Pick out the wrong statement. (A) 'Hold back' is defined as the fraction of material that stays longer than the mean residence time (B) Study of non-ideal flow reactor is done experimentally by stimulus￾response technique (C) For studying a chemical reaction, it is desirable to monitor the reactants during initial stages and the products during the final stages of reaction (D) A batch reactor cannot be used to study the kinetics of catalytic reaction

Pick out the wrong statement.
(A) 'Hold back' is defined as the fraction of material that stays longer than
the mean residence time
(B) Study of non-ideal flow reactor is done experimentally by stimulus￾response technique
(C) For studying a chemical reaction, it is desirable to monitor the reactants
during initial stages and the products during the final stages of reaction
(D) A batch reactor cannot be used to study the kinetics of catalytic reaction
by

1 Answer

Answer :

(D) A batch reactor cannot be used to study the kinetics of catalytic reaction
by

Related questions

Pick out the wrong statement. (A) In a batch reactor, which is exclusively used for liquid phase reactions; temperature pressure and composition may vary with time (B) In a semi-batch reactor, one reactant is charged batch wise, while the other reactant is fed continuously (C) In a continuous flow reactor, uniform concentration cannot be maintained throughout the vessel even in a well agitated system (D) In a continuous flow reactor, both the reactants and the products flow out continuously

Description : Pick out the wrong statement. (A) In a batch reactor, which is exclusively used for liquid phase reactions; temperature pressure and composition may vary with time (B) In a semi-batch reactor, ... system (D) In a continuous flow reactor, both the reactants and the products flow out continuously

Last Answer : (C) In a continuous flow reactor, uniform concentration cannot be maintained throughout the vessel even in a well agitated system

Pick out the wrong statement: (A) Chemical reactions with high activation energy are very temperature sensitive (B) A flat velocity profile exists in a plug flow reactor (C) The residence time for all the elements of fluid in case of a P.F.R. need not be same (D) Half life of a reaction increases with increased initial concentration for reaction orders more than one

Description : Pick out the wrong statement: (A) Chemical reactions with high activation energy are very temperature sensitive (B) A flat velocity profile exists in a plug flow reactor (C) The residence ... D) Half life of a reaction increases with increased initial concentration for reaction orders more than one

Last Answer : (C) The residence time for all the elements of fluid in case of a P.F.R. need not be same

In a semi-batch reactor (A) Velocity of reaction can be controlled (B) Maximum conversion can be controlled (C) Both the reactants flow counter-currently (D) Residence time is constant

Description : In a semi-batch reactor (A) Velocity of reaction can be controlled (B) Maximum conversion can be controlled (C) Both the reactants flow counter-currently (D) Residence time is constant

Last Answer : (A) Velocity of reaction can be controlled

Pick out the wrong statement. (A) The vessel dispersion number (D/UL) for plug flow and mixed flow approaches zero and infinity respectively (B) Space time in a flow reactor is a measure of its capacity and is equal to the residence time when the density of reaction mixture is constant (C) Mixed reactor is always smaller than the plug flow reactor for all positive reaction orders for a particular duty (D) In an ideal tubular flow reactor, mixing takes place in radial direction and there is no mixing in longitudinal direction

Description : Pick out the wrong statement. (A) The vessel dispersion number (D/UL) for plug flow and mixed flow approaches zero and infinity respectively (B) Space time in a flow reactor is a ... ideal tubular flow reactor, mixing takes place in radial direction and there is no mixing in longitudinal direction

Last Answer : (C) Mixed reactor is always smaller than the plug flow reactor for all positive reaction orders for a particular duty

Pick out the wrong statement. (A) Lower boiling paraffins have higher octane number than higher paraffins (B) Dehydrogenation of naphthenes to aromatics is a desirable reaction in reforming process (C) The most ideal feedstock for thermal reforming is dearomatised kerosene (D) Catalyst used in catalytic reforming is platinum on silica-alumina base

Description : Pick out the wrong statement. (A) Lower boiling paraffins have higher octane number than higher paraffins (B) Dehydrogenation of naphthenes to aromatics is a desirable reaction in reforming ... is dearomatised kerosene (D) Catalyst used in catalytic reforming is platinum on silica-alumina base

