Cavitation is caused by (A) High velocity (B) High pressure (C) Weak material (D) Low pressure

Cavitation is caused by
(A) High velocity
(B) High pressure
(C) Weak material
(D) Low pressure
by

1 Answer

Answer :

Answer: Option D
by

Related questions

What causes cavitation in centrifugal pump? (A) High suction pressure (B) Low barometric pressure(C) Low suction pressure(D) High suction velocity

Description : What causes cavitation in centrifugal pump? (A) High suction pressure (B) Low barometric pressure (C) Low suction pressure (D) High suction velocity

Last Answer : (C) Low suction pressure

Pick out the wrong statement about cavitation. (A) Sudden reduction of pressure in a fluid flow system caused by flow separation, vortex formation or abrupt closing of valve leads to cavitation (B) Cavitation may be caused due to boiling of liquid by decreasing the pressure resulting in formation & collapse of vapor cavities (C) Cavitation begins at higher static pressure and lower velocity in larger diameter pipelines resulting in audible noise(D) Large scale cavitation cannot damage pipeline, restrict fluid flow anddamage steam turbine blades

Description : Pick out the wrong statement about cavitation. (A) Sudden reduction of pressure in a fluid flow system caused by flow separation, vortex formation or abrupt closing of valve leads to cavitation ... (D) Large scale cavitation cannot damage pipeline, restrict fluid flow and damage steam turbine blades

Last Answer : (D) Large scale cavitation cannot damage pipeline, restrict fluid flow and damage steam turbine blades

In fluid flow, cavitation is caused, if the (A) Fluid velocity decreases to zero (B) Total energy decreases (C) Both (A) and (B) (D) Flow pressure approaches its vapor pressure at the prevailing temperature

Description : In fluid flow, cavitation is caused, if the (A) Fluid velocity decreases to zero (B) Total energy decreases (C) Both (A) and (B) (D) Flow pressure approaches its vapor pressure at the prevailing temperature

Last Answer : (D) Flow pressure approaches its vapor pressure at the prevailing temperature

The excess of the sum of pressure & velocity heads over the vaporpressure of the liquid at the suction is called the(A) Static submergence(B) Net positive suction head (NPSH)(C) Cavitation sensitivity(D) Priming

Description : The excess of the sum of pressure & velocity heads over the vaporpressure of the liquid at the suction is called the (A) Static submergence (B) Net positive suction head (NPSH) (C) Cavitation sensitivity (D) Priming

Last Answer : (B) Net positive suction head (NPSH)

Which one of the following statements is correct ? (a) Dynamic viscosity is the property of a fluid which is not in motion (b) Surface energy is a fluid property giving rise to the phenomenon of capillarity in water (c) Cavitation results from the action of very high pressure (d) Real fluids have lower viscosity than ideal fluids

Description : Which one of the following statements is correct ? (a) Dynamic viscosity is the property of a fluid which is not in motion (b) Surface energy is a fluid property giving rise to the phenomenon ... results from the action of very high pressure (d) Real fluids have lower viscosity than ideal fluids

Last Answer : (d) Real fluids have lower viscosity than ideal fluids

Cavitation in a centrifugal pump can be avoided by keeping the (A) Inlet pressure high (B) Outlet pressure low (C) Inlet pressure low (D) Outlet pressure high

Description : Cavitation in a centrifugal pump can be avoided by keeping the (A) Inlet pressure high (B) Outlet pressure low (C) Inlet pressure low (D) Outlet pressure high

Last Answer : (A) Inlet pressure high

Probability of cavitation occuring becomes very high, when the local __________ resulting in water bubbles formation, which on rupture cause cavitation (A) Pressure falls below the vapour pressure (B) Pressure becomes very high (C) Temperature becomes low (D) All 'a', 'b' & 'c'

Description : Probability of cavitation occuring becomes very high, when the local __________ resulting in water bubbles formation, which on rupture cause cavitation (A) Pressure falls below the vapour pressure (B) Pressure becomes very high (C) Temperature becomes low (D) All 'a', 'b' & 'c'

