Negative skin friction (A) Is a downward drag acting on a pile due to downward movement of the surrounding compressible soil relative to the pile (B) Develops due to lowering of ground water (C) Both (a) and (b) (D) Neither (a) not (b)

Negative skin friction
(A) Is a downward drag acting on a pile due to downward movement of the surrounding
compressible soil relative to the pile
(B) Develops due to lowering of ground water
(C) Both (a) and (b)
(D) Neither (a) not (b)
by

1 Answer

Answer :

Answer: Option C
by

Related questions

Negative skin friction on piles (A) Is caused due to relative settlement of the soil (B) Is caused in soft clays (C) Decreases the pile capacity (D) All of the above

Description : Negative skin friction on piles (A) Is caused due to relative settlement of the soil (B) Is caused in soft clays (C) Decreases the pile capacity (D) All of the above

Last Answer : Answer: Option D

Pick up the correct statement from the following: (A) A pile is a slender member which transfers the load through its lower end on a strong strata (B) A pile is a slender member which transfers its load to the surrounding soil (C) A pile is a slender member which transfers its load by friction (D) A pile is a cylindrical body of concrete which transfers the load at a depth greater than its width

Description : Pick up the correct statement from the following: (A) A pile is a slender member which transfers the load through its lower end on a strong strata (B) A pile is a slender member which ... A pile is a cylindrical body of concrete which transfers the load at a depth greater than its width

Last Answer : Answer: Option B

Pick up the incorrect statement from the following: (A) The width of the wall is constructed thicker at the base in a stepped fashion (B) A long vertical load transferring concrete structure is called a concrete pile (C) In pile which transfers the load to the soil by the friction between the pile and the surrounding soil is called friction pile (D) The pile which transfers the load to a hard rock bed at certain depth is called load bearing

Description : Pick up the incorrect statement from the following: (A) The width of the wall is constructed thicker at the base in a stepped fashion (B) A long vertical load transferring concrete structure is ... ) The pile which transfers the load to a hard rock bed at certain depth is called load bearing

Last Answer : Answer: Option D

The pile which supports the load due to friction between pile face and surrounding soil, is generally known as (A) Bearing pile (B) Friction pile (C) Sheet pile (D) Battered pile

Description : The pile which supports the load due to friction between pile face and surrounding soil, is generally known as (A) Bearing pile (B) Friction pile (C) Sheet pile (D) Battered pile

Last Answer : Option B

Pile foundation is generally provided if soil is (A) Compressible (B) Water logged (C) Made up (D) All the above

Description : Pile foundation is generally provided if soil is (A) Compressible (B) Water logged (C) Made up (D) All the above

Last Answer : Answer: Option D

Fanning friction factor equation applies to the __________ fluid flow. (A) Non-isothermal condition of (B) Compressible (C) Both (A) and (B) (D) Neither (A) nor (B)

Description : Fanning friction factor equation applies to the __________ fluid flow. (A) Non-isothermal condition of (B) Compressible (C) Both (A) and (B) (D) Neither (A) nor (B)

Last Answer : (D) Neither (A) nor (B)

Pick up the correct statement from the following: (A) The rise of the ground surface due to frost action is called frost heave (B) The freezing of water is accompanied by a volume increase of 9% (C) Below freezing point, higher soil suction develops (D) All the above

Description : Pick up the correct statement from the following: (A) The rise of the ground surface due to frost action is called frost heave (B) The freezing of water is accompanied by a volume increase of 9% (C) Below freezing point, higher soil suction develops (D) All the above

Last Answer : (D) All the above

Pick out the wrong statement. (A) The shear stress at the pipe (dia = D, length = L) wall in case of laminar flow of Newtonian fluids is (D/4L). ∆p (B) In the equation, T. gc = k. (du/dy) n the value of 'n' for pseudoplastic and Dilatant fluid are < 1 and >1 respectively (C) Shear stress for Newtonian fluid is proportional to the rate of shear in the direction perpendicular to motion (D) With increase in the Mach number >0.6, the drag co-efficient decreases in case of compressible fluids

Description : Pick out the wrong statement. (A) The shear stress at the pipe (dia = D, length = L) wall in case of laminar flow of Newtonian fluids is (D/4L). ∆p (B) In the equation, T. gc = k. ... to motion (D) With increase in the Mach number >0.6, the drag co-efficient decreases in case of compressible fluids

Last Answer : (D) With increase in the Mach number >0.6, the drag co-efficient decreases in case of compressible fluids

Buoyant force is (A) Resultant force acting on a floating body (B) Equal to the volume of liquid displaced (C) Force necessary to keep a body in equilibrium (D) The resultant force on a body due to the fluid surrounding it

Description : Buoyant force is (A) Resultant force acting on a floating body (B) Equal to the volume of liquid displaced (C) Force necessary to keep a body in equilibrium (D) The resultant force on a body due to the fluid surrounding it

Last Answer : Answer: Option D

Buoyant force is (A) The resultant force acting on a floating body (B) The resultant force on a body due to the fluid surrounding it (C) Equal to the volume of liquid displaced (D) The force necessary to maintain equilibrium of a submerged body

