84. Each vertical bar in cusum status chart represents a) The value of Ci+ and Ci– b) The value of Ci– c) The value of Ci+ d) Neither the value of Ci+ nor Ci–

84.    Each vertical bar in cusum status chart represents     
a) The value of Ci+ and Ci–    b) The value of Ci–
c) The value of Ci+    d) Neither the value of Ci+ nor Ci–
by

1 Answer

Answer :

The value of Ci+ and Ci–
by

Related questions

89. Each vertical bar in cusum status chart represents a) The value of Ci+ and Ci– b) The value of Ci– c) The value of Ci+ d) Neither the value of Ci+ nor Ci–

Description : 89. Each vertical bar in cusum status chart represents a) The value of Ci+ and Ci– b) The value of Ci– c) The value of Ci+ d) Neither the value of Ci+ nor Ci–

Last Answer : The value of Ci+ and Ci–

85. The value of K and H should be determined according to the ARL required for the corresponding cusum chart. a) True b) False

Description : 85. The value of K and H should be determined according to the ARL required for the corresponding cusum chart. a) True b) False

Last Answer : true

102. To draw a CUSUM chart following data is required a) Monthly energy consumption& monthly production b) Monthly specific energy consumption and turn over c) Monthly profits and production d) None

Description : 102. To draw a CUSUM chart following data is required a) Monthly energy consumption& monthly production b) Monthly specific energy consumption and turn over c) Monthly profits and production d) None

Last Answer : Monthly energy consumption& monthly production

67. To draw a CUSUM chart following data is required a) Monthly energy consumption& monthly production b) Monthly specific energy consumption and turn over c) Monthly profits and production d) None

Description : 67. To draw a CUSUM chart following data is required a) Monthly energy consumption& monthly production b) Monthly specific energy consumption and turn over c) Monthly profits and production d) None

Last Answer : Monthly energy consumption& monthly production

As per the case study of the CUSUM technique energy consumption and the production data were collected for plant over a period of months. a. 20. c. 19 b. 6. d. 18

Description : As per the case study of the CUSUM technique energy consumption and the production data were collected for plant over a period of months. a. 20. c. 19 b. 6. d. 18

Last Answer : 18

108. is primarily a management technique that uses energy information as a basis to eliminate waste, reduce and control current level of energy use and improve the existing operating procedures. a) Energy monitoring and targeting b) CUSUM c) Specific energy consumption d) Production

Description : 108.is primarily a management technique that uses energy information as a basis to eliminate waste, reduce and control current level of energy use and improve the existing operating procedures. a) Energy monitoring and targeting b) CUSUM c) Specific energy consumption d) Production

Last Answer : Energy monitoring and targeting

As per the case study of the CUSUM technique energy consumption and the production data were collected for plant over a period of months. a. 20. c. 19 b. 6. d. 18

Description : 96.As per the case study of the CUSUM technique energy consumption and the production data were collected for plant over a period of months. a. 20. c. 19 b. 6. d. 18

Last Answer : 18

86. To apply Shewhart-cusum combined procedure, the Shewhart control limits should be applied almost standard deviation from the center. a) 2 b) 1 c) 1.5 d) 3.5

Description : 86. To apply Shewhart-cusum combined procedure, the Shewhart control limits should be applied almost standard deviation from the center. a) 2 b) 1 c) 1.5 d) 3.5

Last Answer : 2

CUSUM technique provides __________ a) Deployment. b) Maintenance c) Development. d) Trend line

Description : CUSUM technique provides __________ a) Deployment. b) Maintenance c) Development. d) Trend line

Last Answer : Trend line

CUSUM stands for __________ a) Constant summation. b) Current sums c) Control construction d) Cumulative sum

Description : CUSUM stands for __________ a) Constant summation. b) Current sums c) Control construction d) Cumulative sum

Last Answer : Cumulative sum

82. After the value of Ci– increasing than the value of the process is said to be out-of-control. a) Control interval b) Decision interval c) Distribution interval d) Calculation interval

Description : 82. After the value of Ci– increasing than the value of the process is said to be out-of-control. a) Control interval b) Decision interval c) Distribution interval d) Calculation interval