Last Answer : (D) All 'a', 'b' & 'c'

Cavitation will begin when (A) The pressure at any location reaches an absolute pressure equal to the saturated vapour pressure of the liquid (B) Pressure becomes more than critical pressure (C) Flow is increased (D) Pressure is increased

Description : Cavitation will begin when (A) The pressure at any location reaches an absolute pressure equal to the saturated vapour pressure of the liquid (B) Pressure becomes more than critical pressure (C) Flow is increased (D) Pressure is increased

Last Answer : Answer: Option A

Assume that water vaporizes at an absolute pressure of 1.5 m, barometric pressure head is 9.5 m and cavitation coefficient is 0.1 A turbine operates under a head of 40 m. the safe height of the runner above the tail water level, in meters, is : a) 6 b) 4 c) 3 d) 2

Description : Assume that water vaporizes at an absolute pressure of 1.5 m, barometric pressure head is 9.5 m and cavitation coefficient is 0.1 A turbine operates under a head of 40 m. the safe height of the runner above the tail water level, in meters, is : a) 6 b) 4 c) 3 d) 2

Last Answer : b) 4

Cavitation in a pump creates so many undesirable effects. Out of the following, which is not an undesirable effect created by cavitation? (A) Decrease in effect(B) Increase in thrust(C) Develops noise(D) Develops high pressure

Description : Cavitation in a pump creates so many undesirable effects. Out of the following, which is not an undesirable effect created by cavitation? (A) Decrease in effect (B) Increase in thrust (C) Develops noise (D) Develops high pressure

Last Answer : (D) Develops high pressure

Erosion and pits formation on the impeller of a centrifugal pump may be due to (A) Cavitation (B) Low speed of impeller (C) Its operation with delivery valve closed for considerable time after starting the pump (D) Off centering of pump with motor

Description : Erosion and pits formation on the impeller of a centrifugal pump may be due to (A) Cavitation (B) Low speed of impeller (C) Its operation with delivery valve closed for considerable time after starting the pump (D) Off centering of pump with motor

Last Answer : (A) Cavitation

Cavitation can be prevented by (A) Suitably designing the pump (B) Maintaining the suction head sufficiently greater than the vapour pressure (C) Maintaining suction head = developed head (D) Maintaining suction head lower than the vapour pressure

Description : Cavitation can be prevented by (A) Suitably designing the pump (B) Maintaining the suction head sufficiently greater than the vapour pressure (C) Maintaining suction head = developed head (D) Maintaining suction head lower than the vapour pressure

Last Answer : (B) Maintaining the suction head sufficiently greater than the vapour pressure

In centrifugal pump operation, the cavitation can be eliminated by maintaining suction pressure __________ the vapor pressure of the liquid at the suction temperature. (A) Lower than (B) Higher than (C) Equal to (D) None of these

Description : In centrifugal pump operation, the cavitation can be eliminated by maintaining suction pressure __________ the vapor pressure of the liquid at the suction temperature. (A) Lower than (B) Higher than (C) Equal to (D) None of these

Last Answer : (B) Higher than

Cavitation occurs in a centrifugal pump when the suction pressure is (A) Less than the vapour pressure of the liquid at that temperature (B) Greater than the vapour pressure of the liquid at that temperature (C) Equal to the vapour pressure (D) Equal to the developed head

Description : Cavitation occurs in a centrifugal pump when the suction pressure is (A) Less than the vapour pressure of the liquid at that temperature (B) Greater than the vapour pressure of the liquid at that temperature (C) Equal to the vapour pressure (D) Equal to the developed head

Last Answer : (A) Less than the vapour pressure of the liquid at that temperature

In centrifugal pumps, cavitation occurs, when pressure of the impeller eye or vane becomes (A) Less than atmospheric pressure (B) More than liquid vapor pressure (C) Less than liquid vapor pressure (D) More than atmospheric pressure

