While increasing the forward speed of the combine harvester speed of reel should be a) Increased in same ratio b) Decreased in same ratio c) No changes d) Doubled Ans. a

While increasing the forward speed of the combine harvester speed of reel should be a) Increased in same ratio b) Decreased in same ratio c) No changes d) Doubled Ans. a
by

1 Answer

Answer :

ans a
by

Related questions

The ratio of reel peripheral speed to forward speed of combine is called (a)velocity index (b)angular velocity index (c)reel speed index (d) kinematic index

Description : The ratio of reel peripheral speed to forward speed of combine is called (a)velocity index (b)angular velocity index (c)reel speed index (d) kinematic index

Last Answer : (c)reel speed index

The ratio of real peripheral speed to forward speed of combine is called :- a) Velocity index b) Angular velocity index C) Reel speed index d) kinematic index

Description : The ratio of real peripheral speed to forward speed of combine is called :- a) Velocity index b) Angular velocity index C) Reel speed index d) kinematic index

Last Answer : C) Reel speed

Self-propelled combine harvester is provide with a) Powering engine b) Petrol engine c) Diesel engine d) Kerosene engine

Description : Self-propelled combine harvester is provide with a) Powering engine b) Petrol engine c) Diesel engine d) Kerosene engine

Last Answer : Diesel engine

The following is not a farm machinery a) Combine harvester b) Power tiller c) Fresher d) Dumper trucks

Description : The following is not a farm machinery a) Combine harvester b) Power tiller c) Fresher d) Dumper trucks

Last Answer :  Dumper trucks

In a flail harvester, the cutting operation is performed by a) Horizontally rotating circular blades b) Vertically rotating circular blades c) Knives mounted on a horizontal shaft d) Knives mounted on a vertical shaft Ans. c

Description : In a flail harvester, the cutting operation is performed by a) Horizontally rotating circular blades b) Vertically rotating circular blades c) Knives mounted on a horizontal shaft d) Knives mounted on a vertical shaft Ans. c

Last Answer : ans c

In a combine harvester the peripheral speed of the cylinder ranges between ________ m/min.

Description : In a combine harvester the peripheral speed of the cylinder ranges between ________ m/min.

Last Answer : 1200 to 1500

The seed rate can be increased by a) Decreasing the exposure length b) Increasing the exposure length c) Increasing speed d) Decreasing speed Ans. b

Description : The seed rate can be increased by a) Decreasing the exposure length b) Increasing the exposure length c) Increasing speed d) Decreasing speed Ans. b

Last Answer : ans b

In a thresher, by increasing the speed of threshing cylinder a) Threshing efficiency can be increased b) Broken grain loss can be minimized c) Un-threshed grains can be increased d) Straw breakup can be increased Ans. a

Description : In a thresher, by increasing the speed of threshing cylinder a) Threshing efficiency can be increased b) Broken grain loss can be minimized c) Un-threshed grains can be increased d) Straw breakup can be increased Ans. a

Last Answer : ans a

An ideal gas is maintained at constant temperature. If the pressure on the gas is doubled, the volume is  a. increased fourfold  b. doubled  c. reduced by half  d. decreased by a quarter

Description : An ideal gas is maintained at constant temperature. If the pressure on the gas is doubled, the volume is  a. increased fourfold  b. doubled  c. reduced by half  d. decreased by a quarter

Last Answer : reduced by half

On average how much does a combine harvester cost to operate?

Description : On average how much does a combine harvester cost to operate?

Last Answer : This will really depend on how large of a farm you have. A rough estimate on the daily cos of opration of a combine harvester is $117 but the variables are endless.

