The main reason for making the copper calorimeter (used in bomb calorimeter) silvery white and shining/polished is to (A) Minimise its corrosion (B) Avoid radiation heat loss (C) Make it look attractive (D) None of these

The main reason for making the copper calorimeter (used in bomb
calorimeter) silvery white and shining/polished is to
(A) Minimise its corrosion
(B) Avoid radiation heat loss
(C) Make it look attractive
(D) None of these
by

1 Answer

Answer :

(B) Avoid radiation heat loss
by

Related questions

The 'bomb' in the bomb calorimeter is made of (A) Molybdenum stainless steel(B) Mild steel(C) High silicon iron (14% Si)(D) Copper

Description : The 'bomb' in the bomb calorimeter is made of (A) Molybdenum stainless steel (B) Mild steel (C) High silicon iron (14% Si) (D) Copper

Last Answer : (A) Molybdenum stainless steel

The main reason for dividing a tall packed tower into series of small towers is to (A) Minimise the overall pressure drop (B) Avoid flooding (C) Reduce liquid hold up (D) Avoid channelling

Description : The main reason for dividing a tall packed tower into series of small towers is to (A) Minimise the overall pressure drop (B) Avoid flooding (C) Reduce liquid hold up (D) Avoid channelling

Last Answer : (D) Avoid channelling

The base of an electric iron is brightly polished mainly - (1) to make it smooth and frictionless (2) to make it rust-proof (3) to reduce heat loss by radiation (4) to make it more durable

Description : The base of an electric iron is brightly polished mainly - (1) to make it smooth and frictionless (2) to make it rust-proof (3) to reduce heat loss by radiation (4) to make it more durable

Last Answer : (3) to reduce heat loss by radiation Explanation: Polished surfaces are poor radiators of heat. So loss of heat on that account is reduced and the electric iron remains hotter than otherwise.

The base of an electric iron is brightly polished mainly - (1) to make it smooth and frictionless (2) to make it rust-proof (3) to reduce heat loss by radiation (4) to make it more durable

Description : The base of an electric iron is brightly polished mainly - (1) to make it smooth and frictionless (2) to make it rust-proof (3) to reduce heat loss by radiation (4) to make it more durable

Last Answer : (3) to reduce heat loss by radiation Explanation: Polished surfaces are poor radiators of heat. So loss of heat on that account is reduced and the electric iron remains hotter than otherwise.

The outlet temperature of cooling water in a heat exchanger is generally not allowed to exceed above 50°C in industrial practice mainly to avoid (A) Its evaporation loss (B) Excessive corrosion (C) Uneconomic LMTD (D) Decrease in heat exchanger efficiency

Description : The outlet temperature of cooling water in a heat exchanger is generally not allowed to exceed above 50°C in industrial practice mainly to avoid (A) Its evaporation loss (B) Excessive corrosion (C) Uneconomic LMTD (D) Decrease in heat exchanger efficiency

Last Answer : (B) Excessive corrosion

During its calorific value determination by bomb calorimeter, coal is combusted by (A) Air (B) Oxygen (C) Oxygen enriched air (D) None of these

Description : During its calorific value determination by bomb calorimeter, coal is combusted by (A) Air (B) Oxygen (C) Oxygen enriched air (D) None of these

Last Answer : (C) Oxygen enriched air

The best method of determining sulphur in crude oil is by the __________ method. (A) Kjeldahl (B) Dumas (C) Bomb calorimeter (D) Junkers calorimeter

Description : The best method of determining sulphur in crude oil is by the __________ method. (A) Kjeldahl (B) Dumas (C) Bomb calorimeter (D) Junkers calorimeter

Last Answer : (C) Bomb calorimeter

Calorific values of both the solid as well as the liquid fuels can be determined by __________ calorimeter. (A) Bomb (B) Boy's (C) Junkers (D) None of these

Description : Calorific values of both the solid as well as the liquid fuels can be determined by __________ calorimeter. (A) Bomb (B) Boy's (C) Junkers (D) None of these

Last Answer : (A) Bomb

Bomb calorimeter is used to determine the (where, GCV - Gross Calorific Value. NCV - Net Calorific Value.) (A) GCV at constant pressure (B) GCV at constant volume (C) NCV at constant pressure (D) NCV at constant volume

Description : Bomb calorimeter is used to determine the (where, GCV - Gross Calorific Value. NCV - Net Calorific Value.) (A) GCV at constant pressure (B) GCV at constant volume (C) NCV at constant pressure (D) NCV at constant volume

