Minimum width of landing should be (A) Equal to width of stairs (B) Half the width of stairs (C) Twice the width of stairs (D) One fourth the width of stairs

Minimum width of landing should be
(A) Equal to width of stairs
(B) Half the width of stairs
(C) Twice the width of stairs
(D) One fourth the width of stairs
by

1 Answer

Answer :

Answer: Option A
by

Related questions

A foundation is called shallow if its depth, is (A) One-fourth of its width (B) Half of its width (C) Three-fourth of its width (D) Equal to its width

Description : A foundation is called shallow if its depth, is (A) One-fourth of its width (B) Half of its width (C) Three-fourth of its width (D) Equal to its width

Last Answer : Answer: Option D

Pick up the incorrect statement from the following: (A) In dog-legged stairs, no space between its flights is provided (B) In open newel stair, a rectangular well is provided (C) In geometric stair, a curved shaped well between forward and backward flights, is provided (D) In geometrical stair, two quarter space landing is provided

Description : Pick up the incorrect statement from the following: (A) In dog-legged stairs, no space between its flights is provided (B) In open newel stair, a rectangular well is provided (C) In ... forward and backward flights, is provided (D) In geometrical stair, two quarter space landing is provided

Last Answer : Answer: Option D

The discharge through a channel of trapezoidal section is maximum when (A) Width of channel at the top is equal to twice the width at the bottom (B) Depth of channel is equal to the width at the bottom (C) The sloping side is equal to half the width at the top (D) The sloping side is equal to the width at the bottom

Description : The discharge through a channel of trapezoidal section is maximum when (A) Width of channel at the top is equal to twice the width at the bottom (B) Depth of channel is equal to the width at the bottom ... equal to half the width at the top (D) The sloping side is equal to the width at the bottom

Last Answer : Answer: Option C

The thickness of base slab of a retaining wall generally provided, is (A) One half of the width of the stem at the bottom (B) One-third of the width of the stem at the bottom (C) One fourth of the width of the steam at the bottom (D) Width of the stem at the bottom

Description : The thickness of base slab of a retaining wall generally provided, is (A) One half of the width of the stem at the bottom (B) One-third of the width of the stem at the bottom (C) One fourth of the width of the steam at the bottom (D) Width of the stem at the bottom

Last Answer : Answer: Option D

The effective width of a column strip of a flat slab, is (A) One-fourth the width of the panel (B) Half the width of the panel (C) Radius of the column (D) Diameter of the column

Description : The effective width of a column strip of a flat slab, is (A) One-fourth the width of the panel (B) Half the width of the panel (C) Radius of the column (D) Diameter of the column

Last Answer : Answer: Option B

According to I.S. : 456, slabs which span in two directions with corners held down, are assumed to be divided in each direction into middle strips and edge strips such that the width of the middle strip, is (A) Half of the width of the slab (B) Two-third of the width of the slab (C) Three-fourth of the width of the slab (D) Four-fifth of the width of the slab

Description : According to I.S. : 456, slabs which span in two directions with corners held down, are assumed to be divided in each direction into middle strips and edge strips such that the width of the middle strip, is ... (C) Three-fourth of the width of the slab (D) Four-fifth of the width of the slab

Last Answer : Answer: Option C

The Maximum shear stress in Slabs should not exceed -------- the maximum values allowed for beams. [ A ] Half Of [ B ] One-Fourth Of [ C ] Twice [ D ] Those Given In

Description : The Maximum shear stress in Slabs should not exceed -------- the maximum values allowed for beams. [ A ] Half Of [ B ] One-Fourth Of [ C ] Twice [ D ] Those Given In

Last Answer : [ A ] Half Of

A uniformly-loaded D.C. distributor is fed at both ends with equal voltages. As compared to a similar distributor fed at one end only, the drop at the middle point is (a) one-fourth (b) one-third (c) one-half (d) twice (e) none of the above

Description : A uniformly-loaded D.C. distributor is fed at both ends with equal voltages. As compared to a similar distributor fed at one end only, the drop at the middle point is (a) one-fourth (b) one-third (c) one-half (d) twice (e) none of the above

