Normal ploughing up to a depth of about CM. i. 20 c) 15 ii. 14 d) 24

Normal ploughing up to a depth of about CM. i. 20 c) 15 ii. 14 d) 24
by

1 Answer

Answer :

15
by

Related questions

Normal ploughing is a ploughing up to depth of. cm. a. 10. c.15 b. 20. d.25

Description : Normal ploughing is a ploughing up to depth of. cm. a. 10. c.15 b. 20. d.25

Last Answer : 15

A normal ploughing depth is? a 15 cm b30 cm c 40 cm d 100 cm

Description : A normal ploughing depth is? a 15 cm b30 cm c 40 cm d 100 cm

Last Answer : c 40 cm

The draft requirement in MB plough compared to disc plough for same depth of ploughing is: a) Less c) More b) Equal d) None of these

Description : The draft requirement in MB plough compared to disc plough for same depth of ploughing is: a) Less c) More b) Equal d) None of these

Last Answer : More

Puddling is done in standing water of depth. A. 10-15 cm C 20-25 cm B. 5-10 cm D 15-20 cm

Description : Puddling is done in standing water of depth. A. 10-15 cm C 20-25 cm B. 5-10 cm D 15-20 cm

Last Answer : 5-10 cm

is a method of ploughing in which the soil broken and turn along the contours. a. Normal ploughing c. Contour ploughing b. Sub soil plough. d. Disc plough

Description : is a method of ploughing in which the soil broken and turn along the contours. a. Normal ploughing c. Contour ploughing b. Sub soil plough. d. Disc plough

Last Answer : Contour ploughing

Puddling is done in standing water of ——- depth A. 5-10 cm. C. 1-10 cm B. 0-5 cm. D. 10-15 cm

Description : Puddling is done in standing water of ——- depth A. 5-10 cm. C. 1-10 cm B. 0-5 cm. D. 10-15 cm

Last Answer : 5-10 cm

A simply supported beam 6 m long and of effective depth 50 cm, carries a uniformly distributed load 2400 kg/m including its self weight. If the lever arm factor is 0.85 and permissible tensile stress of steel is 1400 kg/cm2 , the area of steel required, is (A) 14 cm(B) 15 cm2(C) 16 cm2(D) 17 cm

Description : A simply supported beam 6 m long and of effective depth 50 cm, carries a uniformly distributed load 2400 kg/m including its self weight. If the lever arm factor is 0.85 and permissible tensile stress of steel is 1400 kg/cm2 ... area of steel required, is (A) 14 cm (B) 15 cm2 (C) 16 cm2 (D) 17 cm

Last Answer : Answer: Option C

The spacing between the discs in the gang bolt ranges cm for lighy duty and cm heavy -duty harrows i. 15-25 and 25-30 c) 40-45 and 45-50 ii. 20-30 and 30-40. d) 15-25 and 32-36

Description : The spacing between the discs in the gang bolt ranges cm for lighy duty and cm heavy -duty harrows i. 15-25 and 25-30 c) 40-45 and 45-50 ii. 20-30 and 30-40. d) 15-25 and 32-36

Last Answer : 15-25 and 25-30

nstrument used for measuring the depth & width of ploughing : A. penetrometer B. width meter C. depth meter D. width and depth meter

Description : nstrument used for measuring the depth & width of ploughing : A. penetrometer B. width meter C. depth meter D. width and depth meter

Last Answer : A. penetrometer

3.0 lbm of air are contained at 25 psia and 100 ˚F. Given that Rair = 53.35 ft-lbf/lbm- ˚F, what is the volume of the container?  A.10.7 ft^3  B.14.7 ft^3  C.15 ft^3  D.24.9 ft^3 Formula: use the ideal gas law pV = mRT T = (100 +460) ˚R V = mRT/p

Description : 3.0 lbm of air are contained at 25 psia and 100 ˚F. Given that Rair = 53.35 ft-lbf/lbm- ˚F, what is the volume of the container?  A.10.7 ft^3  B.14.7 ft^3  C.15 ft^3  D.24.9 ft^3 Formula: use the ideal gas law pV = mRT T = (100 +460) ˚R V = mRT/p