Last Answer : Control interval

The …………………... option tells netstat to display the status of all configured network interfaces. A. -n B. -i C. either a or b D. neither a nor b

Description : The …………………... option tells netstat to display the status of all configured network interfaces. A. -n B. -i C. either a or b D. neither a nor b

Last Answer : B. -i

The energy data entered into____ a) spreadsheet. b) bar chart c) histogram d) all of the above

Description : The energy data entered into____ a) spreadsheet. b) bar chart c) histogram d) all of the above

Last Answer : spreadsheet

what is the next step of monitoring process? a) visual presentation. b) Bar chart c) study and analysis. d) none of the above

Description : what is the next step of monitoring process? a) visual presentation. b) Bar chart c) study and analysis. d) none of the above

Last Answer : bar chart

For a longitudinal reinforcing bar in a column, the minimum cover shall neither be less than the diameter of bar nor less than (A) 15 mm (B) 25 mm (C) 30 mm (D) 40 mm

Description : For a longitudinal reinforcing bar in a column, the minimum cover shall neither be less than the diameter of bar nor less than (A) 15 mm (B) 25 mm (C) 30 mm (D) 40 mm

Last Answer : Answer: Option D

The minimum cover in a slab should neither be less than the diameter of bar nor less than (A) 10 mm (B) 15 mm (C) 25 mm (D) 13 m

Description : The minimum cover in a slab should neither be less than the diameter of bar nor less than (A) 10 mm (B) 15 mm (C) 25 mm (D) 13 mm

Last Answer : Answer: Option B

Explain the following a) Dry Bulb Temperature and Wet bulb Temperature b) Maximum Demand and Power Factor c) Gross Calorific Value & Net Calorific Value d) 5S & Return of Investment (ROI) e) CUSUM

Description : Explain the following a) Dry Bulb Temperature and Wet bulb Temperature b) Maximum Demand and Power Factor c) Gross Calorific Value & Net Calorific Value d) 5S & Return of Investment (ROI) e) CUSUM

Last Answer : a) Dry Bulb Temperature and Wet bulb Temperature Dry bulb Temperature is an indication of the sensible heat content of air-water vapour  mixtures Wet bulb Temperature is a measure of ... of capital cost. This is a broad indicator of the annual return expected from initial capital investment

In vertical conveyor reaper, the crop to be harvested are guided by a) Star wheel b) Reel c) Row divider d) Cutter bar

Description : In vertical conveyor reaper, the crop to be harvested are guided by a) Star wheel b) Reel c) Row divider d) Cutter bar

Last Answer : Star wheel

STL file consists of which of the following format? a.ASCII b.Binary c.Both A & B d.Neither A nor B

Description : STL file consists of which of the following format? a.ASCII b.Binary c.Both A & B d.Neither A nor B

Last Answer : c.Both A & B

The objects transformed using the equation P’=S*P should be a.Scaled b.Repositioned c.Both a and b d.Neither a nor b

Description : The objects transformed using the equation P’=S*P should be a.Scaled b.Repositioned c.Both a and b d.Neither a nor b

Last Answer : c.Both a and b

The translation distances (dx, dy) is called as a.Translation vector b.Shift vector c.Both a and b d.Neither a nor b

Description : The translation distances (dx, dy) is called as a.Translation vector b.Shift vector c.Both a and b d.Neither a nor b

Last Answer : c.Both a and b

Cooling tower is a ______device a) Heat absorption b) heat rejection c) Both a and b c) neither a nor b

Description : Cooling tower is a ______device a) Heat absorption b) heat rejection c) Both a and b c) neither a nor b

Last Answer : heat rejection

Energy can neither created nor destroyed. It can only change forms.  a. Conservation of Mass Principle  b. Conservation of Energy Principle  c. Conservation of Momentum Principle  d. Conservation of Heat Principle

Description : Energy can neither created nor destroyed. It can only change forms.  a. Conservation of Mass Principle  b. Conservation of Energy Principle  c. Conservation of Momentum Principle  d. Conservation of Heat Principle

Last Answer : Conservation of Energy Principle

What system in which neither mass nor energy cross the boundaries and is not influenced by the surroundings?  a. Closed system  b. Open system  c. Isolated system  d. All of these

