Sub metering data helps to determine which data. a) financial data b) yield data c) system level performance data d) none of the above

Sub metering data helps to determine which data.
a) financial data b) yield data
c) system level performance data d) none of the above
by

1 Answer

Answer :

yield data
by

Related questions

A seed drill with mechanical seed metering device mainly consists of: Frame, Seed box, Seed metering mechanism, drive transmission system, Furrow openers, Covering device, ……, hitch frame and Transport wheels. b. Differential c. U.V joints d. None of the above.

Description : A seed drill with mechanical seed metering device mainly consists of: Frame, Seed box, Seed metering mechanism, drive transmission system, Furrow openers, Covering device, ……, hitch frame and Transport wheels. b. Differential c. U.V joints d. None of the above.

Last Answer : Ans - a. clutch

Seed drill uniformity can be measured by a) Number of seed per rotation of metering unit b) Spacing between seeds c) a and b both d) none of these Ans. c

Description : Seed drill uniformity can be measured by a) Number of seed per rotation of metering unit b) Spacing between seeds c) a and b both d) none of these Ans. c

Last Answer : ans c

This type seed metering mechanism consist of wheel with fine and coarse ribbed flanges. b. fluted feed c. Cup feed d. None of the above

Description : This type seed metering mechanism consist of wheel with fine and coarse ribbed flanges. b. fluted feed c. Cup feed d. None of the above

Last Answer : Ans - a. Internal double run

For sowing of wheat seed, a suitable metering mechanism is: A. Cup feed B. Cell feed C. Fluted roller D. Brush feed

Description : For sowing of wheat seed, a suitable metering mechanism is: A. Cup feed B. Cell feed C. Fluted roller D. Brush feed

Last Answer : Fluted roller

In cup food metering device, the seed rate is controlled by: A. Shaft rotation B. Speed of machine C. Size of cups D. All are correct

Description : In cup food metering device, the seed rate is controlled by: A. Shaft rotation B. Speed of machine C. Size of cups D. All are correct

Last Answer :  Size of cups

The metering mechanism used in potato planter is: A. Fluted roller B. Brush feed type C. Picker wheel type D. Cell feed type

Description : The metering mechanism used in potato planter is: A. Fluted roller B. Brush feed type C. Picker wheel type D. Cell feed type

Last Answer :  Picker wheel type

A metering mechanism that does not required cut-off device is: A. Inclined plate B. Vertical plate C. Horizontal plate D. All are correct

Description : A metering mechanism that does not required cut-off device is: A. Inclined plate B. Vertical plate C. Horizontal plate D. All are correct

Last Answer :  All are correct

The mechanism of a seed drill or fertilizer distributor which delivers seeds or fertilizers from the hopper at selected rates is called . a) Seed drill b) Seed box c) Seed metering mechanism d) Covering device

Description : The mechanism of a seed drill or fertilizer distributor which delivers seeds or fertilizers from the hopper at selected rates is called . a) Seed drill b) Seed box c) Seed metering mechanism d) Covering device

Last Answer : Seed metering mechanism  

is the type of seed metering mechanism. a) Fluted feed type b) Cup feed type c) Brush feed mechanism d) All of above

Description : is the type of seed metering mechanism. a) Fluted feed type b) Cup feed type c) Brush feed mechanism d) All of above

Last Answer : All of above

Plant level information can be found in? a) variable yield data b) energy consumption data c) both A & B d) none of the above

Description : Plant level information can be found in? a) variable yield data b) energy consumption data c) both A & B d) none of the above

Last Answer : energy consumption data

Which of the following types of audits is performed to determine whether an entity's financial statements are fairly stated in conformity with generally accepted accounting principles? a. Operational audit b. Compliance audit c. Performance audit d. Financial statement audit

Description : Which of the following types of audits is performed to determine whether an entity's financial statements are fairly stated in conformity with generally accepted accounting principles? a. Operational audit b. Compliance audit c. Performance audit d. Financial statement audit

Last Answer : Financial statement audit

An objective of a performance audit is to determine whether an entity's a. Operational information is in accordance with government auditing standardsb. Specific operating units arefunctioning economically andefficiently.c. Financial statements present fairly theresults of operations.d. Internal control is adequatelyoperating as designed