Last Answer : 24.9 ft^3

A subsoiler is used to break a hard pan of soil up to a depth of: a 15 cm b 20 cm c 30 cm d 90 cm

Description : A subsoiler is used to break a hard pan of soil up to a depth of: a 15 cm b 20 cm c 30 cm d 90 cm

Last Answer : d 90 cm

Well irrigation is popular where depth of the water table doesn’t exceed a. 15 mts b. 12 mts c. 20 mts d. 14 mts

Description : Well irrigation is popular where depth of the water table doesn’t exceed a. 15 mts b. 12 mts c. 20 mts d. 14 mts

Last Answer : a. 15 mts

In a telescope the object glass of focal length 14 cm, is located at 20 cm from the diaphragm. The focussing lens is midway between them when a staff 16.50 m away is focussed. The focal length of the focussing lens, is (A) 5.24 cm (B) 6.24 cm (C) 7.24 cm (D) 8.24 cm

Description : In a telescope the object glass of focal length 14 cm, is located at 20 cm from the diaphragm. The focussing lens is midway between them when a staff 16.50 m away is focussed. The focal length of the focussing lens, is (A) 5.24 cm (B) 6.24 cm (C) 7.24 cm (D) 8.24 cm

Last Answer : (C) 7.24 cm

Sides of triangles are (i) 3 cm, 4 cm, 6 cm. (ii) 4 cm, 5 cm, 6 cm. (iii) 7 cm, 24 cm, 25 cm (iv) 5 cm, 12 cm, 14 cm. Which of these is right triangle?(a) (i) (b) (ii) (c) (iii) (d) (iv)

Description : Sides of triangles are (i) 3 cm, 4 cm, 6 cm. (ii) 4 cm, 5 cm, 6 cm. (iii) 7 cm, 24 cm, 25 cm (iv) 5 cm, 12 cm, 14 cm. Which of these is right triangle?(a) (i) (b) (ii) (c) (iii) (d) (iv)

Last Answer : (c) (iii)

A rectangular beam 20 cm wide is subjected to a maximum shearing force of 10,000 kg, the corresponding maximum shearing stress being 30 kg/cm2 . The depth of the beam is (A) 15 cm (B) 20 cm (C) 25 cm (D) 30 cm

Description : A rectangular beam 20 cm wide is subjected to a maximum shearing force of 10,000 kg, the corresponding maximum shearing stress being 30 kg/cm2 . The depth of the beam is (A) 15 cm (B) 20 cm (C) 25 cm (D) 30 cm

Last Answer : (C) 25 cm

A singly reinforced concrete beam of 25 cm width and 70 cm effective depth is provided with 18.75 cm2 steel. If the modular ratio (m) is 15, the depth of the neutral axis, is (A) 20 cm (B) 25 cm (C) 30 cm (D) 35 cm

Description : A singly reinforced concrete beam of 25 cm width and 70 cm effective depth is provided with 18.75 cm2 steel. If the modular ratio (m) is 15, the depth of the neutral axis, is (A) 20 cm (B) 25 cm (C) 30 cm (D) 35 cm

Last Answer : Answer: Option C

The stresses developed in concrete and steel in reinforced concrete beam 25 cm width and 70 cm effective depth, are 62.5 kg/cm2 and 250 kg/cm2 respectively. If m = 15, the depth of its neutral axis is (A) 20 cm (B) 25 cm (C) 30 cm (D) 35 cm

Description : The stresses developed in concrete and steel in reinforced concrete beam 25 cm width and 70 cm effective depth, are 62.5 kg/cm2 and 250 kg/cm2 respectively. If m = 15, the depth of its neutral axis is (A) 20 cm (B) 25 cm (C) 30 cm (D) 35 cm

Last Answer : Answer: Option C

Disc plough is more useful for a) Shallow ploughing b) Fast ploughing c) Deep ploughing d) Slow ploughing

