Description : The next stage of monitoring process is to ____ a) study and analyze the data b) obtain a visual representation c) both a & b d) none of the above
Last Answer : both a & b
Description : After collection of what monitoring process starts a) production data. b) visual presentation c) money. d) all of the above
Last Answer : all of the above
Description : An open in the armature of a DC motor is suspected, but is not found by visual inspection of the commutator. The next step in troubleshooting this problem is to ________________. A. conduct a ... windings C. conduct an insulation resistance test of the armature D. test the commutator for a ground
Last Answer : Answer: A
Description : A better appreciation of variation is almost always obtained from a _________ a) visual presentation. b) table of number c) both a & b. d) none of the above
Last Answer : visual presentation
Description : Choose the right sequence for Production Flow Analysis a.PFA Chart - Data Collection - Sortation of process plans b.Data collection - PFA chart - Sortation of process plans c.Sortation of process plans - Data collection - PFA chart d.Data collection - Sortation of process plans - PFA chart
Last Answer : d.Data collection - Sortation of process plans - PFA chart
Description : According to -energy audit means verification, monitoring, analysis of use of energy including submission of technical report containing recommendations for improving energy efficiency with cost benefit analysis ... act 2001 b) Industrial act 1946 c) Factory act 1947 d) none of act
Last Answer : Energy conservation act 2001
Description : Which of the following activity is undertaken immediately after feasibility study and before the requirement analysis and specification phase? A. Project Planning B. Project Monitoring C. Project Control D. Project Scheduling
Last Answer : A. Project Planning
Description : 89. Each vertical bar in cusum status chart represents a) The value of Ci+ and Ci– b) The value of Ci– c) The value of Ci+ d) Neither the value of Ci+ nor Ci–
Last Answer : The value of Ci+ and Ci–
Description : 84. Each vertical bar in cusum status chart represents a) The value of Ci+ and Ci– b) The value of Ci– c) The value of Ci+ d) Neither the value of Ci+ nor Ci–
Description : The energy data entered into____ a) spreadsheet. b) bar chart c) histogram d) all of the above
Last Answer : spreadsheet
Description : Which of the following is not the method of part family formation a.Visual inspection method b.Automatic product sorting c.Parts classification & coding d.Production flow analysis
Last Answer : b.Automatic product sorting
Description : The following is basically a material flow simplification technique a.A simple and visual method of cell design b.Family formation by classification and codification c.Cell formation using Production Flow Analysis d.All of the above
Last Answer : c.Cell formation using Production Flow Analysis
Description : Which of the following technique of grouping does not consider the design and shape aspect? a.A simple and visual method of cell design b.Family formation by classification and codification c.Cell formation using Production Flow Analysis d.All of the above
Description : Product development process after analysis of business next step to be taken is * test marketing penetration marketing one channel marketing individual marketing
Last Answer : test marketing
Description : In the new product development process, after the analysis of business the next step to be taken is A. test marketing B. One channel marketing C. penetration marketing D. individual marketing
Last Answer : A. test marketing
Description : Product development process after analysis of business next step to be taken is A.test marketing B.penetration marketing C.one chanal marketing D.individual marketing Answer:A
Last Answer : A.test marketing
Description : The BALANCED SCORECARD is NOT a tool for monitoring…. A. Financial Perspective B. SWOT Analysis C. People & Process Perspective D. All of these options apply.
Last Answer : SWOT Analysis
Description : For truss analysis, which type of elements is used? a.Triangle b.Parallelogram c.Rectangle d.Bar
Last Answer : d.Bar
Description : The first step in the selling process is 1. preapproach 2. approaching the customer 3. making the presentation 4. overcoming objections 5. prospecting
Last Answer : prospecting
Description : The step-in personal selling process after completion of pre-approach step is called A. prospecting and qualifying B. handling objections C. approach D. presentation and demonstration
Last Answer : C. approach
Description : The third step in personal selling process after completion of pre-approach step is to A. prospecting and qualifying B. handling objections C. approach D. presentation and demonstration
Description : The step or stage of the personal selling process in which the salesperson attempts to make a favorable impression, gather information about the customer's needs and objectives, and build rapport ... called A)prospecting. B)preapproach. C)approach. D)making the presentation. E)overcoming objections.
Last Answer : C)approach.
Description : The first step in the selling process is A)preapproach. B)approaching the customer. C)making the presentation. D)overcoming objections. E)prospecting.
Last Answer : E)prospecting.
Description : One step that is not included in planning a research study is: a. Identifying a researchable problem b. A review of current research c. Statement of the research question d. Conducting a meta-analysis of the research e. Developing a research plan
Last Answer : d. Conducting a meta-analysis of the research
Description : What is Digital Forensic? A. Process of using scientific knowledge in analysis and presentation of evidence in court B. The application of computer science and investigative procedures for a legal ... technology in the investigation and establishment of the facts or evidence in a court of law
Last Answer : B. The application of computer science and investigative procedures for a legal purpose involving the analysis of digital evidence after proper search authority, chain of custody, validation with mathematics, use of validated tools, repeatability, reporting, and possible expert presentation
Description : What is Digital Forensic? a. Process of using scientific knowledge in analysis and presentation of evidence in court b. The application of computer science and investigative procedures for a legal ... technology in the investigation and establishment of the facts or evidence in a court of law
Last Answer : b. The application of computer science and investigative procedures for a legal purpose involving the analysis of digital evidence after proper search authority, chain of custody, validation with mathematics, use of validated tools, repeatability, reporting, and possible expert presentation
Description : What is Digital Forensic? (A) Process of using scientific knowledge in analysis and presentation of evidence in court (B) The application of computer science and investigative procedures for a ... or technology in the investigation and establishment of the facts or evidence in a court of law
Last Answer : (B) The application of computer science and investigative procedures for a legal purpose involving the analysis of digital evidence after proper search authority, chain of custody, validation with mathematics, use of validated tools, repeatability, reporting, and possible expert presentation
Description : you are planning to teach human anatomy in a medical college. Which one of the following is the most suitable teaching aid? Options: A) Put up a chart on human anatomy B) show the students ... the topic D) show the presentation and videos depicting location and functions of parts of the human body
Last Answer : D) show the presentation and videos depicting location and functions of parts of the human body
Description : A 10 years-old child presents with crowding of the dentition and desires correction. What would your next step be: a. Perform mixed dentition analysis. b. Extract the deciduous teeth. c. Ask ... permanent dentition erupts. d. Apply a fixed appliance. e. Review in yearly intervals.
