What is the minimum height an access ladder must extend above the landing?

What is the minimum height an access ladder must extend above the landing?
by

1 Answer

Answer :

1m
by

Related questions

What is the maximum height allowed between ladder landings?

Description : What is the maximum height allowed between ladder landings?

Last Answer : 6m (or 3 lifts)

The height of a toe board must be at least? a. 100mm (4 inches) b. 200mm (8 inches) c. 150mm (6 inches) d. 230mm (9 inches)

Description : The height of a toe board must be at least? a. 100mm (4 inches) b. 200mm (8 inches) c. 150mm (6 inches) d. 230mm (9 inches)

Last Answer : c. 150mm (6 inches)

At what height must top rails be fitted above working platform? a. Between 90 cm (35 inches) and 110 cm (43 inches) b. Between 100 cm (39 inches) and 120 cm (47 inches) c. Between 95 cm (38 inches) and 115 cm ( 45 inches) d. Between 105 cm (41 inches)and 125 cm (49 inches)

Description : At what height must top rails be fitted above working platform? a. Between 90 cm (35 inches) and 110 cm (43 inches) b. Between 100 cm (39 inches) and 120 cm (47 inches) c. Between 95 cm (38 inches) and 115 cm ( 45 inches) d. Between 105 cm (41 inches)and 125 cm (49 inches)

Last Answer : c. Between 95 cm (38 inches) and 115 cm ( 45 inches)

Where must longitudinal (façade) bracing be installed on a length whose is greater than its height? a. Every Third post b. Every post c. Every Fifth post d. Every Second post

Description : Where must longitudinal (façade) bracing be installed on a length whose is greater than its height? a. Every Third post b. Every post c. Every Fifth post d. Every Second post

Last Answer : c. Every Fifth post

Planks must be overlapped a minimum of ------

Description : Planks must be overlapped a minimum of ------

Last Answer : 12 inches.

What is the height of the base lift (kicker lift) on a typical tube and coupler scaffold? a. 225mm (9 inches) b. 300mm (12 inches) c. 150mm (6 inches) d. 100mm (4 inches)

Description : What is the height of the base lift (kicker lift) on a typical tube and coupler scaffold? a. 225mm (9 inches) b. 300mm (12 inches) c. 150mm (6 inches) d. 100mm (4 inches)

Last Answer : c. 150mm (6 inches

What is the minimum overlap required when splicing bracing? a. 300mm (12 inches) b. 400mm (16 inches) c. 600mm (24 inches) d. 450mm (18 inches)

Description : What is the minimum overlap required when splicing bracing? a. 300mm (12 inches) b. 400mm (16 inches) c. 600mm (24 inches) d. 450mm (18 inches)

Last Answer : a. 300mm (12 inches)

What minimum width of timber would you use as a soleplate?

Description : What minimum width of timber would you use as a soleplate?

Last Answer : 220mm (or 225mm, or the width of a scaffold plank)

What is the minimum size of a square baseplate?

Description : What is the minimum size of a square baseplate?

Last Answer : 150mm x 150mm (or 225cm2)

The travel distance to an exit point on a working platform must be no more than? a. 7.4m b. 45m c. 15m d. 60m

Description : The travel distance to an exit point on a working platform must be no more than? a. 7.4m b. 45m c. 15m d. 60m

Last Answer : c. 15m

The width of a scaffold platform or walkways must be at least? a. 3 planks 675mm (27 inches) b. 2 planks 450mm (18 inches) c. 5 planks 1,125mm (45 inches) d. 4 planks 900mm (30 inches)

Description : The width of a scaffold platform or walkways must be at least? a. 3 planks 675mm (27 inches) b. 2 planks 450mm (18 inches) c. 5 planks 1,125mm (45 inches) d. 4 planks 900mm (30 inches)

Last Answer : a. 3 planks 675mm (27 inches)

A guardrail system must be fitted if the distance between a working platform a wall is more than? a. 100mm (4 inches) b. 360mm (14 inches) c. 200mm (8 inches) d. 460mm (18 inches)

Description : A guardrail system must be fitted if the distance between a working platform a wall is more than? a. 100mm (4 inches) b. 360mm (14 inches) c. 200mm (8 inches) d. 460mm (18 inches)

Last Answer : b. 360mm (14 inches)

The vertical spacing between ties must be no more than? a. 8m (26 feet) b. 10m (33 feet) c. 12m (39 feet) d. 6m (20 feet)

