Water flowing at a 6m/s through a 60 mm pipe is suddenly channeled into a 30 mm pipe. What is the velocity in the small pipe?  a. 34m/s  b. 24m/s  c. 15m/s  d. 27m/s

Water flowing at a 6m/s through a
60 mm pipe is suddenly channeled into
a 30 mm pipe. What is the velocity in the
small pipe?
 a. 34m/s
 b. 24m/s
 c. 15m/s
 d. 27m/s
by

1 Answer

Answer :

24m/s
by

Related questions

Water is flowing through a 1 foot diameter pipe at the rate of 10ft/sec. What is the volume flow rate of water in ft³/sec?  a. 7.85  b. 6.85  c. 8.85  d. 5.85 V = Aν

Description : Water is flowing through a 1 foot diameter pipe at the rate of 10ft/sec. What is the volume flow rate of water in ft³/sec?  a. 7.85  b. 6.85  c. 8.85  d. 5.85 V = Aν

Last Answer : 7.85

Wet steam at 1 MPa flowing through a pipe is throttled to a pressure of 0.1 MPa. If the throttling temperature is110°C, What is the quality of the steam in the pipe?  a) 96%  b) 86%  c) 76%  d) 66%

Description : Wet steam at 1 MPa flowing through a pipe is throttled to a pressure of 0.1 MPa. If the throttling temperature is110°C, What is the quality of the steam in the pipe?  a) 96%  b) 86%  c) 76%  d) 66%

Last Answer : 96%

What is the force required to accelerate amass of 30kg at a rate of 15m/s².  a. 460 N  b. 380 N  c. 560 N  d. 450 N F = ma

Description : What is the force required to accelerate amass of 30kg at a rate of 15m/s².  a. 460 N  b. 380 N  c. 560 N  d. 450 N F = ma

Last Answer : 450 N

A certain fluid is flowing in a 0.5m x 0.3 channel at the rate of 3 m/s and has a specific volume of 0.012 m³/kg. Determined the mass of water flowing in kg/s.  a. 267 kg/s  b. 378 kg/s  c. 375 kg/s  d. 456.5 kg/s m = Aν/V

Description : A certain fluid is flowing in a 0.5m x 0.3 channel at the rate of 3 m/s and has a specific volume of 0.012 m³/kg. Determined the mass of water flowing in kg/s.  a. 267 kg/s  b. 378 kg/s  c. 375 kg/s  d. 456.5 kg/s m = Aν/V

Last Answer : 375 kg/s

If a fluid expands suddenly into vacuum through an orifice of large dimension, then such a process is called  (a) free expansion  (b) hyperbolic expansion  (c) adiabatic expansion  (d) parabolic expansion  (e) throttling.

Description : If a fluid expands suddenly into vacuum through an orifice of large dimension, then such a process is called  (a) free expansion  (b) hyperbolic expansion  (c) adiabatic expansion  (d) parabolic expansion  (e) throttling.

Last Answer : Answer : a

The pressure drop in a 30 cm diameter horizontal pipe is 60 kPa in distance of 15m. The wall shear stress in kPa is (a) 0.1 (b) 0.2 (c) 0.3 (d) 0.4

Description : The pressure drop in a 30 cm diameter horizontal pipe is 60 kPa in distance of 15m. The wall shear stress in kPa is (a) 0.1 (b) 0.2 (c) 0.3 (d) 0.4

Last Answer : (c) 0.3

Water flow to a terminal 3 mm diameter and has an average speed of 2 m/s. What is the rate of flow in cubic meter/mm?  a. 0.0001m³/min  b. 0.076 m³/min  c. 0.085 m³/min  d. 0.097 m³/min

Description : Water flow to a terminal 3 mm diameter and has an average speed of 2 m/s. What is the rate of flow in cubic meter/mm?  a. 0.0001m³/min  b. 0.076 m³/min  c. 0.085 m³/min  d. 0.097 m³/min

Last Answer : 0.085 m³/min

The unit of pressure in S.I. units is  (a) kg/cm2  (b) mm of water column  (c) pascal  (d) dynes per square cm  (e) bars

Description : The unit of pressure in S.I. units is  (a) kg/cm2  (b) mm of water column  (c) pascal  (d) dynes per square cm  (e) bars