Description : In centrifugal pumps, cavitation occurs, when pressure of the impeller eye or vane becomes (A) Less than atmospheric pressure (B) More than liquid vapor pressure (C) Less than liquid vapor pressure (D) More than atmospheric pressure

Last Answer : (C) Less than liquid vapor pressure

A no bhzzle placed at the end of a water pipe line discharges water at a (A) Low pressure (B) High pressure (C) Low velocity(D) High velocity

Description : A nozzle placed at the end of a water pipe line discharges water at a (A) Low pressure (B) High pressure (C) Low velocity (D) High velocity

Last Answer : Answer: Option D

Flow of air from one place to the other is caused due to (A) The sum of elevation (B) Pressure head (C) Velocity head (D) All of the above

Description : Flow of air from one place to the other is caused due to (A) The sum of elevation (B) Pressure head (C) Velocity head (D) All of the above

Last Answer : (D) All of the above

The nurse recognizes which of the following signs as typical of the patient in shock? a) Rapid, weak, thready pulse Pulse increases as the body tries to compensate. b) Flushed face Pallor is an indicator of shock. c) Warm, dry skin Skin is generally cool and moist in shock. d) Increased urine output Usually, a low blood pressure and concentrated urine are observed in the patient in shock.

Description : The nurse recognizes which of the following signs as typical of the patient in shock? a) Rapid, weak, thready pulse Pulse increases as the body tries to compensate. b) Flushed face Pallor is ... urine output Usually, a low blood pressure and concentrated urine are observed in the patient in shock.

Last Answer : a) Rapid, weak, thready pulse Pulse increases as the body tries to compensate.

It is the unbalanced force developed in a turbo jet engine that is caused by the difference in the momentum of the low-velocity air entering the engine and the high velocity exhaust gases leaving the engine.  a. Fall  b. Lift  c. Drag  d. Thrust

Description : It is the unbalanced force developed in a turbo jet engine that is caused by the difference in the momentum of the low-velocity air entering the engine and the high velocity exhaust gases leaving the engine.  a. Fall  b. Lift  c. Drag  d. Thrust

Last Answer : Thrust

Who can teach me how to find the Volume number and Issue number of “Numerical simulation of three dimensional cavitation shedding dynamics with special emphasis on cavitation–vortex interaction”?

Description : Who can teach me how to find the Volume number and Issue number of “Numerical simulation of three dimensional cavitation shedding dynamics with special emphasis on cavitation–vortex interaction”?

Last Answer : Google it. \ http://www.sciencedirect.com/science/article/pii/S0029801814001838

Circulation pump is located below the evaporator to (A) Avoid cavitation (B) Avoid frequent priming (C) Create more suction head (D) None of these

Description : Circulation pump is located below the evaporator to (A) Avoid cavitation (B) Avoid frequent priming (C) Create more suction head (D) None of these

Last Answer : (C) Create more suction head

What you mean by cavitation and NPSH?

Description : What you mean by cavitation and NPSH?

Last Answer : Cavitation: Bubbles form in the liquids whenever there is pressure reduction inside the pump. These bubbles collapse when they approach high-pressure areas damaging pump internals. This is called the cavitation. ... . It is the head available at the eye of the impeller corrected to vapour pressure. 

Air vessel provided in a reciprocating pump (A) Smoothens the flow by avoiding pulsations (B) Increases the volumetric efficiency of the pump (C) Saves the pump from the danger of cavitation (D) None of these

Description : Air vessel provided in a reciprocating pump (A) Smoothens the flow by avoiding pulsations (B) Increases the volumetric efficiency of the pump (C) Saves the pump from the danger of cavitation (D) None of these

Last Answer : (D) None of these

. A special type of liquid transporting device is the diffuser pump, in which __________ are minimised. (A) Bearing losses (B) Disk friction (C) Shock losses (D) Cavitation