Last Answer : (C) NCV at constant pressure

Bomb calorimeter is used for the determination of calorific value of the __________ fuels. (A) Gaseous (B) Solid(C) Liquid(D) Both (B) and (C)

Description : Bomb calorimeter is used for the determination of calorific value of the __________ fuels. (A) Gaseous (B) Solid (C) Liquid (D) Both (B) and (C)

Last Answer : (D) Both (B) and (C)

Calorific value as determined by bomb calorimeter is the (A) Higher calorific value at constant volume(B) Gross calorific value at constant pressure(C) Lower calorific value at constant pressure(D) Net calorific value at constant volume

Description : Calorific value as determined by bomb calorimeter is the (A) Higher calorific value at constant volume (B) Gross calorific value at constant pressure (C) Lower calorific value at constant pressure (D) Net calorific value at constant volume

Last Answer : (A) Higher calorific value at constant volume

Initial pressure of oxygen introduced into the 'bomb' of the bomb calorimeter for determination of calorific value of coal/fuel oil may be around __________ atm. (A) 3-5 (B) 25-30 (C) 60-65 (D) 95-100

Description : Initial pressure of oxygen introduced into the 'bomb' of the bomb calorimeter for determination of calorific value of coal/fuel oil may be around __________ atm. (A) 3-5 (B) 25-30 (C) 60-65 (D) 95-100

Last Answer : (B) 25-30

Calorific value of both the solid & liquid fuels can be determined by using __________ calorimeter. (A) Junker's (B) Bomb (C) Boy's (D) None of these

Description : Calorific value of both the solid & liquid fuels can be determined by using __________ calorimeter. (A) Junker's (B) Bomb (C) Boy's (D) None of these

Last Answer : (B) Bomb

Bomb calorimeter can be used to determine the __________ of the coal. (A) Sulphur content (B) Calorific value (C) Both (A) & (B) (D) Neither (A) nor (B)

Description : Bomb calorimeter can be used to determine the __________ of the coal. (A) Sulphur content (B) Calorific value (C) Both (A) & (B) (D) Neither (A) nor (B)

Last Answer : (C) Both (A) & (B)

Dryness fraction of wet steam is defined as the ratio of mass of vapour in the mixture to the mass of mixture __________ calorimeter is not used for measuring the dryness fraction of steam. (A) Bomb (B) Separating (C) Bucket (D) Throttling

Description : Dryness fraction of wet steam is defined as the ratio of mass of vapour in the mixture to the mass of mixture __________ calorimeter is not used for measuring the dryness fraction of steam. (A) Bomb (B) Separating (C) Bucket (D) Throttling

Last Answer : A) Bomb

Dryness factor of steam is defined as the ratio of the mass of vapor in the mixture to the mass of the mixture. Dryness factor of steam is measured by a __________ calorimeter. (A) Bomb (B) Throttling (C) Junker's (D) Boy's

Description : Dryness factor of steam is defined as the ratio of the mass of vapor in the mixture to the mass of the mixture. Dryness factor of steam is measured by a __________ calorimeter. (A) Bomb (B) Throttling (C) Junker's (D) Boy's

Last Answer : Option B

In silvery paints, the main constituent present is - (1) Aluminium powder (2) Silver powder (3) Lead powder (4) White lead

Description : In silvery paints, the main constituent present is - (1) Aluminium powder (2) Silver powder (3) Lead powder (4) White lead

Last Answer : (1) Aluminium powder Explanation: In silvery paints, the main constituent is aluminium powder.

In silvery paints, the main constituent present is (1) Aluminium powder (2) Silver powder (3) Lead powder (4) White lead

Description : In silvery paints, the main constituent present is (1) Aluminium powder (2) Silver powder (3) Lead powder (4) White lead

Last Answer : Aluminium powder

Calorific value of proteins in a living person is less than that in a bomb calorimeter because (A) Digestion and absorption of proteins is less than 100% (B) Respiratory quotient of proteins is less than 1 (C) Specific dynamic action of proteins is high (D) Proteins are not completely oxidized in living persons

Description : Calorific value of proteins in a living person is less than that in a bomb calorimeter because (A) Digestion and absorption of proteins is less than 100% (B) Respiratory quotient of proteins ... Specific dynamic action of proteins is high (D) Proteins are not completely oxidized in living persons

