The brick work is not measured in cu m in case of (A) One or more than one brick wall (B) Brick work in arches (C) Reinforced brick work (D) Half brick wall

The brick work is not measured in cu m in case of
(A) One or more than one brick wall
(B) Brick work in arches
(C) Reinforced brick work
(D) Half brick wall
by

1 Answer

Answer :

(D) Half brick wall
by

Related questions

The item of the brick structure measured in sq.m, is (A) Reinforced brick work (B) Broken glass coping (C) Brick edging (D) Brick work in arches

Description : The item of the brick structure measured in sq.m, is (A) Reinforced brick work (B) Broken glass coping (C) Brick edging (D) Brick work in arches

Last Answer : (B) Broken glass coping

The brick work is measured in sq metre, in case of (A) Honey comb brick work (B) Brick flat soling (C) Half brick walls or the partition (D) All the above

Description : The brick work is measured in sq metre, in case of (A) Honey comb brick work (B) Brick flat soling (C) Half brick walls or the partition (D) All the above

Last Answer : (D) All the above

The thickness of a reinforced brick partition wall, is generally kept (A) 5 cm (B) 10 cm (C) 15 cm (D) 20 cm

Description : The thickness of a reinforced brick partition wall, is generally kept (A) 5 cm (B) 10 cm (C) 15 cm (D) 20 cm

Last Answer : Answer: Option B

Brick walls are measured in sq. m if the thickness of the wall is (A) 10 cm (B) 15 cm (C) 20 cm (D) None of these

Description : Brick walls are measured in sq. m if the thickness of the wall is (A) 10 cm (B) 15 cm (C) 20 cm (D) None of these

Last Answer : (A) 10 cm

A bull nose brick is not used for (A) Rounding off sharp corners (B) Pillars (C) Decoration purpose (D) Arches

Description : A bull nose brick is not used for (A) Rounding off sharp corners (B) Pillars (C) Decoration purpose (D) Arches

Last Answer : Answer: Option D

The recommended value of modular ratio for reinforced brick work is (A) 18 (B) 30 (C) 40 (D) 58

Description : The recommended value of modular ratio for reinforced brick work is (A) 18 (B) 30 (C) 40 (D) 58

Last Answer : (C) 40

The permissible diagonal tensile stress in reinforced brick work is (A) About 0.1 N/mm² (B) Zero (C) 0.3 N/mm² to 0.7 N/mm² (D) About 1.0 N/m2

Description : The permissible diagonal tensile stress in reinforced brick work is (A) About 0.1 N/mm² (B) Zero (C) 0.3 N/mm² to 0.7 N/mm² (D) About 1.0 N/m2

Last Answer : Answer: Option A

The position of the neutral axis in reinforced brick masonry is independent of the loading and is at a depth of

Description : The position of the neutral axis in reinforced brick masonry is independent of the loading and is at a depth of

Last Answer : (a) One-third of the effective depth

The expected out turn of half brick partition wall per mason per day is (A) 1.5 m3 (B) 2.0 m3 (C) 4.0 m2 (D) 5.0 m2

Description : The expected out turn of half brick partition wall per mason per day is (A) 1.5 m3 (B) 2.0 m3 (C) 4.0 m2 (D) 5.0 m2

Last Answer : (B) 2.0 m3

Minimum thickness of wall where single Flemish bond can be used is (A) Half brick thick (B) One brick thick (C) One and a half bricks thick (D) Two bricks thick

Description : Minimum thickness of wall where single Flemish bond can be used is (A) Half brick thick (B) One brick thick (C) One and a half bricks thick (D) Two bricks thick

Last Answer : Answer: Option C

A queen closer is a (A) Brick laid with its length parallel to the face or direction of wall (B) Brick laid with its breadth parallel to the face or direction of wall (C) Brick having the same length and depth as the other bricks but half the breadth (D) Brick with half the width at one end and full width at the other

Description : A queen closer is a (A) Brick laid with its length parallel to the face or direction of wall (B) Brick laid with its breadth parallel to the face or direction of wall (C) Brick having the same ... bricks but half the breadth (D) Brick with half the width at one end and full width at the other

Last Answer : Answer: Option C

The rate of payment is made for 100 cu m (per % cu m) in case of (A) Earth work in excavation (B) Rock cutting (C) Excavation in trenches for foundation (D) All the above