The traction on rear wheels can be increased by increasing a) Weight on rear wheels b) Weight on front wheels c) Decreasing inflation pressure d) Both a and c Ans. d

Description : The traction on rear wheels can be increased by increasing a) Weight on rear wheels b) Weight on front wheels c) Decreasing inflation pressure d) Both a and c Ans. d

Last Answer : ans d

In a sprayer overlapping can be increased by increasing a) Nozzle diameter b) Pressure c) Discharge d) Height of nozzle Ans. d

Description : In a sprayer overlapping can be increased by increasing a) Nozzle diameter b) Pressure c) Discharge d) Height of nozzle Ans. d

Last Answer : ans d

The penetration of a tandem disc harrow can be increased by a) Increasing tilt angle b) Increasing disc angle c) Increasing disc diameter d) All of the above Ans.c

Description : The penetration of a tandem disc harrow can be increased by a) Increasing tilt angle b) Increasing disc angle c) Increasing disc diameter d) All of the above Ans.c

Last Answer : Ans.c

If the length of a simple pendulum is halved then its period of oscillation is - (1) doubled (2) halved (3) increased by a factor √ 2 (4) decreased by a factor √ 2

Description : If the length of a simple pendulum is halved then its period of oscillation is - (1) doubled (2) halved (3) increased by a factor √ 2 (4) decreased by a factor √ 2

Last Answer : (4) decreased by a factor √ 2

If the length of a simple pendulum is halved then its period of oscillation is (1) doubled (2) halved (3) increased by a factor 2 (4) decreased by a factor 2

Description : If the length of a simple pendulum is halved then its period of oscillation is (1) doubled (2) halved (3) increased by a factor root 2 (4) decreased by a factor root  2

Last Answer : decreased by a factor root 2

Tower diameter may be decreased by (A) Using higher reflux ratio (B) Use of increased tray spacing (C) Increasing the liquid flow rate (D) Increasing the vapour flow rate

Description : Tower diameter may be decreased by (A) Using higher reflux ratio (B) Use of increased tray spacing (C) Increasing the liquid flow rate (D) Increasing the vapour flow rate

Last Answer : (B) Use of increased tray spacing

For a cold dilute feed to produce thick viscous liquor, backward feeding as compared to forward feeding results in (A) Increased economy (B) Decreased economy (C) Lower capacity (D) No effect on economy

Description : For a cold dilute feed to produce thick viscous liquor, backward feeding as compared to forward feeding results in (A) Increased economy (B) Decreased economy (C) Lower capacity (D) No effect on economy

Last Answer : (A) Increased economy

For hot feed, forward feeding as compared to backward feeding results in __________ economy. (A) Increased (B) Decreased (C) No effect on (D) None of these

Description : For hot feed, forward feeding as compared to backward feeding results in __________ economy. (A) Increased (B) Decreased (C) No effect on (D) None of these

Last Answer : (A) Increased

The adjustment in MB plough for increasing the depth of operation a) Vertical suction b) Horizontal suction c) Gang angle d) Disc angle Ans. a

Description : The adjustment in MB plough for increasing the depth of operation a) Vertical suction b) Horizontal suction c) Gang angle d) Disc angle Ans. a

Last Answer : ans a

.total grain loss in a combine increase with a. increase in forward speed b. decrease in stubble Hight c. increase in concave clearance d. all of the above

Description : .total grain loss in a combine increase with a. increase in forward speed b. decrease in stubble Hight c. increase in concave clearance d. all of the above

Last Answer : .total grain loss in a combine increase with a. increase in forward speed b. decrease in stubble Hight c. increase in concave clearance d. all of the above

A loss of field excitation to an AC generator while operating in parallel will cause it to ____________. A. absorb more and more load due to decreased armature reaction B. lose its load due to the inherent speed droop built into the governor C. smoke and overload due to field flashover as residual field flux changes polarity D. lose its load, begin to motorize, trip out on reverse power relay, and possibly overspeed

Description : A loss of field excitation to an AC generator while operating in parallel will cause it to ____________. A. absorb more and more load due to decreased armature reaction B. lose its load due to ... polarity D. lose its load, begin to motorize, trip out on reverse power relay, and possibly overspeed

Last Answer : Answer: D

Working width of disc plough can be increased by a) Disc angle b) Gang angle c) Vertical suction d) Horizontal clearance Ans. a

Description : Working width of disc plough can be increased by a) Disc angle b) Gang angle c) Vertical suction d) Horizontal clearance Ans. a