Last Answer : Answer : D

Calorific value of proteins as determined in a bomb calorimeter is (A) 4 kcal/gm (B) 4.8 kcal/gm (C) 5.4 kcal/gm (D) 5.8 kcal/gm

Description : Calorific value of proteins as determined in a bomb calorimeter is (A) 4 kcal/gm (B) 4.8 kcal/gm (C) 5.4 kcal/gm (D) 5.8 kcal/gm

Last Answer : Answer : C

Describe with neat sketch of working of bomb calorimeter

Description : Describe with neat sketch of working of bomb calorimeter

Last Answer : working of bomb calorimeter:   The calorimeter is made of austenitic steel which provides considerable resistant to corrosion and enables it to withstand high pressure. In the calorimeter use of a strong ... the calorimeter. From the above data the calorific value of the fuel can be found.  

(i) Draw the neat sketch of bomb calorimeter. (ii) Write any three sources of air leakage in steam condenser.

Description : (i) Draw the neat sketch of bomb calorimeter. (ii) Write any three sources of air leakage in steam condenser.

Last Answer : (i)   (ii) Sources of air leakage in condenser: i) Air leak through joints and packing. ii) Air also comes in condenser with the steam. iii) In jet condensers dissolved air in the cooling water enters the condenser. 

(i) Explain construction and working of geothermal power plant. (ii) Explain the construction and working of bomb calorimeter.

Description : (i) Explain construction and working of geothermal power plant. (ii) Explain the construction and working of bomb calorimeter.

Last Answer : (i) Geothermal power plant: Construction and Working: geothermal power plant which consists of the following main components: Underground steam storage, steam separator, steam separator, turbine and Generator. Steam is ... . From the above data the calorific value of the fuel can be found. 

A hot body will radiate heat most rapidly, if its surface is (A) White & rough (B) Black & rough (C) White & polished (D) Black & polished

Description : A hot body will radiate heat most rapidly, if its surface is (A) White & rough (B) Black & rough (C) White & polished (D) Black & polished

Last Answer : (B) Black & rough

The thermal radiation emitted by a body is proportional to T n , where T is its absolute temperature. The value of 'n' is exactly 4 for (A) Black painted bodies only (B) All bodies (C) Polished bodies only (D) A black body

Description : The thermal radiation emitted by a body is proportional to T n , where T is its absolute temperature. The value of 'n' is exactly 4 for (A) Black painted bodies only (B) All bodies (C) Polished bodies only (D) A black body

Last Answer : (B) All bodies

Foot valves are provided in the suction line of a centrifugal pump to (A) Avoid priming, every time we start the pump (B) Remove the contaminant present in the liquid (C) Minimise the fluctuation in discharge (D) Control the liquid discharge

Description : Foot valves are provided in the suction line of a centrifugal pump to (A) Avoid priming, every time we start the pump (B) Remove the contaminant present in the liquid (C) Minimise the fluctuation in discharge (D) Control the liquid discharge

Last Answer : (A) Avoid priming, every time we start the pump

Can someone please help me understand this? I'm a white male, but for some reason I can only find people who are Asian, or look Asian attractive.

Description : Can someone please help me understand this? I'm a white male, but for some reason I can only find people who are Asian, or look Asian attractive.

Last Answer : Go with it. It’s ok.

A business that adopts the proactive strategy to social responsibility: A)assumes responsibility for its actions and responds to accusations without outside pressure B)tries to minimise or avoid additional obligations linked to a problem or problems C)allows a condition or potential problem to go unresolved until the public learns about it

Description : A business that adopts the proactive strategy to social responsibility: A)assumes responsibility for its actions and responds to accusations without outside pressure B)tries to minimise or avoid additional ... )allows a condition or potential problem to go unresolved until the public learns about it

Last Answer : A)assumes responsibility for its actions and responds to accusations without outside pressure

A business adopting the defence strategy approach to social responsibility: A)assumes responsibility for its actions B)tries to minimise or avoid additional obligations linked to the problem C)allows a condition or potential problem to go unresolved until the public learns about it D)complains that current government regulations are unfair and unfavourable

Description : A business adopting the defence strategy approach to social responsibility: A)assumes responsibility for its actions B)tries to minimise or avoid additional obligations linked to the problem C) ... the public learns about it D)complains that current government regulations are unfair and unfavourable

Last Answer : B)tries to minimise or avoid additional obligations linked to the problem

Aluminium is (A) Silvery white in colour. (B) Yellow in colour. (C) Reddish in colour. (D) Pale yellow in colour.

