Steel Tank in the power sprayer is used to avoid a) Moisturisation b) Corrosion c) Leakages d) Stability

Steel Tank in the power sprayer is used to avoid a) Moisturisation b) Corrosion c) Leakages d) Stability
by

1 Answer

Answer :

Corrosion
by

Related questions

A Power sprayer essentially consists of: a) Tank a) Agitator b) Pressure Gauge c) All of the above

Description : A Power sprayer essentially consists of: a) Tank a) Agitator b) Pressure Gauge c) All of the above

Last Answer : All of the above

sprayer do not require a separate tank a) Hand compression sprayer b) Knapsack hand compression sprayer c) Rocker sprayer d) Power sprayer

Description : sprayer do not require a separate tank a) Hand compression sprayer b) Knapsack hand compression sprayer c) Rocker sprayer d) Power sprayer

Last Answer : Suppose in a squid game, players wanted to escape the game. If they need to travel 100 km North and 125 km East. What must be their resultant vector?  160.07 m 161.02 m 160.08 km none of the above 161 km

Battery operated sprayer consists of 10 lit capacity tank and rechargeable battery. b. 10 Volt c. 12 Volt. d. None of above Ans- a. 6 Volt

Description : Battery operated sprayer consists of 10 lit capacity tank and rechargeable battery. b. 10 Volt c. 12 Volt. d. None of above Ans- a. 6 Volt

Last Answer : Ans-    a. 6 Volt

Rocker sprayer and Foot or pedal operated sprayer a. have small built tank b. have big built tank d. None of above

Description : Rocker sprayer and Foot or pedal operated sprayer a. have small built tank b. have big built tank d. None of above

Last Answer : Ans- c. does not have in built tank and separate spray tank is necessary.    

Knapsack hand compression sprayer has flat or bean shaped tank designed to fit comfortably on the ............of the operator. a. hand. b. leg. c. back. d. None of above

Description : Knapsack hand compression sprayer has flat or bean shaped tank designed to fit comfortably on the ............of the operator. a. hand. b. leg. c. back. d. None of above

Last Answer : Ans- c. back.

A tank capacity of knapsack sprayer is about: a. 5-10 litres c) 9-22.5 litres b. 8-10 litres d) 10-25.5 litres

Description : A tank capacity of knapsack sprayer is about: a. 5-10 litres c) 9-22.5 litres b. 8-10 litres d) 10-25.5 litres

Last Answer : 9-22.5 litres

Tank capacity of compression sprayer is: A. 10 litres B. 12 litres C. 14 litres D. 20 litres

Description : Tank capacity of compression sprayer is: A. 10 litres B. 12 litres C. 14 litres D. 20 litres

Last Answer : 14 litres

A tank capacity of knapsack sprayer is about: A. 5-10 litres B. 8-10 litres C. 9-22.5 litres D. 10-25.5 litres

Description : A tank capacity of knapsack sprayer is about: A. 5-10 litres B. 8-10 litres C. 9-22.5 litres D. 10-25.5 litres

Last Answer : 10-25.5 litres

is the application of sprayer. a) To break the liquid droplet of effective size b) To distribute them uniformly event plants c) To regulate amount of liquid to avoid excessive application. d) All above them

Description : is the application of sprayer. a) To break the liquid droplet of effective size b) To distribute them uniformly event plants c) To regulate amount of liquid to avoid excessive application. d) All above them

Last Answer : All above them

What steps can be taken to avoid stress corrosion cracking (SCC) in steel vessels used for storing anhydrous ammonia?

Description : What steps can be taken to avoid stress corrosion cracking (SCC) in steel vessels used for storing anhydrous ammonia?

Last Answer : The U.S. National Board of Pressure Vessel Inspectors recommends the following in one of their classic articles: 1. Pressure vessels should be fully stress relieved or fabricated with heads that ... at least 0.2 percent water to inhibit SCC. Source: National Board of Pressure Vessel Inspectors

In power-operated sprayer, the pump works at a pressure of: A. 2-5 Kg/cm2 B. 3-8.5 Kg/cm2 C. 4-12 Kg/cm2. D. 5-15 Kg/cm2

Description : In power-operated sprayer, the pump works at a pressure of: A. 2-5 Kg/cm2 B. 3-8.5 Kg/cm2 C. 4-12 Kg/cm2. D. 5-15 Kg/cm2

Last Answer : 3-8.5 Kg/cm2

he pump is used in power-operated sprayer is: A. Plunger type B. Diaphragm type C. Gear type D. Piston type