Last Answer : (a) one-fourth

For stairs spanning l metres longitudinally between supports at the bottom and top of a flight carrying a load w per unit horizontal area, the maximum bending moment per metre width, is (A) wl²/4 (B) wl²/8 (C) wl²/12 (D) wl²/16

Description : For stairs spanning l metres longitudinally between supports at the bottom and top of a flight carrying a load w per unit horizontal area, the maximum bending moment per metre width, is (A) wl²/4 (B) wl²/8 (C) wl²/12 (D) wl²/16

Last Answer : Answer: Option D

If longitudinally spanning stairs are casted along with their landings, the maximum bending moment per metre width, is taken as (A) wl²/4 (B) wl²/8 (C) wl²/10 (D) wl²/12

Description : If longitudinally spanning stairs are casted along with their landings, the maximum bending moment per metre width, is taken as (A) wl²/4 (B) wl²/8 (C) wl²/10 (D) wl²/12

Last Answer : Answer: Option B

For safe landing and takeoff, the following factors need to be carefully considered : 1. Cross-wind 2. Runway grade 3. Runway width and side clearance 4. Obstructions (a) 1, 2 and 3 only (b) 1, 2, 3 and 4 (c) 1, 3 and 4 only (d) 2, 3 and 4 only

Description : For safe landing and takeoff, the following factors need to be carefully considered : 1. Cross-wind 2. Runway grade 3. Runway width and side clearance 4. Obstructions (a) 1, 2 and 3 only (b) 1, 2, 3 and 4 (c) 1, 3 and 4 only (d) 2, 3 and 4 only

Last Answer : (b) 1, 2, 3 and 4

Width of a rotary round should be equal to (A) Twice the width of narrowest radial road (B) Width of the widest road (C) Width of the widest road plus the width of one lane (D) Width of the widest road plus 2 metres

Description : Width of a rotary round should be equal to (A) Twice the width of narrowest radial road (B) Width of the widest road (C) Width of the widest road plus the width of one lane (D) Width of the widest road plus 2 metres

Last Answer : Answer: Option C

In grillage foundations, distance between flanges of grillage beams, is kept (A) 40 cm (B) Equal to flange width (C) Twice the flange width (D) Maximum of (a), (b) and (c)

Description : In grillage foundations, distance between flanges of grillage beams, is kept (A) 40 cm (B) Equal to flange width (C) Twice the flange width (D) Maximum of (a), (b) and (c)

Last Answer : Answer: Option C

The minimum length of a plane mirror in which a person can see himself full length should be (a) equal to the person’s height (b) slightly more than his height (c) nearly half his height (d) nearly one-fourth his height

Description : The minimum length of a plane mirror in which a person can see himself full length should be (a) equal to the person’s height (b) slightly more than his height (c) nearly half his height (d) nearly one-fourth his height

Last Answer : Ans:(c)

For stairs spanning horizontally, the minimum waist provided is (A) 4 cm (B) 6 cm (C) 8 cm (D) 12 cm

Description : For stairs spanning horizontally, the minimum waist provided is (A) 4 cm (B) 6 cm (C) 8 cm (D) 12 cm

Last Answer : Answer: Option D

If the distance between the earth and the sun were twice what it is now, the gravitational force exerted on the earth by the sun would be (a) twice as large as it is now (b) four times as large as it is now (c) half of what it is now (d) one-fourth of what it is now

Description : If the distance between the earth and the sun were twice what it is now, the gravitational force exerted on the earth by the sun would be (a) twice as large as it is now (b) four times as large as it is now (c) half of what it is now (d) one-fourth of what it is now

Last Answer : Ans:(d)

Weight of a person at a height of 2R from the centre of the earth, where R is the radius of the earth- (1) remains same (2) becomes half (3) becomes twice (4) becomes one-fourth

Description : Weight of a person at a height of 2R from the centre of the earth, where R is the radius of the earth- (1) remains same (2) becomes half (3) becomes twice (4) becomes one-fourth

Last Answer : (4) becomes one-fourth Explanation: The gravitational force is proportional to 1/R2, where R is the distance from the centre of the Earth. So at a height of 2R from the centre of the earth, the corresponding weight would be one-fourth of the original weight.