Description : Aluminium is (A) Silvery white in colour. (B) Yellow in colour. (C) Reddish in colour. (D) Pale yellow in colour.

Last Answer : (A) Silvery white in colour.

The divergent portion of a Venturimeter is made longer than convergent portion in order to (A) Avoid the tendency of breaking away the stream of liquid (B) To minimise frictional losses (C) Both (A) and (B) (D) None of these

Description : The divergent portion of a Venturimeter is made longer than convergent portion in order to (A) Avoid the tendency of breaking away the stream of liquid (B) To minimise frictional losses (C) Both (A) and (B) (D) None of these

Last Answer : Answer: Option C

Underground cables are laid at sufficient depth (a) to minimise temperature stresses (b) to avoid being unearthed easily due to removal of soil (c) to minimise the effect of shocks and vibrations due to gassing vehicles, etc. (d) for all of the above reasons

Description : Underground cables are laid at sufficient depth (a) to minimise temperature stresses (b) to avoid being unearthed easily due to removal of soil (c) to minimise the effect of shocks and vibrations due to gassing vehicles, etc. (d) for all of the above reasons

Last Answer : (c) to minimise the effect of shocks and vibrations due to gassing vehicles, etc.

Why would you invest the wax pattern as soon as possible in an indirect inlay fabrication: A. Minimise distortion B. Avoid contraction C. Avoid expansion

Description : Why would you invest the wax pattern as soon as possible in an indirect inlay fabrication: A. Minimise distortion B. Avoid contraction C. Avoid expansion

Last Answer : A. Minimise distortion

When preparing a class III cavity for composite restoration; in which situation should acid itching be used: A. Always should be performed to minimise marginal leakage B. Should not be performed because it might damage the adjacent tooth C. When extra retention is required D. Only in situations where cavity is shallow to avoid pulp irritation

Description : When preparing a class III cavity for composite restoration; in which situation should acid itching be used: A. Always should be performed to minimise marginal leakage B. Should not be ... extra retention is required D. Only in situations where cavity is shallow to avoid pulp irritation

Last Answer : A. Always should be performed to minimise marginal leakage

Transdermal drug delivery systems offer the following advantages except: A. They produce high peak plasma concentration of the drug B. They produce smooth and nonfluctuating plasma concentration of the drug C. They minimise interindividual variations in the achieved plasma drug concentration D. They avoid hepatic first-pass metabolism of the drug

Description : Transdermal drug delivery systems offer the following advantages except: A. They produce high peak plasma concentration of the drug B. They produce smooth and nonfluctuating plasma concentration of the ... the achieved plasma drug concentration D. They avoid hepatic first-pass metabolism of the drug

Last Answer : A. They produce high peak plasma concentration of the drug

Transdermal drug delivery systems offer the following advantages except: A. They produce high peak plasma concentration of the drug B. They produce smooth and nonfluctuating plasma concentration of the drug C. They minimise interindividual variations in the achieved plasma drug concentration D. They avoid hepatic first-pass metabolism of the drug

Description : Transdermal drug delivery systems offer the following advantages except: A. They produce high peak plasma concentration of the drug B. They produce smooth and nonfluctuating plasma concentration of the ... the achieved plasma drug concentration D. They avoid hepatic first-pass metabolism of the drug

Last Answer : A

Vehicle tyres are inflated properly (1) to ensure smooth running. (2) to allow the vehicle to take more load. (3) to avoid skidding and to minimise friction (4) to go fast and save fuel.

Description : Vehicle tyres are inflated properly (1) to ensure smooth running. (2) to allow the vehicle to take more load. (3) to avoid skidding and to minimise friction (4) to go fast and save fuel.

Last Answer : to avoid skidding and to minimise friction 

What are the best pennies to used in a craft, pre-1980 ones that are pure copper but need lots of shining, or more current ones that are an alloy, but require little shining?

Description : What are the best pennies to used in a craft, pre-1980 ones that are pure copper but need lots of shining, or more current ones that are an alloy, but require little shining?

Last Answer : answer:Throw them in a non-metal bowl with ¼ cup white vinegar and 1 tsp of salt. Wait a bit, then rinse off with some water. Easy peasy! Also, the different shades of pennies can be great for other crafts.

