How Cavitation Can Be Eliminated In A Pump?

How Cavitation Can Be Eliminated In A Pump?
by

1 Answer

Answer :

Cavitation means bubbles are forming in the liquid.
 To avoid Cavitation, we have to increase the Pump size to One or Two Inch;
 To increase the pressure of the Suction Head, or
 Decrease the Pump Speed.
by

Related questions

In centrifugal pump operation, the cavitation can be eliminated by maintaining suction pressure __________ the vapor pressure of the liquid at the suction temperature. (A) Lower than (B) Higher than (C) Equal to (D) None of these

Description : In centrifugal pump operation, the cavitation can be eliminated by maintaining suction pressure __________ the vapor pressure of the liquid at the suction temperature. (A) Lower than (B) Higher than (C) Equal to (D) None of these

Last Answer : (B) Higher than

Circulation pump is located below the evaporator to (A) Avoid cavitation (B) Avoid frequent priming (C) Create more suction head (D) None of these

Description : Circulation pump is located below the evaporator to (A) Avoid cavitation (B) Avoid frequent priming (C) Create more suction head (D) None of these

Last Answer : (C) Create more suction head

Air vessel provided in a reciprocating pump (A) Smoothens the flow by avoiding pulsations (B) Increases the volumetric efficiency of the pump (C) Saves the pump from the danger of cavitation (D) None of these

Description : Air vessel provided in a reciprocating pump (A) Smoothens the flow by avoiding pulsations (B) Increases the volumetric efficiency of the pump (C) Saves the pump from the danger of cavitation (D) None of these

Last Answer : (D) None of these

. A special type of liquid transporting device is the diffuser pump, in which __________ are minimised. (A) Bearing losses (B) Disk friction (C) Shock losses (D) Cavitation

Description : . A special type of liquid transporting device is the diffuser pump, in which __________ are minimised. (A) Bearing losses (B) Disk friction (C) Shock losses (D) Cavitation

Last Answer : (C) Shock losses

What causes cavitation in centrifugal pump? (A) High suction pressure (B) Low barometric pressure(C) Low suction pressure(D) High suction velocity

Description : What causes cavitation in centrifugal pump? (A) High suction pressure (B) Low barometric pressure (C) Low suction pressure (D) High suction velocity

Last Answer : (C) Low suction pressure

Cavitation in a pump creates so many undesirable effects. Out of the following, which is not an undesirable effect created by cavitation? (A) Decrease in effect(B) Increase in thrust(C) Develops noise(D) Develops high pressure

Description : Cavitation in a pump creates so many undesirable effects. Out of the following, which is not an undesirable effect created by cavitation? (A) Decrease in effect (B) Increase in thrust (C) Develops noise (D) Develops high pressure

Last Answer : (D) Develops high pressure

Cavitation can be prevented by (A) Suitably designing the pump (B) Maintaining the suction head sufficiently greater than the vapour pressure (C) Maintaining suction head = developed head (D) Maintaining suction head lower than the vapour pressure

Description : Cavitation can be prevented by (A) Suitably designing the pump (B) Maintaining the suction head sufficiently greater than the vapour pressure (C) Maintaining suction head = developed head (D) Maintaining suction head lower than the vapour pressure

Last Answer : (B) Maintaining the suction head sufficiently greater than the vapour pressure

Cavitation in a centrifugal pump can be avoided by keeping the (A) Inlet pressure high (B) Outlet pressure low (C) Inlet pressure low (D) Outlet pressure high

Description : Cavitation in a centrifugal pump can be avoided by keeping the (A) Inlet pressure high (B) Outlet pressure low (C) Inlet pressure low (D) Outlet pressure high

Last Answer : (A) Inlet pressure high

Cavitation occurs in a centrifugal pump when the suction pressure is (A) Less than the vapour pressure of the liquid at that temperature (B) Greater than the vapour pressure of the liquid at that temperature (C) Equal to the vapour pressure (D) Equal to the developed head

