Which is not true about Heat (Q):  a. Q is positive when heat is added to the body or system  b. Q is negative when heat is rejected by the body or system  c. Q is positive when heat is rejected by the body or system  d. None of the above

Which is not true about Heat (Q):
 a. Q is positive when heat is
added to the body or system
 b. Q is negative when heat is
rejected by the body or system
 c. Q is positive when heat is
rejected by the body or system
 d. None of the above
by

1 Answer

Answer :

Q is positive when heat is rejected
by the body or system
by

Related questions

A 1-kg steam-water mixture at 1.0 MPa is contained in an inflexible tank. Heat is added until the pressure rises to 3.5 MPa and the temperature to 400°. Determine the heat added.  a) 1378.7 kJ  b) 1348.5 kJ  c) 1278,7 kJ  d) 1246,5 kJ Formula: Q = (h2 – p2v2) –(h1 –p1v1)

Description : A 1-kg steam-water mixture at 1.0 MPa is contained in an inflexible tank. Heat is added until the pressure rises to 3.5 MPa and the temperature to 400°. Determine the heat added.  a) 1378.7 kJ  b) 1348.5 kJ  c) 1278,7 kJ  d) 1246,5 kJ Formula: Q = (h2 – p2v2) –(h1 –p1v1)

Last Answer : 1378.7 kJ

Which of the following relations is not applicable in a free expansion process?  a. Heat is rejected to zero  b. Work done is zero  c. Change in temperature is zero  d. Heat supplied is zero

Description : Which of the following relations is not applicable in a free expansion process?  a. Heat is rejected to zero  b. Work done is zero  c. Change in temperature is zero  d. Heat supplied is zero

Last Answer : Change in temperature is zero

The area under the temperatureentropy curve (T – s curve) of any thermodynamic process represents  A. heat absorbed  B. heat rejected  C. either (a) or (b)  D. none of these

Description : The area under the temperatureentropy curve (T – s curve) of any thermodynamic process represents  A. heat absorbed  B. heat rejected  C. either (a) or (b)  D. none of these

Last Answer :  C. either (a) or (b)

In order that a cycle be reversible, following must be satisfied  (a) free expansion or friction resisted expansion/compression process should not be encountered  (b) when heat is being absorbed, temperature of hot source and working sub¬stance should be same  (c) when beat is being rejected, temperature of cold source and working sub-stance should be same  (d) all of the above  (e) none of the above.

Description : In order that a cycle be reversible, following must be satisfied  (a) free expansion or friction resisted expansion/compression process should not be encountered  (b) when heat is being absorbed, temperature of hot ... sub-stance should be same  (d) all of the above  (e) none of the above.

Last Answer : Answer : d

A perfect gas has a value of R= 319.2 J/ kf.K and k= 1.26. If 120 kJ are added to 2.27 kf\g of this gas at constant pressure when the initial temp is 32.2°C? Find T2.  a. 339.4 K  b. 449.4 K  c. 559.4K  d. 669.4K formula: cp = kR/ k-1 Q= mcp(T2-T1)

Description : A perfect gas has a value of R= 319.2 J/ kf.K and k= 1.26. If 120 kJ are added to 2.27 kf\g of this gas at constant pressure when the initial temp is 32.2°C? Find T2.  a. 339.4 K  b. 449.4 K  c. 559.4K  d. 669.4K formula: cp = kR/ k-1 Q= mcp(T2-T1)

Last Answer : 339.4 K

Which of the following is the work done for a closed reversible isometric system?  a. negative  b. positive  c. zero  d. undefined

Description : Which of the following is the work done for a closed reversible isometric system?  a. negative  b. positive  c. zero  d. undefined

Last Answer : zero

What is the value of the work done for a closed, reversible isometric system?  a. zero  b. positive  c. negative  d. positive or negative

Description : What is the value of the work done for a closed, reversible isometric system?  a. zero  b. positive  c. negative  d. positive or negative

Last Answer : zero

What is the value of the work done for a closed, reversible isometric system?  A. Zero  B. Positive  C. Negative  D. Positive or negative

Description : What is the value of the work done for a closed, reversible isometric system?  A. Zero  B. Positive  C. Negative  D. Positive or negative