Description : . A special type of liquid transporting device is the diffuser pump, in which __________ are minimised. (A) Bearing losses (B) Disk friction (C) Shock losses (D) Cavitation

Last Answer : (C) Shock losses

The phenomenon occuring during pumping of a liquid solution containing dissolved gases, which may come out of the solution giving rise to gas pockets, is termed as (A) Evaporation (B) Cavitation (C) Sublimation (D) Stripping

Description : The phenomenon occuring during pumping of a liquid solution containing dissolved gases, which may come out of the solution giving rise to gas pockets, is termed as (A) Evaporation (B) Cavitation (C) Sublimation (D) Stripping

Last Answer : (B) Cavitation

Function of air vessel provided in a reciprocating pump is to (A) Reduce discharge fluctuation (B) Reduce the danger of cavitation (C) Avoid the necessity of priming (D) Increase the pump efficiency

Description : Function of air vessel provided in a reciprocating pump is to (A) Reduce discharge fluctuation (B) Reduce the danger of cavitation (C) Avoid the necessity of priming (D) Increase the pump efficiency

Last Answer : (A) Reduce discharge fluctuation

Air vessel fitted to a reciprocating pump (A) Increases the work done (B) Decreases the work done (C) Causes cavitation (D) Results in non-uniform discharge

Description : Air vessel fitted to a reciprocating pump (A) Increases the work done (B) Decreases the work done (C) Causes cavitation (D) Results in non-uniform discharge

Last Answer : (B) Decreases the work done

The major reason of hydrodynamic noise (i.e., noise resulting from liquid flow) is (A) Pipe vibrations (B) Cavitation (C) Boundary layer separation (D) Fluctuation in liquid flow

Description : The major reason of hydrodynamic noise (i.e., noise resulting from liquid flow) is (A) Pipe vibrations (B) Cavitation (C) Boundary layer separation (D) Fluctuation in liquid flow

Last Answer : (B) Cavitation

Good design of the casing of a centrifugal pump aims at minimising the (A) Cavitation (B) Frictional losses (C) Kinetic energy loss (D) Static head

Description : Good design of the casing of a centrifugal pump aims at minimising the (A) Cavitation (B) Frictional losses (C) Kinetic energy loss (D) Static head

Last Answer : Option C

What Is Cavitation?

Description : What Is Cavitation?

Last Answer : Cavitation is the formation of vapor cavities (Air bubbles) in a liquid.

Why Cavitation Will Occur In Centrifugal Pumps And Not In Displacement Pumps?

Description : Why Cavitation Will Occur In Centrifugal Pumps And Not In Displacement Pumps?

Last Answer : The formation of cavities (or bubbles) is induced by flow separation, or non-uniform flow velocities, inside a pump casing. In centrifugal pumps the eye of the pump impeller is smaller than ... to increase in temperature in impeller. This air bubbles are transmitted to pump which forms cavitation.

How Cavitation Can Be Eliminated In A Pump?

Description : How Cavitation Can Be Eliminated In A Pump?

Last Answer : Cavitation means bubbles are forming in the liquid.  To avoid Cavitation, we have to increase the Pump size to One or Two Inch;  To increase the pressure of the Suction Head, or  Decrease the Pump Speed.

The formation of pockets of gas in a liquid is called: w) absorption x) cavitation y) adsorption z) dissolving

Description : The formation of pockets of gas in a liquid is called: w) absorption x) cavitation y) adsorption z) dissolving

Last Answer : ANSWER: X -- CAVITATION

Most rivers flowing west from the Western Ghats do not Corm deltas because of (a) lack of eroded material (b) the high gradient (c) lack of vegetation free area (d) low velocity

Description : Most rivers flowing west from the Western Ghats do not Corm deltas because of (a) lack of eroded material (b) the high gradient (c) lack of vegetation free area (d) low velocity

Last Answer : Ans: (b)