Last Answer : Answer : c

A 600kg hammer of a pile driver is lilted 2m the pilling head. What is the change of potential energy? If the hammer is realest. What will be its velocity and the instant if it sticks the pilling?  a. 10,772 N-m and 5.26m/s  b. 13,200 N-m and 5.26m/s  c. 11,772 N-m and 6.26m/s  d. 11,77 2N-m and5.26m/s ∫PE = mgo(∫Z)/gc

Description : A 600kg hammer of a pile driver is lilted 2m the pilling head. What is the change of potential energy? If the hammer is realest. What will be its velocity and the instant if it sticks the pilling?  a. 10,772 N-m and 5.26m/s ...  c. 11,772 N-m and 6.26m/s  d. 11,77 2N-m and5.26m/s ∫PE = mgo(∫Z)/gc

Last Answer : 11,772 N-m and 6.26m/s

Calculate: a. Mass flow rate in lb/hr. b. The velocity at section 2 in fps  a. 800,000lb/hr;625ft/s  b. 900,000lb/hr;625 ft/s  c. 888,000lb/hr;269 ft/s  d. 700,000lb/hr;269 ft/s m = A1V!/V1

Description : Calculate: a. Mass flow rate in lb/hr. b. The velocity at section 2 in fps  a. 800,000lb/hr;625ft/s  b. 900,000lb/hr;625 ft/s  c. 888,000lb/hr;269 ft/s  d. 700,000lb/hr;269 ft/s m = A1V!/V1

Last Answer : 900,000 lb/hr;625 ft/s

Calculate the entropy of steam at 60psiawith a quality of 0.8  A. 0.4274 BTU/lbm-˚R  B. 0.7303 BTU/lbm-˚R  C. 1.1577 BTU/lbm-˚R  D. 1.2172 BTU/lbm-˚R Formula: fromthe steamtable at 60 psia: sƒ = 0.4274 BTU/lbm-˚R sƒg = 1.2172 BTU/lbm-˚R) s = sƒ + x sƒg where x = is the quality

Description : Calculate the entropy of steam at 60psiawith a quality of 0.8  A. 0.4274 BTU/lbm-˚R  B. 0.7303 BTU/lbm-˚R  C. 1.1577 BTU/lbm-˚R  D. 1.2172 BTU/lbm-˚R Formula: fromthe steamtable at 60 psia: sƒ = 0.4274 BTU/lbm-˚R sƒg = 1.2172 BTU/lbm-˚R) s = sƒ + x sƒg where x = is the quality

Last Answer : 1.1577 BTU/lbm-˚R

The molecules of a gas moving through space with some velocity possesses what kind of energy?  A. Translational energy  B. Spin energy  C. Rotational kinetic energy  D. Sensible energy

Description : The molecules of a gas moving through space with some velocity possesses what kind of energy?  A. Translational energy  B. Spin energy  C. Rotational kinetic energy  D. Sensible energy

Last Answer : Translational energy

Water hammer is caused, when water flowing in a pipe is suddenly brought to rest by closing the valve. The extent of pressure thus produced due to water hammer depends on the (A) Pipe length (B) Fluid velocity in the pipe (C) Time taken to close the valve (D) All (A), (B) and (C)

Description : Water hammer is caused, when water flowing in a pipe is suddenly brought to rest by closing the valve. The extent of pressure thus produced due to water hammer depends on the (A) Pipe length (B) Fluid velocity in the pipe (C) Time taken to close the valve (D) All (A), (B) and (C)

Last Answer : (D) All (A), (B) and (C)

A steam calorimeter receives steam from a pipe at 0.1 MPa and 20°SH. For a pipe steam pressure of 2 MPa, what is the quality of the steam?  a) 95.56%  b) 70.10%  c) 95.20%  d) 85.10% Formula: h1 = hf1 + x1hfg1

Description : A steam calorimeter receives steam from a pipe at 0.1 MPa and 20°SH. For a pipe steam pressure of 2 MPa, what is the quality of the steam?  a) 95.56%  b) 70.10%  c) 95.20%  d) 85.10% Formula: h1 = hf1 + x1hfg1

Last Answer : 265.4°C, 430.7kJ/kg, 71.4kJ/kg, 1.0327kJ/(kg)(K),502.1 kJ/kg

The value of 1 mm of Hg is equal to  A. 1.333 N/m2  B. 13.33 N/m2  C. 133.3 N/m2  D. 1333 N/m2

Description : The value of 1 mm of Hg is equal to  A. 1.333 N/m2  B. 13.33 N/m2  C. 133.3 N/m2  D. 1333 N/m2

Last Answer : Answer: C

Barometric pressure is equal to  (a) 760 mm Hg  (b) zero mm Hg  (c) 735.6 mm Hg  (d) 1 mm Hg  (e) 100mm Hg.