Last Answer : (C) The most ideal feedstock for thermal reforming is dearomatised kerosene

The use of space time is preferred over the mean residence time in the design of a/an (A) Batch reactor (B) Ideal tubular-flow reactor (C) Slurry reactor (D) CSTR

Description : The use of space time is preferred over the mean residence time in the design of a/an (A) Batch reactor (B) Ideal tubular-flow reactor (C) Slurry reactor (D) CSTR

Last Answer : (B) Ideal tubular-flow reactor

Pick out the correct statement. (A) In catalytic reactions, the catalyst reacts with the reactants (B) A catalyst initiates a chemical reaction (C) A catalyst lowers the activation energy of the reacting molecules (D) A catalyst cannot be recovered chemically unchanged at the end of the chemical reaction

Description : Pick out the correct statement. (A) In catalytic reactions, the catalyst reacts with the reactants (B) A catalyst initiates a chemical reaction (C) A catalyst lowers the activation energy of ... molecules (D) A catalyst cannot be recovered chemically unchanged at the end of the chemical reaction

Last Answer : (C) A catalyst lowers the activation energy of the reacting molecules

Pick out the wrong statement. (A) Use of different catalysts in a reversible catalytic chemical reaction does not change the equilibrium composition (B) Alumina is added as a promoter to iron catalyst in ammonia synthesis reaction (C) Activation energy for a reaction is obtained from the intercept of the Arrhenius plot (D) Presence of inerts affects the equilibrium conversion of reactants in a chemical reaction

Description : Pick out the wrong statement. (A) Use of different catalysts in a reversible catalytic chemical reaction does not change the equilibrium composition (B) Alumina is added as a promoter to ... Arrhenius plot (D) Presence of inerts affects the equilibrium conversion of reactants in a chemical reaction

Last Answer : (C) Activation energy for a reaction is obtained from the intercept of the Arrhenius plot

Kinetics of a catalytic reaction can be best studied on a/an __________ reactor. (A) Mixed (B) Integral (plug flow) (C) Differential (flow) (D) Either (A), (B) and (C)

Description : Kinetics of a catalytic reaction can be best studied on a/an __________ reactor. (A) Mixed (B) Integral (plug flow) (C) Differential (flow) (D) Either (A), (B) and (C)

Last Answer : (D) Either (A), (B) and (C)

Kinetics of a solid catalysed reaction can best be studied in a __________ reactor. (A) Batch (B) Plug-flow (C) Mixed (D) None of these

Description : Kinetics of a solid catalysed reaction can best be studied in a __________ reactor. (A) Batch (B) Plug-flow (C) Mixed (D) None of these

Last Answer : (C) Mixed

In a semi-batch reactor, (A) Mixing takes place in axial direction only (B) Velocity of reaction can be controlled (C) Condition similar to plug flow reactor exists (D) Residence time is constant

Description : In a semi-batch reactor, (A) Mixing takes place in axial direction only (B) Velocity of reaction can be controlled (C) Condition similar to plug flow reactor exists (D) Residence time is constant

Last Answer : (B) Velocity of reaction can be controlled

Pick out the wrong statement. (A) For a first order consecutive reaction, a tubular flow reactor as compared to a stirred tank reactor provides higher overall selectivity(B) For an ideal mixed reactor at steady state, the exit stream has the samecomposition as fluid within the reactor and the space time is equivalent toholding time for constant density system(C) Plug flow reactor (PFR) is always smaller than mixed reactor for allpositive reaction orders for a particular duty(D) Reaction rate does not decrease appreciably as the reaction proceeds incase of an autocatalytic reaction

Description : Pick out the wrong statement. (A) For a first order consecutive reaction, a tubular flow reactor as compared to a stirred tank reactor provides higher overall selectivity(B) For an ideal ... D) Reaction rate does not decrease appreciably as the reaction proceeds in case of an autocatalytic reaction

Last Answer : (A) For a first order consecutive reaction, a tubular flow reactor as compared to a stirred tank reactor provides higher overall selectivity