In which of the following situations a buyer power is NOT likely to be high? A. Where switching costs are low B. Where ultimate consumer power is weak C. Where the buyer can threaten to compete D. Where a few big customers account for the majority of Sales

Description : In which of the following situations a buyer power is NOT likely to be high? A. Where switching costs are low B. Where ultimate consumer power is weak C. Where the buyer can threaten to compete D. Where a few big customers account for the majority of Sales

Last Answer : Where ultimate consumer power is weak

Why are visible-light LEDs not used for fiber optics? ∙ a. It has high losses ∙ b. It has short wave ∙ c. It has low attenuation ∙ d. It has weak signal

Description : Why are visible-light LEDs not used for fiber optics? ∙ a. It has high losses ∙ b. It has short wave ∙ c. It has low attenuation ∙ d. It has weak signal

Last Answer : ∙ a. It has high losses

Which of the following statements is FALSE about weak entity set ? (A) Weak entities can be deleted automatically when their strong entity is deleted. (B) Weak entity set avoids the data duplication and consequent possible inconsistencies caused by duplicating the key of the strong entity. (C) A weak entity set has no primary keys unless attributes of the strong entity set on which it depends are included. (D) Tuples in a weak entity set are not partitioned according to their relationship with tuples in a strong entity set.

Description : Which of the following statements is FALSE about weak entity set ? (A) Weak entities can be deleted automatically when their strong entity is deleted. (B) Weak entity set avoids the data ... weak entity set are not partitioned according to their relationship with tuples in a strong entity set.

Last Answer : (D) Tuples in a weak entity set are not partitioned according to their relationship with tuples in a strong entity set.

Of the following statements, which best distinguishes ordinary negligence from gross negligence? a. The more material the undetected error the greater the likelihood of ordinary negligence. b. Gross negligence is most probable when the auditor fails to detect errors that occurred under conditions of strong internal control. c. Failure to detect material errors, whether internal control is strong or weak, suggests gross negligence. d. Failure to exercise reasonable care denotes ordinary negligence, whereas failure to exercise minimal care indicates gross negligence

Description : Of the following statements, which best distinguishes ordinary negligence from gross negligence? a. The more material the undetected error the greater the likelihood of ordinary negligence. ... care denotes ordinary negligence, whereas failure to exercise minimal care indicates gross negligence

Last Answer : Failure to exercise reasonable care denotes ordinary negligence, whereas failure to exercise minimal care indicates gross negligence

Which of the following conditions suggests auditor negligence? a. Failure to detect collusive fraud perpetrated by members of middle management. b. Failure to detect collusive fraud perpetrated by members of top management. c. Failure to detect errors occurring outside the internal control structure. d. Failure to detect material errors under conditions of weak internal control

Description : Which of the following conditions suggests auditor negligence? a. Failure to detect collusive fraud perpetrated by members of middle management. b. Failure to detect collusive fraud perpetrated by ... control structure. d. Failure to detect material errors under conditions of weak internal control

Last Answer : Failure to detect material errors under conditions of weak internal control

For a particular assertion, control risk is the risk that a. Controls will not detect a material misstatement that occurs. b. Audit procedures will fail to detect a weak control system. c. The prescribed control procedures will not be applied uniformly. d. A material misstatement will occur in theaccounting process

Description : For a particular assertion, control risk is the risk that a. Controls will not detect a material misstatement that occurs. b. Audit procedures will fail to detect a weak control system ... procedures will not be applied uniformly. d. A material misstatement will occur in theaccounting process

Last Answer : Controls will not detect a material misstatement that occurs

Pick up the correct statement from the following: (A) The regular periodic rise and fall of the surface of the sea, is called tide (B) The average difference in water level between high tide and low tide at a place, is called tidal range (C) The movement of water caused by the action of tide, is called a tidal current (D) all of the above

Description : Pick up the correct statement from the following: (A) The regular periodic rise and fall of the surface of the sea, is called tide (B) The average difference in water level between high tide and low tide ... of water caused by the action of tide, is called a tidal current (D) all of the above