Last Answer : ans a

In vertical conveyor reaper, the crop to be harvested are guided by a) Star wheel b) Reel c) Row divider d) Cutter bar

Description : In vertical conveyor reaper, the crop to be harvested are guided by a) Star wheel b) Reel c) Row divider d) Cutter bar

Last Answer : Star wheel

Flat footed camels can walk easily in sandy deserts because - (1) pressure on the sand is decreased by increasing the area of the surface in contact (2) pressure on the sand is increased by increasing the area of the surface in contact (3) pressure on the sand is decreased by decreasing the area of the surface in contact (4) pressure on the sand is increased by decreasing the area of the surface in contact

Description : Flat footed camels can walk easily in sandy deserts because - (1) pressure on the sand is decreased by increasing the area of the surface in contact (2) pressure on the sand is increased by ... in contact (4) pressure on the sand is increased by decreasing the area of the surface in contact

Last Answer : (1) pressure on the sand is decreased by increasing the area of the surface in contact Explanation: Camels have broad, flat, leathery pads with two toes on each foot. When the camel places its foot on ... the animal on loose sand in much the same way that a snowshoe helps a person walk on snow.

Increasing the liquor level in the evaporator results in the (A) Decreased capacity (B) Increase in liquor film co-efficient (C) Decreased effect of hydrostatic head (D) Increased true temperature drop

Description : Increasing the liquor level in the evaporator results in the (A) Decreased capacity (B) Increase in liquor film co-efficient (C) Decreased effect of hydrostatic head (D) Increased true temperature drop

Last Answer : (A) Decreased capacity

Which of the following best explains why the melting points of saturated fats increase with increasing molecular weight? (a) decreased hydrogen bonding (b) increased hydrogen bonding (c) decreased intermolecular van der Waal’s interactions (d) increased intermolecular van der Waal’s interactions

Description : Which of the following best explains why the melting points of saturated fats increase with increasing molecular weight? (a) decreased hydrogen bonding (b) increased hydrogen bonding (c) decreased intermolecular van der Waal’s interactions (d) increased intermolecular van der Waal’s interactions

Last Answer : increased intermolecular van der Waal’s interactions

Flat footed camels can walk easily in sandy deserts because (1) pressure on the sand is decreased by increasing the area of the surface in contact (2) pressure on the sand is increased by increasing the area of the surface in contact (3) pressure on the sand is decreased by decreasing the area of the surface in contact (4) pressure on the sand is increased by decreasing the area of the surface in contact

Description : Flat footed camels can walk easily in sandy deserts because (1) pressure on the sand is decreased by increasing the area of the surface in contact (2) pressure on the sand is increased by increasing ... in contact (4) pressure on the sand is increased by decreasing the area of the surface in contact

Last Answer : pressure on the sand is decreased by increasing the area of the surface in contact

Pick out the wrong statement (A) A horizontal line on the humidity chart indicates the temperature changes at constant molal humidity (B) When water is cooled from 80 to 70°C by exposure to the air with a wet bulb temperature of 60°C, then both the approach & the range would be 10°C (C) For unsaturated air-water vapor mixture at atmospheric conditions, the wet bulb temperature & adiabatic cooling lines are the same (D) Relative saturation of unsaturated mixture of water vapor & air cannot be increased by either reducing the mixture temperature or by increasing the total pressure

Description : Pick out the wrong statement (A) A horizontal line on the humidity chart indicates the temperature changes at constant molal humidity (B) When water is cooled from 80 to 70°C by exposure ... & air cannot be increased by either reducing the mixture temperature or by increasing the total pressure

Last Answer : (D) Relative saturation of unsaturated mixture of water vapor & air cannot be increased by either reducing the mixture temperature or by increasing the total pressure

Blood chemistry shows the following changes in compensated respiratory acidosis: (A) Increased pCO2 (B) Increased bicarbonate (C) Decreased chloride (D) All of these

Description : Blood chemistry shows the following changes in compensated respiratory acidosis: (A) Increased pCO2 (B) Increased bicarbonate (C) Decreased chloride (D) All of these

