The piece of a brick cut with its one corner equivalent to half the length and half the width of a full brick, is known as (A) Queen closer (B) Bevelled closer (C) King closer (D) Half king clos

The piece of a brick cut with its one corner equivalent to half the length and half the width of a full
brick, is known as
(A) Queen closer
(B) Bevelled closer
(C) King closer
(D) Half king clos
by

1 Answer

Answer :

Answer: Option C
by

Related questions

The piece of a brick cut along the centre of width in such a way that its length is equal to that of full brick, is called (A) Half brick (B) Queen closer (C) King closer (D) Bevelled closer

Description : The piece of a brick cut along the centre of width in such a way that its length is equal to that of full brick, is called (A) Half brick (B) Queen closer (C) King closer (D) Bevelled closer

Last Answer : Answer: Option B

The portion of the brick without a triangular corner equal to half the width and half the length, is called (A) Closer (B) Queen closer (C) King closer (D) Squint brick

Description : The portion of the brick without a triangular corner equal to half the width and half the length, is called (A) Closer (B) Queen closer (C) King closer (D) Squint brick

Last Answer : Answer: Option C

The portion of the brick cut across its width and having its length equal to that of a full brick, is known as (A) Closer (B) Queen closer (C) King closer (D) Prince closer

Description : The portion of the brick cut across its width and having its length equal to that of a full brick, is known as (A) Closer (B) Queen closer (C) King closer (D) Prince closer

Last Answer : Answer: Option B

A queen closer is a (A) Brick laid with its length parallel to the face or direction of wall (B) Brick laid with its breadth parallel to the face or direction of wall (C) Brick having the same length and depth as the other bricks but half the breadth (D) Brick with half the width at one end and full width at the other

Description : A queen closer is a (A) Brick laid with its length parallel to the face or direction of wall (B) Brick laid with its breadth parallel to the face or direction of wall (C) Brick having the same ... bricks but half the breadth (D) Brick with half the width at one end and full width at the other

Last Answer : Answer: Option C

The portion of a brick cut to form angles other than right angles in plan, is known as (A) Queen closer (B) King closer (C) Closer (D) Squint brick

Description : The portion of a brick cut to form angles other than right angles in plan, is known as (A) Queen closer (B) King closer (C) Closer (D) Squint brick

Last Answer : Answer: Option D

The portion of a brick cut across the width, is called (A) Closer (B) Half brick (C) Bed (D) Ba

Description : The portion of a brick cut across the width, is called (A) Closer (B) Half brick (C) Bed (D) Bat

Last Answer : Answer: Option D

To stagger vertical joints in successive courses of a wall, a piece of brick is generally used at the end of the course, which is known as (A) Bat (B) Header (C) Stretcher (D) Closer

Description : To stagger vertical joints in successive courses of a wall, a piece of brick is generally used at the end of the course, which is known as (A) Bat (B) Header (C) Stretcher (D) Closer

Last Answer : Answer: Option D

Which of the following should be used for hearting of thicker walls? (A) Headers (B) Stretchers (C) Brick bats (D) Queen closer

Description : Which of the following should be used for hearting of thicker walls? (A) Headers (B) Stretchers (C) Brick bats (D) Queen closer

Last Answer : Answer: Option A

Queen closer may be placed (A) In header course (B) In stretcher course (C) In header course next to first brick (D) In stretcher course next to first brick

Description : Queen closer may be placed (A) In header course (B) In stretcher course (C) In header course next to first brick (D) In stretcher course next to first brick

Last Answer : Answer: Option C

The brick laid with its length parallel to the face of a wall, is a known as (A) Header (B) Stretcher (C) Closer (D) None of the

Description : The brick laid with its length parallel to the face of a wall, is a known as (A) Header (B) Stretcher (C) Closer (D) None of the

Last Answer : Answer: Option B

The dimensions of a half queen closer, are (A) 9 cm × 9 cm × 9 cm (B) 9 cm × 9 cm × 4.5 cm (C) 9 cm × 4.5 cm × 9 cm (D) 1.8 cm × 4.5 cm × 9 cm

Description : The dimensions of a half queen closer, are (A) 9 cm × 9 cm × 9 cm (B) 9 cm × 9 cm × 4.5 cm (C) 9 cm × 4.5 cm × 9 cm (D) 1.8 cm × 4.5 cm × 9 cm