Description : The pump is used in power-operated sprayer is: A. Plunger type B. Diaphragm type C. Gear type D. Piston type

Last Answer : Gear type

Sprayer are versatile and simple power operated machines. a) Foot pedal sprayer b) Motorized knapsack sprayer c) Hand optimizer d) All of the above

Description : Sprayer are versatile and simple power operated machines. a) Foot pedal sprayer b) Motorized knapsack sprayer c) Hand optimizer d) All of the above

Last Answer : Motorized knapsack sprayer

The power developed in prime mover of power operated sprayer is a) 1 to 5 HP b) 5 to 10 HP c) 10 to 20 HP d) None of the above

Description : The power developed in prime mover of power operated sprayer is a) 1 to 5 HP b) 5 to 10 HP c) 10 to 20 HP d) None of the above

Last Answer : 1 to 5 HP

Which elements increase the corrosion resistance of steel ?

Description : Which elements increase the corrosion resistance of steel ?

Last Answer : Chromium and nickel.

Which element is added in steel to increase resistance to corrosion ?

Description : Which element is added in steel to increase resistance to corrosion ?

Last Answer : Chromium.

Public Debt Management Agency (PDMA) is being to set up to prevent leakages and development of the ___________ A. Treasury Market B. Bond Market C. Money Market D. Capital Market E. Call Money Market

Description : Public Debt Management Agency (PDMA) is being to set up to prevent leakages and development of the ___________ A. Treasury Market B. Bond Market C. Money Market D. Capital Market E. Call Money Market

Last Answer : B. Bond Market Explanation: The government‘s intention to set up a Public Debt Management Agency (PDMA) is not only required for the development of the bond market in the country, but it would also prevent leakages of public funds.

Explain the simple steps that can be followed in shop – floor for quantification of compressed air leakages.

Description : Explain the simple steps that can be followed in shop – floor for quantification of compressed air leakages.  

Last Answer : The following steps can be followed for quantification of compressed air leakages. Shut off compressed air operated equipments (or conduct test when no equipment is using compressed air). Run the compressor to ... per minute (cmm) T = Time on load in minutes T = Time unload in minutes 

Suggest one type of materials for water proofing for the following situations. i. Rising dampness in building ii. Leakages in dam iii. Concrete continuously in wet or damp condition iv. Leakages in lavatory ,bathroom and kitchen floor v. Cracks on plastered surface vi. Cracks on roof surface

Description : Suggest one type of materials for water proofing for the following situations. i. Rising dampness in building ii. Leakages in dam iii. Concrete continuously in wet or damp condition iv. Leakages in lavatory ,bathroom and kitchen floor v. Cracks on plastered surface vi. Cracks on roof surface

Last Answer : i. Flexible materials like butyl rubber, hot bitumen (asphalt), plastic sheets, bituminous felts, sheets of lead. ii. Liquid applied cementitious membranes iii. Liquid applied cementitious membranes ... v. Liquid applied cementitious membranes. vi. Brick bat coba, liquid applied bituminous membrane.

In a sprayer overlapping can be increased by increasing a) Nozzle diameter b) Pressure c) Discharge d) Height of nozzle Ans. d

Description : In a sprayer overlapping can be increased by increasing a) Nozzle diameter b) Pressure c) Discharge d) Height of nozzle Ans. d

Last Answer : ans d

Motorized Knapsack sprayer powered by a. petrol engine. b. Diesel engine. c. gas engine. d. None of above

Description : Motorized Knapsack sprayer powered by a. petrol engine. b. Diesel engine. c. gas engine. d. None of above

Last Answer : Ans-   a. petrol engine.

Motorized Knapsack sprayer develops pressure below a. 3.5 kg/cm2b. 2.5 kg/cm2 d. None of above

Description : Motorized Knapsack sprayer develops pressure below a. 3.5 kg/cm2b. 2.5 kg/cm2 d. None of above

Last Answer : Ans-   c. 1.5 kg/cm2  

Foot or pedal operated sprayer develops pressure a. 14 to 18kg/cm2 b. 15 to 21 kg/cm2 d. None of above

Description : Foot or pedal operated sprayer develops pressure a. 14 to 18kg/cm2 b. 15 to 21 kg/cm2 d. None of above

Last Answer : Ans-   c. 17 to 21 kg/cm2

Rocker sprayer develops pressure b. 15 to 20kg/cm2 c. 15 to 25 kg/cm2 d. None of above

Description : Rocker sprayer develops pressure b. 15 to 20kg/cm2 c. 15 to 25 kg/cm2 d. None of above

Last Answer : Ans-   a. 14 to 18kg/cm2

Knapsack hand compression sprayer covers b. 1-2 ha/day c. 1-3 ha/day d. None of above

Description : Knapsack hand compression sprayer covers b. 1-2 ha/day c. 1-3 ha/day d. None of above

Last Answer : Ans-    a. 0.5-1 ha/day.

