. Boiling point d. Pour point
Last Answer : Triple point
Description : Mixture of liquid and steam of the same substance in which both are at saturation temperature. a. dry steam b. current steam c. wet steam d. aerosol
Last Answer : wet steam
Description : The phase transition of a liquid to a solid a. Solidification b. Freezing c. Fusion d. All of these
Last Answer : All of these
Description : Fuels that may classified conveniently in solid, liquid and gaseous. a. Unleaded fuel b. Diesel fuel c. Fossil fuel d. All of the above
Last Answer : Fossil fuel
Description : The energy associated with individual molecules in a gas, liquid or solid. a. Specific Energy b. Molecular Energy c. Internal Energy d. Phase Energy
Last Answer : Internal Energy
Description : Liquid fuels have higher calorific value than solid fuels. A. Yes B. No
Last Answer : Answer: A
Description : Liquid fuels have lower efficiency than solid fuels. A. True B. False
Last Answer : Answer: B
Description : Which of the following statement is incorrect? A. The liquid fuels consist of hydrocarbons. B. The liquid fuels have higher calorific value than solid fuels. C. The solid fuels have higher calorific value than liquid fuels. D. A good fuel should have low ignition point.
Last Answer : Answer: C
Description : Occurs when the vapor pressure equals the atmospheric pressure a. Boiling b. Melting c. Freezing d. Vaporizing
Last Answer : Boiling
Description : A 0.064 kg of octane vapor (MW = 114) is mixed with0.91 kg of air (MW = 29.0) in the manifold of an Engine. The total pressure in the manifold is 86.1 kPa, and a temperature is 290 K. assume octane behaves ideally. What is ... of the air in the mixture in KPa? a. 46.8 b. 48.6 c. 84.6 d. 64.8
Last Answer : 84.6
Description : What is the temperature when water and vapor are in equilibrium with the atmospheric pressure? a. Ice point b. Steam point c. Critical point d. Freezing point
Last Answer : Steam point
Description : At steam point, the temperature of water and its vapor at standard pressure are: a. Extremes or maximum b. unity c. in equilibrium d. undefined
Last Answer : in equilibrium
Description : What is the temperature when water and vapor are in the equilibrium with the atmospheric pressure? a. Ice point b. Steam point c. Critical point d. Freezing point
Description : Which of the following cycle is used in vapor cycle power plant? a. Brayton cycle b. Diesel cycle c. Ericson cycle d. Rankine cycle
Last Answer : Rankine cycle
Description : _____________ is the difference between the actual temperature of superheated vapor and the saturation temperature for the existing pressure. a) Degrees of Superheat, °SH b) Degrees of Sub cooled, °SB c) Both a and b d) None of the above
Last Answer : Degrees of Superheat, °SH
Description : __________________ is a vapor having a temperature higher than the saturation temperature corresponding to the existing pressure. a) Vapor b) Saturated Vapor c) Superheated Vapor d) Wet Vapor
Last Answer : Superheated Vapor
Description : ___________________ is a vapor at the saturation conditions (saturation temperature and saturation pressure). a) Vapor b) Saturated Vapor c) Superheated Vapor d) Wet Vapor
Last Answer : Saturated Vapor
Description : Is define as the ratio of the actual pressure of the vapor a. Relative Humidity b. Humidity Ratio c. Dew Point d. Adiabatic Saturation
Last Answer : Relative Humidity
Description : Water vapor at 100 KPa and 150°C is compressed isothermally until half the vapor has condensed. How much work must be performed on the steam in this compression process per kilogram? a) -1384.7 kJ b) 1384.7 kJ c) -2384.7 kJ d) 2384.7 kJ
Last Answer : -1384.7 kJ
Description : The temperature at which the vapor pressure exactly equals one atm is called _________. a. boiling temperature b. normal boiling point c. triple point d. point of infliction
Last Answer : normal boiling point
Description : On a day when the partial pressure of water vapor remains constant, what happens as the temperature rises? a. the relative humidity increases b. the relative humidity decreases c. the relative humidity remains constant d. the air would eventually become saturated
Last Answer : the relative humidity decreases
Description : _________is the partial pressure of water vapor at the existing temperature divided by the equilibrium vapor pressure of water at the existing temperature. a. vacuum pressure b. relative humidity c. absolute pressure d. vapor pressure
Last Answer : relative humidity
Description : Vapor pressure depends only on _________. a. pressure b. force c. volume d. temperature
Last Answer : temperature
Description : Water boils when: A. Its saturated vapor pressure equals to the atmospheric pressure B. Its vapor pressure equals 76cm of mercury C. Its temperature reaches 212 degree Celsius D. Its vapor pressure is 1 gram per sq. cm
Last Answer : Its saturated vapor pressure equals to the atmospheric pressure