Last Answer : Answer: Option C

The brick laid with its breadth parallel to the face of a wall, is known as (A) Header (B) Stretcher (C) Closer (D) None of these

Description : The brick laid with its breadth parallel to the face of a wall, is known as (A) Header (B) Stretcher (C) Closer (D) None of these

Last Answer : Answer: Option A

In English garden wall bond (A) One course of headers to three or five course of stretchers (B) Queen closer in provided in each heading course (C) The middle course of stretchers is started with a header to give proper vertical joints (D) All the above

Description : In English garden wall bond (A) One course of headers to three or five course of stretchers (B) Queen closer in provided in each heading course (C) The middle course of stretchers is started with a header to give proper vertical joints (D) All the above

Last Answer : Answer: Option D

The weaving length of a roadway is the distance (A) Between the channelizing islands (B) Equal to half circumference (C) Equal to total width of adjoining radial roads (D) Equal to diameter of rotary

Description : The weaving length of a roadway is the distance (A) Between the channelizing islands (B) Equal to half circumference (C) Equal to total width of adjoining radial roads (D) Equal to diameter of rotary

Last Answer : Answer: Option A

Based onthe Clos criteria, if N = 200, then the minimum number of crosspoints isgreater thanor equal to _______. A) 15,200 B) 18,000 C) 42,000 D) 20,000

Description : Based onthe Clos criteria, if N = 200, then the minimum number of crosspoints isgreater thanor equal to _______. A) 15,200 B) 18,000 C) 42,000 D) 20,000

Last Answer : 15,200

Based onthe Clos criteria, if N = 200, then k mustbe equal to or greater than____. A) 21 B) 19 C) 31 D) 41

Description : Based onthe Clos criteria, if N = 200, then k mustbe equal to or greater than____. A) 21 B) 19 C) 31 D) 41

Last Answer : 19

Based onthe Clos criteria, if N = 200, then n mustbe equal to or greater than____. A) 10 B) 20 C) 30 D) 40

Description : Based onthe Clos criteria, if N = 200, then n mustbe equal to or greater than____. A) 10 B) 20 C) 30 D) 40

Last Answer : 10

The length of a rectangular piece of fabric is twice its width . identify the geometrical representation of this situation when represented as an equation in two variables. Width and length be represented as x and y respectively . -Maths 9th

Description : The length of a rectangular piece of fabric is twice its width . identify the geometrical representation of this situation when represented as an equation in two variables. Width and length be represented as x and y respectively . -Maths 9th

Last Answer : answer:

If the length of a wall on either side of a lintel opening is at least half of its effective span L, the load W carried by the lintel is equivalent to the weight of brickwork contained in an equilateral triangle, producing a maximum bending moment (A) WL/2 (B) WL/4 (C) WL/6 (D) WL/8

Description : If the length of a wall on either side of a lintel opening is at least half of its effective span L, the load W carried by the lintel is equivalent to the weight of brickwork contained in an equilateral triangle, producing a maximum bending moment (A) WL/2 (B) WL/4 (C) WL/6 (D) WL/8

Last Answer : Answer: Option C

A piece of timber whose thickness and width are respectively 5 cm and 10 cm is called (A) Slate (B) Plank (C) Board (D) Strip

Description : A piece of timber whose thickness and width are respectively 5 cm and 10 cm is called (A) Slate (B) Plank (C) Board (D) Strip

Last Answer : Answer: Option D

You are asked to design and supervise a truss for a factory to have spans 6 m to 9 m. The type of the truss you will use, is (A) Mansard truss (B) Queen post truss (C) King post truss (D) Collar truss

Description : You are asked to design and supervise a truss for a factory to have spans 6 m to 9 m. The type of the truss you will use, is (A) Mansard truss (B) Queen post truss (C) King post truss (D) Collar truss

Last Answer : Answer: Option C

Pick up the incorrect statement from the following: (A) In king post truss, one vertical post is used (B) In a queen post truss, one vertical post is used (C) In a queen post truss, two vertical posts are used (D) None of thes

Description : Pick up the incorrect statement from the following: (A) In king post truss, one vertical post is used (B) In a queen post truss, one vertical post is used (C) In a queen post truss, two vertical posts are used (D) None of thes