Description : An objective of a performance audit is to determine whether an entity's a. Operational information is in accordance with government auditing standards b. Specific operating units are functioning ... present fairly the results of operations. d. Internal control is adequately operating as designed

Last Answer : Specific operating units are functioning economically and efficiently

A typical objective of an operational audit is for the auditor to a. Determine whether the financial statements fairly present the entity's operations. b. Evaluate the feasibility of attaining the entity's operational objectives. c. Make recommendation for improving performance. d. Report on the entity's relative success in maximizing profits

Description : A typical objective of an operational audit is for the auditor to a. Determine whether the financial statements fairly present the entity's operations. b. Evaluate the feasibility of ... recommendation for improving performance. d. Report on the entity's relative success in maximizing profits

Last Answer : Make recommendation for improving performance

Equipment level information is obtained from ____ & ____ a) name plate data & schedule information b) low unit cost & financial data c) Both a & b d) none of the above

Description : Equipment level information is obtained from ____ & ____ a) name plate data & schedule information b) low unit cost & financial data c) Both a & b d) none of the above

Last Answer : name plate data & schedule information

How to determine sub energy level ?

Description : How to determine sub energy level ?

Last Answer : According to wave mechanics, the specific three-dimensional space around the nucleus that has the highest probability of receiving electrons is called the substratum. n = prime quantum number (indicates major energy level) l = ... indicates rotation of electrons) s values of + 1/2 and - 1/2 .

Seed drills differ from the planters in respect of a) metering mechanism b) ground wheel design c) transmission system between ground wheel and roller wheel d) none of the above

Description : Seed drills differ from the planters in respect of a) metering mechanism b) ground wheel design c) transmission system between ground wheel and roller wheel d) none of the above

Last Answer : a) metering mechanism

Planters differ from a seed drill in respect of- (A) kind of power transmission system (B)kind of metering mechanism (C)kind of furrow opener used (D)all of the above

Description : Planters differ from a seed drill in respect of- (A) kind of power transmission system (B)kind of metering mechanism (C)kind of furrow opener used (D)all of the above

Last Answer : (B)kind of metering mechanism

It is the amount or amounts set by the auditor at less than materiality for the financial statements as a whole to reduce to an appropriately low level the probability that the aggregate of uncorrected and undetected misstatements exceeds materiality for the financial statements as a whole. a. Lower materiality b. Lesser materiality c. Performance materiality d. Materiality

Description : It is the amount or amounts set by the auditor at less than materiality for the financial statements as a whole to reduce to an appropriately low level the probability that the aggregate of ... as a whole. a. Lower materiality b. Lesser materiality c. Performance materiality d. Materiality

Last Answer : Performance materiality

Operational audits generally have been conducted by internal and COA auditors, but may be performed by certified public accountants. A primary purpose of an operational audit is to provide: a. A measure of management performance in meeting organizational goalsb. The results of internal examinations of financial and accounting matters to a company's top-level management. c. Aid to the independent-auditor, who is conducting the examination of the financial statements. d. A means of assurance that internal accounting controls are functioning as planned.

Description : Operational audits generally have been conducted by internal and COA auditors, but may be performed by certified public accountants. A primary purpose of an operational audit is to provide: ... statements. d. A means of assurance that internal accounting controls are functioning as planned

Last Answer : A measure of management performance in meeting organizational goals

______ information can be derived from the financial accounting systems - utilities cost centre a) Plant level b) Plant department level c) System level d) Equipment level

Description : ______ information can be derived from the financial accounting systems - utilities cost centre a) Plant level b) Plant department level c) System level d) Equipment level

Last Answer : plant level

The quantity of water retained by the sub-soil against gravity, is known (A) Yield (B) Porosity (C) Specific yield (D) Specific retention

Description : The quantity of water retained by the sub-soil against gravity, is known (A) Yield (B) Porosity (C) Specific yield (D) Specific retention

Last Answer : Answer: Option D

What is the main advantage of transplantation method in rice cultivation? (a) This method ensures maximum utilization of land (b) It is helpful in achieving an economical use of water and a higher yield of grain (c) It helps in early harvesting (d) The draining of water from the field before harvesting is made easy

