The brick work is measured in sq metre, in case of (A) Honey comb brick work (B) Brick flat soling (C) Half brick walls or the partition (D) All the above

The brick work is measured in sq metre, in case of
(A) Honey comb brick work
(B) Brick flat soling
(C) Half brick walls or the partition
(D) All the above
by

1 Answer

Answer :

(D) All the above
by

Related questions

Brick walls are measured in sq. m if the thickness of the wall is (A) 10 cm (B) 15 cm (C) 20 cm (D) None of these

Description : Brick walls are measured in sq. m if the thickness of the wall is (A) 10 cm (B) 15 cm (C) 20 cm (D) None of these

Last Answer : (A) 10 cm

In case of honey –comb structure, the water-cement ratio is (a) More than 0.35 (b) Less than 0.35 (c) More than 0.45 (d) Less than 0.45

Description : In case of honey –comb structure, the water-cement ratio is (a) More than 0.35 (b) Less than 0.35 (c) More than 0.45 (d) Less than 0.45

Last Answer : (b) Less than 0.35

The item of the brick structure measured in sq.m, is (A) Reinforced brick work (B) Broken glass coping (C) Brick edging (D) Brick work in arches

Description : The item of the brick structure measured in sq.m, is (A) Reinforced brick work (B) Broken glass coping (C) Brick edging (D) Brick work in arches

Last Answer : (B) Broken glass coping

The brick work is not measured in cu m in case of (A) One or more than one brick wall (B) Brick work in arches (C) Reinforced brick work (D) Half brick wall

Description : The brick work is not measured in cu m in case of (A) One or more than one brick wall (B) Brick work in arches (C) Reinforced brick work (D) Half brick wall

Last Answer : (D) Half brick wall

The expected out turn of half brick partition wall per mason per day is (A) 1.5 m3 (B) 2.0 m3 (C) 4.0 m2 (D) 5.0 m2

Description : The expected out turn of half brick partition wall per mason per day is (A) 1.5 m3 (B) 2.0 m3 (C) 4.0 m2 (D) 5.0 m2

Last Answer : (B) 2.0 m3

Repairing by cement pressure grouting can be adopted in case of a) Honey comb concrete b) Hollow masonry, Dormant cracks c) Deep leached mortar joints d) all the above*

Description : Repairing by cement pressure grouting can be adopted in case of a) Honey comb concrete b) Hollow masonry, Dormant cracks c) Deep leached mortar joints d) all the above*

Last Answer : d) all the above*

Pick up the correct statement regarding the centre line method of estimating a building (A) Product of the centre line of the walls and area of cross-section of any item, gives total quantity of the item (B) The centre line is worked out separately for different sections of walls of a building (C) The centre line length is reduced by half the layer of main wall joining the partition wall (D) All the above

Description : Pick up the correct statement regarding the centre line method of estimating a building (A) Product of the centre line of the walls and area of cross-section of any item, gives total quantity of the ... length is reduced by half the layer of main wall joining the partition wall (D) All the above

Last Answer : (D) All the above

Brick nogging type of partition wall, is constructed by (A) Laying bricks as stretchers in cement mortar (B) Laying bricks as headers in cement mortar (C) Reinforcing brick wall with iron straps (D) Constructing brick work within a wooden framework

Description : Brick nogging type of partition wall, is constructed by (A) Laying bricks as stretchers in cement mortar (B) Laying bricks as headers in cement mortar (C) Reinforcing brick wall with iron straps (D) Constructing brick work within a wooden framework

Last Answer : Answer: Option D

For 12 mm thick cement plastering 1 : 6 on 100 sq.m new brick work, the quantity of cement required, is (A) 0.200 m3 (B) 0.247 m3 (C) 0.274 m3 (D) 0.295 m

Description : For 12 mm thick cement plastering 1 : 6 on 100 sq.m new brick work, the quantity of cement required, is (A) 0.200 m3 (B) 0.247 m3 (C) 0.274 m3 (D) 0.295 m