Description : The rate of payment is made for 100 cu m (per % cu m) in case of (A) Earth work in excavation (B) Rock cutting (C) Excavation in trenches for foundation (D) All the above

Last Answer : (D) All the above

An R.C.C. lintel is spanning an opening of 2 m span in a brick wall. The height of the roof is 2.9 m above the floor level and that of the opening is 2.1 m above the floor level. The lintel is to be designed for self weight plus (A) Triangular load of the wall (B) UDL of wall (C) UDL of wall + load from the roof (D) Triangular load + load from the roof

Description : An R.C.C. lintel is spanning an opening of 2 m span in a brick wall. The height of the roof is 2.9 m above the floor level and that of the opening is 2.1 m above the floor level. The lintel is to be ... (B) UDL of wall (C) UDL of wall + load from the roof (D) Triangular load + load from the roof

Last Answer : Answer: Option C

There are two hinged semicircular arches A, B and C of radii 5 m, 7.5 m and 10 m respectively and each carries a concentrated load W at their crowns. The horizontal thrust at their supports will be in the ratio of (A) 1 : 1½ : 2 (B) 2 : 1½ : 1 (C) 1 : 1 : 2(D) None of these

Description : There are two hinged semicircular arches A, B and C of radii 5 m, 7.5 m and 10 m respectively and  each carries a concentrated load W at their crowns. The horizontal thrust at their supports will be  in the ratio of  (A) 1 ... (B) 2 : 1½ : 1  (C) 1 : 1 : 2 (D) None of these

Last Answer : (C) 1 : 1 : 2 

In a singly reinforced beam, the effective depth is measured from its compression edge to (A) Tensile edge (B) Tensile reinforcement (C) Neutral axis of the beam (D) Longitudinal central axis

Description : In a singly reinforced beam, the effective depth is measured from its compression edge to (A) Tensile edge (B) Tensile reinforcement (C) Neutral axis of the beam (D) Longitudinal central axis

Last Answer : Answer: Option B

Expanded metal is (A) Manufactured from steel sheets (B) Used for reinforced concrete in road pavements (C) Measured in term of SWM (short way mesh) and LWM (long way mesh) (D) All the above

Description : Expanded metal is (A) Manufactured from steel sheets (B) Used for reinforced concrete in road pavements (C) Measured in term of SWM (short way mesh) and LWM (long way mesh) (D) All the above

Last Answer : Answer: Option D

In a singly reinforced beam, the effective depth is measured form the compression edge to the (a) Tensile edge (b) Centre of tensile reinforcement (c) Neutral axis of the beam (d) All of the above

Description : In a singly reinforced beam, the effective depth is measured form the compression edge to the (a) Tensile edge (b) Centre of tensile reinforcement (c) Neutral axis of the beam (d) All of the above

Last Answer : (b) Centre of tensile reinforcement

Consider the following activities in a building construction: 1. Concreting of roof slabs 2. Brick-jelly lime concrete terracing 3. Erection of form work for slab 4. Construction of parapet wall in terrace The correct sequence of these activities is (A) 1, 3, 2, 4 (B) 3, 1, 4, 2 (C) 3, 1, 2, 4 (D) 1, 3, 4, 2

Description : Consider the following activities in a building construction: 1. Concreting of roof slabs 2. Brick-jelly lime concrete terracing 3. Erection of form work for slab 4. Construction of parapet wall in terrace The correct sequence of these ... (B) 3, 1, 4, 2 (C) 3, 1, 2, 4 (D) 1, 3, 4, 2

Last Answer : (C) 3, 1, 2, 4

The range of spread from the wall base to outer edge of a brick work foundation does not exceed (A) 1/2 horizontal to 1 vertical (B) 2/3 horizontal to 1 vertical (C) 1 horizontal to 1 vertical (D) 2 horizontals to 1 vertical

Description : The range of spread from the wall base to outer edge of a brick work foundation does not exceed (A) 1/2 horizontal to 1 vertical (B) 2/3 horizontal to 1 vertical (C) 1 horizontal to 1 vertical (D) 2 horizontals to 1 vertical

Last Answer : Answer: Option C

Brick nogging type of partition wall, is constructed by (A) Laying bricks as stretchers in cement mortar (B) Laying bricks as headers in cement mortar (C) Reinforcing brick wall with iron straps (D) Constructing brick work within a wooden framework