Last Answer : Answer : D

During compensation of respiratory alkalosis, all the following changes occur except (A) Decreased secretion of hydrogen ions by renal tubules (B) Increased excretion of sodium in urine (C) Increased excretion of bicarbonate in urine (D) Increased excretion of ammonia in urine

Description : During compensation of respiratory alkalosis, all the following changes occur except (A) Decreased secretion of hydrogen ions by renal tubules (B) Increased excretion of sodium in urine (C) Increased excretion of bicarbonate in urine (D) Increased excretion of ammonia in urine

Last Answer : Answer : D

All the following changes in blood chemistry can occur in severe diarrhoea except (A) Decreased pH (B) Decreased bicarbonate (C) Increased pCO2 (D) Increased chloride WATER AND ELECTROLYTE BALANCE 287

Description : All the following changes in blood chemistry can occur in severe diarrhoea except (A) Decreased pH (B) Decreased bicarbonate (C) Increased pCO2 (D) Increased chloride WATER AND ELECTROLYTE BALANCE 287

Last Answer : Answer : C

Choose the correct statement regarding thermal cracking. (A) Moderate changes in operating temperature does not change the depth of cracking (B) Increased residence time results in the decreased severity of cracking (C) At low pressure, the yield of lighter hydrocarbons are more (D) Greater depth of cracking gives lower octane number gasoline

Description : Choose the correct statement regarding thermal cracking. (A) Moderate changes in operating temperature does not change the depth of cracking (B) Increased residence time results in the decreased ... of lighter hydrocarbons are more (D) Greater depth of cracking gives lower octane number gasoline

Last Answer : (D) Greater depth of cracking gives lower octane number gasoline

The number of revolutions through which a pulley will rotate from rest if its angular acceleration is increased uniformly from zero to 12 rad per sec2 during 4 sec and then uniformly decreased to 0 rad per sec2 during the next 3 sec would be a.46.4 b.26.74 c.11.6 d.3.2 e.17.7

Description : The number of revolutions through which a pulley will rotate from rest if its angular acceleration is increased uniformly from zero to 12 rad per sec2 during 4 sec and then uniformly decreased to 0 rad per sec2 during the next 3 sec would be a.46.4 b.26.74 c.11.6 d.3.2 e.17.7

Last Answer : b. 26.74

A clock with a second pendulum is gaining 5 minutes a day. To correct it a.The eccentricity of bob with pendulum should be decreased b.The length of the pendulum should be decreased c.The length of pendulum should not be changed d.The length of the pendulum should be increased e.The eccentricity of bon with pendulum should be increased

Description : A clock with a second pendulum is gaining 5 minutes a day. To correct it a.The eccentricity of bob with pendulum should be decreased b.The length of the pendulum should be decreased c.The ... .The length of the pendulum should be increased e.The eccentricity of bon with pendulum should be increased

Last Answer : d. The length of the pendulum should be increased

The efficiency of Diesel cycle approaches to Otto cycle efficiency when  A. cut-off is increased  B. cut-off is decreased  C. cut-off is zero  D. cut-off is constant

Description : The efficiency of Diesel cycle approaches to Otto cycle efficiency when  A. cut-off is increased  B. cut-off is decreased  C. cut-off is zero  D. cut-off is constant

Last Answer : Answer: C

If the Kelvin temperature of an ideal gas is doubled, what happens to the rms speed of the molecules in the gas?  a. it increases by a factor of square root of 2  b. it increases by a factor of 2  c. it increases by factor of 4  d. none of the above

Description : If the Kelvin temperature of an ideal gas is doubled, what happens to the rms speed of the molecules in the gas?  a. it increases by a factor of square root of 2  b. it increases by a factor of 2  c. it increases by factor of 4  d. none of the above

Last Answer : it increases by a factor of square root of 2

If radius of a batch basket centrifuge is halved & the r.p.m. is doubled, then the (A) Linear speed of the basket is doubled (B) Linear speed of the basket is halved (C) Centrifugal force is doubled (D) Capacity of centrifuge is increased