: In the United States, distilled beverages are designated with a "proof number," which is _____ the percentage of the alcohol content. a. half b. one fourth c. twice d. 4 times

Description : : In the United States, distilled beverages are designated with a "proof number," which is _____ the percentage of the alcohol content. a. half b. one fourth c. twice d. 4 times

Last Answer : c. twice

Two negative point charges are 2 meters apart and repel each other with a force of 2 newtons. When the distance between the charges is doubled, the force between them is w) one fourth as great x) one half as great y) twice as great z) four times as great

Description : Two negative point charges are 2 meters apart and repel each other with a force of 2 newtons. When the distance between the charges is doubled, the force between them is w) one fourth as great x) one half as great y) twice as great z) four times as great

Last Answer : ANSWER: W -- ONE FOURTH AS GREAT

If the distance between the earth and moon were halved, the force of the attraction between them would be: w) one fourth as great x) one half as great y) twice as great z) four times as great

Description : If the distance between the earth and moon were halved, the force of the attraction between them would be: w) one fourth as great x) one half as great y) twice as great z) four times as great 

Last Answer : ANSWER: Z -- FOUR TIMES AS GREAT

In a short cylindrical external mouthpiece, the vena contracta occurs at a distance __________ the diameter of the orifice from the outlet of orifice. (A) Equal to (B) One-fourth (C) One-third (D) One-half

Description : In a short cylindrical external mouthpiece, the vena contracta occurs at a distance __________ the diameter of the orifice from the outlet of orifice. (A) Equal to (B) One-fourth (C) One-third (D) One-half

Last Answer : Answer: Option B

The power transmitted through the pipe is maximum when the head lost due to friction is equal to (A) One-fourth of the total supply head (B) One-third of the total supply head (C) One-half of the total supply head (D) Two-third of the total supply head

Description : The power transmitted through the pipe is maximum when the head lost due to friction is equal to (A) One-fourth of the total supply head (B) One-third of the total supply head (C) One-half of the total supply head (D) Two-third of the total supply head

Last Answer : Answer: Option B

The discharge through a convergent mouthpiece is __________ the discharge through an internal mouthpiece of the same diameter and head of water. (A) Equal to (B) One-half (C) Three fourth (D) Double

Description : The discharge through a convergent mouthpiece is __________ the discharge through an internal mouthpiece of the same diameter and head of water. (A) Equal to (B) One-half (C) Three fourth (D) Double

Last Answer : Answer: Option D

The breadth of rib in a T-beam should at least be equal to __________the depth of rib (a) One –half (b) One –third (c) One-fourth (d) One –sixth

Description : The breadth of rib in a T-beam should at least be equal to __________the depth of rib (a) One –half (b) One –third (c) One-fourth (d) One –sixth

Last Answer : (b) One –third

A weir is said to be broad crested weir, if the width of the crest of the weir is ________ half the height of water above the weir crest. (A) Equal to (B) Less than (C) More than (D) None of these

Description : A weir is said to be broad crested weir, if the width of the crest of the weir is ________ half the height of water above the weir crest. (A) Equal to (B) Less than (C) More than (D) None of these

Last Answer : Answer: Option C

A weir is said to be narrow-crested weir, if the width of the crest of the weir is __________ half the height of water above the weir crest. (A) Equal to (B) Less than (C) More than (D) None of these

Description : A weir is said to be narrow-crested weir, if the width of the crest of the weir is __________ half the height of water above the weir crest. (A) Equal to (B) Less than (C) More than (D) None of these

Last Answer : Answer: Option B

The weaving length of a roadway is the distance (A) Between the channelizing islands (B) Equal to half circumference (C) Equal to total width of adjoining radial roads (D) Equal to diameter of rotary

Description : The weaving length of a roadway is the distance (A) Between the channelizing islands (B) Equal to half circumference (C) Equal to total width of adjoining radial roads (D) Equal to diameter of rotary

Last Answer : Answer: Option A

The portion of the brick without a triangular corner equal to half the width and half the length, is called (A) Closer (B) Queen closer (C) King closer (D) Squint brick

Description : The portion of the brick without a triangular corner equal to half the width and half the length, is called (A) Closer (B) Queen closer (C) King closer (D) Squint brick

Last Answer : Answer: Option C

The piece of a brick cut along the centre of width in such a way that its length is equal to that of full brick, is called (A) Half brick (B) Queen closer (C) King closer (D) Bevelled closer