Description : What is the main advantage of transplantation method in rice cultivation? (a) This method ensures maximum utilization of land (b) It is helpful in achieving an economical use of water and a higher ... helps in early harvesting (d) The draining of water from the field before harvesting is made easy

Last Answer : Ans: (b)

Crop rotation helps to – (1) lessen use of pesticides (2) eliminate parasites which have selective hosts (3) yield more crops (4) produce a greater choice of plant products

Description : Crop rotation helps to – (1) lessen use of pesticides (2) eliminate parasites which have selective hosts (3) yield more crops (4) produce a greater choice of plant products

Last Answer : (2) eliminate parasites which have selective hosts Explanation: The growing of different kinds of crops on a piece of land in a preplanned succession is known as crop rotation. In the rotation of ... This is because weeds and pests are very choosy about the host crop plant, which they attack.

Crop rotation helps to a) lessen use of pesticides b) yield more crops c) produce a greater choice of plant products d) eliminate parasites which have selective hosts

Description : Crop rotation helps to a) lessen use of pesticides b) yield more crops c) produce a greater choice of plant products d) eliminate parasites which have selective hosts

Last Answer : d) eliminate parasites which have selective hosts

The methods or algorithms which are used to increase the performance of disk storage sub-system is called ............. A) Disk performing B) Disk scheduling C) Disk storing D) Disk extending

Description : The methods or algorithms which are used to increase the performance of disk storage sub-system is called ............. A) Disk performing B) Disk scheduling C) Disk storing D) Disk extending

Last Answer : B) Disk scheduling

PEP = (RYEE – current year energy)/RYEE = (23011 – 23834)/23011 = (-) 0.0369 ie (-) 3.7 % …………………….1.5 marks Since the PEP is negative, it implies that the energy conservation measure did not yield reduction in energy consumption, action to be taken to improve the plant performance.

Description : A manufacturing industry plans to improve its energy performance under PAT through  implementation of an energy conservation scheme. After implementation, calculate the  Plant Energy Performance (PEP) with 2015-16 as the ... 34,000 T,   Reference year (2015-16 ) Energy consumption - 27,200 MWh.

Last Answer : Production factor (PF) = 28750/34000 = 0.846 …………………….1 mark Ref year equivalent energy (RYEE) = Ref Year Energy Use (RYEU) x PF   = 27,200 x 0.846= 23011MWh

The lower horizontal line of the refrigeration cycle plotted on pressure-enthalpy-diagram represents (a) condensation of the refrigerant vapour (b) evaporation of the refrigerant liquid (c) compression of the refrigerant vapour (d) metering of the refrigerant liquid

Description : The lower horizontal line of the refrigeration cycle plotted on pressure-enthalpy-diagram represents (a) condensation of the refrigerant vapour (b) evaporation of the refrigerant liquid (c) compression of the refrigerant vapour (d) metering of the refrigerant liquid

Last Answer : Ans: b

In the illustrated electronic governor, the circuit card connected to the potential and current transformers is for ________. EL-0046 A. increasing the signal strength to the governor to maintain constant engine speed with increased load B. send a kilowatt signal to the metering circuit C. shutting down the prime mover in the event of reverse power to protect from motorization D. conditioning the load through the use of a magnetic amplifier current transformer

Description : In the illustrated electronic governor, the circuit card connected to the potential and current transformers is for ________. EL-0046 A. increasing the signal strength to the governor to ... from motorization D. conditioning the load through the use of a magnetic amplifier current transformer

Last Answer : Answer: A

In the illustration, the component labeled 'EXC' is _______. EL-0003 A. a separate class II regulated DC generator for critical direct current loads B. a generator feeding the FLD winding through the voltage regulator. C. the controller to drive the governor for turbogenerator speed. D. the electronic driver for the switchboard metering circuits

Description : In the illustration, the component labeled 'EXC' is _______. EL-0003 A. a separate class II regulated DC generator for critical direct current loads B. a generator feeding the FLD ... to drive the governor for turbogenerator speed. D. the electronic driver for the switchboard metering circuits

Last Answer : Answer: B

What type of service is NOT provided by the circuit shown in the illustration? EL-0094 A. Logging of engine order signals from the bridge. B. Printed record of alarms as they occur. C. Visual metering of temperature and pressure conditions. D. Periodic recording of pressure and temperature conditions.

