In vertical conveyor reaper, the crop to be harvested are guided by a) Star wheel b) Reel c) Row divider d) Cutter bar

In vertical conveyor reaper, the crop to be harvested are guided by a) Star wheel b) Reel c) Row divider d) Cutter bar
by

1 Answer

Answer :

Star wheel
by

Related questions

enght of cutter bar for the tractor operated mower or vertical conveyor reaper is..... (a) 1.5-3.0m (b) 3.0-4.5m (c)4.5-5.5m (d) >5.5m

Description : enght of cutter bar for the tractor operated mower or vertical conveyor reaper is..... (a) 1.5-3.0m (b) 3.0-4.5m (c)4.5-5.5m (d) >5.5m

Last Answer : (a) 1.5-3.0m

are the labelling of cutter bar. a) Shoe, ledger plate, wearing plate, knife, knife section, etc. b) Star wheel, engine, cage wheel, etc. c) both A & B d) Conveyor belt, cutter bar, rivers, etc

Description : are the labelling of cutter bar. a) Shoe, ledger plate, wearing plate, knife, knife section, etc. b) Star wheel, engine, cage wheel, etc. c) both A & B d) Conveyor belt, cutter bar, rivers, etc

Last Answer : Shoe, ledger plate, wearing plate, knife, knife section, etc.

Vertical conveyor reaper is mostly used for paddy and………... b. Soybean c. Ground nut d. None of above

Description : Vertical conveyor reaper is mostly used for paddy and………... b. Soybean c. Ground nut d. None of above

Last Answer : Ans-    a. wheat

is not well register, there is unbalance load, uneven harvesting and exclusive clogging of crops on the knife A) Vertical conveyor reaper B) MOVER C) Reaper binder D) Potato digger elevator.

Description : is not well register, there is unbalance load, uneven harvesting and exclusive clogging of crops on the knife A) Vertical conveyor reaper B) MOVER C) Reaper binder D) Potato digger elevator.

Last Answer : MOVER

Capacity of vertical conveyor reaper is A) 0.1-0.9 ha/h B) 10-20 ha/h C) 0.4-0.6 ha/h D) 1-2 ha/h

Description : Capacity of vertical conveyor reaper is A) 0.1-0.9 ha/h B) 10-20 ha/h C) 0.4-0.6 ha/h D) 1-2 ha/h

Last Answer : 0.4-0.6 ha/h

To separate grains from the harvested crop and provide clean grain without much loss and damage which called as A) Potato digger elevator B) Groundnut digger shaker C) Reaper binder D) Threshing

Description : To separate grains from the harvested crop and provide clean grain without much loss and damage which called as A) Potato digger elevator B) Groundnut digger shaker C) Reaper binder D) Threshing

Last Answer : Threshing

From the following which material handling equipment is used in Robot centered layout of FMS a.Industrial Robot b.Conveyor systems c.Rail guided vehicle system d.None of the above

Description : From the following which material handling equipment is used in Robot centered layout of FMS a.Industrial Robot b.Conveyor systems c.Rail guided vehicle system d.None of the above

Last Answer : a.Industrial Robot

is the range of capacity of Vertical Conveyer reaper a) 0.1- 0.5 ha/h b) 0.4-0.6 ha/h c) 10-15 ha/h d) None of the above

Description : is the range of capacity of Vertical Conveyer reaper a) 0.1- 0.5 ha/h b) 0.4-0.6 ha/h c) 10-15 ha/h d) None of the above

Last Answer :  0.4-0.6 ha/h

knives of the cutter bar are scrratedin order to a)Increase the co-efficient of friction between crop stalk machine b)Reducing the deflection of stalk side ways c)To increase the cutting speed d)To improve cutting height

Description : knives of the cutter bar are scrratedin order to a)Increase the co-efficient of friction between crop stalk machine b)Reducing the deflection of stalk side ways c)To increase the cutting speed d)To improve cutting height