Description : Cavitation occurs in a centrifugal pump when the suction pressure is (A) Less than the vapour pressure of the liquid at that temperature (B) Greater than the vapour pressure of the liquid at that temperature (C) Equal to the vapour pressure (D) Equal to the developed head

Last Answer : (A) Less than the vapour pressure of the liquid at that temperature

Erosion and pits formation on the impeller of a centrifugal pump may be due to (A) Cavitation (B) Low speed of impeller (C) Its operation with delivery valve closed for considerable time after starting the pump (D) Off centering of pump with motor

Description : Erosion and pits formation on the impeller of a centrifugal pump may be due to (A) Cavitation (B) Low speed of impeller (C) Its operation with delivery valve closed for considerable time after starting the pump (D) Off centering of pump with motor

Last Answer : (A) Cavitation

Function of air vessel provided in a reciprocating pump is to (A) Reduce discharge fluctuation (B) Reduce the danger of cavitation (C) Avoid the necessity of priming (D) Increase the pump efficiency

Description : Function of air vessel provided in a reciprocating pump is to (A) Reduce discharge fluctuation (B) Reduce the danger of cavitation (C) Avoid the necessity of priming (D) Increase the pump efficiency

Last Answer : (A) Reduce discharge fluctuation

Air vessel fitted to a reciprocating pump (A) Increases the work done (B) Decreases the work done (C) Causes cavitation (D) Results in non-uniform discharge

Description : Air vessel fitted to a reciprocating pump (A) Increases the work done (B) Decreases the work done (C) Causes cavitation (D) Results in non-uniform discharge

Last Answer : (B) Decreases the work done

Good design of the casing of a centrifugal pump aims at minimising the (A) Cavitation (B) Frictional losses (C) Kinetic energy loss (D) Static head

Description : Good design of the casing of a centrifugal pump aims at minimising the (A) Cavitation (B) Frictional losses (C) Kinetic energy loss (D) Static head

Last Answer : Option C

What Is Cavitation?

Description : What Is Cavitation?

Last Answer : Cavitation is the formation of vapor cavities (Air bubbles) in a liquid.

Why Cavitation Will Occur In Centrifugal Pumps And Not In Displacement Pumps?

Description : Why Cavitation Will Occur In Centrifugal Pumps And Not In Displacement Pumps?

Last Answer : The formation of cavities (or bubbles) is induced by flow separation, or non-uniform flow velocities, inside a pump casing. In centrifugal pumps the eye of the pump impeller is smaller than ... to increase in temperature in impeller. This air bubbles are transmitted to pump which forms cavitation.

Who can teach me how to find the Volume number and Issue number of “Numerical simulation of three dimensional cavitation shedding dynamics with special emphasis on cavitation–vortex interaction”?

Description : Who can teach me how to find the Volume number and Issue number of “Numerical simulation of three dimensional cavitation shedding dynamics with special emphasis on cavitation–vortex interaction”?

Last Answer : Google it. \ http://www.sciencedirect.com/science/article/pii/S0029801814001838

What you mean by cavitation and NPSH?

Description : What you mean by cavitation and NPSH?

Last Answer : Cavitation: Bubbles form in the liquids whenever there is pressure reduction inside the pump. These bubbles collapse when they approach high-pressure areas damaging pump internals. This is called the cavitation. ... . It is the head available at the eye of the impeller corrected to vapour pressure. 

Pick out the wrong statement about cavitation. (A) Sudden reduction of pressure in a fluid flow system caused by flow separation, vortex formation or abrupt closing of valve leads to cavitation (B) Cavitation may be caused due to boiling of liquid by decreasing the pressure resulting in formation & collapse of vapor cavities (C) Cavitation begins at higher static pressure and lower velocity in larger diameter pipelines resulting in audible noise(D) Large scale cavitation cannot damage pipeline, restrict fluid flow anddamage steam turbine blades

Description : Pick out the wrong statement about cavitation. (A) Sudden reduction of pressure in a fluid flow system caused by flow separation, vortex formation or abrupt closing of valve leads to cavitation ... (D) Large scale cavitation cannot damage pipeline, restrict fluid flow and damage steam turbine blades

