When a solid melts,  a. the temperature of the substance increases.  b. the temperature of the substance decreases.  c. heat leaves the substance.  d. heat enters the substance.

When a solid melts,
 a. the temperature of the substance increases.
 b. the temperature of the substance decreases.
 c. heat leaves the substance.
 d. heat enters the substance.
by

1 Answer

Answer :

heat enters the substance.
by

Related questions

_____ is that property of a substance which remains constant if no heat enters or leaves the substance, while it does work or alters its volume, but which increases or diminishes should a small amount of heat enter or leave.  a. Entrophy  b. Enthalpy  c. Specific Heat  d. None of the above

Description : _____ is that property of a substance which remains constant if no heat enters or leaves the substance, while it does work or alters its volume, but which increases or diminishes should a small amount of heat enter or leave.  a. Entrophy  b. Enthalpy  c. Specific Heat  d. None of the above

Last Answer : Entrophy

An adiabatic process is one in which  A.no heat enters or leaves the gas  B.the temperature of the gas changes  C.the change in internal energy is equal to the mechanical workdone  D.all of the above

Description : An adiabatic process is one in which  A.no heat enters or leaves the gas  B.the temperature of the gas changes  C.the change in internal energy is equal to the mechanical workdone  D.all of the above

Last Answer : Answer: D

An ideal gas is compressed in a cylinder so well insulated that there is essentially no heat transfer. The temperature of gas  a. Remains constant  b. increases  c. decreases  d. is basically zero

Description : An ideal gas is compressed in a cylinder so well insulated that there is essentially no heat transfer. The temperature of gas  a. Remains constant  b. increases  c. decreases  d. is basically zero

Last Answer : increases

What is the amount of heat needed to turn 1 kg of the substance at its melting point from the solid to liquid state?  A. Heat of fusion  B. Heat of vaporation  C. Heat of condensation  D. Heat of fission

Description : What is the amount of heat needed to turn 1 kg of the substance at its melting point from the solid to liquid state?  A. Heat of fusion  B. Heat of vaporation  C. Heat of condensation  D. Heat of fission

Last Answer : Heat of fusion

As we heat a gas at constant pressure, its volume  a. increases  b. decreases  c. stays the same  d. none of the above

Description : As we heat a gas at constant pressure, its volume  a. increases  b. decreases  c. stays the same  d. none of the above

Last Answer : increases

In a free expansion process  (a) work done is zero  (b) heat transfer is zero  (c) both (a) and (b) above  (d) work done is zero but heat increases  (e) work done is zero but heat decreases.

Description : In a free expansion process  (a) work done is zero  (b) heat transfer is zero  (c) both (a) and (b) above  (d) work done is zero but heat increases  (e) work done is zero but heat decreases.

Last Answer : Answer : c

On a day when the partial pressure of water vapor remains constant, what happens as the temperature rises?  a. the relative humidity increases  b. the relative humidity decreases  c. the relative humidity remains constant  d. the air would eventually become saturated

Description : On a day when the partial pressure of water vapor remains constant, what happens as the temperature rises?  a. the relative humidity increases  b. the relative humidity decreases  c. the relative humidity remains constant  d. the air would eventually become saturated

Last Answer : the relative humidity decreases

The volume of a given amount of water _________ as the temperature decreases from 4˚C to 0˚C.  a. decreases  b. increases  c. remains constant  d. none of the above

Description : The volume of a given amount of water _________ as the temperature decreases from 4˚C to 0˚C.  a. decreases  b. increases  c. remains constant  d. none of the above

Last Answer : increases

Twenty grams of ice at 0˚C melts to water at 0˚C. How much does the entropy of the 20g change in this process?  a. 30.5 J/K  b. 24.6 J/K  c. 21.3 J/K  d. 15.7 J/K

Description : Twenty grams of ice at 0˚C melts to water at 0˚C. How much does the entropy of the 20g change in this process?  a. 30.5 J/K  b. 24.6 J/K  c. 21.3 J/K  d. 15.7 J/K

Last Answer : 24.6 J/K

Amount of heat needed to rate the temperature of a substance by 1°C  a. Heat Exchange  b. Heat Engine  c. Specific Heat  d. None of the above

Description : Amount of heat needed to rate the temperature of a substance by 1°C  a. Heat Exchange  b. Heat Engine  c. Specific Heat  d. None of the above

Last Answer : Specific Heat

Heat which causes a change in temperature of a substance.  a. Latent heat  b. Sensible heat  c. Specific heat  d. Heat of Fusion

Description : Heat which causes a change in temperature of a substance.  a. Latent heat  b. Sensible heat  c. Specific heat  d. Heat of Fusion