A batch reactor is suitable for (A) Achieving cent percent conversion of reactants into products (B) Large scale gaseous phase reactions (C) Liquid phase reactions(D) Obtaining uniform polymerisation products in highly exothermicreactions

Description : A batch reactor is suitable for (A) Achieving cent percent conversion of reactants into products (B) Large scale gaseous phase reactions (C) Liquid phase reactions (D) Obtaining uniform polymerisation products in highly exothermic reactions

Last Answer : (C) Liquid phase reactions

. A batch reactor is characterised by (A) Constant residence time(B) Variation in extent of reaction and properties of the reaction mixture withtime(C) Variation in reactor volume(D) Very low conversion

Description : . A batch reactor is characterised by (A) Constant residence time (B) Variation in extent of reaction and properties of the reaction mixture with time (C) Variation in reactor volume (D) Very low conversion

Last Answer : (B) Variation in extent of reaction and properties of the reaction mixture with time

Pick out the wrong statement. (A) A particular chemical reaction is more temperature sensitive at low temperatures (B) A very high value of equilibrium constant, K (K >> 1) indicates that the reaction is practically irreversible in nature (C) The intercept of the Arrhenius plot is called the 'activation energy' (D) Non-ideal flow takes place in reactors due to recycling, channeling or by creation of stagnant regions

Description : Pick out the wrong statement. (A) A particular chemical reaction is more temperature sensitive at low temperatures (B) A very high value of equilibrium constant, K (K >> 1) indicates that the ... ) Non-ideal flow takes place in reactors due to recycling, channeling or by creation of stagnant regions

Last Answer : (C) The intercept of the Arrhenius plot is called the 'activation energy

The order of a chemical reaction is (A) An experimentally determined quantity (B) Always equal to the total stoichiometric number of reactants (C) Never fractional (D) None of these

Description : The order of a chemical reaction is (A) An experimentally determined quantity (B) Always equal to the total stoichiometric number of reactants (C) Never fractional (D) None of these

Last Answer : (A) An experimentally determined quantity

Pick out the correct statement. (A) If an insoluble gas is passed through a volatile liquid placed in a perfectly insulated container, the temperature of the liquid will increase (B) A process is irreversible as long as Δ S for the system is greater than zero (C) The mechanical work done by a system is always equal to∫P.dV (D) The heat of formation of a compound is defined as the heat of reaction leading to the formation of the compound from its reactants

Description : Pick out the correct statement. (A) If an insoluble gas is passed through a volatile liquid placed in a perfectly insulated container, the temperature of the liquid will increase (B) A ... compound is defined as the heat of reaction leading to the formation of the compound from its reactants

Last Answer : (D) The heat of formation of a compound is defined as the heat of reaction leading to the formation of the compound from its reactants

“The enthalpy change for any chemical reaction is independent of the intermediate stages, provided the initial and final conditions are the same for each route.” This statement is known as:

Description : “The enthalpy change for any chemical reaction is independent of the intermediate stages, provided the initial and final conditions are the same for each route.” This statement is known as:  A. Dulong’s Law  B. Dalton’s Law  C. Hess’s Law  D. Petit Law

Last Answer : Hess’s Law

Time required for 50% decomposition of a liquid in an isothermal batch reactor following first order kinetics is 2 minutes. The time required for 75% decomposition will be about __________ minutes. (A) 3 (B) 4 (C) 6 (D) 10

Description : Time required for 50% decomposition of a liquid in an isothermal batch reactor following first order kinetics is 2 minutes. The time required for 75% decomposition will be about __________ minutes. (A) 3 (B) 4 (C) 6 (D) 10

Last Answer : (B) 4

Pick out the wrong statement. (A) Exit age description function (E) and internal age distribution function (I) are related as, E = -(dI/dθ) (B) Chemisorption studies are useful in the determination of catalyst surface area and pore size distribution (C) A higher temperature favours the reaction of higher activation energy (D) A catalyst increases the potential energy barrier over which the reactants must pass to form products