Description : The piece of a brick cut along the centre of width in such a way that its length is equal to that of full brick, is called (A) Half brick (B) Queen closer (C) King closer (D) Bevelled closer

Last Answer : Answer: Option B

Pick up the correct statement from the following: (A) The apparent error on reversal is twice the actual error (B) The correction may be made equal to half the observed discrepancy (C) The good results may be obtained from a defective instrument by reversing and taking the mean of two erroneous results (D) All the above

Description : Pick up the correct statement from the following: (A) The apparent error on reversal is twice the actual error (B) The correction may be made equal to half the observed discrepancy (C) The ... a defective instrument by reversing and taking the mean of two erroneous results (D) All the above

Last Answer : (D) All the above

The most economical section of a rectangular channel is one which has hydraulic mean depth or hydraulic radius equal to (A) Half the depth (B) Half the breadth (C) Twice the depth (D) Twice the breadth

Description : The most economical section of a rectangular channel is one which has hydraulic mean depth or hydraulic radius equal to (A) Half the depth (B) Half the breadth (C) Twice the depth (D) Twice the breadth

Last Answer : Answer: Option A

A journal bearing with hydrodynamic lubrication is running steadily with a certain amount of minimum film thickness. When the load and speed are doubled, how does the minimum film thickness vary? [IES-2008] (a) Remains unchanged (b) Gets doubled (c) Gets reduced to one-fourth of original value (d) Gets reduced to half of original value

Description : A journal bearing with hydrodynamic lubrication is running steadily with a certain amount of minimum film thickness. When the load and speed are doubled, how does the minimum film thickness vary? [IES-2008 ... Gets reduced to one-fourth of original value (d) Gets reduced to half of original value

Last Answer : (a) Remains unchanged

In general, the depth of slab should be ---------------- the minimum depth required for balanced section. [ A ] Equal to [ B ] Less than [ C ] Greater than [ D ] Half of

Description : In general, the depth of slab should be ---------------- the minimum depth required for balanced section. [ A ] Equal to [ B ] Less than [ C ] Greater than [ D ] Half of

Last Answer : [ C ] Greater than

Which of the following statement is correct (a) The maximum size of coarse aggregate should not exceed one fourth of the minimum dimension of the plain concrete member. (b) The maximum size of coarse aggregate should not exceed one fifty of the minimum dimension of the reinforced concrete member (c)The aggregates of 40mm, 20mm and 10mm sizes are commonly used for concrete works (d) All the above

Description : Which of the following statement is correct (a) The maximum size of coarse aggregate should not exceed one fourth of the minimum dimension of the plain concrete member. (b) The maximum size of coarse ... aggregates of 40mm, 20mm and 10mm sizes are commonly used for concrete works (d) All the above

Last Answer : (d) All the above

The minimum width of the pavement of a National Highway should be (A) 4.7 m (B) 5.7 m (C) 6.7 m (D) 7.7 m

Description : The minimum width of the pavement of a National Highway should be (A) 4.7 m (B) 5.7 m (C) 6.7 m (D) 7.7 m

Last Answer : Answer: Option B

On the recommendations of Nagpur Conference, the minimum width of a village road may be (A) 2.45 m (B) 2.75 m (C) 3.66 m (D) 4.90 m

Description : On the recommendations of Nagpur Conference, the minimum width of a village road may be (A) 2.45 m (B) 2.75 m (C) 3.66 m (D) 4.90 m

Last Answer : Answer: Option A

The minimum road width is taken (A) 9 m (B) 12 m (C) 16 m (D) 20 m

Description : The minimum road width is taken (A) 9 m (B) 12 m (C) 16 m (D) 20 m

Last Answer : Answer: Option A

Length of vehicles does not affect (A) Extra widening (B) Minimum radius of turning (C) Passing sight distance (D) Width of shoulders

Description : Length of vehicles does not affect (A) Extra widening (B) Minimum radius of turning (C) Passing sight distance (D) Width of shoulders

Last Answer : Answer: Option D

Pick up the correct statement from the following: (A) Minimum desirable width of medians on rural highways is 5 metres (B) Minimum width of medians should be 3 metres (C) On long bridges and viaducts, the width of medians should be 1.5 m (D) All the above

