is the application of sprayer. a) To break the liquid droplet of effective size b) To distribute them uniformly event plants c) To regulate amount of liquid to avoid excessive application. d) All above them

is the application of sprayer. a) To break the liquid droplet of effective size b) To distribute them uniformly event plants c) To regulate amount of liquid to avoid excessive application. d) All above them
by

1 Answer

Answer :

All above them
by

Related questions

Ultra low volume sprayer consist of high spinning disc which makes droplet size a. 50 -100mm. b 40-100mm. c.35-100mm. d. None of above

Description : Ultra low volume sprayer consist of high spinning disc which makes droplet size a. 50 -100mm. b 40-100mm. c.35-100mm. d. None of above

Last Answer : Ans- c. 35-100mm.

Which altra low volume sprayer is used for controlled droplet application a). Herbi sprayer b). Micron herbi sprayer c). Both a and b d). None of these

Description : Which altra low volume sprayer is used for controlled droplet application a). Herbi sprayer b). Micron herbi sprayer c). Both a and b d). None of these

Last Answer : c). Both a and b

Water lost in form of liquid droplet is called as ______________ a) Drift b) water loss c) Water evaporation d) none of the above

Description : Water lost in form of liquid droplet is called as ______________ a) Drift b) water loss c) Water evaporation d) none of the above

Last Answer : Drift

Steel Tank in the power sprayer is used to avoid a) Moisturisation b) Corrosion c) Leakages d) Stability

Description : Steel Tank in the power sprayer is used to avoid a) Moisturisation b) Corrosion c) Leakages d) Stability

Last Answer : Corrosion

Consider the following statements. The role of the gravel bed in a rapid sand filter is : 1. To filter out large suspended matter 2. To support the sand bed above it 3. To prevent the escape of sand particles 4. To uniformly distribute the backwash water 5. To prevent algae growth Which of the following statements are correct ? a) 1, 2, 3, 4 and 5 b) 2, 3 and 4 only c) 3, 4 and 5 only d) 1, 2 and 3 only

Description : Consider the following statements. The role of the gravel bed in a rapid sand filter is : 1. To filter out large suspended matter 2. To support the sand bed above it 3. To prevent the escape of sand particles 4. To uniformly ... and 5 b) 2, 3 and 4 only c) 3, 4 and 5 only d) 1, 2 and 3 only

Last Answer : b) 2, 3 and 4 only

The purpose of transverse reinforcement, in a slab is to (a) Distribute the effect to f point load on the slab more evenly and uniformly (b) Distribute the shrinkage and temp cracks more ever (c) Keep the main reinforcement in position (d) All of the above.

Description : The purpose of transverse reinforcement, in a slab is to (a) Distribute the effect to f point load on the slab more evenly and uniformly (b) Distribute the shrinkage and temp cracks more ever (c) Keep the main reinforcement in position (d) All of the above.

Last Answer : (d) All of the above.

The function of fuse in an electrical circuit is (a) avoid electric shocks (b) regulate the flow of current (c) break the circuit in case of overloading or short circuiting (d) switch off current

Description : The function of fuse in an electrical circuit is (a) avoid electric shocks (b) regulate the flow of current (c) break the circuit in case of overloading or short circuiting (d) switch off current

Last Answer : Ans:(c)

The pressure outside a bubble/droplet of liquid is __________ the internal pressure. (A) Greater than (B) Less than (C) Equal to (D) Unpredictable; depends on the bubble size

Description : The pressure outside a bubble/droplet of liquid is __________ the internal pressure. (A) Greater than (B) Less than (C) Equal to (D) Unpredictable; depends on the bubble size

Last Answer : Option B

swirl plate in the cone nozzle is provided to. a. Impart rotational motion to the liquid passing through it. b. To increase the droplet size. c. To decrease the droplet size. d. To increase the spray angle.

Description : swirl plate in the cone nozzle is provided to. a. Impart rotational motion to the liquid passing through it. b. To increase the droplet size. c. To decrease the droplet size. d. To increase the spray angle.

Last Answer : a. Impart rotational motion to the liquid passing through it.

are the application of pedal sprayer a) Row crops b) Vegetables c) Nursery stocks d) Tall crops

Description : are the application of pedal sprayer a) Row crops b) Vegetables c) Nursery stocks d) Tall crops

Last Answer : Tall crops

Which one of the following RP technologies uses solid sheet stock as the starting material? a.Droplet deposition manufacturing b.Fused-deposition modeling c.Laminated-Object Manufacturing d.Selective Laser Sintering

Description : Which one of the following RP technologies uses solid sheet stock as the starting material? a.Droplet deposition manufacturing b.Fused-deposition modeling c.Laminated-Object Manufacturing d.Selective Laser Sintering