Description : What system in which neither mass nor energy cross the boundaries and is not influenced by the surroundings?  a. Closed system  b. Open system  c. Isolated system  d. All of these

Last Answer : Isolated system

It states that mass is a commodity that can neither be heated nor destroyed with the exception of nuclear processes where the conversion of mass into energy is a fundamental principle  a. Law of Conservation of Mass  b. Law of Conservation of Energy  c. Law of Conservation of Power  d. Law of Conservation of Heat

Description : It states that mass is a commodity that can neither be heated nor destroyed with the exception of nuclear processes where the conversion of mass into energy is a fundamental principle  a. Law of ... Conservation of Energy  c. Law of Conservation of Power  d. Law of Conservation of Heat

Last Answer : Law of Conservation of Mass

The first law of thermodynamics may be expressed in the following equivalent  a. the net heat transfer id equal to the network  b. the sum of the total energy forms leaving the system boundary is always equal to the energy input  c. energy can neither be created nor destroyed but only converted from one form to another  d. all of the above

Description : The first law of thermodynamics may be expressed in the following equivalent  a. the net heat transfer id equal to the network  b. the sum of the total energy forms leaving the system boundary is ... neither be created nor destroyed but only converted from one form to another  d. all of the above

Last Answer : all of the above

Energy can neither be created nor destroyed but can be converted from one form to other is inferred from  (a) zeroth low of thermodynamic  (b) first law of thermodynamics  (c) second law to thermodynamics  (d) basic law of thermodynamics  (e) claussius statement.

Description : Energy can neither be created nor destroyed but can be converted from one form to other is inferred from  (a) zeroth low of thermodynamic  (b) first law of thermodynamics  (c) second law to thermodynamics  (d) basic law of thermodynamics  (e) claussius statement.

Last Answer : Answer : b

An isolated system is one in which  (a) mass does not cross boundaries of the system, though energy may do so  (b) neither mass nor energy crosses the boundaries of the system  (c) both energy and mass cross the boundaries of the system  (d) mass crosses the boundary but not the energy  (e) thermodynamic reactions do not occur.

Description : An isolated system is one in which  (a) mass does not cross boundaries of the system, though energy may do so  (b) neither mass nor energy crosses the boundaries of the system  (c) both ... system  (d) mass crosses the boundary but not the energy  (e) thermodynamic reactions do not occur.

Last Answer : Answer : b

An open system is one in which  (a) mass does not cross boundaries of the system, though energy may do so  (b) neither mass nor energy crosses the boundaries of the system  (c) both energy and mass cross the boundaries of the system  (d) mass crosses the boundary but not the energy  (e) thermodynamic reactions do not occur.

Description : An open system is one in which  (a) mass does not cross boundaries of the system, though energy may do so  (b) neither mass nor energy crosses the boundaries of the system  (c) both energy ... system  (d) mass crosses the boundary but not the energy  (e) thermodynamic reactions do not occur.

Last Answer : Answer : c

A closed system is one in which  (a) mass does not cross boundaries of the system, though energy may do so  (b) mass crosses the boundary but not the energy (c) neither mass nor energy crosses the boundaries of the system  (d) both energy and mass cross the boundaries of the system  (e) thermodynamic reactions take place.

Description : A closed system is one in which  (a) mass does not cross boundaries of the system, though energy may do so  (b) mass crosses the boundary but not the energy (c) neither mass nor energy ...  (d) both energy and mass cross the boundaries of the system  (e) thermodynamic reactions take place.