Description : Brick nogging type of partition wall, is constructed by (A) Laying bricks as stretchers in cement mortar (B) Laying bricks as headers in cement mortar (C) Reinforcing brick wall with iron straps (D) Constructing brick work within a wooden framework

Last Answer : Answer: Option D

Which one of the following activities is not correct as applicable to brick corbels? (A) The maximum projection of the corbel should not be more than the thickness of the wall (B) The maximum projection of each corbel course should be limited to a quarter brick at a time (C) The discontinuous corbels are used to carry heavy concentrated loads (D) Stretcher bond is generally used for the construction of brick corbel

Description : Which one of the following activities is not correct as applicable to brick corbels? (A) The maximum projection of the corbel should not be more than the thickness of the wall (B) The ... to carry heavy concentrated loads (D) Stretcher bond is generally used for the construction of brick corbel

Last Answer : Answer: Option D

In the construction of arches, sand box method is used for (A) Centring (B) Actual laying of arch work (C) Striking of centring (D) None of the above

Description : In the construction of arches, sand box method is used for (A) Centring (B) Actual laying of arch work (C) Striking of centring (D) None of the above

Last Answer : Answer: Option C

For a wall carrying heavy load on low bearing capacity soil, (A) Lean concrete bed is provided (B) Thick concrete bed is provided (C) Reinforced concrete bed is provided (D) Both (a) and (c) of the above

Description : For a wall carrying heavy load on low bearing capacity soil, (A) Lean concrete bed is provided (B) Thick concrete bed is provided (C) Reinforced concrete bed is provided (D) Both (a) and (c) of the above

Last Answer : Answer: Option D

Arches in the form of masonry arcs struck from more than four centres, are called (A) Two curved arches (B) Gothic arches (C) Ogee arches (D) Drop gothic arches

Description : Arches in the form of masonry arcs struck from more than four centres, are called (A) Two curved arches (B) Gothic arches (C) Ogee arches (D) Drop gothic arches

Last Answer : Answer: Option C

How many bricks will be required to construct a wall 8 m long, 6 m high and 22.5 cm thick, if each brick measures 25 cm x 11.25 cm x 6 cm? -Maths 9th

Description : How many bricks will be required to construct a wall 8 m long, 6 m high and 22.5 cm thick, if each brick measures 25 cm x 11.25 cm x 6 cm? -Maths 9th

Last Answer : ∵ Volume of one brick = (25 × 11.25 × 6) cm3 and volume of the wall = (800 × 600 × 22.5) cm3 ∴ Number of bricks = Volume of the walls / Volume of one brick = 800 × 600 × 22.5 / 25 × 11.25 × 6 = 6400

How many bricks will be required to construct a wall 8 m long, 6 m high and 22.5 cm thick, if each brick measures 25 cm x 11.25 cm x 6 cm? -Maths 9th

Description : How many bricks will be required to construct a wall 8 m long, 6 m high and 22.5 cm thick, if each brick measures 25 cm x 11.25 cm x 6 cm? -Maths 9th

Last Answer : ∵ Volume of one brick = (25 × 11.25 × 6) cm3 and volume of the wall = (800 × 600 × 22.5) cm3 ∴ Number of bricks = Volume of the walls / Volume of one brick = 800 × 600 × 22.5 / 25 × 11.25 × 6 = 6400

A furnace is made of a refractory brick wall of thickness 0.5 metre and thermal conductivity 0.7 W/m.°K For the same temperature drop and heat loss, this refractory wall can be replaced by a layer of diatomaceous earth of thermal conductivity 0.14 W/m.K and thickness __________ metre. (A) 0.01 (B) 0.1 (C) 0.25 (D) 0.5

Description : A furnace is made of a refractory brick wall of thickness 0.5 metre and thermal conductivity 0.7 W/m.°K For the same temperature drop and heat loss, this refractory wall can be replaced by a layer of diatomaceous earth of ... and thickness __________ metre. (A) 0.01 (B) 0.1 (C) 0.25 (D) 0.5

Last Answer : (B) 0.1

The lintels are preferred to arches because (A) Arches require more headroom to span the openings like doors, windows etc. (B) Arches require strong abutments to withstand arch thrust (C) Arches are difficult in construction (D) All of the abo