Last Answer : c.Laminated-Object Manufacturing

Which of the following RP technologies uses powders as the starting material? a.Droplet Deposition Manufacturing b.Fused-Deposition Modeling c.Selective Laser Sintering d.Stereolithography

Description : Which of the following RP technologies uses powders as the starting material? a.Droplet Deposition Manufacturing b.Fused-Deposition Modeling c.Selective Laser Sintering d.Stereolithography

Last Answer : c.Selective Laser Sintering

In the context of rapid prototyping and additive manufacturing, tessellation refers to theprocess of slicing the CAD model of the part into layers. a.Droplet Deposition Manufacturing b.Used-Deposition Modeling c.Laminated-Object Manufacturing d.Stereolithography

Description : In the context of rapid prototyping and additive manufacturing, tessellation refers to theprocess of slicing the CAD model of the part into layers. a.Droplet Deposition Manufacturing b.Used-Deposition Modeling c.Laminated-Object Manufacturing d.Stereolithography

Last Answer : d.Stereolithography

For a given application rate the number of droplet is inversely proportional to............of the diameter of droplets. A) Square b) cube C) one fifth d) none of the above

Description : For a given application rate the number of droplet is inversely proportional to............of the diameter of droplets. A) Square b) cube C) one fifth d) none of the above

Last Answer : b) cube

Gage pressure within a spherical droplet of a fluid is 'p'. What will be gage pressure within a bubble of the same size & of the same fluid? (A) p (B) 2 p (C) 0.5 p (D) 0.25 p

Description : Gage pressure within a spherical droplet of a fluid is 'p'. What will be gage pressure within a bubble of the same size & of the same fluid? (A) p (B) 2 p (C) 0.5 p (D) 0.25 p

Last Answer : (B) 2 p

. Herbicide spray drift can be reduced by a). Increasing the droplet size b). Forming a foam c). Making invert emulsion d). All of these

Description : . Herbicide spray drift can be reduced by a). Increasing the droplet size b). Forming a foam c). Making invert emulsion d). All of these

Last Answer : d). All of these

In a sprayer overlapping can be increased by increasing a) Nozzle diameter b) Pressure c) Discharge d) Height of nozzle Ans. d

Description : In a sprayer overlapping can be increased by increasing a) Nozzle diameter b) Pressure c) Discharge d) Height of nozzle Ans. d

Last Answer : ans d

Battery operated sprayer consists of 10 lit capacity tank and rechargeable battery. b. 10 Volt c. 12 Volt. d. None of above Ans- a. 6 Volt

Description : Battery operated sprayer consists of 10 lit capacity tank and rechargeable battery. b. 10 Volt c. 12 Volt. d. None of above Ans- a. 6 Volt

Last Answer : Ans-    a. 6 Volt

Motorized Knapsack sprayer powered by a. petrol engine. b. Diesel engine. c. gas engine. d. None of above

Description : Motorized Knapsack sprayer powered by a. petrol engine. b. Diesel engine. c. gas engine. d. None of above

Last Answer : Ans-   a. petrol engine.

Motorized Knapsack sprayer develops pressure below a. 3.5 kg/cm2b. 2.5 kg/cm2 d. None of above

Description : Motorized Knapsack sprayer develops pressure below a. 3.5 kg/cm2b. 2.5 kg/cm2 d. None of above

Last Answer : Ans-   c. 1.5 kg/cm2  

Foot or pedal operated sprayer develops pressure a. 14 to 18kg/cm2 b. 15 to 21 kg/cm2 d. None of above

Description : Foot or pedal operated sprayer develops pressure a. 14 to 18kg/cm2 b. 15 to 21 kg/cm2 d. None of above

Last Answer : Ans-   c. 17 to 21 kg/cm2

Rocker sprayer and Foot or pedal operated sprayer a. have small built tank b. have big built tank d. None of above

Description : Rocker sprayer and Foot or pedal operated sprayer a. have small built tank b. have big built tank d. None of above

Last Answer : Ans- c. does not have in built tank and separate spray tank is necessary.    

Rocker sprayer develops pressure b. 15 to 20kg/cm2 c. 15 to 25 kg/cm2 d. None of above

Description : Rocker sprayer develops pressure b. 15 to 20kg/cm2 c. 15 to 25 kg/cm2 d. None of above

Last Answer : Ans-   a. 14 to 18kg/cm2

Knapsack hand compression sprayer covers b. 1-2 ha/day c. 1-3 ha/day d. None of above

Description : Knapsack hand compression sprayer covers b. 1-2 ha/day c. 1-3 ha/day d. None of above

Last Answer : Ans-    a. 0.5-1 ha/day.

Knapsack hand compression sprayer has flat or bean shaped tank designed to fit comfortably on the ............of the operator. a. hand. b. leg. c. back. d. None of above

Description : Knapsack hand compression sprayer has flat or bean shaped tank designed to fit comfortably on the ............of the operator. a. hand. b. leg. c. back. d. None of above

Last Answer : Ans- c. back.