Last Answer : a)Increase the co-efficient of friction between crop stalk machine

It is a machine to separate grains from the harvested crop and provide clean grain without much loss and damage. a. Weeder c. mower d. None of above

Description : It is a machine to separate grains from the harvested crop and provide clean grain without much loss and damage. a. Weeder c. mower d. None of above

Last Answer : Ans-                              b. thresher  

Alignment of cutter bar is a) Aligning centers of guard and knife b) Keeping cutter bur in 88 degrees c) Both d) None of these Ans. b

Description : Alignment of cutter bar is a) Aligning centers of guard and knife b) Keeping cutter bur in 88 degrees c) Both d) None of these Ans. b

Last Answer : ans b

Registration of cutter bar is a) Aligning centers of guard and knife b) Keeping cutter bur in 88 degrees c) Both d) None of these Ans. a

Description : Registration of cutter bar is a) Aligning centers of guard and knife b) Keeping cutter bur in 88 degrees c) Both d) None of these Ans. a

Last Answer : ans a

cutter bar knife a) triangular shape b) square shape c) trapezoidal shape d) curved shape Ans. c

Description : cutter bar knife a) triangular shape b) square shape c) trapezoidal shape d) curved shape Ans. c

Last Answer : ans c

Registration of a cutter bar means a) Centre of knife must stop in the centre of guard on each stroke b) Centre of knife should be ahead of guard c) Centre of knife should be behind the guard d) Centre of knife should be at the end of the guard

Description : Registration of a cutter bar means a) Centre of knife must stop in the centre of guard on each stroke b) Centre of knife should be ahead of guard c) Centre of knife should be behind the guard d) Centre of knife should be at the end of the guard

Last Answer : ans a

The cutter bar is set at about to the direction of motion in order to overcome the back-pushing action of the crops. a. 90° with inward lead of 2° c. 92° with inward lead of 2° d. None of above

Description : The cutter bar is set at about to the direction of motion in order to overcome the back-pushing action of the crops. a. 90° with inward lead of 2° c. 92° with inward lead of 2° d. None of above

Last Answer : Ans-         b. 88° with inward lead of 2°  

It is always provided on each end of the cutter bar to regulate the height of cut and to provide easy and smooth sliding of the cutter bar on the land. b. Plate c. pitman d. None of above

Description : It is always provided on each end of the cutter bar to regulate the height of cut and to provide easy and smooth sliding of the cutter bar on the land. b. Plate c. pitman d. None of above

Last Answer : Ans-    b. shoe

Cutter Bar made of a) Copper b) High Grade Steel c) Cast iron d) None of the above

Description : Cutter Bar made of a) Copper b) High Grade Steel c) Cast iron d) None of the above

Last Answer : High Grade Steel

is part of the Cutter bar is shaped in Triangular shape with two cutting edges a) Knife head b) Knife back c) Grass board

Description : is part of the Cutter bar is shaped in Triangular shape with two cutting edges a) Knife head b) Knife back c) Grass board d) Knife Section

Last Answer :   <!-- [endif] -->Knife Section

Play in bearings and worn knife head holders caused due to in cutter bar. A) Pitman B) Breaking of knives. C) Knife head. D) Grass board.

Description : Play in bearings and worn knife head holders caused due to in cutter bar. A) Pitman B) Breaking of knives. C) Knife head. D) Grass board.

Last Answer : Breaking of knives.

Cutter bar is made up of which material a) High grade steel. b) Low carbon alloy steel. c) Platinum. d) High speed tool steel

Description : Cutter bar is made up of which material a) High grade steel. b) Low carbon alloy steel. c) Platinum. d) High speed tool steel

Last Answer : High grade steel

is the length of cutter bar which is recommended as per the standard of design of it. a) 4cm b) 6cm c) 2cm d) 3cm

Description : is the length of cutter bar which is recommended as per the standard of design of it. a) 4cm b) 6cm c) 2cm d) 3cm

Last Answer : 2cm

At what degree does the cutter bar is set for achieving the object ? a) 96 b) 88 c) 69 and half. d) 105