Description : Pick out the wrong statement. (A) Exit age description function (E) and internal age distribution function (I) are related as, E = -(dI/dθ) (B) Chemisorption studies are useful in the ... energy (D) A catalyst increases the potential energy barrier over which the reactants must pass to form products

Last Answer : (D) A catalyst increases the potential energy barrier over which the reactants must pass to form products

For a packed bed reactor; the presence of a long tail in the residence time distribution curve is an indication of: (A) Ideal plug flow (B) Bypass (C) Dead zone (D) Channelling

Description : For a packed bed reactor; the presence of a long tail in the residence time distribution curve is an indication of: (A) Ideal plug flow (B) Bypass (C) Dead zone (D) Channelling

Last Answer : (C) Dead zone

For a zero order chemical reaction, the (A) Half life period is directly proportion to the initial concentration of the reactants (B) Plot of products concentration with time is a straight line through the origin (C) Products concentration increases linearly with time (D) All (A), (B) and (C)

Description : For a zero order chemical reaction, the (A) Half life period is directly proportion to the initial concentration of the reactants (B) Plot of products concentration with time is a straight line through the origin (C) Products concentration increases linearly with time (D) All (A), (B) and (C)

Last Answer : (D) All (A), (B) and (C)

Pick out the wrong statement. (A) ****, *** & Vodka are prepared by the formulation of fruit juice, sugar beet & rye respectively (B) Protein catalysts are called enzymes (C) The rate of chemical reaction is independent of the concentration of reactants at high concentration of enzymes (D) Total sugar content in molasses is about 10%

Description : Pick out the wrong statement. (A) Wine, rum & Vodka are prepared by the formulation of fruit juice, sugar beet & rye respectively (B) Protein catalysts are called enzymes (C) The rate ... concentration of reactants at high concentration of enzymes (D) Total sugar content in molasses is about 10%

Last Answer : (D) Total sugar content in molasses is about 10%

Pick out the correct statement. (A) Higher hold up of the solid in the rotary dryer results in better exposure of the solids to the gas (B) The 'Hatta number' is important in problems involving gas absorption without chemical reaction (C) For a non-reacting binary mixture of ideal gases, the partial pressure distribution of both components is linear in the case of steady state equimolal counter-diffusion (D) Total reflux in case of distillation operation requires infinite number of plates for a binary system separation

Description : Pick out the correct statement. (A) Higher hold up of the solid in the rotary dryer results in better exposure of the solids to the gas (B) The 'Hatta number' is ... reflux in case of distillation operation requires infinite number of plates for a binary system separation

Last Answer : (C) For a non-reacting binary mixture of ideal gases, the partial pressure distribution of both components is linear in the case of steady state equimolal counter-diffusion

For series reaction, the relative yield (A) Is always greater for plug-flow reactor than for the single CSTR of the same volume (B) Statement in (A) is wrong (C) Decreases with increasing conversion (D) Both (A) and (C) hold good

Description : For series reaction, the relative yield (A) Is always greater for plug-flow reactor than for the single CSTR of the same volume (B) Statement in (A) is wrong (C) Decreases with increasing conversion (D) Both (A) and (C) hold good

Last Answer : (D) Both (A) and (C) hold good

Pick out the wrong statement. (A) Catalytic activity of enzyme catalysed reactions which is affected by temperature, pH value & chemical agents, is maximum at a temperature of about 45°C(B) Most of the enzyme catalysed reactions involve at least two substrates (C) Enzymes help in increasing the activation energy of the reaction (D) Equilibrium concentrations in enzyme catalysed reactions can be calculated by using the thermodynamic properties of substrates & prod

Description : Pick out the wrong statement. (A) Catalytic activity of enzyme catalysed reactions which is affected by temperature, pH value & chemical agents, is maximum at a temperature of about 45°C ... in enzyme catalysed reactions can be calculated by using the thermodynamic properties of substrates & prod

Last Answer : (C) Enzymes help in increasing the activation energy of the reaction

Which of the following resistances is not involved in a gas phase catalytic (gas-solid) reaction?(A) Ash resistance (B) Gas film and pore surface diffusion resistances for reactants (C) Surface phenomenon resistance (D) Gas film and pore surface diffusion resistances for products