Description : The vertical spacing between ties must be no more than? a. 8m (26 feet) b. 10m (33 feet) c. 12m (39 feet) d. 6m (20 feet)

Last Answer : a. 8m (26 feet)

The headroom above a working platform must be at least? a. 1.6m b. 2.1m c. 2m d. 2.6m

Description : The headroom above a working platform must be at least? a. 1.6m b. 2.1m c. 2m d. 2.6m

Last Answer : c. 2m

The gap between scaffold planks (boards) must be no more than? a. 150mm (6 inches) b. 50mm (2 inches) c. 75mm (3 inches) d. 25mm (1 inch)

Description : The gap between scaffold planks (boards) must be no more than? a. 150mm (6 inches) b. 50mm (2 inches) c. 75mm (3 inches) d. 25mm (1 inch)

Last Answer : d. 25mm (1 inch)

At what angle must zig zag bracing be installed? a. 35-55 degree b. 35-60 degree c. 25-45 degree d. 35-70 degree

Description : At what angle must zig zag bracing be installed? a. 35-55 degree b. 35-60 degree c. 25-45 degree d. 35-70 degree

Last Answer : a. 35-55 degree

The vertical distance clearance between the bottoms of the toe board? a. 0mm (0 inch) b. 6mm ( ¼ inch) c. 3mm ( 1/8 inch)

Description : The vertical distance clearance between the bottoms of the toe board? a. 0mm (0 inch) b. 6mm ( ¼ inch) c. 3mm ( 1/8 inch)

Last Answer : b. 6mm ( ¼ inch)

hat is the horizontal spacing between tie? a. No more than 5m (16 feet) b. No more than 9m (30 feet) c. No more than 7m (23 feet) d. No more than 38m (125 feet)

Description : hat is the horizontal spacing between tie? a. No more than 5m (16 feet) b. No more than 9m (30 feet) c. No more than 7m (23 feet) d. No more than 38m (125 feet)

Last Answer : b. No more than 9m (30 feet)

Screw jack can be adjusted no more than? a. 300mm (12 inches) of threaded length showing b. 2/3 of the total threaded length showing c. 150mm (6 inches) of threaded length showing d. 1/3 of the total threaded length showing

Description : Screw jack can be adjusted no more than? a. 300mm (12 inches) of threaded length showing b. 2/3 of the total threaded length showing c. 150mm (6 inches) of threaded length showing d. 1/3 of the total threaded length showing

Last Answer : b. 2/3 of the total threaded length showing

What is the main function of bracing? a. To correct any incorrect measurements b. To enable easy inspection of the scaffold c. To make the scaffold square d. To add rigidity to the scaffold

Description : What is the main function of bracing? a. To correct any incorrect measurements b. To enable easy inspection of the scaffold c. To make the scaffold square d. To add rigidity to the scaffold

Last Answer : d. To add rigidity to the scaffold

What maximum load would you place on a right angle coupler?

Description : What maximum load would you place on a right angle coupler?

Last Answer : 630kg (or 630kgf or 6.25kN)

What is the maximum load you would lift with a gin wheel?

Description : What is the maximum load you would lift with a gin wheel?

Last Answer : 50kg

What is the maximum distance that bracing can be installed from a node point on a scaffold? a. 200mm (8 inches) b. 300mm (12 inches) c. 150mm (6 inches) d. 250mm (10 inches)

Description : What is the maximum distance that bracing can be installed from a node point on a scaffold? a. 200mm (8 inches) b. 300mm (12 inches) c. 150mm (6 inches) d. 250mm (10 inches)

Last Answer : b. 300mm (12 inches)

What is the maximum number of open bays if transverse zig zag bracing is installed along the width of a birdcage scaffold? a. Four b. Three c. Five d. Six

Description : What is the maximum number of open bays if transverse zig zag bracing is installed along the width of a birdcage scaffold? a. Four b. Three c. Five d. Six

Last Answer : b. Three

What is the main function of bracing? a. To correct any incorrect measurements b. To enable easy inspection of the scaffold c. To make the scaffold square d. To add rigidity to the scaffold

Description : What is the main function of bracing? a. To correct any incorrect measurements b. To enable easy inspection of the scaffold c. To make the scaffold square d. To add rigidity to the scaffold

Last Answer : d. To add rigidity to the scaffold

How should you access a roof using a articulated ladder?

Description : How should you access a roof using a articulated ladder?

Last Answer : rrr

What are the requirements in placing an access ladder on a scaffold?

Description : What are the requirements in placing an access ladder on a scaffold?