Description : The lintels are preferred to arches because (A) Arches require more headroom to span the openings like doors, windows etc. (B) Arches require strong abutments to withstand arch thrust (C) Arches are difficult in construction (D) All of the above

Last Answer : Answer: Option D

Pick up the correct statement from the following: (A) The breakwater which can be used as a platform for loading and unloading of cargo is called a mole (B) The brick masonry retaining wall which is used for loading and unloading of cargo is called quay wall (C) Three types of break waters are generally provided in harbours (D) All of the above

Description : Pick up the correct statement from the following: (A) The breakwater which can be used as a platform for loading and unloading of cargo is called a mole (B) The brick masonry retaining wall which is ... wall (C) Three types of break waters are generally provided in harbours (D) All of the above

Last Answer : (D) All of the above

The stretcher bond in brick masonry can be used only when the thickness of wall is (A) 90 mm (B) 180 mm (C) 190 mm (D) 280 mm

Description : The stretcher bond in brick masonry can be used only when the thickness of wall is (A) 90 mm (B) 180 mm (C) 190 mm (D) 280 mm

Last Answer : Answer: Option A

The method of moving each brick through a small horizontal distance before it is finally laid in any brick wall and pressing it by means of brick hammer, is known as (A) Trowelling (B) Laying (C) Grouting (D) Placing

Description : The method of moving each brick through a small horizontal distance before it is finally laid in any brick wall and pressing it by means of brick hammer, is known as (A) Trowelling (B) Laying (C) Grouting (D) Placing

Last Answer : Answer: Option B

The brick laid with its length parallel to the face of a wall, is a known as (A) Header (B) Stretcher (C) Closer (D) None of the

Description : The brick laid with its length parallel to the face of a wall, is a known as (A) Header (B) Stretcher (C) Closer (D) None of the

Last Answer : Answer: Option B

The brick laid with its breadth parallel to the face of a wall, is known as (A) Header (B) Stretcher (C) Closer (D) None of these

Description : The brick laid with its breadth parallel to the face of a wall, is known as (A) Header (B) Stretcher (C) Closer (D) None of these

Last Answer : Answer: Option A

The 9 cm × 9 cm side of a brick as seen in the wall face, is generally known as (A) Stretcher (B) Face (C) Front (D) Heade

Description : The 9 cm × 9 cm side of a brick as seen in the wall face, is generally known as (A) Stretcher (B) Face (C) Front (D) Heade

Last Answer : Answer: Option D

The nominal thickness of one brick wall in mm, is (A) 90 mm (B) 150 mm (C) 190 mm (D) 200 mm

Description : The nominal thickness of one brick wall in mm, is (A) 90 mm (B) 150 mm (C) 190 mm (D) 200 mm

Last Answer : Answer: Option D

To stagger vertical joints in successive courses of a wall, a piece of brick is generally used at the end of the course, which is known as (A) Bat (B) Header (C) Stretcher (D) Closer

Description : To stagger vertical joints in successive courses of a wall, a piece of brick is generally used at the end of the course, which is known as (A) Bat (B) Header (C) Stretcher (D) Closer

Last Answer : Answer: Option D

The 19 cm × 9 cm side of a brick as seen in the wall face, is generally known as (A) Stretcher (B) Face (C) Front (D) Heade

Description : The 19 cm × 9 cm side of a brick as seen in the wall face, is generally known as (A) Stretcher (B) Face (C) Front (D) Header

Last Answer : Answer: Option A

Find the correct statement from the followings. (a) For a cantilever slab, the ratio of span to overall depth should not 12. (b) One way slab which carry uniformly distributed load should be designed to resist a sagging bending moment near mid-span. (c) When the slab is built into a brick or masonry wall the slab should be designed to resist a hogging moment at the face of the support. (d) All of the above.

Description : Find the correct statement from the followings. (a) For a cantilever slab, the ratio of span to overall depth should not 12. (b) One way slab which carry uniformly distributed load should be designed to ... be designed to resist a hogging moment at the face of the support. (d) All of the above.

Last Answer : (d) All of the above.