Hand compression sprayer , the pumping is required to maintain the normal pressure of a. 1-3.5kg/cm2.. b. 1.5-3.5kg/cm2. d. None of above

Description : Hand compression sprayer , the pumping is required to maintain the normal pressure of a. 1-3.5kg/cm2.. b. 1.5-3.5kg/cm2. d. None of above

Last Answer : Ans- c. 2-3.5kg/cm2.

Ultra low volume sprayer consist of high spinning disc which makes droplet size a. 50 -100mm. b 40-100mm. c.35-100mm. d. None of above

Description : Ultra low volume sprayer consist of high spinning disc which makes droplet size a. 50 -100mm. b 40-100mm. c.35-100mm. d. None of above

Last Answer : Ans- c. 35-100mm.

Bucket type sprayer consist of: i) Single and double acting pump c) Plunger type pump j) Centrifugal pump d) All are correct

Description : Bucket type sprayer consist of: i) Single and double acting pump c) Plunger type pump j) Centrifugal pump d) All are correct

Last Answer : Single and double acting pump

Bucket type sprayer consist of: A. Single and double acting pump B. Centrifugal pump C. Plunger type pump D. All are correct

Description : Bucket type sprayer consist of: A. Single and double acting pump B. Centrifugal pump C. Plunger type pump D. All are correct

Last Answer : Single and double acting pump

Motorized knapsack sprayer are powered by - HP petrol engine. a) 1.2 to 3.2 b) 2.2 to 3.4 c) 0.2 to 3.2 d) 1.2 to 3.0

Description : Motorized knapsack sprayer are powered by - HP petrol engine. a) 1.2 to 3.2 b) 2.2 to 3.4 c) 0.2 to 3.2 d) 1.2 to 3.0

Last Answer : 1.2 to 3.0

Han optimizer sprayer has container of to litres capacity. a) 0.5 to 4.5 b) 0.1 to 3.4 c) 0.5 to 3.

Description : Han optimizer sprayer has container of to litres capacity. a) 0.5 to 4.5 b) 0.1 to 3.4 c) 0.5 to 3.5

Last Answer : 0.5 to 3.5

Basic components of sprayer is a) Nozzle body b) Spray boom c) Nozzle cap d) All of the above

Description : Basic components of sprayer is a) Nozzle body b) Spray boom c) Nozzle cap d) All of the above

Last Answer : All of the above

Foot or pedal sprayer developed Kg/cm^3 Pressure. a. 17-21. c. 18-25 b. 17- 28. d. 20-25

Description : Foot or pedal sprayer developed Kg/cm^3 Pressure. a. 17-21. c. 18-25 b. 17- 28. d. 20-25

Last Answer :  17-21.

In battery operated sprayer fit Volta rechargeable battery. a. 3 c. 4 b. 5. d. 6

Description : In battery operated sprayer fit Volta rechargeable battery. a. 3 c. 4 b. 5. d. 6

Last Answer : 6

Motorized knapsack sprayer blade rotation at about ……. To rev/min. a. 200 to 300. c. 100 to 120 b. 120 to 400. d. 150 to 300

Description : Motorized knapsack sprayer blade rotation at about ……. To rev/min. a. 200 to 300. c. 100 to 120 b. 120 to 400. d. 150 to 300

Last Answer : 100 to 120

are the application of pedal sprayer a) Row crops b) Vegetables c) Nursery stocks d) Tall crops

Description : are the application of pedal sprayer a) Row crops b) Vegetables c) Nursery stocks d) Tall crops

Last Answer : Tall crops

Knapsack hand compression sprayer develops pressure between a) 2 to 3.5 kg/cm b) 3 to 12 kg/cm c) 12 to 35 kg/cm d) None of the above

Description : Knapsack hand compression sprayer develops pressure between a) 2 to 3.5 kg/cm b) 3 to 12 kg/cm c) 12 to 35 kg/cm d) None of the above