Description : Which of the following resistances is not involved in a gas phase catalytic (gas-solid) reaction? (A) Ash resistance (B) Gas film and pore surface diffusion resistances for reactants (C) Surface phenomenon resistance (D) Gas film and pore surface diffusion resistances for products

Last Answer : (A) Ash resistance

Which of the following factors control the design of a fluid-solid reactor? (A) Reaction kinetics for single particle (B) Size distribution of solids being treated (C) Flow patterns of solids and fluid in the reactor (D) All (A), (B) and (C)

Description : Which of the following factors control the design of a fluid-solid reactor? (A) Reaction kinetics for single particle (B) Size distribution of solids being treated (C) Flow patterns of solids and fluid in the reactor (D) All (A), (B) and (C)

Last Answer : (D) All (A), (B) and (C)

Kinetics is the study of: (1) The rate of chemical reaction (2) How fast the reactions go (3) The mechanisms and paths of the molecules take in joining from one reactant to products (4) All of these are correct

Description : Kinetics is the study of: (1) The rate of chemical reaction (2) How fast the reactions go (3) The mechanisms and paths of the molecules take in joining from one reactant to products (4) All of these are correct

Last Answer : (4) All of these are correct Explanation: In chemistry, the study of rates and mechanisms of chemical processes and, of the factors on which they depend, is called kinetics. is the study of ... provides a very detailed picture of which bonds are broken and formed during the course of a reaction.

Kinetics is the study of: (1) The rate of chemical reaction (2) How fast the reactions go (3) The mechanisms and paths of the molecules take in joining from one reactant to products (4) All of these are correct

Description : Kinetics is the study of: (1) The rate of chemical reaction (2) How fast the reactions go (3) The mechanisms and paths of the molecules take in joining from one reactant to products (4) All of these are correct

Last Answer : All of these are correct

A batch adiabatic reactor at an initial temperature of 373°K is being used for the reaction, A → B. Assume the heat of reaction is - 1kJ/mole at 373°K and heat capacity of both A and B to be constant and equal to 50J/mole.K. The temperature rise after a conversion of 0.5 will be: (A) 5°C (B) 10°C (C) 20°C (D) 100°C

Description : A batch adiabatic reactor at an initial temperature of 373°K is being used for the reaction, A → B. Assume the heat of reaction is - 1kJ/mole at 373°K and heat capacity of both A and B to be constant and equal ... rise after a conversion of 0.5 will be: (A) 5°C (B) 10°C (C) 20°C (D) 100°C

Last Answer : (B) 10°C

Pick out the wrong statement. (A) The integral method of analysing kinetic data is used when the data is scattered (B) The differential method of analysing kinetic data requires more accurate or larger amounts of data (C) When the reaction rate is independent of temperature, the reaction is said to be of zero order (D) The ratio of volumes of plug flow reactor to that of mixed reactor is always less than one for identical feed composition, flow rate, conversion and for all positive reaction orders

Description : Pick out the wrong statement. (A) The integral method of analysing kinetic data is used when the data is scattered (B) The differential method of analysing kinetic data requires more accurate ... less than one for identical feed composition, flow rate, conversion and for all positive reaction orders

Last Answer : (C) When the reaction rate is independent of temperature, the reaction is said to be of zero order

An isothermal aqueous phase reversible reaction, P ⇌ R, is to be carried out in a mixed flow reactor. The reaction rate in k.mole/m3 .h is given by, r = 0.5CP - 0.125CR. A stream containing only P enters the reactor. The residence time required (in hours) for 40% conversion of P is (A) 0.80 (B) 1.33 (C) 1.60 (D) 2.67

Description : An isothermal aqueous phase reversible reaction, P ⇌ R, is to be carried out in a mixed flow reactor. The reaction rate in k.mole/m3 .h is given by, r = 0.5CP - 0.125CR. A stream containing only P enters the reactor. The ... (in hours) for 40% conversion of P is (A) 0.80 (B) 1.33 (C) 1.60 (D) 2.67