Last Answer : (D) Large scale cavitation cannot damage pipeline, restrict fluid flow and damage steam turbine blades

The phenomenon occuring during pumping of a liquid solution containing dissolved gases, which may come out of the solution giving rise to gas pockets, is termed as (A) Evaporation (B) Cavitation (C) Sublimation (D) Stripping

Description : The phenomenon occuring during pumping of a liquid solution containing dissolved gases, which may come out of the solution giving rise to gas pockets, is termed as (A) Evaporation (B) Cavitation (C) Sublimation (D) Stripping

Last Answer : (B) Cavitation

In fluid flow, cavitation is caused, if the (A) Fluid velocity decreases to zero (B) Total energy decreases (C) Both (A) and (B) (D) Flow pressure approaches its vapor pressure at the prevailing temperature

Description : In fluid flow, cavitation is caused, if the (A) Fluid velocity decreases to zero (B) Total energy decreases (C) Both (A) and (B) (D) Flow pressure approaches its vapor pressure at the prevailing temperature

Last Answer : (D) Flow pressure approaches its vapor pressure at the prevailing temperature

The excess of the sum of pressure & velocity heads over the vaporpressure of the liquid at the suction is called the(A) Static submergence(B) Net positive suction head (NPSH)(C) Cavitation sensitivity(D) Priming

Description : The excess of the sum of pressure & velocity heads over the vaporpressure of the liquid at the suction is called the (A) Static submergence (B) Net positive suction head (NPSH) (C) Cavitation sensitivity (D) Priming

Last Answer : (B) Net positive suction head (NPSH)

In centrifugal pumps, cavitation occurs, when pressure of the impeller eye or vane becomes (A) Less than atmospheric pressure (B) More than liquid vapor pressure (C) Less than liquid vapor pressure (D) More than atmospheric pressure

Description : In centrifugal pumps, cavitation occurs, when pressure of the impeller eye or vane becomes (A) Less than atmospheric pressure (B) More than liquid vapor pressure (C) Less than liquid vapor pressure (D) More than atmospheric pressure

Last Answer : (C) Less than liquid vapor pressure

The major reason of hydrodynamic noise (i.e., noise resulting from liquid flow) is (A) Pipe vibrations (B) Cavitation (C) Boundary layer separation (D) Fluctuation in liquid flow

Description : The major reason of hydrodynamic noise (i.e., noise resulting from liquid flow) is (A) Pipe vibrations (B) Cavitation (C) Boundary layer separation (D) Fluctuation in liquid flow

Last Answer : (B) Cavitation

Probability of cavitation occuring becomes very high, when the local __________ resulting in water bubbles formation, which on rupture cause cavitation (A) Pressure falls below the vapour pressure (B) Pressure becomes very high (C) Temperature becomes low (D) All 'a', 'b' & 'c'

Description : Probability of cavitation occuring becomes very high, when the local __________ resulting in water bubbles formation, which on rupture cause cavitation (A) Pressure falls below the vapour pressure (B) Pressure becomes very high (C) Temperature becomes low (D) All 'a', 'b' & 'c'

Last Answer : (D) All 'a', 'b' & 'c'

Cavitation is caused by (A) High velocity (B) High pressure (C) Weak material (D) Low pressure

Description : Cavitation is caused by (A) High velocity (B) High pressure (C) Weak material (D) Low pressure

Last Answer : Answer: Option D

Cavitation will begin when (A) The pressure at any location reaches an absolute pressure equal to the saturated vapour pressure of the liquid (B) Pressure becomes more than critical pressure (C) Flow is increased (D) Pressure is increased

Description : Cavitation will begin when (A) The pressure at any location reaches an absolute pressure equal to the saturated vapour pressure of the liquid (B) Pressure becomes more than critical pressure (C) Flow is increased (D) Pressure is increased