Last Answer : 3 to 12 kg/cm

Basic components of sprayer. a. Nozzle body b. Nozzle boss c. Filter d. Spray gun e. All of the above

Description : Basic components of sprayer. a. Nozzle body b. Nozzle boss c. Filter d. Spray gun e. All of the above

Last Answer : All of the above

The outlet temperature of cooling water in a heat exchanger is generally not allowed to exceed above 50°C in industrial practice mainly to avoid (A) Its evaporation loss (B) Excessive corrosion (C) Uneconomic LMTD (D) Decrease in heat exchanger efficiency

Description : The outlet temperature of cooling water in a heat exchanger is generally not allowed to exceed above 50°C in industrial practice mainly to avoid (A) Its evaporation loss (B) Excessive corrosion (C) Uneconomic LMTD (D) Decrease in heat exchanger efficiency

Last Answer : (B) Excessive corrosion

The main reason for making the copper calorimeter (used in bomb calorimeter) silvery white and shining/polished is to (A) Minimise its corrosion (B) Avoid radiation heat loss (C) Make it look attractive (D) None of these

Description : The main reason for making the copper calorimeter (used in bomb calorimeter) silvery white and shining/polished is to (A) Minimise its corrosion (B) Avoid radiation heat loss (C) Make it look attractive (D) None of these

Last Answer : (B) Avoid radiation heat loss

During the absorption of HCl gas in water (to produce liquid HCl), the gas is kept above dew point to (A) Increase the rate of absorption (B) Avoid corrosion (C) Reduce the cooling water circulation rate (D) None of these

Description : During the absorption of HCl gas in water (to produce liquid HCl), the gas is kept above dew point to (A) Increase the rate of absorption (B) Avoid corrosion (C) Reduce the cooling water circulation rate (D) None of these

Last Answer : (B) Avoid corrosion

Write down the factors determining the choice of material to avoid corrosion.

Description : Write down the factors determining the choice of material to avoid corrosion. 

Last Answer : Factors determining the choice of material to avoid corrosion: 1. Resistance to corrosion in given environment 2. Operating condition such as temperature, pressure and flow rate. 3. Mechanical ... cost, replacement cost 7. Expected life 8. Material selection based on sound economic analysis.

A person climbing a hill bends forward in order to (a) avoid slipping (b) increase speed (c) reduce fatigue (d) increase stability

Description : A person climbing a hill bends forward in order to (a) avoid slipping (b) increase speed (c) reduce fatigue (d) increase stability

Last Answer : Ans:(d)

Pollution caused by cooling tower includes 1. Fouling 2. Limestone formation 3. Corrosion 4. All of above

Description : Pollution caused by cooling tower includes 1. Fouling 2. Limestone formation 3. Corrosion 4. All of above

Last Answer : All of above

In cooling tower ,higher temperature __________ corrosion potential • Decrease • Increase • Temperature has no effect on corrosion

Description : In cooling tower ,higher temperature __________ corrosion potential • Decrease • Increase • Temperature has no effect on corrosion

Last Answer : Increase

The presence of these pollutants can cause a series of problems. The main problems that are caused______ • are fouling, • limestone formation, • corrosion and biological • All of the above

Description : The presence of these pollutants can cause a series of problems. The main problems that are caused______ • are fouling, • limestone formation, • corrosion and biological • All of the above

Last Answer : All of the above

Differential lock in tractor is used to improve a) Lateral stability b) Braking performance c) Hydraulic lift d) Traction of a wheel

Description : Differential lock in tractor is used to improve a) Lateral stability b) Braking performance c) Hydraulic lift d) Traction of a wheel

Last Answer : Braking performance 

Differential lock in tractor is used to improve a) Lateral stability b) Braking performance c) Hydraulic lift d) Traction of a wheel

Description : Differential lock in tractor is used to improve a) Lateral stability b) Braking performance c) Hydraulic lift d) Traction of a wheel

Last Answer : ans d

. For achieving maximum buckling stability use………….parameters. a) location c) quantity b) dimensions d) All of above

Description : . For achieving maximum buckling stability use………….parameters. a) location c) quantity b) dimensions d) All of above

Last Answer : All of above

The ………..used to improve the stability of the total structure HCT. a) concrete material c) wind properties b) stiffening rings d) functional structure

Description : The ………..used to improve the stability of the total structure HCT. a) concrete material c) wind properties b) stiffening rings d) functional structure

Last Answer : stiffening rings