Last Answer : Provide access when scaffold platforms are more than 2 feet above or below a point of access When using ladders, bottom rung must not be more than 24 inches high. Ladder to be at the correct (i ... The ladders should be free from damage and should be colour coded. All access ladders must be tagged.

A 5 m ladder of mass 25 kg is placed in a position where its inclination to a vertical wall is at 30?. A 100 kg man is to climb the ladder. If the coefficient of static friction is 0.25 the height along ladder at which the slipping will be induced would be a.2.4 m b.1.6 m c.0.8 m d.1.2 m e.0.5 m

Description : A 5 m ladder of mass 25 kg is placed in a position where its inclination to a vertical wall is at 30?. A 100 kg man is to climb the ladder. If the coefficient of static friction is 0.25 the height along ladder at which the slipping will be induced would be a.2.4 m b.1.6 m c.0.8 m d.1.2 m e.0.5 m

Last Answer : c. 0.8 m

TACAN is a navigational aid providing ___________. A. bearing and distance indication B. speed and height indication C. bearing and weather information D. instrument-landing glide paths

Description : TACAN is a navigational aid providing ___________. A. bearing and distance indication B. speed and height indication C. bearing and weather information D. instrument-landing glide paths

Last Answer : A. bearing and distance indication

ECE Board Exam March 1996 TACAN is a navigational aid providing ___________. A. bearing and distance indication B. speed and height indication C. bearing and weather information D. instrument-landing glide paths

Description : ECE Board Exam March 1996 TACAN is a navigational aid providing ___________. A. bearing and distance indication B. speed and height indication C. bearing and weather information D. instrument-landing glide paths

Last Answer : A. bearing and distance indication

What type of autoland system would be required for the landing to continue following a single failure below alert height? a. Fail soft b. Fail passive c. Fail operational or fail active d. Land 2 system

Description : What type of autoland system would be required for the landing to continue following a single failure below alert height? a. Fail soft b. Fail passive c. Fail operational or fail active d. Land 2 system

Last Answer : c. Fail operational or fail active

What type of autoland system would be required for the landing to continue following a single failure below alert height? a. Fail soft b. Fail passive c. Fail operational or fail active d. Land 2 system

Description : What type of autoland system would be required for the landing to continue following a single failure below alert height? a. Fail soft b. Fail passive c. Fail operational or fail active d. Land 2 system

Last Answer : D. All of the above

The number of disk pages access in B-tree search, where h is height, n is the number of keys, and t is the minimum degree, is: (A) θ(logn h*t) (B) θ(logt n*h) (C) θ(logh n) (D) θ(logt n)

Description : The number of disk pages access in B-tree search, where h is height, n is the number of keys, and t is the minimum degree, is: (A) θ(logn h*t) (B) θ(logt n*h) (C) θ(logh n) (D) θ(logt n)

Last Answer : Answer: D

________ Mobile Lite illustrates an important trend in software to extend its products as cloud services for mobile access. A. Google.com B. aol.com C. Salesforce.com D. Oracle.com

Description : ________ Mobile Lite illustrates an important trend in software to extend its products as cloud services for mobile access. A. Google.com B. aol.com C. Salesforce.com D. Oracle.com

Last Answer : Salesforce.com

Minimum width of landing should be (A) Equal to width of stairs (B) Half the width of stairs (C) Twice the width of stairs (D) One fourth the width of stairs

Description : Minimum width of landing should be (A) Equal to width of stairs (B) Half the width of stairs (C) Twice the width of stairs (D) One fourth the width of stairs

Last Answer : Answer: Option A

Where a medium category aeroplane is landing behind a heavy category aeroplane, the minimum separation distance in NM is: a. 3 b. 4 c. 5 d. 6

Description : Where a medium category aeroplane is landing behind a heavy category aeroplane, the minimum separation distance in NM is: a. 3 b. 4 c. 5 d. 6

Last Answer : c. 5

Where a light category aeroplane is landing behind a medium category aeroplane, minimum separation distance in NM is: a. 6 b. 5 c. 4 d. 3

Description : Where a light category aeroplane is landing behind a medium category aeroplane, minimum separation distance in NM is: a. 6 b. 5 c. 4 d. 3

Last Answer : b. 5

If a landing is to be made without flaps, the landing speed must be: a. reduced b. increased c. the same as for landing with flaps d. the same as for landing with flaps but with a steeper approach

Description : If a landing is to be made without flaps, the landing speed must be: a. reduced b. increased c. the same as for landing with flaps d. the same as for landing with flaps but with a steeper approach