Description : Disc plough is more useful for a) Shallow ploughing b) Fast ploughing c) Deep ploughing d) Slow ploughing

Last Answer :    <!-- [endif] -->Deep ploughing

tractor us used for major operation such as ploughing, harrowing, sowing, harvesting and transporting work. A. Row crop Tractor C. Special purpose tractor B. Crawler tractor D. General purpose tractor

Description : tractor us used for major operation such as ploughing, harrowing, sowing, harvesting and transporting work. A. Row crop Tractor C. Special purpose tractor B. Crawler tractor D. General purpose tractor

Last Answer : General purpose tractor

The power tillage is most suitable for: a) Stationary operation c) Deep ploughing b) Rotary operation d) All are correct

Description : The power tillage is most suitable for: a) Stationary operation c) Deep ploughing b) Rotary operation d) All are correct

Last Answer : Rotary operation

Ploughing is done to : A. Improve soil aeration C. Increase water holding capacity B. Destroy weeds D. All are correct

Description : Ploughing is done to : A. Improve soil aeration C. Increase water holding capacity B. Destroy weeds D. All are correct

Last Answer : All are correct

According to CRIDA 25 to 30 cm ploughing is — a. Shallow b. Medium c. Deep d. None of these

Description : According to CRIDA 25 to 30 cm ploughing is — a. Shallow b. Medium c. Deep d. None of these

Last Answer : c. Deep

For normal cases, stiffness of a simply supported beam is satisfied if the ratio of its span to its overall depth does not exceed (A) 10 (B) 15 (C) 20 (D) 25

Description : For normal cases, stiffness of a simply supported beam is satisfied if the ratio of its span to its overall depth does not exceed (A) 10 (B) 15 (C) 20 (D) 25

Last Answer : Answer: Option C

1, 2, 3, 4, 5, 6, 7, 8, 9, 10, 11, 12, 13, 14, 15, 16, 17, 18, 19, 20, 21, 23, 24, 25, 26, 27, 28, 29, 30, 31, 32, 33, 34, 35, 36, 37, 38, 39, 40, 41, 42, 43, 44, 45, 46, 47, 48, 49, 50'. What number is missing? -Riddles

Description : 1, 2, 3, 4, 5, 6, 7, 8, 9, 10, 11, 12, 13, 14, 15, 16, 17, 18, 19, 20, 21, 23, 24, 25, 26, 27, 28, 29, 30, 31, 32, 33, 34, 35, 36, 37, 38, 39, 40, 41, 42, 43, 44, 45, 46, 47, 48, 49, 50'. What number is missing? -Riddles

Last Answer : 22

24 14 26 ? 28 16 30 a) 13 b) 17 c) 15 d) 11 e) 20

Description : 24 14 26 ? 28 16 30 a) 13 b) 17 c) 15 d) 11 e) 20

Last Answer : The series consists of two series 1 and 2: Series 1 : 24 26 28 30 +2 +2 +2 Series 2 : 14 15 16 +1 +1 Answer: c)

A cube of wood supporting 200 gm mass just floats in water. When the mass is removed, the cube rises by 2 cm the side of the cube will be a.5 cm b.10 cm c.12.5 cm d.20 cm e.15 cm

Description : A cube of wood supporting 200 gm mass just floats in water. When the mass is removed, the cube rises by 2 cm the side of the cube will be a.5 cm b.10 cm c.12.5 cm d.20 cm e.15 cm

Last Answer : a. 5 cm

A jet of water of cross-sectional area 20 sq. cm impinges on a plate at an angle of 60? with a velocity of 10 m/sec. Neglecting the friction between the jet and plate (density of water 1000/9.81 kgm-1 sec2 per cubic meter), the force exerted by the jet on the plate would be in the range a.15 - 20 kg b.20 - 25 kg c.5 - 10 kg d.25 - 30 kg e.10 - 15 kg