Last Answer : Answer : a

What is Decision Tree? a) Flow-Chart b) Structure in which internal node represents test on an attribute, each branch represents outcome of test and each leaf node represents class label c) Flow-Chart & Structure in which internal node represents test on an attribute, each branch represents outcome of test and each leaf node represents class label d) None of the mentioned

Description : What is Decision Tree? a) Flow-Chart b) Structure in which internal node represents test on an attribute, each branch represents outcome of test and each leaf node represents class label c) ... branch represents outcome of test and each leaf node represents class label d) None of the mentioned

Last Answer : c) Flow-Chart & Structure in which internal node represents test on an attribute, each branch represents outcome of test and each leaf node represents class label

This/These Management Guru/s, formulated a bar chart that measures planned and completed work along each stage of project A. Frederick Taylor B. Henry Gantt C. Frank and Lillian Gilbreth D. Henri Fayol

Description : This/These Management Guru/s, formulated a bar chart that measures planned and completed work along each stage of project A. Frederick Taylor B. Henry Gantt C. Frank and Lillian Gilbreth D. Henri Fayol

Last Answer : Henry Gant

This/These Management Guru/s, formulated a bar chart that measures planned and completed work along each stage of project A. Frederick Taylor B. Henry Gantt C. Frank and Lillian Gilbreth D. Henri Fayol

Description : This/These Management Guru/s, formulated a bar chart that measures planned and completed work along each stage of project A. Frederick Taylor B. Henry Gantt C. Frank and Lillian Gilbreth D. Henri Fayol

Last Answer : Henry Gantt

Pick up the incorrect statement from the following: (A) The various functions under each activity, are shown by one bar on Bar Charts (B) Bar chart establishes the interdependency of one event on another (C) Only approximate percentage of the completed work is reported (D) None of these

Description : Pick up the incorrect statement from the following: (A) The various functions under each activity, are shown by one bar on Bar Charts (B) Bar chart establishes the interdependency of one event on another (C) Only approximate percentage of the completed work is reported (D) None of these

Last Answer : (B) Bar chart establishes the interdependency of one event on another

The prime importance of these is to educate and inform consumers about how energy efficient each product is ? a) Efficiency chart c) Both a & b b) Star Rating d) None of the above

Description : The prime importance of these is to educate and inform consumers about how energy efficient each product is ? a) Efficiency chart c) Both a & b b) Star Rating d) None of the above

Last Answer : Star Rating

is a statistical technique which determines and quantifies the relationship between variables and enables standard equations to be established for energy consumption. a) linear regression analysis b) time-dependent energy analysis c) moving annual total d) CUSUM

Description : is a statistical technique which determines and quantifies the relationship between variables and enables standard equations to be established for energy consumption. a) linear regression analysis b) time-dependent energy analysis c) moving annual total d) CUSUM

Last Answer : a) linear regression analysis

An RG-11/U foam coaxial cable has a maximum voltage standing wave of 52 V and a minimum voltage of 17 V. Find the value of the resistive load. A. 24.59Ω B. Either A or C C. 228.75Ω D. Neither A nor C

Description : An RG-11/U foam coaxial cable has a maximum voltage standing wave of 52 V and a minimum voltage of 17 V. Find the value of the resistive load. A. 24.59Ω B. Either A or C C. 228.75Ω D. Neither A nor C

Last Answer : B. Either A or C

In a packed absorption tower, if the equilibrium and operating lines are both straight lines, then the ratio, HETP/HTUOG __________ the absorption factor. (A) Increases with increase in (B) Is one at unity value of (C) Both (A) and (B) (D) Neither (A) nor (B)

Description : In a packed absorption tower, if the equilibrium and operating lines are both straight lines, then the ratio, HETP/HTUOG __________ the absorption factor. (A) Increases with increase in (B) Is one at unity value of (C) Both (A) and (B) (D) Neither (A) nor (B)

Last Answer : (C) Both (A) and (B)

In a packed tower, the value of HETP equals HTUOG, when the equilibrium and the operating lines are (where, HETP = height equivalent to a theoretical plate HTUOG = overall gas phase height of a transfer unit). (A) Straight (B) Parallel (C) Both (A) & (B) (D) Neither (A) nor (B

Description : In a packed tower, the value of HETP equals HTUOG, when the equilibrium and the operating lines are (where, HETP = height equivalent to a theoretical plate HTUOG = overall gas phase height of a transfer unit). (A) Straight (B) Parallel (C) Both (A) & (B) (D) Neither (A) nor (B

Last Answer : (C) Both (A) & (B)

In______, the changeor lackof change in the level of the voltagedetermines the value of the bit. A) NRZ-I B) NRZ-L C) both (a)and (b) D) neither (a) nor (b)