Description : What type of service is NOT provided by the circuit shown in the illustration? EL-0094 A. Logging of engine order signals from the bridge. B. Printed record of alarms as they ... . Visual metering of temperature and pressure conditions. D. Periodic recording of pressure and temperature conditions.

Last Answer : Answer: A

The mechanism which picks up seeds from the seed box and delivers them in to the seed tube is known as? [a] Seed Enhancer Mechanism [b] Seed Metering Mechanism [c] Seed Placing Mechanism [d] Seed Augmenting Mechanism [e] None of the above

Description : The mechanism which picks up seeds from the seed box and delivers them in to the seed tube is known as? [a] Seed Enhancer Mechanism [b] Seed Metering Mechanism [c] Seed Placing Mechanism [d] Seed Augmenting Mechanism [e] None of the above

Last Answer : [d] Seed Augmenting Mechanism

What condition produces the 10-kHz error signal generated by the metering bridge in the HP- 431C power meter?

Description : What condition produces the 10-kHz error signal generated by the metering bridge in the HP- 431C power meter?

Last Answer : An unbalance in the metering bridge.

Cut-off device is not required with (a) Inclined plate metering (b) Horizontally plate metering (c) Vertically plate metering (d) All of the above

Description : Cut-off device is not required with (a) Inclined plate metering (b) Horizontally plate metering (c) Vertically plate metering (d) All of the above

Last Answer : (a) Inclined plate metering

Variation in the drop size of seed can be minimised by (a) Using a short, smooth, small diameter tube with the discharge end close to bottom of furrow. (b) Discharging the seed directly from the metering device within a few centimetres of the furrow bottom. (c) Mechanically transferring the seeds from the metering unit in the furrow. (d) All of the above.

Description : Variation in the drop size of seed can be minimised by (a) Using a short, smooth, small diameter tube with the discharge end close to bottom of furrow. (b) Discharging the seed directly from ... (c) Mechanically transferring the seeds from the metering unit in the furrow. (d) All of the above.

Last Answer : d) All of the above.

Seed damage due to cut-off not a problem in (a) Horizontal plate metering mechanism (b) Vertical plate metering mechanism (c) Both (a) and (b) (d) Inclined plate metering mechanism

Description : Seed damage due to cut-off not a problem in (a) Horizontal plate metering mechanism (b) Vertical plate metering mechanism (c) Both (a) and (b) (d) Inclined plate metering mechanism

Last Answer : (d) Inclined plate metering mechanism

The metering mechanism which is suitable for the metering of small seeds as well as large grains. (a) Internal double run mechanism (b) Fluted wheel mechanism (c) Stationary opening with auger (d) None of the above

Description : The metering mechanism which is suitable for the metering of small seeds as well as large grains. (a) Internal double run mechanism (b) Fluted wheel mechanism (c) Stationary opening with auger (d) None of the above

Last Answer : (a) Internal double run mechanism

The metering mechanism which is most suitable for metering of small seed is to handle is a. Internal double run mechanism b. Fluted wheel mechanism c. Stationery opening with agitator d. None of the above

Description : The metering mechanism which is most suitable for metering of small seed is to handle is a. Internal double run mechanism b. Fluted wheel mechanism c. Stationery opening with agitator d. None of the above

Last Answer : b. Fluted wheel mechanism

Most commonly used for the metering mechanism for fertilizer a. Spur wheel b. Serrated wheel c. Star wheel d. Auger type

Description : Most commonly used for the metering mechanism for fertilizer a. Spur wheel b. Serrated wheel c. Star wheel d. Auger type

Last Answer : a. Spur wheel

Most commonly used metering device for bulk flow seed metering of small and medium size seeds (grains) a) Fluted wheel b) Internal double run c) Stationary opening with agitator d) None of the above