Last Answer : Zero

An ideal gas is compresses isothermally. The enthalpy change is  a. Always negative  b. Always positive  c. zero  d. undefined

Description : An ideal gas is compresses isothermally. The enthalpy change is  a. Always negative  b. Always positive  c. zero  d. undefined

Last Answer : zero

What happens to the internal energy of water at reference temperature where enthalpy is zero?  a. Becomes negative  b. Becomes positive  c. Remains constant  d. Cannot be defined

Description : What happens to the internal energy of water at reference temperature where enthalpy is zero?  a. Becomes negative  b. Becomes positive  c. Remains constant  d. Cannot be defined

Last Answer : Becomes negative

The cycle in which heat is supplied at constant volume and rejected at constant pressure is known as

Description : The cycle in which heat is supplied at constant volume and rejected at constant pressure is known as  (a) Dual combustion cycle  (b) Diesel cycle  (c) Atkinson cycle  (d) Rankine cycle  (e) Stirling cycle.

Last Answer : Answer : c

The value for the ΔU of a system is -120 J. If the system is known to have absorbed 420 J of heat, how much work was done?  a. -540 J  b. -640 J  c. -740 J  d. -840 J formula: ΔU = q +w

Description : The value for the ΔU of a system is -120 J. If the system is known to have absorbed 420 J of heat, how much work was done?  a. -540 J  b. -640 J  c. -740 J  d. -840 J formula: ΔU = q +w

Last Answer : -540 J

Let a closed system execute a state change for which the heat is Q = 100 J and work is W = -25 J. Find E. ∆ (Formula: E = Q- W) ∆  a. 125 J  b. 123 J  c. 126 J  d. None of the above

Description : Let a closed system execute a state change for which the heat is Q = 100 J and work is W = -25 J. Find E. ∆ (Formula: E = Q- W) ∆  a. 125 J  b. 123 J  c. 126 J  d. None of the above

Last Answer : 125 J

There are 1.36 kg of gas, for which R = 377 J/kg.k and k = 1.25, that undergo a nonflow constant volume process from p1 = 551.6 kPa and t1 = 60°C to p2 = 1655 kPa. During the process the gas is internally stirred and there are also added 105.5 kJ of heat. Determine t2. (Formula: T2= T1p2/ p1)  a. 999 K  b. 888 K  c. 456 K  d. One of the above

Description : There are 1.36 kg of gas, for which R = 377 J/kg.k and k = 1.25, that undergo a nonflow constant volume process from p1 = 551.6 kPa and t1 = 60°C to p2 = 1655 kPa. During the process the gas is internally stirred and ... (Formula: T2= T1p2/ p1)  a. 999 K  b. 888 K  c. 456 K  d. One of the above

Last Answer : 999 K

The amount of heat energy per kilogram that must be added or removed when a substance changes from one phase to another.  a. specific heat  b. heat of expansion  c. latent heat  d. useful heat

Description : The amount of heat energy per kilogram that must be added or removed when a substance changes from one phase to another.  a. specific heat  b. heat of expansion  c. latent heat  d. useful heat

Last Answer : latent heat

The ______ of a substance is the amount of heat that must be added or removed from a unit mass of the substance to change its temperature by one degree.  A. Latent heat of fusion  B. Molar heat  C. Specific heat capacity  D. Specific heat

Description : The ______ of a substance is the amount of heat that must be added or removed from a unit mass of the substance to change its temperature by one degree.  A. Latent heat of fusion  B. Molar heat  C. Specific heat capacity  D. Specific heat

Last Answer : Specific heat capacity

For same compression ratio and for same heat added  (a) Otto cycle is more efficient than Diesel cycle  (b) Diesel cycle is more efficient than Otto cycle  (c) efficiency depends on other factors  (d) both Otto and Diesel cycles are equally efficient  (e) none of the above.

Description : For same compression ratio and for same heat added  (a) Otto cycle is more efficient than Diesel cycle  (b) Diesel cycle is more efficient than Otto cycle  (c) efficiency depends on other factors  (d) both Otto and Diesel cycles are equally efficient  (e) none of the above.