Last Answer : Answer: Option B

The expected out turn of half brick partition wall per mason per day is (A) 1.5 m3 (B) 2.0 m3 (C) 4.0 m2 (D) 5.0 m2

Description : The expected out turn of half brick partition wall per mason per day is (A) 1.5 m3 (B) 2.0 m3 (C) 4.0 m2 (D) 5.0 m2

Last Answer : (B) 2.0 m3

The brick work is measured in sq metre, in case of (A) Honey comb brick work (B) Brick flat soling (C) Half brick walls or the partition (D) All the above

Description : The brick work is measured in sq metre, in case of (A) Honey comb brick work (B) Brick flat soling (C) Half brick walls or the partition (D) All the above

Last Answer : (D) All the above

The brick work is not measured in cu m in case of (A) One or more than one brick wall (B) Brick work in arches (C) Reinforced brick work (D) Half brick wall

Description : The brick work is not measured in cu m in case of (A) One or more than one brick wall (B) Brick work in arches (C) Reinforced brick work (D) Half brick wall

Last Answer : (D) Half brick wall

Minimum thickness of wall where single Flemish bond can be used is (A) Half brick thick (B) One brick thick (C) One and a half bricks thick (D) Two bricks thick

Description : Minimum thickness of wall where single Flemish bond can be used is (A) Half brick thick (B) One brick thick (C) One and a half bricks thick (D) Two bricks thick

Last Answer : Answer: Option C

Pick up the correct statement from the following: (A) English bond is used for brick masonry to support heavy loads (B) Double-Flemish bond is suitable for brick masonry to give uniform face appearance (C) The stretcher bond is used for the construction of half brick masonry brick (D) All the above

Description : Pick up the correct statement from the following: (A) English bond is used for brick masonry to support heavy loads (B) Double-Flemish bond is suitable for brick masonry to give uniform face ... The stretcher bond is used for the construction of half brick masonry brick (D) All the above

Last Answer : Answer: Option D

Secondary steel has to be provided across__________ of flanged beams [ A ] Full effective width of flange [ B ] The width of web [ C ] Half of the width of flange [ D ] None of the above.

Description : Secondary steel has to be provided across__________ of flanged beams [ A ] Full effective width of flange [ B ] The width of web [ C ] Half of the width of flange [ D ] None of the above.

Last Answer : [ A ] Full effective width of flange

By which dimensional cut is the COMBINE indicated a) Length b) Width c) Diameter d) Diagonal

Description : By which dimensional cut is the COMBINE indicated a) Length b) Width c) Diameter d) Diagonal

Last Answer : Width

Take a 250 mL beaker/glass tumbler. Fill half of it with water. Now carefully cut a small piece of sodium metal. Dry it using filter paper and wrap it in a small piece of cotton. Put the sodium piece wrapped in cotton into the beaker. Observe carefully. -Science

Description : Take a 250 mL beaker/glass tumbler. Fill half of it with water. Now carefully cut a small piece of sodium metal. Dry it using filter paper and wrap it in a small piece of cotton. Put the sodium piece wrapped in cotton into the beaker. Observe carefully. -Science

Last Answer : On touching the beaker, it was felt hot. The solution turns the red litmus paper to blue which shows it is basic in nature. Blue litmus paper do not show any colour change with the solution.

When a bar magnet is cut into two equal halves, the pole strength of each piece (1) becomes double (2) becomes half (3) becomes zero (4) remains the same

Description : When a bar magnet is cut into two equal halves, the pole strength of each piece (1) becomes double (2) becomes half (3) becomes zero (4) remains the same

Last Answer : (4) remains the same Explanation: The poles remains same whether the magnet is cut into two equal half or more and also pole strength remains same but magnetic moment reduces due to decrease in the length of ... is called north pole (N-poled of the magnet and the other end the south pole (S-pole).

When a bar magnet is cut into two equal halves, the pole strength of each piece – (1) becomes double (2) becomes half (3) becomes zero (4) remains the same

Description : When a bar magnet is cut into two equal halves, the pole strength of each piece – (1) becomes double (2) becomes half (3) becomes zero (4) remains the same

Last Answer : remains the same

A foundation is called shallow if its depth, is (A) One-fourth of its width (B) Half of its width (C) Three-fourth of its width (D) Equal to its width

Description : A foundation is called shallow if its depth, is (A) One-fourth of its width (B) Half of its width (C) Three-fourth of its width (D) Equal to its width

Last Answer : Answer: Option D

A wire of length a units is cut into two equal pieces and make a circle of radius r with one piece. Frame the formula by making r the subject.