Last Answer : Sensible heat

_________ is a measure of the average kinetic energy per molecule in a substance.  a. movement  b. temperature  c. heat  d. mass

Description : _________ is a measure of the average kinetic energy per molecule in a substance.  a. movement  b. temperature  c. heat  d. mass

Last Answer : temperature

The heat Q per unit mass per degree change in temperature that must be supplied or removed to change the temperature of a substance.  a. Specific Heat Capacity  b. Latent Heat  c. Heat of Transformation  d. Internal Heat

Description : The heat Q per unit mass per degree change in temperature that must be supplied or removed to change the temperature of a substance.  a. Specific Heat Capacity  b. Latent Heat  c. Heat of Transformation  d. Internal Heat

Last Answer : Specific Heat Capacity

The ______ of a substance is the amount of heat that must be added or removed from a unit mass of the substance to change its temperature by one degree.  A. Latent heat of fusion  B. Molar heat  C. Specific heat capacity  D. Specific heat

Description : The ______ of a substance is the amount of heat that must be added or removed from a unit mass of the substance to change its temperature by one degree.  A. Latent heat of fusion  B. Molar heat  C. Specific heat capacity  D. Specific heat

Last Answer : Specific heat capacity

What is defined as the energy required to raise the temperature of a unit mass of a substance by one degree?  A. Latent heat of fusion  B. Molar heat  C. Specific heat capacity  D. Specific heat

Description : What is defined as the energy required to raise the temperature of a unit mass of a substance by one degree?  A. Latent heat of fusion  B. Molar heat  C. Specific heat capacity  D. Specific heat

Last Answer : Specific heat

If heat be exchanged in a reversible manner, which of the following property of the working substance will change accordingly  (a) temperature  (b) enthalpy  (c) internal energy  (d) entropy  (e) all of the above.

Description : If heat be exchanged in a reversible manner, which of the following property of the working substance will change accordingly  (a) temperature  (b) enthalpy  (c) internal energy  (d) entropy  (e) all of the above.

Last Answer : Answer : d

_________ is the transition of a given substance from the solid to the gas phase with no intermediate liquid stage.  a. Convection  b. Conduction  c. Radiation  d. Sublimation

Description : _________ is the transition of a given substance from the solid to the gas phase with no intermediate liquid stage.  a. Convection  b. Conduction  c. Radiation  d. Sublimation

Last Answer : Sublimation

The pressure of the vapor phase of a substance that is in equilibrium with the liquid or solid phase.  a. Phase Pressure  b. Equilibrium Vapor Pressure  c. Specific Pressure  d. Equilibrium Phase Pressure

Description : The pressure of the vapor phase of a substance that is in equilibrium with the liquid or solid phase.  a. Phase Pressure  b. Equilibrium Vapor Pressure  c. Specific Pressure  d. Equilibrium Phase Pressure

Last Answer : Equilibrium Vapor Pressure

What is defined as the direct conversion of a substance from the solid to the vapor state or vice versa without passing the liquid state?  A. Condensation  B. Vaporization  C. Sublimation  D. Cryogenation

Description : What is defined as the direct conversion of a substance from the solid to the vapor state or vice versa without passing the liquid state?  A. Condensation  B. Vaporization  C. Sublimation  D. Cryogenation

Last Answer : Sublimation

The specific heat of air increases with increase in  (a) temperature  (b) pressure  (c) both pressure and temperature  (d) variation of its constituents  (e) air flow

Description : The specific heat of air increases with increase in  (a) temperature  (b) pressure  (c) both pressure and temperature  (d) variation of its constituents  (e) air flow

Last Answer : Answer : a

When liquid water is converted to steam at 100˚C, the entropy of water  a. increases  b. decreases  c. remains the same  d. none of the above

Description : When liquid water is converted to steam at 100˚C, the entropy of water  a. increases  b. decreases  c. remains the same  d. none of the above

Last Answer : increases

The entropy __________ in an irreversible cyclic process.  A. remains constant  B. decreases  C. increases

Description : The entropy __________ in an irreversible cyclic process.  A. remains constant  B. decreases  C. increases

Last Answer : Answer: C

The efficiency of Diesei cycle with decrease in cut off  (a) increases  (b) decreases  (c) remains unaffected  (d) first increases and then decreases  (e) first decreases and then increases.

Description : The efficiency of Diesei cycle with decrease in cut off  (a) increases  (b) decreases  (c) remains unaffected  (d) first increases and then decreases  (e) first decreases and then increases.

Last Answer : Answer : a

In an isothermal process, the internal energy  (a) increases  (b) decreases  (c) remains constant  (d) first increases and then decreases  (e) first decreases and then increases.

Description : In an isothermal process, the internal energy  (a) increases  (b) decreases  (c) remains constant  (d) first increases and then decreases  (e) first decreases and then increases.