Last Answer : Answer : a

Ten cu. ft of air at 300psia and 400°F is cooled to 140°F at constant volume. What is the transferred heat?  a.-120Btu  b. -220Btu  c.-320Btu  d. -420Btu formula: Q= mcv(T2-T1)

Description : Ten cu. ft of air at 300psia and 400°F is cooled to 140°F at constant volume. What is the transferred heat?  a.-120Btu  b. -220Btu  c.-320Btu  d. -420Btu formula: Q= mcv(T2-T1)

Last Answer : -420Btu

Water (specific heat cv= 4.2 kJ/ kg ∙ K ) is being heated by a 1500 W h eater. What is the rate of change in temperature of 1kg of the water?  A. 0.043 K/s  B. 0.179 K/s  C. 0.357 K/s  D. 1.50 K/s Formula: Q = mcv ( T)

Description : Water (specific heat cv= 4.2 kJ/ kg ∙ K ) is being heated by a 1500 W h eater. What is the rate of change in temperature of 1kg of the water?  A. 0.043 K/s  B. 0.179 K/s  C. 0.357 K/s  D. 1.50 K/s Formula: Q = mcv ( T)

Last Answer : 0.179 K/s

The heat Q per unit mass per degree change in temperature that must be supplied or removed to change the temperature of a substance.  a. Specific Heat Capacity  b. Latent Heat  c. Heat of Transformation  d. Internal Heat

Description : The heat Q per unit mass per degree change in temperature that must be supplied or removed to change the temperature of a substance.  a. Specific Heat Capacity  b. Latent Heat  c. Heat of Transformation  d. Internal Heat

Last Answer : Specific Heat Capacity

Is the energy in transit (on the move) from the one body or system to another solely because of a temperature between the bodies or systems.  a. Work  b. Heat  c. Energy  d. None of the above

Description : Is the energy in transit (on the move) from the one body or system to another solely because of a temperature between the bodies or systems.  a. Work  b. Heat  c. Energy  d. None of the above

Last Answer : Heat

It is the deposition of radiant energy as heat into an absorbing body.  a. Radiation  b. Ionization  c. Convection  d. Insolation

Description : It is the deposition of radiant energy as heat into an absorbing body.  a. Radiation  b. Ionization  c. Convection  d. Insolation

Last Answer : Insolation

For a body cooling in a draft, the rate of heat loss is proportional to the difference in temperature between the body and its surroundings.  a. Nemst Effect  b. Caloric Theory  c. Joule’s Law  d. Newton’s Law of Cooling

Description : For a body cooling in a draft, the rate of heat loss is proportional to the difference in temperature between the body and its surroundings.  a. Nemst Effect  b. Caloric Theory  c. Joule’s Law  d. Newton’s Law of Cooling

Last Answer : Newton’s Law of Cooling

The theory that heat consisted of a fluid, which could be transferred from one body to another, but not “created” or “destroyed”.  a. Clausius Theorem  b. Caloric Theory  c. Joules Law  d. Newton’s Law of cooling

Description : The theory that heat consisted of a fluid, which could be transferred from one body to another, but not “created” or “destroyed”.  a. Clausius Theorem  b. Caloric Theory  c. Joules Law  d. Newton’s Law of cooling

Last Answer : Caloric Theory

Two thick slices of bread, when completely oxidized by the body, can supply 200,000 cal of heat. How much work is this equivalent to?  a) 4,190,000 joules  b) 8,390,000 joules  c) 839,000 joules  d) 419 000 joules Formula: J =Work/Heat J = mechanical equivalent of heat whose value is 4.19 joules/calorie

Description : Two thick slices of bread, when completely oxidized by the body, can supply 200,000 cal of heat. How much work is this equivalent to?  a) 4,190,000 joules  b) 8,390,000 joules  c) 839, ... d) 419 000 joules Formula: J =Work/Heat J = mechanical equivalent of heat whose value is 4.19 joules/calorie

Last Answer : 419 000 joules

It is impossible for any process to have as its sole result the transfer of heat from a cooler to a hotter body  a. Carnot’s statement  b. Clausius statement  c. Rankine statement  d. Gauss statement

Description : It is impossible for any process to have as its sole result the transfer of heat from a cooler to a hotter body  a. Carnot’s statement  b. Clausius statement  c. Rankine statement  d. Gauss statement

Last Answer : Clausius statement

The statement “heat cannot by itself flow from one body into a hotter body” is governed by _________.  a. the first law of thermodynamics  b. the second law of thermodynamics  c. the third law of thermodynamics  d. the zeroth law of thermodynamics