Last Answer : (C) 1.60

For a heterogeneous catalytic reaction (A) Free energy of activation is lowered in the presence of catalyst, which remains unchanged at the end of reaction (B) A relatively small amount of catalyst can cause the conversion of large amount of reactants which does not mean that catalyst concentration is important (C) The catalyst does not form an intermediate complex with the reactant (D) The surface of the catalyst does not play an important role during reaction

Description : For a heterogeneous catalytic reaction (A) Free energy of activation is lowered in the presence of catalyst, which remains unchanged at the end of reaction (B) A relatively small amount of catalyst ... with the reactant (D) The surface of the catalyst does not play an important role during reaction

Last Answer : (A) Free energy of activation is lowered in the presence of catalyst, which remains unchanged at the end of reaction

Pick out the wrong statement. (A) The mole fraction of solute is directly proportional to the molality of a 'dilute' solution (B) For a non-reacting binary mixture of ideal gases, the partial pressure distribution of both components is nonlinear in the case of steady state unimolal unidirectional diffusion (C) Azeotropes obey Raoult's law at all temperature (D) The relative volatility of a binary mixture at the Azeotropic composition is 1

Description : Pick out the wrong statement. (A) The mole fraction of solute is directly proportional to the molality of a 'dilute' solution (B) For a non-reacting binary mixture of ideal gases, the partial ... at all temperature (D) The relative volatility of a binary mixture at the Azeotropic composition is 1

Last Answer : (C) Azeotropes obey Raoult's law at all temperature

Half life period of a chemical reaction is (A) The time required to reduce the concentration of the reacting substance to half its initial value (B) Half of the space time of a reaction (C) Half of the residence time of a reaction (D) None of these

Description : Half life period of a chemical reaction is (A) The time required to reduce the concentration of the reacting substance to half its initial value (B) Half of the space time of a reaction (C) Half of the residence time of a reaction (D) None of these

Last Answer : (A) The time required to reduce the concentration of the reacting substance to half its initial value

Sometimes, batch process is preferred over continuous process, when the product (A) Quality & yield cannot be achieved in continuous processes, because of long residence time (B) Sales demand is fluctuating (C) Both (A) & (B) (D) Neither (A) nor (B)

Description : Sometimes, batch process is preferred over continuous process, when the product (A) Quality & yield cannot be achieved in continuous processes, because of long residence time (B) Sales demand is fluctuating (C) Both (A) & (B) (D) Neither (A) nor (B)

Last Answer : (C) Both (A) & (B)

Batch process is preferred over continuous process, when the (A) Product yields and quality cannot be achieved in continuous process, because of long residence time (B) Sales demand of product is not steady (C) Same equipment cannot be used for several processes of the same nature (D) All (A), (B) & (C)

Description : Batch process is preferred over continuous process, when the (A) Product yields and quality cannot be achieved in continuous process, because of long residence time (B) Sales demand of product is not steady (C) Same ... be used for several processes of the same nature (D) All (A), (B) & (C)

Last Answer : (D) All (A), (B) & (C)

Batch process is preferred over continuous process, when the (A) Product yields and quality cannot be achieved in continuous process, because of long residence time (B) Sales demand of product is not steady (C) Same equipment cannot be used for several processes of the same nature (D) All (A), (B) & (C)

Description : Batch process is preferred over continuous process, when the (A) Product yields and quality cannot be achieved in continuous process, because of long residence time (B) Sales demand of product is not steady (C) Same ... cannot be used for several processes of the same nature (D) All (A), (B) & (C)

Last Answer : (B) Sales demand of product is not steady

Pick out the correct statement. (A) A catalyst does not change AH of the reaction (B) A catalyst changes the equilibrium point (C) Law of mass action was suggested by Le-Chatelier (D) The difference between the energy of reactants and that of the products is the activation energy

Description : Pick out the correct statement. (A) A catalyst does not change AH of the reaction (B) A catalyst changes the equilibrium point (C) Law of mass action was suggested by Le-Chatelier (D) The difference between the energy of reactants and that of the products is the activation energy