Description : At what degree does the cutter bar is set for achieving the object ? a) 96 b) 88 c) 69 and half. d) 105

Last Answer : 88

is an assembly comparing of fingers, knife guides on wearing plates and shoe. a) Cutter bar b) Knife section c) Pitman d) Shoe

Description : is an assembly comparing of fingers, knife guides on wearing plates and shoe. a) Cutter bar b) Knife section c) Pitman d) Shoe

Last Answer : Cutter bar

A reaper is used for: (a) cutting crop (b) cutting and windrowing (c) cutting and threshing (d) Cutting grass

Description : A reaper is used for: (a) cutting crop (b) cutting and windrowing (c) cutting and threshing (d) Cutting grass

Last Answer : (a) cutting crop

A reaper used for : a. Cutting crop b. Cutting and windrewing c. Cutting and threshing d. None of these

Description : A reaper used for : a. Cutting crop b. Cutting and windrewing c. Cutting and threshing d. None of these

Last Answer : b. Cutting and windrewing

It is a machine to cut herbage crops and leave them in a swath. b. thrasher c. Reaper. d. None of above

Description : It is a machine to cut herbage crops and leave them in a swath. b. thrasher c. Reaper. d. None of above

Last Answer : Ans-                                                                             a. Mower

The reaper in a tractor can be raised or lowered by a) Mechanically b) Pneumatic system c) Hydraulic system d) Electric system

Description : The reaper in a tractor can be raised or lowered by a) Mechanically b) Pneumatic system c) Hydraulic system d) Electric system

Last Answer : Hydraulic system

Cultivator has tines or disc to work between crop row. a. Fixed c. Helical d. None of the above.

Description : Cultivator has tines or disc to work between crop row. a. Fixed c. Helical d. None of the above.

Last Answer : Ans - b. adjustable

Power tiller is a… tractor. b. row crop type c. crawler d. None of the above

Description : Power tiller is a… tractor. b. row crop type c. crawler d. None of the above

Last Answer : Ans - a. walking type

tractor is a vehicle that runs on continuous tracks instead of wheels. In agriculture they are used for land clearing and land leveling works. a. Row crop b. Walking d. None of the above

Description : tractor is a vehicle that runs on continuous tracks instead of wheels. In agriculture they are used for land clearing and land leveling works. a. Row crop b. Walking d. None of the above

Last Answer : <!-- [if !supportLists] -->a.                <!-- [endif] -->Ans- c. crawler

Crawler tractor is also called as..... a) Hand tractor c) Walking type tractor b) Track type tractor d) Row crop tractor

Description : Crawler tractor is also called as..... a) Hand tractor c) Walking type tractor b) Track type tractor d) Row crop tractor

Last Answer : Track type tractor

Following is the type of tractor a) General purpose tractor c) Row crop tractor b) Simple operation tractor d) both a and b

Description : Following is the type of tractor a) General purpose tractor c) Row crop tractor b) Simple operation tractor d) both a and b

Last Answer : both a and b

Row crop tractor used for..... a) Crop c) Major farm operations b) Definite jobs d) None of the above

Description : Row crop tractor used for..... a) Crop c) Major farm operations b) Definite jobs d) None of the above

Last Answer : Crop 

tractor us used for major operation such as ploughing, harrowing, sowing, harvesting and transporting work. A. Row crop Tractor C. Special purpose tractor B. Crawler tractor D. General purpose tractor

Description : tractor us used for major operation such as ploughing, harrowing, sowing, harvesting and transporting work. A. Row crop Tractor C. Special purpose tractor B. Crawler tractor D. General purpose tractor

Last Answer : General purpose tractor

A general-purpose or row-crop tractor is machines A. Single use C. Both A & B B. Universal D. None of Above

Description : A general-purpose or row-crop tractor is machines A. Single use C. Both A & B B. Universal D. None of Above