Description : The statement “heat cannot by itself flow from one body into a hotter body” is governed by _________.  a. the first law of thermodynamics  b. the second law of thermodynamics  c. the third law of thermodynamics  d. the zeroth law of thermodynamics

Last Answer : the second law of thermodynamics

What statement of the second law of thermodynamics states that it is impossible to build a device that operates in a cycle and produces no effect other than the transfer of heat from a lower-temperature body to a higher-temperature body?  A. Kelvin-Planck statement  B. Clausius statement  C. Kelvin statement  D. Rankine statement

Description : What statement of the second law of thermodynamics states that it is impossible to build a device that operates in a cycle and produces no effect other than the transfer of heat from a lower- ... A. Kelvin-Planck statement  B. Clausius statement  C. Kelvin statement  D. Rankine statement

Last Answer : Clausius statement

What law states that it is impossible to build a device that operates in a cycle and produces no effect other than the transfer of heat from a lowertemperature body to a highertemperature body?  A. Zeroth law of thermodynamics  B. First law of thermodynamics  C. Second law of thermodynamics  D. Third law of thermodynamics

Description : What law states that it is impossible to build a device that operates in a cycle and produces no effect other than the transfer of heat from a lowertemperature body to a highertemperature body?  A. ... B. First law of thermodynamics  C. Second law of thermodynamics  D. Third law of thermodynamics

Last Answer : Second law of thermodynamics

When the gas is heated at constant volume, the heat supplied increases the internal energy of the gas.  A.True  B.False

Description : When the gas is heated at constant volume, the heat supplied increases the internal energy of the gas.  A.True  B.False

Last Answer : Answer: A

There is a loss of heat in an irreversible process.  A.True  B.False

Description : There is a loss of heat in an irreversible process.  A.True  B.False

Last Answer : Answer: A

For reversible adiabatic process, change in entropy is  (a) maximum  (b) minimum  (c) zero  (d) unpredictable  (e) negative

Description : For reversible adiabatic process, change in entropy is  (a) maximum  (b) minimum  (c) zero  (d) unpredictable  (e) negative

Last Answer : Answer : c

The condition of perfect vacuum, i.e., absolute zero pressure can be attained at  (a) a temperature of – 273.16°C  (b) a temperature of 0°C  (c) a temperature of 273 °K  (d) a negative pressure and 0°C temperature  (e) can’t be attained.

Description : The condition of perfect vacuum, i.e., absolute zero pressure can be attained at  (a) a temperature of – 273.16°C  (b) a temperature of 0°C  (c) a temperature of 273 °K  (d) a negative pressure and 0°C temperature  (e) can’t be attained.

Last Answer : Answer : a

Workdone in a free expansion process is  A.zero  B.minimum  C.maximum  D.positive

Description : Workdone in a free expansion process is  A.zero  B.minimum  C.maximum  D.positive

Last Answer : Answer: A

Entropy is the measure of:  a. The internal energy of a gas  b. The heat capacity of a substance  c. Randomness or disorder  d. The change of enthalpy of a system

Description : Entropy is the measure of:  a. The internal energy of a gas  b. The heat capacity of a substance  c. Randomness or disorder  d. The change of enthalpy of a system

Last Answer : Randomness or disorder

Is a thermodynamic system that operates continuously with only energy (heat and work) crossing its boundaries?  a. Heat Engine  b. Heat Reservoir  c. Heat Source  d. Heat Sink

Description : Is a thermodynamic system that operates continuously with only energy (heat and work) crossing its boundaries?  a. Heat Engine  b. Heat Reservoir  c. Heat Source  d. Heat Sink

Last Answer : Heat Engine

Sum of the internal energy of a substance and the product of pressure and volume.  a. Specific Heat  b. Specific Gravity  c. Isolated System  d. Enthalpy

Description : Sum of the internal energy of a substance and the product of pressure and volume.  a. Specific Heat  b. Specific Gravity  c. Isolated System  d. Enthalpy

Last Answer : Enthalpy

A system having a rigid boundary that energy, work and mass does not cross its boundaries  a. Specific Heat  b. Specific Gravity  c. Isolated System  d. Enthalpy