Last Answer : (C) 0.274 m3

Area of steel required per metre width of pavement for a length of 20 m for design wheel load 6300 kg and permissible stress in steel 1400 kg/cm2 , is (A) 70 kg/sq cm (B) 80 kg/sq cm (C) 90 kg/sq cm (D) 100 kg/sq cm

Description : Area of steel required per metre width of pavement for a length of 20 m for design wheel load 6300 kg and permissible stress in steel 1400 kg/cm2 , is (A) 70 kg/sq cm (B) 80 kg/sq cm (C) 90 kg/sq cm (D) 100 kg/sq cm

Last Answer : Answer: Option C

In ruminents honey comb is (a) Rumen (b) Abomassum (c) Reticulum (d) None

Description : In ruminents honey comb is (a) Rumen (b) Abomassum (c) Reticulum (d) None

Last Answer : (c) Reticulum

The thickness of a reinforced brick partition wall, is generally kept (A) 5 cm (B) 10 cm (C) 15 cm (D) 20 cm

Description : The thickness of a reinforced brick partition wall, is generally kept (A) 5 cm (B) 10 cm (C) 15 cm (D) 20 cm

Last Answer : Answer: Option B

For one cubic metre of brick masonry, number of bricks required, is (A) 400 (B) 425 (C) 450 (D) 500

Description : For one cubic metre of brick masonry, number of bricks required, is (A) 400 (B) 425 (C) 450 (D) 500

Last Answer : Answer: Option D

Number of bricks required for one cubic metre of brick masonry is (A) 400 (B) 450 (C) 500 (D) 550

Description : Number of bricks required for one cubic metre of brick masonry is (A) 400 (B) 450 (C) 500 (D) 550

Last Answer : Answer: Option C

Herringbone bond is used for (A) Walls having thickness more than 4 bricks (B) Architectural finish to the face work (C) Ornamental panels in brick flooring (D) All the above

Description : Herringbone bond is used for (A) Walls having thickness more than 4 bricks (B) Architectural finish to the face work (C) Ornamental panels in brick flooring (D) All the above

Last Answer : Answer: Option D

Mastic asphalt is generally used for (A) Damp proof course (B) Water proof layer (C) Partition walls (D) Both (A) and (B

Description : Mastic asphalt is generally used for (A) Damp proof course (B) Water proof layer (C) Partition walls (D) Both (A) and (B

Last Answer : Answer: Option D

Pick up the correct statement in case of water supply. (A) Pipes laid in trenches and pipes fixed to walls are measured separately (B) Cutting through walls and floors are included with the item (C) Pipes are classified according to their sizes and quality (D) All the above

Description : Pick up the correct statement in case of water supply. (A) Pipes laid in trenches and pipes fixed to walls are measured separately (B) Cutting through walls and floors are included with the item (C) Pipes are classified according to their sizes and quality (D) All the above

Last Answer : (D) All the above

A steel rod of sectional area 250 sq. mm connects two parallel walls 5 m apart. The nuts at the ends were tightened when the rod was heated to 100°C. If steel = 0.000012/C°, Esteel = 0.2 MN/mm2 , the tensile force developed at a temperature of 50°C, is (A) 80 N/mm2 (B) 100 N/mm2 (C) 120 N/mm2 (D) 150 N/mm2 Answer: Option

Description : A steel rod of sectional area 250 sq. mm connects two parallel walls 5 m apart. The nuts at the  ends were tightened when the rod was heated to 100°C. If steel = 0.000012/C°, Esteel = 0.2  MN/mm2 , the ... N/mm2 (B) 100 N/mm2 (C) 120 N/mm2 (D) 150 N/mm2 Answer: Option 

Last Answer : (C) 120 N/mm

The plinth area of a building not includes (A) Area of the walls at the floor level (B) Internal shaft for sanitary installations up to 2 sq m. in area (C) Lift and wall including landing (D) Area of cantilevered porch

Description : The plinth area of a building not includes (A) Area of the walls at the floor level (B) Internal shaft for sanitary installations up to 2 sq m. in area (C) Lift and wall including landing (D) Area of cantilevered porch

Last Answer : (D) Area of cantilevered porch

The item of steel work which is measured in sq.m, is (A) Collapsible gates (B) Rolling shutters (C) Ventilators and glazing (D) All the above

Description : The item of steel work which is measured in sq.m, is (A) Collapsible gates (B) Rolling shutters (C) Ventilators and glazing (D) All the above

Last Answer : (D) All the above

How many 300mm circles in a sq metre?