Last Answer : Answer: Option A

Which one of the following statements is correct ? (a) Dynamic viscosity is the property of a fluid which is not in motion (b) Surface energy is a fluid property giving rise to the phenomenon of capillarity in water (c) Cavitation results from the action of very high pressure (d) Real fluids have lower viscosity than ideal fluids

Description : Which one of the following statements is correct ? (a) Dynamic viscosity is the property of a fluid which is not in motion (b) Surface energy is a fluid property giving rise to the phenomenon ... results from the action of very high pressure (d) Real fluids have lower viscosity than ideal fluids

Last Answer : (d) Real fluids have lower viscosity than ideal fluids

Assume that water vaporizes at an absolute pressure of 1.5 m, barometric pressure head is 9.5 m and cavitation coefficient is 0.1 A turbine operates under a head of 40 m. the safe height of the runner above the tail water level, in meters, is : a) 6 b) 4 c) 3 d) 2

Description : Assume that water vaporizes at an absolute pressure of 1.5 m, barometric pressure head is 9.5 m and cavitation coefficient is 0.1 A turbine operates under a head of 40 m. the safe height of the runner above the tail water level, in meters, is : a) 6 b) 4 c) 3 d) 2

Last Answer : b) 4

The formation of pockets of gas in a liquid is called: w) absorption x) cavitation y) adsorption z) dissolving

Description : The formation of pockets of gas in a liquid is called: w) absorption x) cavitation y) adsorption z) dissolving

Last Answer : ANSWER: X -- CAVITATION

If you want to stop the car in the shortest distance on an icy road, you should a.107 dynes b.not apply the brakes c.pump' the brakes d.push hard the brakes to lock the wheels e.push just hard enough to prevent slipping

Description : If you want to stop the car in the shortest distance on an icy road, you should a.107 dynes b.not apply the brakes c.pump' the brakes d.push hard the brakes to lock the wheels e.push just hard enough to prevent slipping

Last Answer : e. push just hard enough to prevent slipping

Minimum horsepower of pump required for filling 50m3 water tank, 20 metres high from ground in 30 minutes by lifting water from a well 5 metres below the ground level is a.5.45 KW b.7.5 KW c.6.81 KW d.Tapered bearing e.66.8 KW

Description : Minimum horsepower of pump required for filling 50m3 water tank, 20 metres high from ground in 30 minutes by lifting water from a well 5 metres below the ground level is a.5.45 KW b.7.5 KW c.6.81 KW d.Tapered bearing e.66.8 KW

Last Answer : c. 6.81 KW

Out of electric heater and heat pump, which is economical in operation ?

Description : Out of electric heater and heat pump, which is economical in operation ?

Last Answer : Heat pump.

What is the difference between heat engine & heat pump?

Description : What is the difference between heat engine & heat pump?

Last Answer : Heat Engine produces work and transfers energy from high temp. to low temp source medium. In Heat pump external work is needed to transfer energy from low to high temp. medium.

Why Does The Safety Valve On My Compressor Pump Make A "popping" Sound?

Description : Why Does The Safety Valve On My Compressor Pump Make A "popping" Sound?

Last Answer : This is most commonly an indication of bad valves. Depending on the model valves could be rebuilt or replaced.

What Is Positive Displacement Pump?

Description : What Is Positive Displacement Pump?

Last Answer : Positive displacement pumps are those that operate by forcing a fixed volume of fluid from the inlet pressure section of the pump into the discharge zone of the pump.

Why The Centrifugal Pump Is Called High Discharge Pump?

Description : Why The Centrifugal Pump Is Called High Discharge Pump?

Last Answer : Centrifugal pump is a kinetic device. The centrifugal pump uses the centrifugal force to push out the fluid. So the liquid entering the pump receives kinetic energy from the rotating impeller. The centrifugal ... following formulae: Centrifugal force F= (M*V2)/R. Where, M-Mass V-Velocity R-Radius

Why Centrifugal Pump Is Not Called As A Positive Displacement Type Of Pump?

Description : Why Centrifugal Pump Is Not Called As A Positive Displacement Type Of Pump?