Copper is often used as an electrical conductor because it _______________. A. has high resistance at low temperatures B. has a highly polished surface C. is able to pass current with little opposition D. holds insulation together well

Description : Copper is often used as an electrical conductor because it _______________. A. has high resistance at low temperatures B. has a highly polished surface C. is able to pass current with little opposition D. holds insulation together well

Last Answer : Answer: C

Design of the casing of centrifugal pump should be such as to minimise the (A) Back flow through impeller (B) Loss of kinetic head (C) Loss of static head (D) None of these

Description : Design of the casing of centrifugal pump should be such as to minimise the (A) Back flow through impeller (B) Loss of kinetic head (C) Loss of static head (D) None of these

Last Answer : (B) Loss of kinetic head

24 Transformer cores are laminated in order to A. simplify its construction B. minimise eddy current loss C. reduce cost D. reduce hysteresis loss

Description : 24 Transformer cores are laminated in order to A. simplify its construction B. minimise eddy current loss C. reduce cost D. reduce hysteresis loss

Last Answer : B. Minimise eddy current loss

The process of making clay products non-porous and shining is called

Description : The process of making clay products non-porous and shining is called

Last Answer : glazing.

How do you reduce the loss that is produced when light strikes a flat polished end of a fiber optic? A. By painting the surface B. By inclining the surface C. By cooling D. By application of antireflection coating

Description : How do you reduce the loss that is produced when light strikes a flat polished end of a fiber optic? A. By painting the surface B. By inclining the surface C. By cooling D. By application of antireflection coating

Last Answer : D. By application of antireflection coating

When light strikes a flat polished end of a fiber, the fiber loss produced can be reduced by ∙ a. Splicing ∙ b. Antireflection coating ∙ c. Insulation jacket ∙ d. All of these

Description : When light strikes a flat polished end of a fiber, the fiber loss produced can be reduced by ∙ a. Splicing ∙ b. Antireflection coating ∙ c. Insulation jacket ∙ d. All of these

Last Answer : ∙ b. Antireflection coating

When light strikes a flat polished end of a fiber, it produces a loss of ∙ a. 14 % ∙ b. 4 % ∙ c. 10 % ∙ d. 1 %

Description : When light strikes a flat polished end of a fiber, it produces a loss of ∙ a. 14 % ∙ b. 4 % ∙ c. 10 % ∙ d. 1 %

Last Answer : ∙ b. 4 %

Assertion A : Shishum is used for decorative woodwork. Reason R : Shishum can be polished to an excellent finish. Select your answer according to the coding system given below: (A) Both A and R is true and R is the correct explanation of A (B) Both A and R is true but R is not the correct explanation of A (C) A is true but R is false (D) A is false but R is true

Description : Assertion A : Shishum is used for decorative woodwork. Reason R : Shishum can be polished to an excellent finish. Select your answer according to the coding system given below: (A) Both A and R is true and R is the ... explanation of A (C) A is true but R is false (D) A is false but R is true

Last Answer : Answer: Option A

In order to find the specific heat capacity of an unknown material a 50 g piece is heated to 80 degrees Celsius and fully immersed in a well insulated calorimeter filled with 100 g of water at 10 degr?

Description : In order to find the specific heat capacity of an unknown material a 50 g piece is heated to 80 degrees Celsius and fully immersed in a well insulated calorimeter filled with 100 g of water at 10 degr?

Last Answer : Assuming that the full question, which the questioner failed to post, is given in the Discussion, below.Taking the specific heat capacity of water as 4.2 Joules per gram per degree C, the metal has a specific heat capacity as approx 0.68 Joules/(g °C).

What device measures rf power by measuring the heat the rf power generates? A. Calorimeter B. Goniometer C. Spectrum meter D. Oscilloscope

Description : What device measures rf power by measuring the heat the rf power generates? A. Calorimeter B. Goniometer C. Spectrum meter D. Oscilloscope

Last Answer : A. Calorimeter

Which of the following would you measure using a calorimeter? w) specific heat x) weight y) specific gravity z) density

Description : Which of the following would you measure using a calorimeter? w) specific heat x) weight y) specific gravity z) density

Last Answer : ANSWER: W -- SPECIFIC HEAT

Ceramic nuclear metals compared to solid nuclear metals have (A) Higher melting points (B) Low strength at high temperature (C) More chances of radiation damage (D) Poorer corrosion resistance

Description : Ceramic nuclear metals compared to solid nuclear metals have (A) Higher melting points (B) Low strength at high temperature (C) More chances of radiation damage (D) Poorer corrosion resistance

Last Answer : (A) Higher melting points