Description : How many 300mm circles in a sq metre?

Last Answer : Assuming the 300 mm refers to the diameter, there are 9.

The unit of relative permeability is (a) henry/metre (b) henry (c) henry/sq. m (d) it is dimensionless

Description : The unit of relative permeability is (a) henry/metre (b) henry (c) henry/sq. m (d) it is dimensionless

Last Answer : (d) it is dimensionless

Stucco paints are suitable for (A) Stone masonry (B) Brick walls (C) Both (A) and (B) (D) Neither (A) nor (B)

Description : Stucco paints are suitable for (A) Stone masonry (B) Brick walls (C) Both (A) and (B) (D) Neither (A) nor (B)

Last Answer : Answer: Option C

Which of the following should be used for hearting of thicker walls? (A) Headers (B) Stretchers (C) Brick bats (D) Queen closer

Description : Which of the following should be used for hearting of thicker walls? (A) Headers (B) Stretchers (C) Brick bats (D) Queen closer

Last Answer : Answer: Option A

The nominal thickness of an expansion joint in brick walls, is kept more than (A) 5 mm (B) 10 mm (C) 15 mm (D) 20 mm

Description : The nominal thickness of an expansion joint in brick walls, is kept more than (A) 5 mm (B) 10 mm (C) 15 mm (D) 20 mm

Last Answer : Answer: Option D

For plastering the exposed brick walls, the cement sand mortar should be (A) 1 : 2 (B) 1 : 3 (C) 1 : 4 (D) 1 : 6

Description : For plastering the exposed brick walls, the cement sand mortar should be (A) 1 : 2 (B) 1 : 3 (C) 1 : 4 (D) 1 : 6

Last Answer : Answer: Option C

Pick up the incorrect statement from the following: (A) Dimensions are measured to the nearest 0.01 m (B) Areas are measured to the nearest 0.01 sq.m (C) Cubic contents are measured to the nearest 0.1 cum (D) Weights are measured to the nearest 0.001 tonnes

Description : Pick up the incorrect statement from the following: (A) Dimensions are measured to the nearest 0.01 m (B) Areas are measured to the nearest 0.01 sq.m (C) Cubic contents are measured to the nearest 0.1 cum (D) Weights are measured to the nearest 0.001 tonnes

Last Answer : (D) Weights are measured to the nearest 0.001 tonnes

Pick up the correct statement from the following: (A) Pointing is measured in sq.m (B) Plastering is measured in sq.m (C) Glazing is measured in sq.m (D) All the above

Description : Pick up the correct statement from the following: (A) Pointing is measured in sq.m (B) Plastering is measured in sq.m (C) Glazing is measured in sq.m (D) All the above

Last Answer : (D) All the above

A furnace is made of a refractory brick wall of thickness 0.5 metre and thermal conductivity 0.7 W/m.°K For the same temperature drop and heat loss, this refractory wall can be replaced by a layer of diatomaceous earth of thermal conductivity 0.14 W/m.K and thickness __________ metre. (A) 0.01 (B) 0.1 (C) 0.25 (D) 0.5

Description : A furnace is made of a refractory brick wall of thickness 0.5 metre and thermal conductivity 0.7 W/m.°K For the same temperature drop and heat loss, this refractory wall can be replaced by a layer of diatomaceous earth of ... and thickness __________ metre. (A) 0.01 (B) 0.1 (C) 0.25 (D) 0.5

Last Answer : (B) 0.1

The measurement is made for stone work in square metre in case of (A) Wall facing (B) Columns, lintels, copings (C) Building work (D) (a) and (d) of the above

Description : The measurement is made for stone work in square metre in case of (A) Wall facing (B) Columns, lintels, copings (C) Building work (D) (a) and (d) of the above

Last Answer : (D) (a) and (d) of the above

Which is best used as a sound absorbing material in partition walls? (1) Stone chips (2) Steel (3) Glass – wool (4) Glass pieces

Description : Which is best used as a sound absorbing material in partition walls? (1) Stone chips (2) Steel (3) Glass – wool (4) Glass pieces

Last Answer : (3) Glass – wool Explanation: Materials that do not transfer mechanical energy well. These tend to be soft, flexible, low density, and with high surface area to linear area ratios.