Last Answer : The centrifugal has varying flow depending on pressure or head, whereas the Positive Displacement pump has more or less constant flow regardless of pressure. Likewise viscosity is constant for ... pump has more or less constant efficiency, where centrifugal pump has varying efficiency rate.

Which Pump Is More Efficient Centrifugal Pump Or Reciprocating Pump?

Description : Which Pump Is More Efficient Centrifugal Pump Or Reciprocating Pump?

Last Answer : Centrifugal pump. Because flow rate is higher compared to reciprocating pump. Flow is smooth and it requires less space to install. Lower initial cost and lower maintenance cost.

is an important machine used for farm machinisation. a) Tractor c) truck. b) Pump. d) Motor

Description : is an important machine used for farm machinisation. a) Tractor c) truck. b) Pump. d) Motor

Last Answer : Tractor 

The pump is mostly made of: e) Aluminium c) Brass f) Copper d) Plastic

Description : The pump is mostly made of: e) Aluminium c) Brass f) Copper d) Plastic

Last Answer :  Aluminium

Bucket type sprayer consist of: i) Single and double acting pump c) Plunger type pump j) Centrifugal pump d) All are correct

Description : Bucket type sprayer consist of: i) Single and double acting pump c) Plunger type pump j) Centrifugal pump d) All are correct

Last Answer : Single and double acting pump

In power-operated sprayer, the pump works at a pressure of: A. 2-5 Kg/cm2 B. 3-8.5 Kg/cm2 C. 4-12 Kg/cm2. D. 5-15 Kg/cm2

Description : In power-operated sprayer, the pump works at a pressure of: A. 2-5 Kg/cm2 B. 3-8.5 Kg/cm2 C. 4-12 Kg/cm2. D. 5-15 Kg/cm2

Last Answer : 3-8.5 Kg/cm2

The pump used in airplane sprayers: A. Dentrifugal and gear pump B. Gear and Diaphragm pump C. Diaphragm and centrifugal pump D. Plunger and centrifugal pump

Description : The pump used in airplane sprayers: A. Dentrifugal and gear pump B. Gear and Diaphragm pump C. Diaphragm and centrifugal pump D. Plunger and centrifugal pump

Last Answer : Dentrifugal and gear pump

he pump is used in power-operated sprayer is: A. Plunger type B. Diaphragm type C. Gear type D. Piston type

Description : The pump is used in power-operated sprayer is: A. Plunger type B. Diaphragm type C. Gear type D. Piston type

Last Answer : Gear type

The pump is mostly made of: A. Aluminium B. Copper C. Brass D. Plastic

Description : The pump is mostly made of: A. Aluminium B. Copper C. Brass D. Plastic

Last Answer : Aluminium 

Bucket type sprayer consist of: A. Single and double acting pump B. Centrifugal pump C. Plunger type pump D. All are correct

Description : Bucket type sprayer consist of: A. Single and double acting pump B. Centrifugal pump C. Plunger type pump D. All are correct

Last Answer : Single and double acting pump

is not the component of sprayers. a) Swirl plate b) Filter c) Cut-off value d) Pump

Description : is not the component of sprayers. a) Swirl plate b) Filter c) Cut-off value d) Pump

Last Answer : Pump

Recovery of waste heat from hot fluid to fluid is called: a) thermo compressor b) waste heat recovery boiler c) heat Pump d) economizer

Description : Recovery of waste heat from hot fluid to fluid is called: a) thermo compressor b) waste heat recovery boiler c) heat Pump d) economizer

Last Answer : heat Pump

Capillary wick is a part of a) heat pump b) heat wheel c) heat pipe d) regenerator

Description : Capillary wick is a part of a) heat pump b) heat wheel c) heat pipe d) regenerator

Last Answer : heat pipe

Recovery of heat from dryer exhaust air is a typical application of: a) Waste heat recovery boiler b) Heat pump c) Heat wheel d) Economizer

Description : Recovery of heat from dryer exhaust air is a typical application of: a) Waste heat recovery boiler b) Heat pump c) Heat wheel d) Economizer

Last Answer : Heat wheel