Last Answer : Answer : c

In an isothermal process, the internal energy of gas molecules  (a) increases  (b) decreases  (c) remains constant  (d) may increase/decrease depending on the properties of gas  (e) shows unpredictable behaviour.

Description : In an isothermal process, the internal energy of gas molecules  (a) increases  (b) decreases  (c) remains constant  (d) may increase/decrease depending on the properties of gas  (e) shows unpredictable behaviour.

Last Answer : Answer : c

During throttling process  (a) heat exchange does not take place  (b) no work is done by expanding steam  (c) there is no change of internal energy of steam  (d) all of the above  (e) entropy decreases.

Description : During throttling process  (a) heat exchange does not take place  (b) no work is done by expanding steam  (c) there is no change of internal energy of steam  (d) all of the above  (e) entropy decreases.

Last Answer : Answer : d

Entropy is the measure of:  a. The internal energy of a gas  b. The heat capacity of a substance  c. Randomness or disorder  d. The change of enthalpy of a system

Description : Entropy is the measure of:  a. The internal energy of a gas  b. The heat capacity of a substance  c. Randomness or disorder  d. The change of enthalpy of a system

Last Answer : Randomness or disorder

The ratio of the weight of a substance to the weight of some standard substance is called?  a. Specific Heat  b. Specific Gravity  c. Isothermal  d. Specific Weight

Description : The ratio of the weight of a substance to the weight of some standard substance is called?  a. Specific Heat  b. Specific Gravity  c. Isothermal  d. Specific Weight

Last Answer : Specific Gravity

Sum of the internal energy of a substance and the product of pressure and volume.  a. Specific Heat  b. Specific Gravity  c. Isolated System  d. Enthalpy

Description : Sum of the internal energy of a substance and the product of pressure and volume.  a. Specific Heat  b. Specific Gravity  c. Isolated System  d. Enthalpy

Last Answer : Enthalpy

The amount of heat energy per kilogram that must be added or removed when a substance changes from one phase to another.  a. specific heat  b. heat of expansion  c. latent heat  d. useful heat

Description : The amount of heat energy per kilogram that must be added or removed when a substance changes from one phase to another.  a. specific heat  b. heat of expansion  c. latent heat  d. useful heat

Last Answer : latent heat

What is the amount of heat needed to turn 1kg of the substance at its boiling point from the liquid to the gaseous state?  A. Heat of fusion  B. Heat of vaporation  C. Heat of condensation  D. Heat of fission

Description : What is the amount of heat needed to turn 1kg of the substance at its boiling point from the liquid to the gaseous state?  A. Heat of fusion  B. Heat of vaporation  C. Heat of condensation  D. Heat of fission

Last Answer : Heat of vaporation

What refers to the measure of the disorder present in a given substance or system?  A. Enthalpy  B. Entropy  C. Heat capacity  D. Molar heat

Description : What refers to the measure of the disorder present in a given substance or system?  A. Enthalpy  B. Entropy  C. Heat capacity  D. Molar heat

Last Answer : Entropy

What is the heat capacity of one gram of a substance?  A. Molecular heat  B. Specific heat  C. Latent heat  D. Molar heat

Description : What is the heat capacity of one gram of a substance?  A. Molecular heat  B. Specific heat  C. Latent heat  D. Molar heat

Last Answer : Specific heat

What is the heat capacity of one mole of substance?  A. Molecular heat  B. Specific heat  C. Latent heat  D. Molar heat

Description : What is the heat capacity of one mole of substance?  A. Molecular heat  B. Specific heat  C. Latent heat  D. Molar heat

Last Answer : Molar heat

A closed system is one in which heat and work crosses the boundary of the system but the mass of the working substance does not crosses the boundary of the system.  A. Yes  B. No

Description : A closed system is one in which heat and work crosses the boundary of the system but the mass of the working substance does not crosses the boundary of the system.  A. Yes  B. No

Last Answer : Answer: A

According to first law of thermodynamics  (a) mass and energy are mutually convertible  (b) Carnot engine is most efficient  (c) heat and work are mutually convertible  (d) mass and light are mutually convertible  (e) heat flows from hot substance to cold substance.

Description : According to first law of thermodynamics  (a) mass and energy are mutually convertible  (b) Carnot engine is most efficient  (c) heat and work are mutually convertible  (d) mass and light are mutually convertible  (e) heat flows from hot substance to cold substance.

Last Answer : Answer : c

Total heat of a substance is also known as  (a) internal energy  (b) entropy  (c) thermal capacity  (d) enthalpy  (e) thermal conductance.