Description : Barometric pressure is equal to  (a) 760 mm Hg  (b) zero mm Hg  (c) 735.6 mm Hg  (d) 1 mm Hg  (e) 100mm Hg.

Last Answer : Answer : a

I kgf/cm2 is equal to  (a) 760 mm Hg  (b) zero mm Hg  (c) 735.6 mm Hg  (d) 1 mm Hg  (e) l00 mm Hg.

Description : I kgf/cm2 is equal to  (a) 760 mm Hg  (b) zero mm Hg  (c) 735.6 mm Hg  (d) 1 mm Hg  (e) l00 mm Hg.

Last Answer : Answer : c

It is the unbalanced force developed in a turbo jet engine that is caused by the difference in the momentum of the low-velocity air entering the engine and the high velocity exhaust gases leaving the engine.  a. Fall  b. Lift  c. Drag  d. Thrust

Description : It is the unbalanced force developed in a turbo jet engine that is caused by the difference in the momentum of the low-velocity air entering the engine and the high velocity exhaust gases leaving the engine.  a. Fall  b. Lift  c. Drag  d. Thrust

Last Answer : Thrust

A vector quantity whose direction is the same as the direction of the velocity  a. Force  b. Momentum  c. Friction  d. Resultant

Description : A vector quantity whose direction is the same as the direction of the velocity  a. Force  b. Momentum  c. Friction  d. Resultant

Last Answer : Momentum

A fluid flows in a steady manner between two section in a flow line at section 1: A 1 = 1ft², V1 = 100fpm, volume1 of 4ft³/lb. at sec2: A2 = 2 ft², p= 0.20 lb/ft³ calculate the velocity at section 2.  a. 625 fpm  b. 567 fpm  c. 356 fpm  d. None of the above

Description : A fluid flows in a steady manner between two section in a flow line at section 1: A 1 = 1ft², V1 = 100fpm, volume1 of 4ft³/lb. at sec2: A2 = 2 ft², p= 0.20 lb/ft³ calculate the velocity at section 2.  a. 625 fpm  b. 567 fpm  c. 356 fpm  d. None of the above

Last Answer : 625 fpm

The distribution of particle speeds in an ideal gas at a given temperature.  a. velocity of propagation  b. escape velocity  c. Maxwell speed Distribution  d. terminal velocity

Description : The distribution of particle speeds in an ideal gas at a given temperature.  a. velocity of propagation  b. escape velocity  c. Maxwell speed Distribution  d. terminal velocity

Last Answer : Maxwell speed Distribution

The weight of an object is 50lb. What is its mass at standard condition?  a. 50 lbm  b. 60 lbm  c. 70 lbm  d. 80 lbm formula: m = Fgk /g

Description : The weight of an object is 50lb. What is its mass at standard condition?  a. 50 lbm  b. 60 lbm  c. 70 lbm  d. 80 lbm formula: m = Fgk /g

Last Answer : 50 lbm

Twenty grams of ice at 0˚C melts to water at 0˚C. How much does the entropy of the 20g change in this process?  a. 30.5 J/K  b. 24.6 J/K  c. 21.3 J/K  d. 15.7 J/K

Description : Twenty grams of ice at 0˚C melts to water at 0˚C. How much does the entropy of the 20g change in this process?  a. 30.5 J/K  b. 24.6 J/K  c. 21.3 J/K  d. 15.7 J/K

Last Answer : 24.6 J/K

A 30-m vertical column of fluid (density 1878 kg/m3 ) is located where g= 9.65 mps2 . Find the pressure at the base of the column. (Formula: pg= gρhg/k )  a. 543680 N/m2  b. 543.68 kPa (gauge)  c. Both a & b  d. None of the above

Description : A 30-m vertical column of fluid (density 1878 kg/m3 ) is located where g= 9.65 mps2 . Find the pressure at the base of the column. (Formula: pg= gρhg/k )  a. 543680 N/m2  b. 543.68 kPa (gauge)  c. Both a & b  d. None of the above