Description : If radius of a batch basket centrifuge is halved & the r.p.m. is doubled, then the (A) Linear speed of the basket is doubled (B) Linear speed of the basket is halved (C) Centrifugal force is doubled (D) Capacity of centrifuge is increased

Last Answer : (C) Centrifugal force is doubled

machine designed for harvesting, threshing , cleaning and collecting grains while moving through standing crops. a) Combine b) Self operated VCR c) Power roller thresher d) Post harvesting technology

Description : machine designed for harvesting, threshing , cleaning and collecting grains while moving through standing crops. a) Combine b) Self operated VCR c) Power roller thresher d) Post harvesting technology

Last Answer : Combine 

Momentum of two objects moving with same speed but in opposite direction upon collision is A. increased B. decreased C. is zero D. is infinite

Description : Momentum of two objects moving with same speed but in opposite direction upon collision is A. increased B. decreased C. is zero D. is infinite

Last Answer : is zero

Neil Armstrong was the first person to reach on the moon. While walking on the moon (a) His mass remained the same but weight increased (b) His mass remained the same but weight decreased (c) His mass as well as weight decreased (d) His mass increased but weight remained the same

Description : Neil Armstrong was the first person to reach on the moon. While walking on the moon (a) His mass remained the same but weight increased (b) His mass remained the same but weight decreased (c) His mass as well as weight decreased (d) His mass increased but weight remained the same

Last Answer : Ans:(a)

Collection of book debts----- a) Has no effect on current ratio b) Has decreased in current ratio c) Has increased in current ratio d) None of these

Description : Collection of book debts----- a) Has no effect on current ratio b) Has decreased in current ratio c) Has increased in current ratio d) None of these

Last Answer : a) Has no effect on current ratio

Choke in a I.C. engine is used to control a) Camshaft speed b) Specific fuel consumption c) Air fuel mixture d) Crankshaft speed Ans. c

Description : Choke in a I.C. engine is used to control a) Camshaft speed b) Specific fuel consumption c) Air fuel mixture d) Crankshaft speed Ans. c

Last Answer : ans c

During turning the traction while operating MB plough a) Plough should be lifted b) Plough should not be lifted c) Stop the tractor and lift the plough d) Unable to lift Ans. a

Description : During turning the traction while operating MB plough a) Plough should be lifted b) Plough should not be lifted c) Stop the tractor and lift the plough d) Unable to lift Ans. a

Last Answer : ans a

A boy sitting in a rail road car throws a ball straight up into the air. The ball will fall back into his hands when the rail road car is a.moving at constant velocity b.accelerating forward while going around a curve of radius equal to the maximum height attained by the ball c.107 dynes d.accelerating forwardA block A is dropped down a smooth inclined plane, while another identical block B is released for free fall from the same height e.decelerating

Description : A boy sitting in a rail road car throws a ball straight up into the air. The ball will fall back into his hands when the rail road car is a.moving at constant velocity b.accelerating ... inclined plane, while another identical block B is released for free fall from the same height e.decelerating

Last Answer : a. moving at constant velocity

If depth of a beam is doubled then changes in its section modulus a. Will remain same b. Will decrease c. Will be doubled d. Will increase by 4 times

Description : If depth of a beam is doubled then changes in its section modulus a. Will remain same b. Will decrease c. Will be doubled d. Will increase by 4 times

Last Answer : d. Will increase by 4 times

What is a rain water harvester? -SST 10th

Description : What is a rain water harvester? -SST 10th

Last Answer : It is a storage tank usually fitted underground to your down pipes coming from the roof. Rainwater enters the tank through a filter which removes the leaves and other debris. The system contains a ... have a larger roof space and higher percentage of water use that can be replaced by rain water.

What is Harvester Restaurants Mission Statement?

Description : What is Harvester Restaurants Mission Statement?

Last Answer : Need answer

Resilience of a bolt can be increased by increasing its (A) Length (B) Shank diameter (C) Head diameter (D) None of these

Description : Resilience of a bolt can be increased by increasing its (A) Length (B) Shank diameter (C) Head diameter (D) None of these

Last Answer : (A) Length