In arches, stratified stones are placed so that their planes are (A) Parallel (B) Perpendicular (C) Radial (D) None of these

Description : In arches, stratified stones are placed so that their planes are (A) Parallel (B) Perpendicular (C) Radial (D) None of these

Last Answer : Answer: Option C

A heavy stone is suitable for (A) Arches (B) Rubble masonry (C) Roads (D) Retaining walls

Description : A heavy stone is suitable for (A) Arches (B) Rubble masonry (C) Roads (D) Retaining walls

Last Answer : Answer: Option D

Pick up the correct statement from the following: (A) Soft stones are required for carving (B) Light stones are required for arches (C) Hard stones are required to stand high pressure (D) All the above

Description : Pick up the correct statement from the following: (A) Soft stones are required for carving (B) Light stones are required for arches (C) Hard stones are required to stand high pressure (D) All the above

Last Answer : Answer: Option D

Pick up the correct statement from the following: (A) In stone arches, the stones are placed with their natural beds radial (B) In cornices, the stones are placed with their natural beds as vertical (C) In stone walls, the stones are placed with their natural beds as horizontal (D) All the above

Description : Pick up the correct statement from the following: (A) In stone arches, the stones are placed with their natural beds radial (B) In cornices, the stones are placed with their natural beds as vertical (C) In stone walls, the stones are placed with their natural beds as horizontal (D) All the above

Last Answer : Answer: Option D

The triangular portion between any two adjacent arches and the tangent to their crowns, is (A) Haunch (B) Spandril (C) Soffit (D) Rise

Description : The triangular portion between any two adjacent arches and the tangent to their crowns, is (A) Haunch (B) Spandril (C) Soffit (D) Rise

Last Answer : Answer: Option B

The portion of the brick without a triangular corner equal to half the width and half the length, is called (A) Closer (B) Queen closer (C) King closer (D) Squint brick

Description : The portion of the brick without a triangular corner equal to half the width and half the length, is called (A) Closer (B) Queen closer (C) King closer (D) Squint brick

Last Answer : Answer: Option C

The portion of a brick cut across the width, is called (A) Closer (B) Half brick (C) Bed (D) Ba

Description : The portion of a brick cut across the width, is called (A) Closer (B) Half brick (C) Bed (D) Bat

Last Answer : Answer: Option D

Pick up the correct statement from the following: (A) English bond is used for brick masonry to support heavy loads (B) Double-Flemish bond is suitable for brick masonry to give uniform face appearance (C) The stretcher bond is used for the construction of half brick masonry brick (D) All the above

Description : Pick up the correct statement from the following: (A) English bond is used for brick masonry to support heavy loads (B) Double-Flemish bond is suitable for brick masonry to give uniform face ... The stretcher bond is used for the construction of half brick masonry brick (D) All the above

Last Answer : Answer: Option D

The piece of a brick cut along the centre of width in such a way that its length is equal to that of full brick, is called (A) Half brick (B) Queen closer (C) King closer (D) Bevelled closer

Description : The piece of a brick cut along the centre of width in such a way that its length is equal to that of full brick, is called (A) Half brick (B) Queen closer (C) King closer (D) Bevelled closer

Last Answer : Answer: Option B

The piece of a brick cut with its one corner equivalent to half the length and half the width of a full brick, is known as (A) Queen closer (B) Bevelled closer (C) King closer (D) Half king clos

Description : The piece of a brick cut with its one corner equivalent to half the length and half the width of a full brick, is known as (A) Queen closer (B) Bevelled closer (C) King closer (D) Half king clos

Last Answer : Answer: Option C

For 12 mm thick cement plastering 1 : 6 on 100 sq.m new brick work, the quantity of cement required, is (A) 0.200 m3 (B) 0.247 m3 (C) 0.274 m3 (D) 0.295 m

Description : For 12 mm thick cement plastering 1 : 6 on 100 sq.m new brick work, the quantity of cement required, is (A) 0.200 m3 (B) 0.247 m3 (C) 0.274 m3 (D) 0.295 m

Last Answer : (C) 0.274 m3

The reinforced concrete beam which has width 25 cm, lever arm 40 cm, shear force 6t/cm2 , safe shear stress 5 kg/cm2 and B.M. 24 mt, (A) Is safe in shear (B) Is unsafe in shear (C) Is over safe in shear(D) Needs redesigning

Description : The reinforced concrete beam which has width 25 cm, lever arm 40 cm, shear force 6t/cm2 , safe shear stress 5 kg/cm2 and B.M. 24 mt, (A) Is safe in shear (B) Is unsafe in shear (C) Is over safe in shear (D) Needs redesigning

Last Answer : Answer: Option B