Last Answer : Both a & b

Twenty grams of oxygen gas are compressed at a constant temperature of 30 ˚C to 5%of their original volume. What work is done on the system.  A.824 cal  B.924 cal  C.944 cal  D.1124 cal Formula: W = -mRTln (V2/V1) Where R = (1.98 cal/gmole·K) (32 g/gmole)

Description : Twenty grams of oxygen gas are compressed at a constant temperature of 30 ˚C to 5%of their original volume. What work is done on the system.  A.824 cal  B.924 cal  C.944 cal  D.1124 cal Formula: W = -mRTln (V2/V1) Where R = (1.98 cal/gmole·K) (32 g/gmole)

Last Answer : 1124 cal

From the steam table, determine the average constant pressure specific heat (c) of steam at 10 kPa and45.8 ˚C  A.1.79 kJ/ kg-˚C  B.10.28 kJ/ kg-˚C  C.30.57 kJ/ kg-˚C  D. 100.1 kJ/ kg-˚C Formula: h = c T ∆ ∆ From the steam table At 47.7 ˚C h= 2588.1 kJ/ kg At 43.8 ˚C h= 2581.1 kJ/ kg

Description : From the steam table, determine the average constant pressure specific heat (c) of steam at 10 kPa and45.8 ˚C  A.1.79 kJ/ kg-˚C  B.10.28 kJ/ kg-˚C  C.30.57 kJ/ kg-˚C  D. 100.1 kJ/ kg-˚C Formula: h = c T ∆ ∆ From the steam table At 47.7 ˚C h= 2588.1 kJ/ kg At 43.8 ˚C h= 2581.1 kJ/ kg

Last Answer : 1.79 kJ/ kg-˚C

The compression ratio for Diesel engines is  A. 3 to 6  B. 5 to 8  C. 15 to 20  D. 20 to 30

Description : The compression ratio for Diesel engines is  A. 3 to 6  B. 5 to 8  C. 15 to 20  D. 20 to 30

Last Answer : Answer: C

The compression ratio for petrol engines is  A.3 to 6  B.5 to 8  C.15 to 20  D.20 to 30

Description : The compression ratio for petrol engines is  A.3 to 6  B.5 to 8  C.15 to 20  D.20 to 30

Last Answer : Answer: B

A gas is compressed in a cylinder by a movable piston to a volume onehalf its original volume. During the process 300 kJ heat left the gas and internal energy remained same. The work done on gas in Nm will be  (a) 300 Nm  (b) 300,000 Nm  (c) 30 Nm  (d) 3000 Nm  (e) 30,000 Nm.

Description : A gas is compressed in a cylinder by a movable piston to a volume onehalf its original volume. During the process 300 kJ heat left the gas and internal energy remained same. The work done on gas in Nm will be  (a) 300 Nm  (b) 300,000 Nm  (c) 30 Nm  (d) 3000 Nm  (e) 30,000 Nm.

Last Answer : Answer : b

Which is NOT a correct statement?  A. A superheated vapor will not condense when small amount of heat re removed  B. An ideal gas is a gas that is not a superheated vapor  C. A saturated liquid can absorb as much heat as it can without vaporizing  D. Water at 1 atm and room temperature is subcooled

Description : Which is NOT a correct statement?  A. A superheated vapor will not condense when small amount of heat re removed  B. An ideal gas is a gas that is not a superheated vapor  C. A saturated ... absorb as much heat as it can without vaporizing  D. Water at 1 atm and room temperature is subcooled

Last Answer : An ideal gas is a gas that is not a superheated vapor

_____ is that property of a substance which remains constant if no heat enters or leaves the substance, while it does work or alters its volume, but which increases or diminishes should a small amount of heat enter or leave.  a. Entrophy  b. Enthalpy  c. Specific Heat  d. None of the above

Description : _____ is that property of a substance which remains constant if no heat enters or leaves the substance, while it does work or alters its volume, but which increases or diminishes should a small amount of heat enter or leave.  a. Entrophy  b. Enthalpy  c. Specific Heat  d. None of the above

Last Answer : Entrophy

_________ the very small KE still present in molecules at absolute zero temperature.  a. internal KE  b. Atomic kinetic energy  c. Zero-Point Energy  d. Subliminal Energy

Description : _________ the very small KE still present in molecules at absolute zero temperature.  a. internal KE  b. Atomic kinetic energy  c. Zero-Point Energy  d. Subliminal Energy

Last Answer : Zero-Point Energy

Boyle’s law i.e. pV = constant is applicable to gases under  (a) all ranges of pressures  (b) only small range of pressures  (c) high range of pressures  (d) steady change of pressures  (e) atmospheric conditions.