Last Answer : a. Perform mixed dentition analysis.
Description : A 10 years-old child presents with crowding of the dentition and desires correction. What would your next step be: A. Perform mixed dentition analysis B. Extract the deciduous teeth C. Ask ... off and complete permanent dentition erupts D. Apply a fixed appliances E. Review in yearly intervals
Last Answer : A. Perform mixed dentition analysis
Description : What is a visual representation of a project’s planned activities against a calendar called? a. A Gantt chart. b. A critical path network. c. A product flow diagram. d. A Pareto chart.
Last Answer : a. A Gantt chart.
Description : A better appreciation of variations is always obtained from______ a) energy-production relationships b) visual representation c) business process automation d) both A&C are correct
Last Answer : visual representation
Description : Explain the different recording techniques used in method study. Also outline process chart for checking diameter of 50mm of shaft.
Last Answer : Different recording techniques used in method study: Process charts are used to record the data systematically so that none of the information needed for study and analysis is missed. A. Chart indicating ... area. However, there is no indication of the direction or speed of motion.
Description : Which of the following statements about continuous cardiac output monitoring are true? A. Continuous cardiac output monitoring may unmask events not detected by intermittent cardiac output measurements. ... stroke volume by detecting changes in resistance to a small, applied alternating current.
Last Answer : Answer: AD DISCUSSION: Various techniques are available to measure cardiac output continuously. The advantages of continuous cardiac output monitoring, as compared with intermittent methods, are (1) ... function of the stroke volume, which then can be used to calculate the cardiac output
Description : Quality control in the final analysis is : 1. using the technical procedures of monitoring project results to decide if the outputs meet the requirements 2. a production system 3. an inspection system 4. fitness for purpose
Last Answer : 1. using the technical procedures of monitoring project results to decide if the outputs meet the requirements
Description : Which of the following is not a part of energy audit as per the Energy Conservation Act, 2001? a) monitoring and analysis of energy use b) verification of energy use c) submission of technical report with recommendations d) ensuring implementation of recommended measures followed by review
Last Answer : d) ensuring implementation of recommended measures followed by review
Description : The most effective method of locating a loose commutator bar in a D.C. motor is by _____________. A. visual inspection B. jiggling each by hand C. sounding each bar with a light weight hammer D. checking with a calibrated torque wrench
Last Answer : Answer: C
Description : Periodic testing by a shoreside support technician using a special camera which can detect potentially dangerous loose or corroded bus bar and controller connections is termed ______________. A. heat sensitive thermography B. visual pyrotronics C. corrosion electrolysis D. electric vibroanalysis
Description : The step of research workshop is Options: A) The presentation and explanation of the topic B) The practice of following an approach C) Follow-up and evaluation of a topic D) All of the above
Last Answer : D) All of the above
Description : Which of the following is fast step of teaching? Options: A) Presentation B) Application C) Comparison D) Generalization
Last Answer : B) Application
Description : Arrange the following activities of interaction in logical order (i) Analysis of the work done (ii) Planning and preparation (iii) Presentation of material (iv) Modification and improvement (a) (0 (ii), (Hi), (iv) (b) (ii), (Hi), (i), (iv) (c) (iv). (/), (ii), (Hi) (d) (i), (Hi), (iv). (ii)
Last Answer : (b) (ii), (Hi), (i), (iv)
Description : Interpretation means (a) Explanation of meaning and significance of the data in Financial Statements. (b) Concerned with preparation and presentation of classified data (c) Systematic analysis of recorded data (d) Methodical classification of data given in Financial Statements
Last Answer : (a) Explanation of meaning and significance of the data in Financial Statements.
Description : The M & T system stand for a) Market and Trading system b) Monitoring and Targeting system c) Market and Targeting System d) None of the above
Last Answer : Monitoring and Targeting system
Description : The tool used for performance assessment and logical evaluation of avenues for improvement in Energy management and audit is a) Fuel substitution c) Energy pricing b) Monitoring and verification d) Bench marking
Last Answer : Bench marking
Description : The tool used for performance assessment and logical evaluation of avenues for improvement in Energy management and audit is a) Fuel substitution b) Monitoring and verification c) Energy pricing d) Bench marking 23. Infrared thermometer is used
Description : Monitoring and targeting programs have been so effective that they show typical reductions in annual energy cost in the various industrial sectors between………. a. 10 to 30 % c. 5 to 20% b. 5 to 10 % d. 5 to 30%
Last Answer : 5 to 20%
Description : Energy monitoring and techniques builds on the principle of ―you can manage what you measure‖. a. true b. false
Last Answer : false