Which is best used as a sound absorbing material in partition walls? (1) Stone chips (2) Steel (3) Glass - wool (4) Glass pieces

Description : Which is best used as a sound absorbing material in partition walls? (1) Stone chips (2) Steel (3) Glass - wool (4) Glass pieces

Last Answer : (3) Glass - wool Explanation: Materials that do not transfer mechanical energy well. These tend to be soft, flexible, low density, and with high surface area to linear area ratios.

The external length, breadth and height of a closed box are 10cm, 9cm and 7cm respectively. The total inner surface area of the box is 262 sq.cm. If the walls of the box are of uniform thickness “t” cm, then “t” equals a) 1cm b) 23/3 cm c) 28/9 cm d) 42.5 cm

Description : The external length, breadth and height of a closed box are 10cm, 9cm and 7cm respectively. The total inner surface area of the box is 262 sq.cm. If the walls of the box are of uniform thickness “t” cm, then “t” equals a) 1cm b) 23/3 cm c) 28/9 cm d) 42.5 cm

Last Answer : a) 1cm

A three hinged parabolic arch hinged at the crown and springing, has a horizontal span of 4.8 m and a central rise of 1 m. It carries a uniformly distributed load of 0.75 tonne per metre over half left hand span. The horizontal thrust at the support will be (A) 10.8 tonnes (B) 1.08 tonnes (C) 1.8 tonnes (D) 0.8 tonnes

Description : A three hinged parabolic arch hinged at the crown and springing, has a horizontal span of 4.8 m  and a central rise of 1 m. It carries a uniformly distributed load of 0.75 tonne per metre over half  left hand span ... A) 10.8 tonnes  (B) 1.08 tonnes  (C) 1.8 tonnes  (D) 0.8 tonnes 

Last Answer : (B) 1.08 tonnes 

The measurement is made in square metre in case of (A) Cement concrete in foundation (B) R.C.C. structure (C) Hollow concrete block wall (D) None of these

Description : The measurement is made in square metre in case of (A) Cement concrete in foundation (B) R.C.C. structure (C) Hollow concrete block wall (D) None of these

Last Answer : (D) None of these

The portion of the brick without a triangular corner equal to half the width and half the length, is called (A) Closer (B) Queen closer (C) King closer (D) Squint brick

Description : The portion of the brick without a triangular corner equal to half the width and half the length, is called (A) Closer (B) Queen closer (C) King closer (D) Squint brick

Last Answer : Answer: Option C

Minimum thickness of wall where single Flemish bond can be used is (A) Half brick thick (B) One brick thick (C) One and a half bricks thick (D) Two bricks thick

Description : Minimum thickness of wall where single Flemish bond can be used is (A) Half brick thick (B) One brick thick (C) One and a half bricks thick (D) Two bricks thick

Last Answer : Answer: Option C

A queen closer is a (A) Brick laid with its length parallel to the face or direction of wall (B) Brick laid with its breadth parallel to the face or direction of wall (C) Brick having the same length and depth as the other bricks but half the breadth (D) Brick with half the width at one end and full width at the other

Description : A queen closer is a (A) Brick laid with its length parallel to the face or direction of wall (B) Brick laid with its breadth parallel to the face or direction of wall (C) Brick having the same ... bricks but half the breadth (D) Brick with half the width at one end and full width at the other

Last Answer : Answer: Option C

The portion of a brick cut across the width, is called (A) Closer (B) Half brick (C) Bed (D) Ba

Description : The portion of a brick cut across the width, is called (A) Closer (B) Half brick (C) Bed (D) Bat