Description : Boyle’s law i.e. pV = constant is applicable to gases under  (a) all ranges of pressures  (b) only small range of pressures  (c) high range of pressures  (d) steady change of pressures  (e) atmospheric conditions.

Last Answer : Answer : b

Water (specific heat cv= 4.2 kJ/ kg ∙ K ) is being heated by a 1500 W h eater. What is the rate of change in temperature of 1kg of the water?  A. 0.043 K/s  B. 0.179 K/s  C. 0.357 K/s  D. 1.50 K/s Formula: Q = mcv ( T)

Description : Water (specific heat cv= 4.2 kJ/ kg ∙ K ) is being heated by a 1500 W h eater. What is the rate of change in temperature of 1kg of the water?  A. 0.043 K/s  B. 0.179 K/s  C. 0.357 K/s  D. 1.50 K/s Formula: Q = mcv ( T)

Last Answer : 0.179 K/s

The amount of heat required to raise the temperature of 1kg of water through 1 °C is called ______.  A. Calorie  B. Joule  C. BTU  D. Kilocalorie

Description : The amount of heat required to raise the temperature of 1kg of water through 1 °C is called ______.  A. Calorie  B. Joule  C. BTU  D. Kilocalorie

Last Answer : Kilocalorie

The specific heat at constant volume is  A. the amount of heat required to raise the temperature of unit mass of gas through one degree, at constant pressure  B. the amount of heat required to raise the temperature of unit mass of gas through one degree, at constant volume  C. the amount of heat required to raise the temperature of 1 kg of water through one degree  D. any one of the above

Description : The specific heat at constant volume is  A. the amount of heat required to raise the temperature of unit mass of gas through one degree, at constant pressure  B. the amount of heat required to raise ... to raise the temperature of 1 kg of water through one degree  D. any one of the above

Last Answer : Answer: B

Water contained in a beaker can be made to boil by passing steam through it  (a) at atmospheric pressure  (b) at a pressure below the firuosphejric pressure  (c) at a pressure greater than atmospheric pressure  (d) any pressure  (e) not possible.

Description : Water contained in a beaker can be made to boil by passing steam through it  (a) at atmospheric pressure  (b) at a pressure below the firuosphejric pressure  (c) at a pressure greater than atmospheric pressure  (d) any pressure  (e) not possible.

Last Answer : Answer : c

A pipe of I.D. 4 m is bifurcated into two pipes of I.D. 2 m each. If the average velocity of water flowing through the main pipe is 5 m/sec, the average velocity through the bifurcated pipes is (A) 20 m/sec (B) 10 m/sec (C) 5 √2 m/sec (D) 5 m/sec

Description : A pipe of I.D. 4 m is bifurcated into two pipes of I.D. 2 m each. If the average velocity of water flowing through the main pipe is 5 m/sec, the average velocity through the bifurcated pipes is (A) 20 m/sec (B) 10 m/sec (C) 5 √2 m/sec (D) 5 m/sec

Last Answer : (B) 10 m/sec

Calculate the power output in horsepower of an 80-kg man that climbs a flight of stairs 3.8 m high in 4.0 s.  a) 744.8 hp  b) 0.998 hp  c) 746 hp  d) 1.998 hp Formula: Power = Fd/t = mgh/t F = W = mg d = h

Description : Calculate the power output in horsepower of an 80-kg man that climbs a flight of stairs 3.8 m high in 4.0 s.  a) 744.8 hp  b) 0.998 hp  c) 746 hp  d) 1.998 hp Formula: Power = Fd/t = mgh/t F = W = mg d = h

Last Answer : 0.998 hp

A bayabas falls from a branch 5m above the ground with what speed in meter per second does it strike the ground assume g = 10m/s².  a. 11m/s  b. 12m/s  c. 13m/s  d. 10m/s ∫KE = mV2/2gc

Description : A bayabas falls from a branch 5m above the ground with what speed in meter per second does it strike the ground assume g = 10m/s².  a. 11m/s  b. 12m/s  c. 13m/s  d. 10m/s ∫KE = mV2/2gc