Description : A jet of water of cross-sectional area 20 sq. cm impinges on a plate at an angle of 60? with a velocity of 10 m/sec. Neglecting the friction between the jet and plate (density of water 1000/9.81 kgm-1 sec2 per cubic meter), the ... a.15 - 20 kg b.20 - 25 kg c.5 - 10 kg d.25 - 30 kg e.10 - 15 kg

Last Answer : a. 15 - 20 kg

Knife clips are placed with wearing plates spaced from cm apart. A) 10-20cm B) 60-90cm C) 15-25cm D) 20-30cm

Description : Knife clips are placed with wearing plates spaced from cm apart. A) 10-20cm B) 60-90cm C) 15-25cm D) 20-30cm

Last Answer :  20-30cm

The spacing between two adjacent discs in Olpad thresher is a) 5 cm b) 10 cm c) 15 cm d) 20 cm

Description : The spacing between two adjacent discs in Olpad thresher is a) 5 cm b) 10 cm c) 15 cm d) 20 cm

Last Answer : 15 cm

A cantilever of length 2 cm and depth 10 cm tapers in plan from a width 24 cm to zero at its free end. If the modulus of elasticity of the material is 0.2 × 106 N/mm2 , the deflection of the free end, is (A) 2 mm (B) 3 mm (C) 4 mm (D) 5 mm

Description : A cantilever of length 2 cm and depth 10 cm tapers in plan from a width 24 cm to zero at its free  end. If the modulus of elasticity of the material is 0.2 × 106  N/mm2 , the deflection of the free end,  is  (A) 2 mm  (B) 3 mm  (C) 4 mm  (D) 5 mm

Last Answer : (D) 5 mm

Last session of the constituent assembly was held by - (i) 20 January, 1947 (ii) 14 July, 1947 (iii) 24 January, 1950 (iv) 26 January, 1950

Description : Last session of the constituent assembly was held by - (i) 20 January, 1947 (ii) 14 July, 1947 (iii) 24 January, 1950 (iv) 26 January, 1950

Last Answer : (iii) 24 January, 1950

Which of the following is/are correct about shifting cultivation ? 1. It involves no ploughing 2. It is slash and burn agriculture 3. It involves crop rotation 4. It is combined with transhumance (a) I, II, III and IV (b) II, III and IV (c) II and III (d) I and II

Description : Which of the following is/are correct about shifting cultivation ? 1. It involves no ploughing 2. It is slash and burn agriculture 3. It involves crop rotation 4. It is combined with transhumance (a) I, II, III and IV (b) II, III and IV (c) II and III (d) I and II

Last Answer : Ans: (d)

In which of the following ways can soil be conserved? 1. Contour ploughing 2. Terracing 3. Shifting cultivation 4. Crop rotation (a) I, II and IV (b) II, III and IV (c) II and IV (d) I and III shop.ssbcrack.com

Description : In which of the following ways can soil be conserved? 1. Contour ploughing 2. Terracing 3. Shifting cultivation 4. Crop rotation (a) I, II and IV (b) II, III and IV (c) II and IV (d) I and III shop.ssbcrack.com

Last Answer : Ans: (a)

Puddling is done in standing water of depth. b. 10-15cm c. 15-20cm d. None of the above

Description : Puddling is done in standing water of depth. b. 10-15cm c. 15-20cm d. None of the above

Last Answer : Ans - a. 5-10cm

While swimming a depth of 13m in a fresh water lake a fish emits an air bubble of volume 2 mm² atmospheric pressure is 100kpa what is the original pressure of the bubble.  a. 217.17 kpa  b. 119 kpa  c. 326.15 kpa  d. 210 kap Pabs = Pg + Patm

Description : While swimming a depth of 13m in a fresh water lake a fish emits an air bubble of volume 2 mm² atmospheric pressure is 100kpa what is the original pressure of the bubble.  a. 217.17 kpa  b. 119 kpa  c. 326.15 kpa  d. 210 kap Pabs = Pg + Patm

