Ultra low volume sprayer consist of high spinning disc which makes droplet size a. 50 -100mm. b 40-100mm. c.35-100mm. d. None of above

1 Answer

Answer :

Ans- c. 35-100mm.

Related questions

Description : is the application of sprayer. a) To break the liquid droplet of effective size b) To distribute them uniformly event plants c) To regulate amount of liquid to avoid excessive application. d) All above them

Last Answer : All above them

Description : Which altra low volume sprayer is used for controlled droplet application a). Herbi sprayer b). Micron herbi sprayer c). Both a and b d). None of these

Last Answer : c). Both a and b

Description : Bucket type sprayer consist of: i) Single and double acting pump c) Plunger type pump j) Centrifugal pump d) All are correct

Last Answer : Single and double acting pump

Description : Bucket type sprayer consist of: A. Single and double acting pump B. Centrifugal pump C. Plunger type pump D. All are correct

Last Answer : Single and double acting pump

Description : Standard disc plough diameter size is A. 40 to 60 cm C. 70 to 90 cm B. 60 to 90 cm D. 50 to 70 cm

Last Answer : 60 to 90 cm

Description : is not a type of spray a) High volume spray b) Medium volume spray c) Low volume spray d) Ultra low volume spray

Last Answer : Medium volume spray

Description : Knapsack hand compression sprayer develops pressure between a) 2 to 3.5 kg/cm b) 3 to 12 kg/cm c) 12 to 35 kg/cm d) None of the above

Last Answer : 3 to 12 kg/cm

Description : The disc angle of a disc plough ranges from? [a] 40-45 degree [b] 30-35 degree [c] 20-25 degree [d] 45-50 degree [e] None of the above

Last Answer : [a] 40-45 degree

Description : Ultra Low volume (UVL) sprays is less than 5 litre spray/ hector a. 2 liter spray/ hector b. 3 liter spray/ hector

Last Answer : Ans- c. 5 litre spray/ hector

Description : the capacity of ultra-low volume spray a) less than 5 litres/hector b) more than 5 litres/ hector c) 5 to 400 litres/hector d) More than 400 litres/hector

Last Answer : less than 5 litres/hector

Description : Standerd disc plough consist of steel dics of… to……. CM diameter. a. 60,90 c) 60,80 b. 70,100. d) 70,90

Last Answer : 60,90

Description : harrow consist of two gangs placed end to end. A) Single action disc harrow B) Double action disc harrow C) Triple action disc harrow D) None above

Last Answer : Single action disc harrow

Description : Label size of foreign article is min & postage paid words should not be less than a) 70mm X 100mm & 300sq mm b) 50mm X 80mm & 200sq mm c) 25mm X 50 mm & 100 sq mm d) None of these

Last Answer : a) 70mm X 100mm & 300sq mm

Description : Volume of spray fluid in ultra low vol- ume spraying a).300-500 l/ha b).2-5 l/ha c).25-50 l/ha d).100-150 l/ha

Last Answer : b).2-5 l/ha

Description : For high degree of workability, the slump value should vary between (a) 0 to 25mm (b) 25 to 50mm (c) 50 to 80mm (d) 80 to 100mm

Last Answer : (d) 80 to 100mm

Description : Barometric pressure is equal to  (a) 760 mm Hg  (b) zero mm Hg  (c) 735.6 mm Hg  (d) 1 mm Hg  (e) 100mm Hg.

Last Answer : Answer : a

Description : A problem Drum ( 3 ft. diameter ; 6 ft. height ) is field with a fluid whose density is 50 lb/ft^3. Determine the total volume of the fluid.  A. 42.41 ft^3  B.44.35 ft^3  C.45.63 ft^3  D.41.23 ft^3 Formula: Vf = (pi d^2 h) / 4

Last Answer : 42.41 ft^3

Description : Which one of the following RP technologies uses solid sheet stock as the starting material? a.Droplet deposition manufacturing b.Fused-deposition modeling c.Laminated-Object Manufacturing d.Selective Laser Sintering

Last Answer : c.Laminated-Object Manufacturing

Description : Which of the following RP technologies uses powders as the starting material? a.Droplet Deposition Manufacturing b.Fused-Deposition Modeling c.Selective Laser Sintering d.Stereolithography

Last Answer : c.Selective Laser Sintering

Description : In the context of rapid prototyping and additive manufacturing, tessellation refers to theprocess of slicing the CAD model of the part into layers. a.Droplet Deposition Manufacturing b.Used-Deposition Modeling c.Laminated-Object Manufacturing d.Stereolithography

Last Answer : d.Stereolithography

Description : Water lost in form of liquid droplet is called as ______________ a) Drift b) water loss c) Water evaporation d) none of the above

Last Answer : Drift

Description : Disc angle in a standard disc plough varies from a. 25-35 ° c. 45-55 ° d. 55-65 °

Last Answer : Ans - b. 42-45 °

Description : In disc ploughs tilt angel varies between b. 25-35° c. 35-45° d. 45-50°

Last Answer : Ans -   a. 15-25°

Description : What's going on when my mac's rainbow disc keeps spinning?