Description : A wire of length a units is cut into two equal pieces and make a circle of radius r with one piece. Frame the formula by making r the subject.

Last Answer : A wire of length a units is cut into two equal pieces and make a circle of radius r with one piece. Frame the formula by making r the subject.

Jam nut is a locking device in which (A) A smaller nut is tightened against main nut creating friction at the contacting surface (B) A split pin is passed through diametrically opposite slots in nut and a hole in bolt and the two ends of split pin are separated and bent back on nut (C) A slot is cut in the middle of nut along the length and a cap screw is provided to tighten the two parts of nut separated by slot (D) An elastic piece is tightened in the nut by a setscrew

Description : Jam nut is a locking device in which (A) A smaller nut is tightened against main nut creating friction at the contacting surface (B) A split pin is passed through diametrically opposite slots in nut and ... parts of nut separated by slot (D) An elastic piece is tightened in the nut by a setscrew

Last Answer : (A) A smaller nut is tightened against main nut creating friction at the contacting surface

Castle nut is a locking device in which (A) A smaller nut is tightened against main nut creating friction at the contacting surface (B) A split pin is passed through diametrically opposite slots in nut and a hole in bolt and the two ends of split pin are separated and bent back on nut (C) A slot is cut in the middle of nut along the length and a cap screw is provided to tighten the two parts of nut separated by slot (D) An elastic piece is tightened in the nut by a setscrew

Description : Castle nut is a locking device in which (A) A smaller nut is tightened against main nut creating friction at the contacting surface (B) A split pin is passed through diametrically opposite slots in nut and ... of nut separated by slot (D) An elastic piece is tightened in the nut by a setscrew

Last Answer : (B) A split pin is passed through diametrically opposite slots in nut and a hole in bolt and the two ends of split pin are separated and bent back on nut

For a strongest rectangular beam cut from a circular log, the ratio of the width and depth, is (A) 0.303 (B) 0.404 (C) 0.505 (D) 0.707

Description : For a strongest rectangular beam cut from a circular log, the ratio of the width and depth, is  (A) 0.303  (B) 0.404  (C) 0.505  (D) 0.707 

Last Answer : (D) 0.707 

The width b and depth d of a beam cut from a wooden cylindrical log of 100 cm diameter for maximum strength are: (A) b = 57.73 cm d = 81.65 cm (B) b = 81.65 cm d = 57.73 cm (C) b = 50.00 cm d = 50.00 cm (D) b = 40.00 cm d = 80.00 cm

Description : The width b and depth d of a beam cut from a wooden cylindrical log of 100 cm diameter for  maximum strength are:  (A) b = 57.73 cm d = 81.65 cm  (B) b = 81.65 cm d = 57.73 cm  (C) b = 50.00 cm d = 50.00 cm  (D) b = 40.00 cm d = 80.00 cm 

Last Answer : (A) b = 57.73 cm d = 81.65 cm 

I clipped my mr. Lincoln rose bush months ago nothing is growin out. Do I need to cut closer to the ground

Description : I clipped my mr. Lincoln rose bush months ago nothing is growin out. Do I need to cut closer to the ground

Last Answer : A lot of us lost roses bushes in the last bitter winter. I am going to do hay around mine this fall to protect them.

The thickness of base slab of a retaining wall generally provided, is (A) One half of the width of the stem at the bottom (B) One-third of the width of the stem at the bottom (C) One fourth of the width of the steam at the bottom (D) Width of the stem at the bottom

Description : The thickness of base slab of a retaining wall generally provided, is (A) One half of the width of the stem at the bottom (B) One-third of the width of the stem at the bottom (C) One fourth of the width of the steam at the bottom (D) Width of the stem at the bottom

Last Answer : Answer: Option D

The effective width of a column strip of a flat slab, is (A) One-fourth the width of the panel (B) Half the width of the panel (C) Radius of the column (D) Diameter of the column

Description : The effective width of a column strip of a flat slab, is (A) One-fourth the width of the panel (B) Half the width of the panel (C) Radius of the column (D) Diameter of the column