Last Answer : 217.17 kpa

A body is vibrating with simple harmonic motion of aplitude 5 cm frequency 10 vibrations per second. The maximum value of velocity in cm/s will be a.3.14 cm/s b.314 cm/s c.3140 cm/s d.31.4 cm/s e.31400 cm/s

Description : A body is vibrating with simple harmonic motion of aplitude 5 cm frequency 10 vibrations per second. The maximum value of velocity in cm/s will be a.3.14 cm/s b.314 cm/s c.3140 cm/s d.31.4 cm/s e.31400 cm/s

Last Answer : b. 314 cm/s

Which of the following is NOT a value of the standard atmospheric pressure?  A. 1 bar  B. 1 atm  C. 1 kgf/cm^2  D. 14.223 psi

Description : Which of the following is NOT a value of the standard atmospheric pressure?  A. 1 bar  B. 1 atm  C. 1 kgf/cm^2  D. 14.223 psi

Last Answer : 14.223 psi

Painting of weld is done up to (i) 10 CM minimum both side of weld & on welded surface .* (ii) 15 CM minimum both side of weld & on welded surface (iii) 20 CM minimum both side of weld & on welded surface (iv) None of the above

Description : Painting of weld is done up to (i) 10 CM minimum both side of weld & on welded surface .* (ii) 15 CM minimum both side of weld & on welded surface (iii) 20 CM minimum both side of weld & on welded surface (iv) None of the above

Last Answer : (i) 10 CM minimum both side of weld & on welded surface .*

A 8 metre long simply supported rectangular beam which carries a distributed load 45 kg/m. experiences a maximum fibre stress 160 kg/cm2 . If the moment of inertia of the beam is 640 cm4 , the overall depth of the beam is (A) 10 cm (B) 12 cm (C) 15 cm (D) 18 cm

Description : A 8 metre long simply supported rectangular beam which carries a distributed load 45 kg/m. experiences a maximum fibre stress 160 kg/cm2 . If the moment of inertia of the beam is 640 cm4 , the overall depth of the beam is (A) 10 cm (B) 12 cm (C) 15 cm (D) 18 cm

Last Answer : (A) 10 cm

If the depth of moist sand in a cylinder is 15 cm and the depth of the sand when fully inundated with water is 12 cm, the bulking of the moist sand, is (A) 10 % (B) 12 % (C) 15 % (D) 25%

Description : If the depth of moist sand in a cylinder is 15 cm and the depth of the sand when fully inundated with water is 12 cm, the bulking of the moist sand, is (A) 10 % (B) 12 % (C) 15 % (D) 25%

Last Answer : Answer: Option D

Depth of lean concrete bed placed at the bottom of a wall footing, is kept (A) 10 cm (B) 15 cm (C) Equal to its projection beyond wall base (D) Less than its projection beyond wall base

Description : Depth of lean concrete bed placed at the bottom of a wall footing, is kept (A) 10 cm (B) 15 cm (C) Equal to its projection beyond wall base (D) Less than its projection beyond wall base

Last Answer : Answer: Option C

A cage weighing 200 kg is lowered down a mine shaft with uniform acceleration. In the first 5 sec the cage reaches a depth of 20 m. The tension in the cord lowering the cage would be a.836 kg b.167.2 kg c.100 kg d.41.8 kg e.200 kg

Description : A cage weighing 200 kg is lowered down a mine shaft with uniform acceleration. In the first 5 sec the cage reaches a depth of 20 m. The tension in the cord lowering the cage would be a.836 kg b.167.2 kg c.100 kg d.41.8 kg e.200 kg

Last Answer : b. 167.2 kg

A company has to choose between two projects whose cash flows are as indicated below; Project 1: i. Investment – Rs. 15 Lakhs ii. Annual cost savings – Rs. 4 lakhs. iii. Bi-annual maintenance cost – Rs. 50,000/- iv. Reconditioning and overhaul during 5th year: 6 lakhs v. Life of the project – 8 years vi. Salvage value – Rs. 5 lakhs Project 2: vii. Investment – Rs. 14 Lakhs viii. Annual cost savings – Rs. 3.5 lakhs. ix. Annual Maintenance cost – Rs. 20,000/- x. Reconditioning and overhaul during 4th year: 5 lakhs xi. Life of the project – 8 years xii. Salvage Value- 2 lakhs Which project should the company choose? The annual discount rate is 12