Description : A system having a rigid boundary that energy, work and mass does not cross its boundaries  a. Specific Heat  b. Specific Gravity  c. Isolated System  d. Enthalpy

Last Answer : Isolated System

The first law of thermodynamics may be expressed in the following equivalent  a. the net heat transfer id equal to the network  b. the sum of the total energy forms leaving the system boundary is always equal to the energy input  c. energy can neither be created nor destroyed but only converted from one form to another  d. all of the above

Description : The first law of thermodynamics may be expressed in the following equivalent  a. the net heat transfer id equal to the network  b. the sum of the total energy forms leaving the system boundary is ... neither be created nor destroyed but only converted from one form to another  d. all of the above

Last Answer : all of the above

If a system absorbs 500 cal of heat at the same time does 400J of work, find the change in internal energy of the system.  a. 1400 J  b. 1700 J  c. 1900 J  d. 1500 J

Description : If a system absorbs 500 cal of heat at the same time does 400J of work, find the change in internal energy of the system.  a. 1400 J  b. 1700 J  c. 1900 J  d. 1500 J

Last Answer : 1700 J

What refers to the measure of the disorder present in a given substance or system?  A. Enthalpy  B. Entropy  C. Heat capacity  D. Molar heat

Description : What refers to the measure of the disorder present in a given substance or system?  A. Enthalpy  B. Entropy  C. Heat capacity  D. Molar heat

Last Answer : Entropy

What is considered as the heat content of a system?  A. Enthalpy  B. Entropy  C. Internal heat  D. Molar heat

Description : What is considered as the heat content of a system?  A. Enthalpy  B. Entropy  C. Internal heat  D. Molar heat

Last Answer : Enthalpy

What are the only two forms of energy interactions associated with a closed system?  A. Kinetic energy and heat  B. Heat transfer and work  C. Thermal energy and chemical energy  D. Latent energy and thermal energy

Description : What are the only two forms of energy interactions associated with a closed system?  A. Kinetic energy and heat  B. Heat transfer and work  C. Thermal energy and chemical energy  D. Latent energy and thermal energy

Last Answer : Heat transfer and work

A closed system is one in which heat and work crosses the boundary of the system but the mass of the working substance does not crosses the boundary of the system.  A. Yes  B. No

Description : A closed system is one in which heat and work crosses the boundary of the system but the mass of the working substance does not crosses the boundary of the system.  A. Yes  B. No

Last Answer : Answer: A

If a system after undergoing a series of processes, returns to the initial state then  (a) process is thermodynamically in equilibrium  (b) process is executed in closed system cycle  (c) its entropy will change due to irreversibility  (d) sum of heat and work transfer will be zero  (e) no work will be done by the system.

Description : If a system after undergoing a series of processes, returns to the initial state then  (a) process is thermodynamically in equilibrium  (b) process is executed in closed system cycle  (c) its entropy will ... sum of heat and work transfer will be zero  (e) no work will be done by the system.

Last Answer : Answer : d

First law of thermodynamics  (a) enables to determine change in internal energy of the system  (b) does not help to predict whether the system will or not undergo a change  (c) does not enable to determine change in entropy  (d) provides relationship between heat, work and internal energy  (e) all of the above.

Description : First law of thermodynamics  (a) enables to determine change in internal energy of the system  (b) does not help to predict whether the system will or not undergo a change  (c) does not enable ... entropy  (d) provides relationship between heat, work and internal energy  (e) all of the above.

Last Answer : Answer : e

Change in internal energy in a closed system is equal to heat transferred if the reversible process takes place at constant  (a) pressure  (b) temperature  (c) volume  (d) internal energy  (e) entropy.

Description : Change in internal energy in a closed system is equal to heat transferred if the reversible process takes place at constant  (a) pressure  (b) temperature  (c) volume  (d) internal energy  (e) entropy.

Last Answer : Answer : c

Change in enthalpy in a closed system is equal to heat transferred if the reversible process takes place at constant  (a) pressure  (b) temperature  (c) volume  (d) internal energy  (e) entropy.

Description : Change in enthalpy in a closed system is equal to heat transferred if the reversible process takes place at constant  (a) pressure  (b) temperature  (c) volume  (d) internal energy  (e) entropy.

Last Answer : Answer : a