Hand compression sprayer , the pumping is required to maintain the normal pressure of a. 1-3.5kg/cm2.. b. 1.5-3.5kg/cm2. d. None of above

Description : Hand compression sprayer , the pumping is required to maintain the normal pressure of a. 1-3.5kg/cm2.. b. 1.5-3.5kg/cm2. d. None of above

Last Answer : Ans- c. 2-3.5kg/cm2.

A tank capacity of knapsack sprayer is about: a. 5-10 litres c) 9-22.5 litres b. 8-10 litres d) 10-25.5 litres

Description : A tank capacity of knapsack sprayer is about: a. 5-10 litres c) 9-22.5 litres b. 8-10 litres d) 10-25.5 litres

Last Answer : 9-22.5 litres

Bucket type sprayer consist of: i) Single and double acting pump c) Plunger type pump j) Centrifugal pump d) All are correct

Description : Bucket type sprayer consist of: i) Single and double acting pump c) Plunger type pump j) Centrifugal pump d) All are correct

Last Answer : Single and double acting pump

In power-operated sprayer, the pump works at a pressure of: A. 2-5 Kg/cm2 B. 3-8.5 Kg/cm2 C. 4-12 Kg/cm2. D. 5-15 Kg/cm2

Description : In power-operated sprayer, the pump works at a pressure of: A. 2-5 Kg/cm2 B. 3-8.5 Kg/cm2 C. 4-12 Kg/cm2. D. 5-15 Kg/cm2

Last Answer : 3-8.5 Kg/cm2

he pump is used in power-operated sprayer is: A. Plunger type B. Diaphragm type C. Gear type D. Piston type

Description : The pump is used in power-operated sprayer is: A. Plunger type B. Diaphragm type C. Gear type D. Piston type

Last Answer : Gear type

Tank capacity of compression sprayer is: A. 10 litres B. 12 litres C. 14 litres D. 20 litres

Description : Tank capacity of compression sprayer is: A. 10 litres B. 12 litres C. 14 litres D. 20 litres

Last Answer : 14 litres

A tank capacity of knapsack sprayer is about: A. 5-10 litres B. 8-10 litres C. 9-22.5 litres D. 10-25.5 litres

Description : A tank capacity of knapsack sprayer is about: A. 5-10 litres B. 8-10 litres C. 9-22.5 litres D. 10-25.5 litres

Last Answer : 10-25.5 litres

Bucket type sprayer consist of: A. Single and double acting pump B. Centrifugal pump C. Plunger type pump D. All are correct

Description : Bucket type sprayer consist of: A. Single and double acting pump B. Centrifugal pump C. Plunger type pump D. All are correct

Last Answer : Single and double acting pump

A Power sprayer essentially consists of: a) Tank a) Agitator b) Pressure Gauge c) All of the above

Description : A Power sprayer essentially consists of: a) Tank a) Agitator b) Pressure Gauge c) All of the above

Last Answer : All of the above

Motorized knapsack sprayer are powered by - HP petrol engine. a) 1.2 to 3.2 b) 2.2 to 3.4 c) 0.2 to 3.2 d) 1.2 to 3.0

Description : Motorized knapsack sprayer are powered by - HP petrol engine. a) 1.2 to 3.2 b) 2.2 to 3.4 c) 0.2 to 3.2 d) 1.2 to 3.0

Last Answer : 1.2 to 3.0

Sprayer are versatile and simple power operated machines. a) Foot pedal sprayer b) Motorized knapsack sprayer c) Hand optimizer d) All of the above

Description : Sprayer are versatile and simple power operated machines. a) Foot pedal sprayer b) Motorized knapsack sprayer c) Hand optimizer d) All of the above

Last Answer : Motorized knapsack sprayer

Han optimizer sprayer has container of to litres capacity. a) 0.5 to 4.5 b) 0.1 to 3.4 c) 0.5 to 3.

Description : Han optimizer sprayer has container of to litres capacity. a) 0.5 to 4.5 b) 0.1 to 3.4 c) 0.5 to 3.5

Last Answer : 0.5 to 3.5

Basic components of sprayer is a) Nozzle body b) Spray boom c) Nozzle cap d) All of the above

Description : Basic components of sprayer is a) Nozzle body b) Spray boom c) Nozzle cap d) All of the above

Last Answer : All of the above

Foot or pedal sprayer developed Kg/cm^3 Pressure. a. 17-21. c. 18-25 b. 17- 28. d. 20-25

Description : Foot or pedal sprayer developed Kg/cm^3 Pressure. a. 17-21. c. 18-25 b. 17- 28. d. 20-25

Last Answer :  17-21.