Last Answer : Universal

While increasing the forward speed of the combine harvester speed of reel should be a) Increased in same ratio b) Decreased in same ratio c) No changes d) Doubled Ans. a

Description : While increasing the forward speed of the combine harvester speed of reel should be a) Increased in same ratio b) Decreased in same ratio c) No changes d) Doubled Ans. a

Last Answer : ans a

Vertical transportation of materials can be done by a/an (A) Apron conveyor (B) Pneumatic conveyor (C) Bucket elevator (D) Both (B) & (C)

Description : Vertical transportation of materials can be done by a/an (A) Apron conveyor (B) Pneumatic conveyor (C) Bucket elevator (D) Both (B) & (C)

Last Answer : (D) Both (B) & (C)

Star wheel diameter is in dry land weeder. a. 100 mm b. 110mm d. None of the above.

Description : Star wheel diameter is in dry land weeder. a. 100 mm b. 110mm d. None of the above.

Last Answer : Ans - c. 120mm

Peg or star wheel type weeder is suitable for weeding in lands. a. Wet c. Soft d. None of the above.

Description : Peg or star wheel type weeder is suitable for weeding in lands. a. Wet c. Soft d. None of the above.

Last Answer : Ans - b. dry

has a long handled tool and a 120 mm diameter star wheel a) Engine operated weeder b) Cono weeder for paddy c) Dry land weeder d) Sweep

Description : has a long handled tool and a 120 mm diameter star wheel a) Engine operated weeder b) Cono weeder for paddy c) Dry land weeder d) Sweep

Last Answer : Dry land weeder

(i) When are kharif crops (1) sown and (2) harvested ? (ii) Name a cash crop which is also a kharif crop. -Geography

Description : (i) When are kharif crops (1) sown and (2) harvested ? (ii) Name a cash crop which is also a kharif crop. -Geography

Last Answer : (i) Kharif crops are sown after monsoons in June, July and harvested in Oct. and Nov. (ii) A cash crop which is also a Kharif crop — cotton.

Which crop is grown with the onset of monsoons and are harvested in the month of September and October? -SST 10th

Description : Which crop is grown with the onset of monsoons and are harvested in the month of September and October? -SST 10th

Last Answer : The crop which is grown with the onset of monsoons and are harvested in the month of September and October is Kharif.

Which crop are grain with the on set of mansoon & are harvested in September-October? -Do You Know?

Description : Which crop are grain with the on set of mansoon & are harvested in September-October? -Do You Know?

Last Answer : answer:

When is the kharif crop harvested? -General Knowledge

Description : When is the kharif crop harvested? -General Knowledge

Last Answer : In India, the season is popularly considered to start in June and end in October. Kharif crops are usually sown at the beginning of the first rains during the advent of the south-west monsoon season, and they are harvested at the end of monsoon season (October-November).

When is the kharif crop harvested? -General Knowledge

Description : When is the kharif crop harvested? -General Knowledge

Last Answer : The kharif cropping season is from July –October during the south-west monsoon and the Rabi cropping season is from October-March (winter). The crops grown between March and June are summer crops

When is the kharif crop harvested? -General Knowledge

Description : When is the kharif crop harvested? -General Knowledge

Last Answer : Crops that are sown during the southwest monsoon season are called kharif or monsoon crops. These crops are sown at the beginning of the season around end May to early June and are harvested post the ... . Rice, maize, pulses such as urad, moong dal and millets are among the key kharif crops.

When is the kharif crop harvested? -General Knowledge

Description : When is the kharif crop harvested? -General Knowledge

Last Answer : answer:

Which crop are grain with the on set of mansoon & are harvested in September- October?

Description : Which crop are grain with the on set of mansoon & are harvested in September- October?

Last Answer : Kharif

Which element is depleted most from the soil after a crop is harvested?

Description : Which element is depleted most from the  soil after a crop is harvested?

Last Answer : Potassium

Which element is depleted most from the soil after a crop is harvested?

Description : Which element is depleted most from the soil after a crop is harvested?

Last Answer : Potassium