Last Answer : b. increased

To act as co-pilot for take-off or landing, you must have: a. Acted as PIC or co-pilot on type in the last 90 days b. Acted as PIC or co-pilot on type in the last 30 days c. Acted as PIC or co-pilot on type in the last 60 days d. Been at the controls for landing in the same type recently

Description : To act as co-pilot for take-off or landing, you must have: a. Acted as PIC or co-pilot on type in the last 90 days b. Acted as PIC or co-pilot on type in the last 30 days c. Acted as PIC or co-pilot on type in the last 60 days d. Been at the controls for landing in the same type recently

Last Answer : a. Acted as PIC or co-pilot on type in the last 90 days

For valid throw shot must fall. (a) In sector area (b) Within the inner edges of landing sector (c) Nearest on sector lines. (d) None of these.

Description : For valid throw shot must fall. (a) In sector area (b) Within the inner edges of landing sector (c) Nearest on sector lines. (d) None of these.

Last Answer : (a) In sector area

Which one of the following statements is true regarding <key,value> pairs of a MapReduce job? a)A key class must implement Writable. b)A key class must implement WritableComparable. c)A value class must implement WritableComparable. d)A value class must extend WritableComparable.

Description : Which one of the following statements is true regarding pairs of a MapReduce job? a)A key class must implement Writable. b)A key class must implement WritableComparable. c)A value class must implement WritableComparable. d)A value class must extend WritableComparable.

Last Answer : A key class must implement WritableComparable.

When is having a borrowed ladder from the movie GATTACA legit or ethical?

Description : When is having a borrowed ladder from the movie GATTACA legit or ethical?

Last Answer : Love that movie.

Do you sometimes feel you're playing game of "snake and ladder" in real life?

Description : Do you sometimes feel you're playing game of "snake and ladder" in real life?

Last Answer : I sleep until it goes away. Having money helps. I run my life like a game and try to make a profit from sure bets.

Do you feel more comfortable on a self supporting, "A" frame type of tall ladder, or one that leans against a tree, or house, for support?

Description : Do you feel more comfortable on a self supporting, "A" frame type of tall ladder, or one that leans against a tree, or house, for support?

Last Answer : With regular ladders I always fear that the base will slide backwards. On the other hand, A-type ladders seem awfully wobbly and prone to tipping over. I prefer permanently affixed ladders.

[Fluff time] You fall off a 12ft ladder which peril would be best to fall on or in?

Description : [Fluff time] You fall off a 12ft ladder which peril would be best to fall on or in?

Last Answer : Fire ant mound. The much lesser of all the other evils like impalement on the spiked gate,cut to ribbons on the glass table, the agony of having to have thorns and cactus needles extracted. Hit the fire ant mound and hopefully be able to sprint away fast.

Can anyone recommend a good book for Women Climbing the Corporate Ladder?

Description : Can anyone recommend a good book for Women Climbing the Corporate Ladder?

Last Answer : answer:When I was training to be CNO, my current CNO recommended First break all the rules and Now discover your strengths . She also recommended getting the Journal of Nursing Administration. Personally, ... to spend time with her in that role was better than any book I've read about management.

Does anybody know an easy way to draw your own electrical/electronic diagrams in ladder or schematic drawings on your computer?

Description : Does anybody know an easy way to draw your own electrical/electronic diagrams in ladder or schematic drawings on your computer?

Last Answer : here is some software that claims to allow you to draw your own circuits, it also claims to be free. however as i have never used it my self i cant say for sure.

Is the first a in Nevada pronounced like ladder or larder?

Description : Is the first a in Nevada pronounced like ladder or larder?

Last Answer : Like ladder.

Do you enjoy watching house flippers fail miserably on shows like Property Ladder?

Description : Do you enjoy watching house flippers fail miserably on shows like Property Ladder?

Last Answer : I watched Flip That House once, and this really annoying lady was on it. She was constantly complaining and she had no idea what she was doing. By the end of the show she still hadn’t sold the house; I couldn’t help but feel kind of happy. lurve for schadenfreude

What are the five stages in the Ladder of Problem Solving from "Thinking through Problem Solving"?

Description : What are the five stages in the Ladder of Problem Solving from "Thinking through Problem Solving"?

Last Answer : answer:http://www.changethis.com/21.ThinkingThrough The five stages: detection, inclination, capability, inquiry, skilled-response, and directed response. I know that's six. Maybe you only use one or the other of the last two?