Description : Most commonly used metering device for bulk flow seed metering of small and medium size seeds (grains) a) Fluted wheel b) Internal double run c) Stationary opening with agitator d) None of the above

Last Answer : a) Fluted wheel

The average spacing of seeds or hills in field is obtained or determined by a) The ratio of linear or peripheral speed of seed pick up units (cells fingers, etc) to the forward speed of the planter b) The distance between the speed pick up units (cells) on the metering unit c) Both (a) and (b) d) None of the above

Description : The average spacing of seeds or hills in field is obtained or determined by a) The ratio of linear or peripheral speed of seed pick up units (cells fingers, etc) to the forward speed of the planter b) The distance ... up units (cells) on the metering unit c) Both (a) and (b) d) None of the above

Last Answer : c) Both (a) and (b)

Draw sketches showing fuel metering in the inline type F. I. P. and explain its working.

Description : Draw sketches showing fuel metering in the inline type F. I. P. and explain its working.

Last Answer : Fuel Metering in inline type fuel injection pump: The position of the plunger in the fuel injection pump can be varied by means of a control rod having a rack and pinion arrangement. By operating ... (vi) shows that no fuel is being supplied to the injector; i. e. the engine has stopped.

i really want to achive that goal,the goal is to reach 100 subscribers,plz go and subscribe,it really helps!,here is the name,go to youtube and type this "stopmotion zclips",write it as i wrote it.plz sub?

Description : i really want to achive that goal,the goal is to reach 100 subscribers,plz go and subscribe,it really helps!,here is the name,go to youtube and type this "stopmotion zclips",write it as i wrote it.plz sub?

Last Answer : Hey, my friend, I know your situation. But be strong and I like to share some valuable ideas with you. So that you can upgrade your goal 100 to 1000, 1000 to 10000, and up to 1 million ... video. It means you have to share your content (video) on other social media and platforms naturally. Underst

Recuperation test is carried out to determine (A) Turbidity of water (B) pH value of water (C) Yield of well (D) Discharge from a well

Description : Recuperation test is carried out to determine  (A) Turbidity of water  (B) pH value of water  (C) Yield of well  (D) Discharge from a well 

Last Answer : (A) Turbidity of water 

Sub zero treatment of steel is done to (A) Suppress martensite transformation (B) Enhance its working performance in sub zero atmosphere (C) Reduce the retained austenite in hardened steel (D) Induce temper brittleness after its hardening

Description : Sub zero treatment of steel is done to (A) Suppress martensite transformation (B) Enhance its working performance in sub zero atmosphere (C) Reduce the retained austenite in hardened steel (D) Induce temper brittleness after its hardening

Last Answer : Option C

Which of the following helps a marketer determine how much to order? A) Order lead time B) EOQ C) Reorder point D) Fixed order -interval approach E) Electronic inventory system

Description : Which of the following helps a marketer determine how much to order? A) Order lead time B) EOQ C) Reorder point D) Fixed order-interval approach E) Electronic inventory system

Last Answer : B) EOQ

Where can I find a financial institution that has/accepts high yield bonds?

Description : Where can I find a financial institution that has/accepts high yield bonds?

Last Answer : Most banks in this economy will turn you down when it comes to the high yield bonds, due to the risk they must take. Your best bet is to check with your current financial institution, and they might accept these with a savings account as insurance.

The application of plastic mulch? 1. Reduces the surface evaporation 2. Increases the yield of cabbage crop moisture 3.both of these 4. none of these

Description : The application of plastic mulch? 1. Reduces the surface evaporation 2. Increases the yield of cabbage crop moisture 3.both of these 4. none of these

Last Answer : ans 3

The software that helps the computer in maintaining its performance is called ………….. -Technology

Description : The software that helps the computer in maintaining its performance is called ………….. -Technology

Last Answer : The software that helps the computer in maintaining its performance is calledUtility software.

31. Replacement of steam based hot water generation by solar system is an example of a) Matching energy usage to the requirement b) Maximising system efficiency c) Energy substitution d) Performance improvement

Description : Replacement of steam based hot water generation by solar system is an example of a) Matching energy usage to the requirement b) Maximising system efficiency c) Energy substitution d) Performance improvement

Last Answer : Energy substitution