Description :  A company has to choose between two projects whose cash flows are as indicated  below; Project 1:  i. Investment - Rs. 15 Lakhs ii. Annual cost savings - Rs. 4 lakhs. iii. Bi-annual ... years xii. Salvage Value- 2 lakhs Which project should the company choose? The annual discount rate is 12

Last Answer : Year Project 1 Project 2 Outgo Saving NPV Outgo Saving NPV 0 15.0 0 =-15.0 14.0 0 = -14 1 0 4.0 = (4 / (1+.12)1 = 3.571 0.2 3.5 = (3.3 / (1+.12)1 = 2.95 2 0.5 4.0 = (3.5 / (1+.12)2 = 2.79 0.2 3.5 ... (1+.12)8 = 3.43 0.2 5.5  (3.5+2) = (5.3 / (1+.12)8 = 2.14 NPV = + 2.301 @12% = + 0.15

Minimum depth of ballast prescribed of Broad Gauge trunk lines of Indian Railways, is A. 20 cm B. 25 cm C. 30 cm D. 35 cm

Description : Minimum depth of ballast prescribed of Broad Gauge trunk lines of Indian Railways, is A. 20 cm B. 25 cm C. 30 cm D. 35 cm

Last Answer : B [25 cm]

The angle subtended by the surface of sewer water with partial flow, at sewer centre is 120°, the depth of sewerage is A. 20 cm B. 25 cm C. 40 cm D. 50 cm

Description : The angle subtended by the surface of sewer water with partial flow, at sewer centre is 120°, the depth of sewerage is A. 20 cm B. 25 cm C. 40 cm D. 50 cm

Last Answer : ANS: D

Sub soilders are operated at maximum depth of (a) 30-40 cm (b) 45-75 cm (c) 75-90 cm (d) 10-20 cm

Description : Sub soilders are operated at maximum depth of (a) 30-40 cm (b) 45-75 cm (c) 75-90 cm (d) 10-20 cm

Last Answer : (b) 45-75 cm

A body whose true weight is 14 kg appears to weigh 15 kg when weighed with the help of a spring balance in a moving lift. The acceleration of the lift at the time was a.1 m/sec2 b.0.7 m/sec2 c.0.5 m/sec2 d.1.4 m/sec2 e.0.35 m/sec2

Description : A body whose true weight is 14 kg appears to weigh 15 kg when weighed with the help of a spring balance in a moving lift. The acceleration of the lift at the time was a.1 m/sec2 b.0.7 m/sec2 c.0.5 m/sec2 d.1.4 m/sec2 e.0.35 m/sec2

Last Answer : b. 0.7 m/sec2

Foot or pedal operated sprayer develops pressure a. 14 to 18kg/cm2 b. 15 to 21 kg/cm2 d. None of above

Description : Foot or pedal operated sprayer develops pressure a. 14 to 18kg/cm2 b. 15 to 21 kg/cm2 d. None of above

Last Answer : Ans-   c. 17 to 21 kg/cm2

Find the change in internal energy of 5 lb. of oxygen gas when the temperature changes from 100 ˚F to 120 ˚F. CV = 0.157 BTU/lbm-˚R  A.14.7 BTU  B.15.7 BTU  C. 16.8 BTU  D. 15.9 BTU Formula: U= mcv T

Description : Find the change in internal energy of 5 lb. of oxygen gas when the temperature changes from 100 ˚F to 120 ˚F. CV = 0.157 BTU/lbm-˚R  A.14.7 BTU  B.15.7 BTU  C. 16.8 BTU  D. 15.9 BTU Formula: U= mcv T

Last Answer : 15.7 BTU