Last Answer : 10m/s

Refer to problem # 11. Determine the force that accelerates if to 12 m/s^2. horizontally along frictionless plane.  A. 2474.23 N  B. 2574.23 N  C. 3474.23 N  D. 2374.23 N Formula : M = wk / g F = ma /k

Description : Refer to problem # 11. Determine the force that accelerates if to 12 m/s^2. horizontally along frictionless plane.  A. 2474.23 N  B. 2574.23 N  C. 3474.23 N  D. 2374.23 N Formula : M = wk / g F = ma /k

Last Answer : 2474.23 N

A system weighing 2kN. Determine the force that accelerate if to 12 m/s^2. a. vertically upward when g = 9.7 m/s^2  A. 4474.23 N  B.5484.23 N  C.4495.23 N  D.5488.23 N Formula: F = m/k (a +g)

Description : A system weighing 2kN. Determine the force that accelerate if to 12 m/s^2. a. vertically upward when g = 9.7 m/s^2  A. 4474.23 N  B.5484.23 N  C.4495.23 N  D.5488.23 N Formula: F = m/k (a +g)

Last Answer : 4474.23 N

One joule is equivalent to one _____.  A. Kg m/ s^2 ∙  B. Kg m^2/s^2 ∙  C. Kg m^2/s ∙  D. Kg m/s

Description : One joule is equivalent to one _____.  A. Kg m/ s^2 ∙  B. Kg m^2/s^2 ∙  C. Kg m^2/s ∙  D. Kg m/s

Last Answer : Kg m^2/s^2

The area under the temperatureentropy curve (T – s curve) of any thermodynamic process represents  A. heat absorbed  B. heat rejected  C. either (a) or (b)  D. none of these

Description : The area under the temperatureentropy curve (T – s curve) of any thermodynamic process represents  A. heat absorbed  B. heat rejected  C. either (a) or (b)  D. none of these

Last Answer :  C. either (a) or (b)

The value of gas constant (R) in S. I. units is  A. 0.287 J/kgK  B. 2.87 J/kgK  C. 28.7 J/kgK  D. 287 J/kgK

Description : The value of gas constant (R) in S. I. units is  A. 0.287 J/kgK  B. 2.87 J/kgK  C. 28.7 J/kgK  D. 287 J/kgK

Last Answer : Answer: D

The value of the product of molecular weight and the gas characteristic constant for all the gases in S.I. units is  (a) 29.27 J/kmol°K  (b) 83.14J/kmol°K  (c) 848J/kmol°K  (d) All J/kmol °K  (e) 735 J/kmol °K.

Description : The value of the product of molecular weight and the gas characteristic constant for all the gases in S.I. units is  (a) 29.27 J/kmol°K  (b) 83.14J/kmol°K  (c) 848J/kmol°K  (d) All J/kmol °K  (e) 735 J/kmol °K.

Last Answer : Answer : b

The value of the product of molecular weight and the gas characteristic constant for all the gases in M.K.S. unit is  (a) 29.27 kgfm/mol°K  (b) 8314kgfm/mol°K  (c) 848kgfm/mol°K  (d) 427kgfm/mol°K  (e) 735 kgfm/mol°K.

Description : The value of the product of molecular weight and the gas characteristic constant for all the gases in M.K.S. unit is  (a) 29.27 kgfm/mol°K  (b) 8314kgfm/mol°K  (c) 848kgfm/mol°K  (d) 427kgfm/mol°K  (e) 735 kgfm/mol°K.

Last Answer : Answer : c

One watt is equal to  (a) 1 Nm/s  (b) 1 N/mt  (c) 1 Nm/hr  (d) 1 kNm/hr  (e) 1 kNm/mt.

Description : One watt is equal to  (a) 1 Nm/s  (b) 1 N/mt  (c) 1 Nm/hr  (d) 1 kNm/hr  (e) 1 kNm/mt.

Last Answer : Answer : a

The unit of power in S.I. units is  (a) newton  (b) pascal  (c) erg  (d) watt  (e) joule.

Description : The unit of power in S.I. units is  (a) newton  (b) pascal  (c) erg  (d) watt  (e) joule.

Last Answer : Answer : d

The unit of energy in S.I. units is  (a) watt  (b) joule  (c) joule/s  (d) joule/m  (e) joule m.

Description : The unit of energy in S.I. units is  (a) watt  (b) joule  (c) joule/s  (d) joule/m  (e) joule m.

Last Answer : Answer : b