Last Answer : (D) all of the above

What is the major cause of 'October Heat'? (1) Hot and dry weather (2) Very low velocity winds (3) Low pressure systems over the IndoGangetic plains (4) High temperature associated with high humidity

Description : What is the major cause of 'October Heat'? (1) Hot and dry weather (2) Very low velocity winds (3) Low pressure systems over the IndoGangetic plains (4) High temperature associated with high humidity

Last Answer : (4) High temperature associated with high humidity Explanation: The months of OctoberNovember mark a period of transition from hot rainy season to cold dry winter conditions. This period is ... temperature and high humidity, weather becomes oppressive. This phenomenon is known as 'October heat.

Flooding in a column results due to (A) High pressure drop (B) Low pressure drop (C) Low velocity of the liquid (D) High temperature

Description : Flooding in a column results due to (A) High pressure drop (B) Low pressure drop (C) Low velocity of the liquid (D) High temperature

Last Answer : (A) High pressure drop

Bernoulli's principle shows that, at points in a moving fluid where the potential energy change is very small A. the pressure is low where the velocity is low and similarly, the pressure is high where the velocity is high B. the pressure is low where the velocity is high and conversely, the pressure is high where the velocity is low C. pressure becomes independent of the velocity of the moving fluid D. pressure remain independent of the speed of the stationary fluid

Description : Bernoulli's principle shows that, at points in a moving fluid where the potential energy change is very small A. the pressure is low where the velocity is low and similarly, the pressure is ... of the moving fluid D. pressure remain independent of the speed of the stationary fluid

Last Answer : the pressure is low where the velocity is high and conversely, the pressure is high where the velocity is low

Though kinetics of ammonia synthesis dictates the use of low temperature for high equilibrium conversion, yet it is kept moderately high (550°C), because at low temperature (A) Rate of reaction is very low (B) Very high pressure is required resulting in costly pressure vessel (C) Space velocity of gas is very low resulting in decreased conversion (D) None of these

Description : Though kinetics of ammonia synthesis dictates the use of low temperature for high equilibrium conversion, yet it is kept moderately high (550°C), because at low temperature (A) Rate of reaction is very low ... (C) Space velocity of gas is very low resulting in decreased conversion (D) None of these

Last Answer : (A) Rate of reaction is very low

Water hammer is caused, when water flowing in a pipe is suddenly brought to rest by closing the valve. The extent of pressure thus produced due to water hammer depends on the (A) Pipe length (B) Fluid velocity in the pipe (C) Time taken to close the valve (D) All (A), (B) and (C)

Description : Water hammer is caused, when water flowing in a pipe is suddenly brought to rest by closing the valve. The extent of pressure thus produced due to water hammer depends on the (A) Pipe length (B) Fluid velocity in the pipe (C) Time taken to close the valve (D) All (A), (B) and (C)

Last Answer : (D) All (A), (B) and (C)

Excess of alumina in brick earth makes the brick (A) Impermeable (B) Brittle and weak (C) To lose cohesion (D) To crack and warp on drying

Description : Excess of alumina in brick earth makes the brick (A) Impermeable (B) Brittle and weak (C) To lose cohesion (D) To crack and warp on drying

Last Answer : Answer: Option D

Due to Bleeding action concrete becomes [ A ] Weak [ B ] Strong [ C ] Hard [ D ] Durable

Description : Due to Bleeding action concrete becomes [ A ] Weak [ B ] Strong [ C ] Hard [ D ] Durable

Last Answer : [ A ] Weak

Concrete is [ A ] Weak in tension [ B ] Strong in tension [ C ] Strong in both tension and compression [ D ] Weak in compression

Description : Concrete is [ A ] Weak in tension [ B ] Strong in tension [ C ] Strong in both tension and compression [ D ] Weak in compression

Last Answer : [ A ] Weak in tension