Last Answer : Answer: Option D

Pick up the correct statement from the following: (A) English bond is used for brick masonry to support heavy loads (B) Double-Flemish bond is suitable for brick masonry to give uniform face appearance (C) The stretcher bond is used for the construction of half brick masonry brick (D) All the above

Description : Pick up the correct statement from the following: (A) English bond is used for brick masonry to support heavy loads (B) Double-Flemish bond is suitable for brick masonry to give uniform face ... The stretcher bond is used for the construction of half brick masonry brick (D) All the above

Last Answer : Answer: Option D

The piece of a brick cut along the centre of width in such a way that its length is equal to that of full brick, is called (A) Half brick (B) Queen closer (C) King closer (D) Bevelled closer

Description : The piece of a brick cut along the centre of width in such a way that its length is equal to that of full brick, is called (A) Half brick (B) Queen closer (C) King closer (D) Bevelled closer

Last Answer : Answer: Option B

The piece of a brick cut with its one corner equivalent to half the length and half the width of a full brick, is known as (A) Queen closer (B) Bevelled closer (C) King closer (D) Half king clos

Description : The piece of a brick cut with its one corner equivalent to half the length and half the width of a full brick, is known as (A) Queen closer (B) Bevelled closer (C) King closer (D) Half king clos

Last Answer : Answer: Option C

The output quality of a printer is measured by A) Dot per inch B) Dot per sq. inch C) Dots printed per unit time D) All of above

Description : The output quality of a printer is measured by A) Dot per inch B) Dot per sq. inch C) Dots printed per unit time D) All of above

Last Answer : Answer : B

The output quality of a printer is measured by A) Dot per sq. inch B) Dot per inch C) Dots printed per unit time D) All of the above

Description : The output quality of a printer is measured by A) Dot per sq. inch B) Dot per inch C) Dots printed per unit time D) All of the above

Last Answer : Answer : B

The output quality of a printer is measured bya. Dot per inchb. Dot per sq. inchc. Dots printed per unit timed. All of above

Description : The output quality of a printer is measured by a. Dot per inch b. Dot per sq. inch c. Dots printed per unit time d. All of above

Last Answer : Dot per sq. inch

The output quality of a printer is measured by a. Dot per inch b. Dot per sq. inch c. Dots printed per unit time d. All of above

Description : The output quality of a printer is measured by a. Dot per inch b. Dot per sq. inch c. Dots printed per unit time d. All of above

Last Answer : b. Dot per sq. inch

The output quality of a printer is measured by a. Dot per inch b. Dot per sq. inch c. Dots printed per unit time d. All of above

Description : The output quality of a printer is measured by a. Dot per inch b. Dot per sq. inch c. Dots printed per unit time d. All of above

Last Answer : b. Dot per sq. inch

How do you to get rid of, or kill, honey bees from in the house walls?

Description : How do you to get rid of, or kill, honey bees from in the house walls?

Last Answer : Need Answer

Pick out the wrong statement: (A) Chemical reactions with high activation energy are very temperature sensitive (B) A flat velocity profile exists in a plug flow reactor (C) The residence time for all the elements of fluid in case of a P.F.R. need not be same (D) Half life of a reaction increases with increased initial concentration for reaction orders more than one

Description : Pick out the wrong statement: (A) Chemical reactions with high activation energy are very temperature sensitive (B) A flat velocity profile exists in a plug flow reactor (C) The residence ... D) Half life of a reaction increases with increased initial concentration for reaction orders more than one

Last Answer : (C) The residence time for all the elements of fluid in case of a P.F.R. need not be same

In long and short wall method of estimation, the length of long wall is the centre to centre distance between the walls and (A) Breadth of the wall (B) Half breadth of wall on each side (C) One fourth breadth of wall on each side (D) None of these

Description : In long and short wall method of estimation, the length of long wall is the centre to centre distance between the walls and (A) Breadth of the wall (B) Half breadth of wall on each side (C) One fourth breadth of wall on each side (D) None of these

Last Answer : (B) Half breadth of wall on each side