Last Answer : Answer: Option B

The width of the flange of a L-beam, should be less than (A) One-sixth of the effective span (B) Breadth of the rib + four times thickness of the slab (C) Breadth of the rib + half clear distance between ribs (D) Least of the above

Description : The width of the flange of a L-beam, should be less than (A) One-sixth of the effective span (B) Breadth of the rib + four times thickness of the slab (C) Breadth of the rib + half clear distance between ribs (D) Least of the above

Last Answer : Answer: Option D

According to I.S. : 456, slabs which span in two directions with corners held down, are assumed to be divided in each direction into middle strips and edge strips such that the width of the middle strip, is (A) Half of the width of the slab (B) Two-third of the width of the slab (C) Three-fourth of the width of the slab (D) Four-fifth of the width of the slab

Description : According to I.S. : 456, slabs which span in two directions with corners held down, are assumed to be divided in each direction into middle strips and edge strips such that the width of the middle strip, is ... (C) Three-fourth of the width of the slab (D) Four-fifth of the width of the slab

Last Answer : Answer: Option C

A weir is said to be broad crested weir, if the width of the crest of the weir is ________ half the height of water above the weir crest. (A) Equal to (B) Less than (C) More than (D) None of these

Description : A weir is said to be broad crested weir, if the width of the crest of the weir is ________ half the height of water above the weir crest. (A) Equal to (B) Less than (C) More than (D) None of these

Last Answer : Answer: Option C

The discharge through a channel of trapezoidal section is maximum when (A) Width of channel at the top is equal to twice the width at the bottom (B) Depth of channel is equal to the width at the bottom (C) The sloping side is equal to half the width at the top (D) The sloping side is equal to the width at the bottom

Description : The discharge through a channel of trapezoidal section is maximum when (A) Width of channel at the top is equal to twice the width at the bottom (B) Depth of channel is equal to the width at the bottom ... equal to half the width at the top (D) The sloping side is equal to the width at the bottom

Last Answer : Answer: Option C

A weir is said to be narrow-crested weir, if the width of the crest of the weir is __________ half the height of water above the weir crest. (A) Equal to (B) Less than (C) More than (D) None of these

Description : A weir is said to be narrow-crested weir, if the width of the crest of the weir is __________ half the height of water above the weir crest. (A) Equal to (B) Less than (C) More than (D) None of these

Last Answer : Answer: Option B

Minimum width of landing should be (A) Equal to width of stairs (B) Half the width of stairs (C) Twice the width of stairs (D) One fourth the width of stairs

Description : Minimum width of landing should be (A) Equal to width of stairs (B) Half the width of stairs (C) Twice the width of stairs (D) One fourth the width of stairs

Last Answer : Answer: Option A

A cantilever of length 2 cm and depth 10 cm tapers in plan from a width 24 cm to zero at its free end. If the modulus of elasticity of the material is 0.2 × 106 N/mm2 , the deflection of the free end, is (A) 2 mm (B) 3 mm (C) 4 mm (D) 5 mm

Description : A cantilever of length 2 cm and depth 10 cm tapers in plan from a width 24 cm to zero at its free  end. If the modulus of elasticity of the material is 0.2 × 106  N/mm2 , the deflection of the free end,  is  (A) 2 mm  (B) 3 mm  (C) 4 mm  (D) 5 mm

Last Answer : (D) 5 mm

The deflection of any rectangular beam simply supported, is (A) Directly proportional to its weight (B) Inversely proportional to its width (C) Inversely proportional to the cube of its depth (D) Directly proportional to the cube of its length

Description : The deflection of any rectangular beam simply supported, is (A) Directly proportional to its weight (B) Inversely proportional to its width (C) Inversely proportional to the cube of its depth (D) Directly proportional to the cube of its length

Last Answer : (C) Inversely proportional to the cube of its depth

A bottle filled with previously moistened mustard seeds and water was screw capped tightly and kept in a corner. It blew up suddenly after about half an hour. The phenomenon involved is (a) diffusion (b) imbibition (c) osmosis (d) DPD.

Description : A bottle filled with previously moistened mustard seeds and water was screw capped tightly and kept in a corner. It blew up suddenly after about half an hour. The phenomenon involved is (a) diffusion (b) imbibition (c) osmosis (d) DPD.

Last Answer : b) imbibition