Description : Pick up the correct statement from the following: (A) Minimum desirable width of medians on rural highways is 5 metres (B) Minimum width of medians should be 3 metres (C) On long bridges and viaducts, the width of medians should be 1.5 m (D) All the above

Last Answer : Answer: Option D

The minimum width of a septic tank is taken (A) 70 cm (B) 75 cm (C) 80 cm (D) 90 c

Description : The minimum width of a septic tank is taken (A) 70 cm (B) 75 cm (C) 80 cm (D) 90 c

Last Answer : (B) 75 cm

Minimum width of ship clearance shall be (A) B or 30 m (B) 1.5 B or 50 m (C) 1.5 B (D) 50 m

Description : Minimum width of ship clearance shall be (A) B or 30 m (B) 1.5 B or 50 m (C) 1.5 B (D) 50 m

Last Answer : (A) B or 30 m

The minimum width of a stair in residential buildings, is (A) 55 cm (B) 70 cm (C) 85 cm (D) 100 cm

Description : The minimum width of a stair in residential buildings, is (A) 55 cm (B) 70 cm (C) 85 cm (D) 100 cm

Last Answer : Answer: Option C

Where a medium category aeroplane is landing behind a heavy category aeroplane, the minimum separation distance in NM is: a. 3 b. 4 c. 5 d. 6

Description : Where a medium category aeroplane is landing behind a heavy category aeroplane, the minimum separation distance in NM is: a. 3 b. 4 c. 5 d. 6

Last Answer : c. 5

Where a light category aeroplane is landing behind a medium category aeroplane, minimum separation distance in NM is: a. 6 b. 5 c. 4 d. 3

Description : Where a light category aeroplane is landing behind a medium category aeroplane, minimum separation distance in NM is: a. 6 b. 5 c. 4 d. 3

Last Answer : b. 5

What is the minimum height an access ladder must extend above the landing?

Description : What is the minimum height an access ladder must extend above the landing?

Last Answer : 1m

To ascertain the maximum permissible eccentricity of loads on circular columns, the rule generally followed, is (A) Middle half rule of columns (B) Middle third rule of columns (C) Middle fourth rule of columns (D) None of these

Description : To ascertain the maximum permissible eccentricity of loads on circular columns, the rule generally followed, is (A) Middle half rule of columns (B) Middle third rule of columns (C) Middle fourth rule of columns (D) None of these

Last Answer : (C) Middle fourth rule of columns

The range within which a load can be applied on a rectangular column, to avoid any tensile stress, is (A) One-half of the base (B) One-fifth of the base (C) One-fourth of the base (D) One-fifth of the base

Description : The range within which a load can be applied on a rectangular column, to avoid any tensile stress,  is  (A) One-half of the base  (B) One-fifth of the base  (C) One-fourth of the base  (D) One-fifth of the base 

Last Answer : (B) One-fifth of the base 

Center of gravity of a solid cone lies on the axis at the height (A) One-fourth of the total height above base (B) One-third of the total height above base (C) One-half of the total height above base (D) Three-eighth of the total height above the base

Description : Center of gravity of a solid cone lies on the axis at the height (A) One-fourth of the total height above base (B) One-third of the total height above base (C) One-half of the total height above base (D) Three-eighth of the total height above the base

Last Answer : (A) One-fourth of the total height above base

Center of gravity of a thin hollow cone lies on the axis at a height of (A) One-fourth of the total height above base (B) One-third of the total height above base (C) One-half of the total height above base (D) Three-eighth of the total height above the base

Description : Center of gravity of a thin hollow cone lies on the axis at a height of (A) One-fourth of the total height above base (B) One-third of the total height above base (C) One-half of the total height above base (D) Three-eighth of the total height above the base

Last Answer : (B) One-third of the total height above base

Top bars are extended to the projecting parts of the combined footing of two columns Ldistance apart for a distance of (A) 0.1 L from the outer edge of column (B) 0.1 L from the centre edge of column (C) Half the distance of projection (D) One-fourth the distance of projection

Description : Top bars are extended to the projecting parts of the combined footing of two columns Ldistance apart for a distance of (A) 0.1 L from the outer edge of column (B) 0.1 L from the centre edge of column (C) Half the distance of projection (D) One-fourth the distance of projection

Last Answer : Answer: Option B