Description : In______, the changeor lackof change in the level of the voltagedetermines the value of the bit. A) NRZ-I B) NRZ-L C) both (a)and (b) D) neither (a) nor (b)

Last Answer : NRZ-I

Coke oven gas produced by high temperature carbonisation of coal (as compared to that produced by low temperature carbonisation), has (A) Higher calorific value (B) Lower hydrogen content (C) Both (A) and (B) (D) Neither (A) nor (B)

Description : Coke oven gas produced by high temperature carbonisation of coal (as compared to that produced by low temperature carbonisation), has (A) Higher calorific value (B) Lower hydrogen content (C) Both (A) and (B) (D) Neither (A) nor (B)

Last Answer : (D) Neither (A) nor (B)

With increase in the oxygen content of the coal, its __________ decreases. (A) Calorific value (B) Caking power (C) Both (A) & (B) (D) Neither (A) nor (B)

Description : With increase in the oxygen content of the coal, its __________ decreases. (A) Calorific value (B) Caking power (C) Both (A) & (B) (D) Neither (A) nor (B)

Last Answer : (C) Both (A) & (B)

Bomb calorimeter can be used to determine the __________ of the coal. (A) Sulphur content (B) Calorific value (C) Both (A) & (B) (D) Neither (A) nor (B)

Description : Bomb calorimeter can be used to determine the __________ of the coal. (A) Sulphur content (B) Calorific value (C) Both (A) & (B) (D) Neither (A) nor (B)

Last Answer : (C) Both (A) & (B)

Sulphur in metallurgical coal (A) Contributes to its heating value (B) Affects the quality of steel produced as cracks develop on the surface while rolling the steel (C) Both (A) and (B) (D) Neither (A) nor (B)

Description : Sulphur in metallurgical coal (A) Contributes to its heating value (B) Affects the quality of steel produced as cracks develop on the surface while rolling the steel (C) Both (A) and (B) (D) Neither (A) nor (B)

Last Answer : (C) Both (A) and (B)

The value of gas constant 'R' is (A) 1.987 cal/gm mole °K (B) 1.987 BTU/lb. mole °R (C) Both (A) and (B)(D) Neither (A) nor (B)

Description : The value of gas constant 'R' is (A) 1.987 cal/gm mole °K (B) 1.987 BTU/lb. mole °R (C) Both (A) and (B) (D) Neither (A) nor (B)

Last Answer : (C) Both (A) and (B)

Which among these is a factor affecting business Environment? A. Value System B. Human Resources C. Both (A) and (B) D. Neither (A) nor (B.

Description : Which among these is a factor affecting business Environment? A. Value System B. Human Resources C. Both (A) and (B) D. Neither (A) nor (B.

Last Answer : C. Both (A) and (B)

If one of the contraries is false the truth-value of the other is A) true B) false C) doubtful D) neither true nor false.

Description :  If one of the contraries is false the truth-value of the other is A) true B) false C) doubtful D) neither true nor false. 

Last Answer : C) doubtful 

If one of the contraries is true the truth-value of the other is A) true B) false C) neither true nor false D) both true and false.

Description : If one of the contraries is true the truth-value of the other is A) true B) false C) neither true nor false  D) both true and false.  

Last Answer : B) false

The horizontal line in psychrometric chart joining the change of state of air represents A. humidification B. sensible cooling or heating C. sensible cooling or heating with humidification D. sensible cooling or heating with dehumidification

Description : The horizontal line in psychrometric chart joining the change of state of air represents A. humidification B. sensible cooling or heating C. sensible cooling or heating with humidification D. sensible cooling or heating with dehumidification

Last Answer : ANSWER : B

Which of the following statement is true? A. the chart is plotted for pressure equal to 760mm Hg B. the constant wbt line represents adiabatic saturation process C. the constant wbt line coincides with constant enthalpy line D. all of the mentioned

Description : Which of the following statement is true? A. the chart is plotted for pressure equal to 760mm Hg B. the constant wbt line represents adiabatic saturation process C. the constant wbt line coincides with constant enthalpy line D. all of the mentioned

Last Answer : ANSWER : D