Last Answer : (A) A catalyst does not change AH of the reaction

The order of a chemical reaction (A) Can be determined only experimentally (B) Can be determined from the stoichiometry of the reaction (C) Cannot be zero (D) Can be fractional

Description : The order of a chemical reaction (A) Can be determined only experimentally (B) Can be determined from the stoichiometry of the reaction (C) Cannot be zero (D) Can be fractional

Last Answer : (B) Can be determined from the stoichiometry of the reaction (C) Cannot be zero

Rate constant for a first order reaction does not depend upon reaction time, extent of reaction and the initial concentration of reactants; but it is afunction of reaction temperature. In a chemical reaction, the time requiredto reduce the concentration of reactant from 100 gm moles/litre to 50 gmmoles/litre is same as that required to reduce it from 2 gm moles/litre to 1gm mole/litre in the same volume. Then the order of this reaction is:(A) 0(B) 1(C) 2(D) 3

Description : Rate constant for a first order reaction does not depend upon reaction time, extent of reaction and the initial concentration of reactants; but it is afunction of reaction temperature. In a chemical reaction, the time required to ... Then the order of this reaction is: (A) 0 (B) 1 (C) 2 (D) 3

Last Answer : (B) 1

What is the order of a chemical reaction in which doubling the initial concentration of the reactants doubles the half life time of the reaction? (A) 0 (B) 1 (C) 2 (D) 3

Description : What is the order of a chemical reaction in which doubling the initial concentration of the reactants doubles the half life time of the reaction? (A) 0 (B) 1 (C) 2 (D) 3

Last Answer : (A) 0

Pick out the wrong statement. (A) A catalyst does not alter the final position of equilibrium in a reversible reaction (B) A catalyst initiates a reaction (C) A catalyst is specific in reaction (D) A catalyst remains unchanged in chemical composition at the end the reaction

Description : Pick out the wrong statement. (A) A catalyst does not alter the final position of equilibrium in a reversible reaction (B) A catalyst initiates a reaction (C) A catalyst is specific in reaction (D) A catalyst remains unchanged in chemical composition at the end the reaction

Last Answer : (B) A catalyst initiates a reaction

If the rate of a chemical reaction becomes slower at a given temperature, then the (A) Initial concentration of the reactants remains constant (B) Free energy of activation is lower(C) Entropy changes(D) Free energy of activation is higher

Description : If the rate of a chemical reaction becomes slower at a given temperature, then the (A) Initial concentration of the reactants remains constant (B) Free energy of activation is lower (C) Entropy changes (D) Free energy of activation is higher

Last Answer : (D) Free energy of activation is higher

Pick out the wrong statement. (A) Catalytic hydrogenation of carbon monoxide produces methyl alcohol (B) In nylon-6, the number 6 represents the total number of carbon atoms in the ring (C) Raw materials for DDT manufacture are benzene and chlorine (D) Ethanolamines are produced by using ammonia and ethylene oxide as raw material

Description : Pick out the wrong statement. (A) Catalytic hydrogenation of carbon monoxide produces methyl alcohol (B) In nylon-6, the number 6 represents the total number of carbon atoms in the ring (C ... are benzene and chlorine (D) Ethanolamines are produced by using ammonia and ethylene oxide as raw material

Last Answer : (C) Raw materials for DDT manufacture are benzene and chlorine

Signal normally used to study non-ideal flow by stimulus response technique is __________ input. (A) Pulse (B) Step (C) Both (A) & (B) (D) Neither (A) nor (B)

Description : Signal normally used to study non-ideal flow by stimulus response technique is __________ input. (A) Pulse (B) Step (C) Both (A) & (B) (D) Neither (A) nor (B)

Last Answer : (C) Both (A) & (B)

For nearly isothermal operation involving large reaction time in a liquid-phase reaction, the most suitable reactor is a __________ reactor. (A) Stirred tank (B) Tubular flow (C) Batch (D) Fixed bed

Description : For nearly isothermal operation involving large reaction time in a liquid-phase reaction, the most suitable reactor is a __________ reactor. (A) Stirred tank (B) Tubular flow (C) Batch (D) Fixed bed

Last Answer : (A) Stirred tank