Last Answer : answer:Basically, from what I understand it’s when the computer’s internal calculator isn’t able to calculate when a process will be done. Mostly a clog of digital traffic, or your RAM has been maxed out and it’s reassigning memory. Or, and application has completely crashed. Rare though.

Description : A cantilever shaft having 50 mm diameter and a length of 300 mm has a disc of mass 100 kg at its free end. The Young’s modulus for the shaft material is 200 GN/m 2 . Determine the frequency of transverse vibrations of the shaft. a) 31 b) 35 c) 37 d) 41

Last Answer : d) 41

Description : Standard disc Plough consists of steel disc of _ diameter a) 20 to 40 cm. c) 60 to 90 cm b) 30 to 60 cm. d) 70 to 100 cm

Last Answer :  60 to 90 cm

Description : Gage pressure within a spherical droplet of a fluid is 'p'. What will be gage pressure within a bubble of the same size & of the same fluid? (A) p (B) 2 p (C) 0.5 p (D) 0.25 p

Last Answer : (B) 2 p

Description : The pressure outside a bubble/droplet of liquid is __________ the internal pressure. (A) Greater than (B) Less than (C) Equal to (D) Unpredictable; depends on the bubble size

Last Answer : Option B

Description : swirl plate in the cone nozzle is provided to. a. Impart rotational motion to the liquid passing through it. b. To increase the droplet size. c. To decrease the droplet size. d. To increase the spray angle.

Last Answer : a. Impart rotational motion to the liquid passing through it.

Description : . Herbicide spray drift can be reduced by a). Increasing the droplet size b). Forming a foam c). Making invert emulsion d). All of these

Last Answer : d). All of these

Description : In a sprayer overlapping can be increased by increasing a) Nozzle diameter b) Pressure c) Discharge d) Height of nozzle Ans. d

Last Answer : ans d

Description : Battery operated sprayer consists of 10 lit capacity tank and rechargeable battery. b. 10 Volt c. 12 Volt. d. None of above Ans- a. 6 Volt

Last Answer : Ans-    a. 6 Volt

Description : Motorized Knapsack sprayer powered by a. petrol engine. b. Diesel engine. c. gas engine. d. None of above

Last Answer : Ans-   a. petrol engine.

Description : Motorized Knapsack sprayer develops pressure below a. 3.5 kg/cm2b. 2.5 kg/cm2 d. None of above

Last Answer : Ans-   c. 1.5 kg/cm2  

Description : Foot or pedal operated sprayer develops pressure a. 14 to 18kg/cm2 b. 15 to 21 kg/cm2 d. None of above

Last Answer : Ans-   c. 17 to 21 kg/cm2

Description : Rocker sprayer and Foot or pedal operated sprayer a. have small built tank b. have big built tank d. None of above

Last Answer : Ans- c. does not have in built tank and separate spray tank is necessary.    

Description : Rocker sprayer develops pressure b. 15 to 20kg/cm2 c. 15 to 25 kg/cm2 d. None of above

Last Answer : Ans-   a. 14 to 18kg/cm2

Description : Knapsack hand compression sprayer covers b. 1-2 ha/day c. 1-3 ha/day d. None of above

Last Answer : Ans-    a. 0.5-1 ha/day.

Description : Knapsack hand compression sprayer has flat or bean shaped tank designed to fit comfortably on the ............of the operator. a. hand. b. leg. c. back. d. None of above

Last Answer : Ans- c. back.

Description : Hand compression sprayer , the pumping is required to maintain the normal pressure of a. 1-3.5kg/cm2.. b. 1.5-3.5kg/cm2. d. None of above

Last Answer : Ans- c. 2-3.5kg/cm2.

Description : A tank capacity of knapsack sprayer is about: a. 5-10 litres c) 9-22.5 litres b. 8-10 litres d) 10-25.5 litres

Last Answer : 9-22.5 litres

Description : In power-operated sprayer, the pump works at a pressure of: A. 2-5 Kg/cm2 B. 3-8.5 Kg/cm2 C. 4-12 Kg/cm2. D. 5-15 Kg/cm2

Last Answer : 3-8.5 Kg/cm2

Description : The pump is used in power-operated sprayer is: A. Plunger type B. Diaphragm type C. Gear type D. Piston type

Last Answer : Gear type

Description : Tank capacity of compression sprayer is: A. 10 litres B. 12 litres C. 14 litres D. 20 litres

Last Answer : 14 litres

Description : A tank capacity of knapsack sprayer is about: A. 5-10 litres B. 8-10 litres C. 9-22.5 litres D. 10-25.5 litres

Last Answer : 10-25.5 litres

Description : Steel Tank in the power sprayer is used to avoid a) Moisturisation b) Corrosion c) Leakages d) Stability

Last Answer : Corrosion

Description : A Power sprayer essentially consists of: a) Tank a) Agitator b) Pressure Gauge c) All of the above

Last Answer : All of the above

Description : Motorized knapsack sprayer are powered by - HP petrol engine. a) 1.2 to 3.2 b) 2.2 to 3.4 c) 0.2 to 3.2 d) 1.2 to 3.0

Last Answer : 1.2 to 3.0

Description : Sprayer are versatile and simple power operated machines. a) Foot pedal sprayer b) Motorized knapsack sprayer c) Hand optimizer d) All of the above

Last Answer : Motorized knapsack sprayer