Description : Total heat of a substance is also known as  (a) internal energy  (b) entropy  (c) thermal capacity  (d) enthalpy  (e) thermal conductance.

Last Answer : Answer : d

When the gas is heated at constant volume, the heat supplied increases the internal energy of the gas.  A.True  B.False

Description : When the gas is heated at constant volume, the heat supplied increases the internal energy of the gas.  A.True  B.False

Last Answer : Answer: A

What is the entropy of a pure substance at a temperature of absolute zero?  a. unity  b. zero  c. infinity  d. undefined

Description : What is the entropy of a pure substance at a temperature of absolute zero?  a. unity  b. zero  c. infinity  d. undefined

Last Answer : zero

Mixture of liquid and steam of the same substance in which both are at saturation temperature.  a. dry steam  b. current steam  c. wet steam  d. aerosol

Description : Mixture of liquid and steam of the same substance in which both are at saturation temperature.  a. dry steam  b. current steam  c. wet steam  d. aerosol

Last Answer : wet steam

In order to use a substance to make a thermometer the substance must _________ with a temperature change.  a. expand  b. contract  c. change  d. increase

Description : In order to use a substance to make a thermometer the substance must _________ with a temperature change.  a. expand  b. contract  c. change  d. increase

Last Answer : change

A plot of pressure vs. temperature for a given substance showing the various phases possible for that particular substance.  a. Phase diagram  b. P-T diagram  c. Wein Diagram  d. Histogram

Description : A plot of pressure vs. temperature for a given substance showing the various phases possible for that particular substance.  a. Phase diagram  b. P-T diagram  c. Wein Diagram  d. Histogram

Last Answer : Phase diagram

The change in physical size of a substance when its temperature changes.  a. intensive property  b. extensive property  c. volume expansion  d. thermal expansion

Description : The change in physical size of a substance when its temperature changes.  a. intensive property  b. extensive property  c. volume expansion  d. thermal expansion

Last Answer : thermal expansion

What states that the entropy of a pure crystalline substance at absolute zero temperature is zero?  A. Zeroth law of thermodynamics  B. First law of thermodynamics  C. Second law of thermodynamics  D. Third law of thermodynamics

Description : What states that the entropy of a pure crystalline substance at absolute zero temperature is zero?  A. Zeroth law of thermodynamics  B. First law of thermodynamics  C. Second law of thermodynamics  D. Third law of thermodynamics

Last Answer : Third law of thermodynamics

What is constant for a substance that is considered “incompressible”?  A. Specific volume of density  B. Pressure  C. Temperature  D. All of the above

Description : What is constant for a substance that is considered “incompressible”?  A. Specific volume of density  B. Pressure  C. Temperature  D. All of the above

Last Answer : Specific volume of density

The “equation of state” refers to any equation that relates the ______ of the substance.  A. Pressure and temperature  B. Pressure, temperature and specific weight  C. Temperature and specific weight  D. Pressure, temperature and specific volume

Description : The “equation of state” refers to any equation that relates the ______ of the substance.  A. Pressure and temperature  B. Pressure, temperature and specific weight  C. Temperature and specific weight  D. Pressure, temperature and specific volume

Last Answer : Pressure, temperature and specific volume

What refers to the pressure at which a pure substance changes phase at a given temperature?  A. Equilibrium pressure  B. Saturation pressure  C. Superheated pressure  D. Subcooled pressure

Description : What refers to the pressure at which a pure substance changes phase at a given temperature?  A. Equilibrium pressure  B. Saturation pressure  C. Superheated pressure  D. Subcooled pressure

Last Answer : Saturation pressure

What refers to the temperature at which a pure substance changes phase at a given pressure?  A. Equilibrium temperature  B. Saturation temperature  C. Superheated temperature  D. Subcooled temperature

Description : What refers to the temperature at which a pure substance changes phase at a given pressure?  A. Equilibrium temperature  B. Saturation temperature  C. Superheated temperature  D. Subcooled temperature

Last Answer : Saturation temperature

A process, in which the temperature of the working substance remains constant during its expansion or compression, is called  A. isothermal process  B. hyperbolic process  C. adiabatic process  D. polytropic process

Description : A process, in which the temperature of the working substance remains constant during its expansion or compression, is called  A. isothermal process  B. hyperbolic process  C. adiabatic process  D. polytropic process

Last Answer : Answer: A

Carnot cycle efficiency depends upon  (a) properties of the medium/substance used  (b) condition of engine  (c) working condition  (d) temperature range of operation  (e) effectiveness of insulating material around the engine.

Description : Carnot cycle efficiency depends upon  (a) properties of the medium/substance used  (b) condition of engine  (c) working condition  (d) temperature range of operation  (e) effectiveness of insulating material around the engine.

Last Answer : Answer : d