In battery operated sprayer fit Volta rechargeable battery. a. 3 c. 4 b. 5. d. 6

Description : In battery operated sprayer fit Volta rechargeable battery. a. 3 c. 4 b. 5. d. 6

Last Answer : 6

Motorized knapsack sprayer blade rotation at about ……. To rev/min. a. 200 to 300. c. 100 to 120 b. 120 to 400. d. 150 to 300

Description : Motorized knapsack sprayer blade rotation at about ……. To rev/min. a. 200 to 300. c. 100 to 120 b. 120 to 400. d. 150 to 300

Last Answer : 100 to 120

The power developed in prime mover of power operated sprayer is a) 1 to 5 HP b) 5 to 10 HP c) 10 to 20 HP d) None of the above

Description : The power developed in prime mover of power operated sprayer is a) 1 to 5 HP b) 5 to 10 HP c) 10 to 20 HP d) None of the above

Last Answer : 1 to 5 HP

sprayer do not require a separate tank a) Hand compression sprayer b) Knapsack hand compression sprayer c) Rocker sprayer d) Power sprayer

Description : sprayer do not require a separate tank a) Hand compression sprayer b) Knapsack hand compression sprayer c) Rocker sprayer d) Power sprayer

Last Answer : Suppose in a squid game, players wanted to escape the game. If they need to travel 100 km North and 125 km East. What must be their resultant vector?  160.07 m 161.02 m 160.08 km none of the above 161 km

Knapsack hand compression sprayer develops pressure between a) 2 to 3.5 kg/cm b) 3 to 12 kg/cm c) 12 to 35 kg/cm d) None of the above

Description : Knapsack hand compression sprayer develops pressure between a) 2 to 3.5 kg/cm b) 3 to 12 kg/cm c) 12 to 35 kg/cm d) None of the above

Last Answer : 3 to 12 kg/cm

Basic components of sprayer. a. Nozzle body b. Nozzle boss c. Filter d. Spray gun e. All of the above

Description : Basic components of sprayer. a. Nozzle body b. Nozzle boss c. Filter d. Spray gun e. All of the above

Last Answer : All of the above

A man told his son that he would give him $1000 if he could accomplish the following task. The father gave his son ten envelopes and a thousand dollars, all in one dollar bills. He told his son, 'Place the money in the envelopes in such a manner that no matter what number of dollars I ask for, you can give me one or more of the envelopes, containing the exact amount I asked for without having to open any of the envelopes. If you can do this, you will keep the $1000.' When the father asked for a sum of money, the son was able to give him envelopes containing the exact amount of money asked for. How did the son distribute the money among the ten envelopes? -Riddles

Description : A man told his son that he would give him $1000 if he could accomplish the following task. The father gave his son ten envelopes and a thousand dollars, all in one dollar bills. He told his ... exact amount of money asked for. How did the son distribute the money among the ten envelopes? -Riddles

Last Answer : The contents or the ten envelopes (in dollar bills) should be as follows: $1, 2, 4, 8, 16, 32, 64, 128, 256, 489. The first nine numbers are in geometrical progression, and their sum, deducted from 1,000, gives the contents of the tenth envelope.

Why should association regulate the staging of event?

Description : Why should association regulate the staging of event?

Last Answer : Your answer depends on the types of events and the purpose forstaging each. There is no standard answer to your question.

Which of the following statements regarding angiogenesis are true? a. Angiogenesis is a seminal biologic event with clinical relevance limited to its effect upon tumor growth b. C-X-C chemokines regulate angiogenesis c. PF-4 has angiogenic properties d. Sites of atherosclerosis demonstrate chronic angiogenic activity

Description : Which of the following statements regarding angiogenesis are true? a. Angiogenesis is a seminal biologic event with clinical relevance limited to its effect upon tumor growth b. C-X-C ... c. PF-4 has angiogenic properties d. Sites of atherosclerosis demonstrate chronic angiogenic activity

Last Answer : Answer: b, d An important component of tissue repair and wound healing is the process of angiogenesis. This normal, physiologic process is a local, transient event which is ... between these factors may govern overall angiogenic potential in a variety of physiological and pathophysiological states

The primary function of carbohydrates is to: a) break down molecules. b) aid in digestion. c) supply the body with energy. d) regulate the flow of chyme.

Description : The primary function of carbohydrates is to: a) break down molecules. b) aid in digestion. c) supply the body with energy. d) regulate the flow of chyme.

Last Answer : ANSWER: C -- SUPPLY THE BODY WITH ENERGY.

Application rate of sprayer is affected by a. forward of speed b. number of nozzle c. rate of discharge d. all of the above

Description : Application rate of sprayer is affected by a. forward of speed b. number of nozzle c. rate of discharge d. all of the above

Last Answer : d. all of the above