Description : Buoyant force is (A) The resultant force acting on a floating body (B) The resultant force on a body due to the fluid surrounding it (C) Equal to the volume of liquid displaced (D) The force necessary to maintain equilibrium of a submerged body

Last Answer : Answer: Option B

. In case of turbulent flow of fluid through a circular pipe, the (A) Mean flow velocity is about 0.5 times the maximum velocity (B) Velocity profile becomes flatter and flatter with increasing Reynolds number (C) Point of maximum instability exists at a distance of 2r/3 from the pipe wall (r = pipe radius) (D) Skin friction drag, shear stresses, random orientation of fluid particles and slope of velocity profile at the wall are more

Description : . In case of turbulent flow of fluid through a circular pipe, the (A) Mean flow velocity is about 0.5 times the maximum velocity (B) Velocity profile becomes flatter and flatter with ... , shear stresses, random orientation of fluid particles and slope of velocity profile at the wall are more

Last Answer : (D) Skin friction drag, shear stresses, random orientation of fluid particles and slope of velocity profile at the wall are more

Why are there jets in the midlatitudes in the upper troposphere? (a) Air is warmer in the tropics than the poles, resulting in a poleward pressure gradient that increases with increasing height. (b) Because air near the surface experiences the drag of surface friction, while air in the upper troposphere does not. (c) Due to variations in temperature between continents and ocean. (d) Due to the constant bending by the Coriolis force. (e) Both A and D are correct.

Description : Why are there jets in the midlatitudes in the upper troposphere? (a) Air is warmer in the tropics than the poles, resulting in a poleward pressure gradient that increases with increasing height. (b) Because ... d) Due to the constant bending by the Coriolis force. (e) Both A and D are correct.

Last Answer : (e) Both A and D are correct.

Question No. 205 The pile which supports the load partly by friction and partly by resting on hard stratum, is called (A) Friction pile (B) Bearing pile (C) Friction bearing pile (D) Rough pile

Description : Question No. 205 The pile which supports the load partly by friction and partly by resting on hard stratum, is called (A) Friction pile (B) Bearing pile (C) Friction bearing pile (D) Rough pile

Last Answer : Answer: Option C

The type of pile which is driven at an inclination to resist inclined forces is known as (A) Friction pile (B) Sheet pile (C) Batter pile (D) Anchor pil

Description : The type of pile which is driven at an inclination to resist inclined forces is known as (A) Friction pile (B) Sheet pile (C) Batter pile (D) Anchor pile

Last Answer : Answer: Option C

Consider the following statements: 1. Friction piles are also called floating piles 2. Minimum number of piles to qualify as a pile group is three. 3. The group efficiency of a pile group may be either less than 100% or more than 100%. Which of these statements are correct? (a) 1, 2 & 3 (b) 1 & 2 only (c) 2 & 3 only (d) 1 & 3 only

Description : Consider the following statements: 1. Friction piles are also called floating piles 2. Minimum number of piles to qualify as a pile group is three. 3. The group efficiency of a pile group may be either less than 100% or more than 100%. ... ) 1, 2 & 3 (b) 1 & 2 only (c) 2 & 3 only (d) 1 & 3 only

Last Answer : (a) 1, 2 & 3

The ultimate Settlement of a soil is directly proportional to: (A) Depth of the compressible soil strata (B) Compressive index (C) Both (a) and (b) (D) None of these

Description : The ultimate Settlement of a soil is directly proportional to: (A) Depth of the compressible soil strata (B) Compressive index (C) Both (a) and (b) (D) None of these

Last Answer : (D) None of these

Which one of the following is not the law of dry friction? a.If friction is neglected, the reactions are always normal to the surfaces on contact b.Friction always acts to oppose the relative motion of the free body c.If static friction is acting, the value of the friction force may vary from zero to its maximum value d.The force of friction is always normal to the surface e.All of the above

Description : Which one of the following is not the law of dry friction? a.If friction is neglected, the reactions are always normal to the surfaces on contact b.Friction always acts to oppose the relative motion of ... its maximum value d.The force of friction is always normal to the surface e.All of the above

Last Answer : d. The force of friction is always normal to the surface

Precipitation caused due to upward movement of warmer air as compared to surrounding air, is called (A) Cyclonic precipitation (B) Convective precipitation (C) Orographic precipitation (D) None of these

Description : Precipitation caused due to upward movement of warmer air as compared to surrounding air, is called (A) Cyclonic precipitation (B) Convective precipitation (C) Orographic precipitation (D) None of these

Last Answer : Answer: Option B

Vertical movement of water or downward movement of water from different soil layer is called as

Description : Vertical movement of water or downward movement of water from different soil layer is called as

Last Answer : Ans.Percolation

Downward entry and movement of water in soil surface is — a. Percolation b. Infiltration c. Permeability d. None of these

Description : Downward entry and movement of water in soil surface is — a. Percolation b. Infiltration c. Permeability d. None of these

Last Answer : b. Infiltration

Pick up the incorrect statement from the following: (A) Compaction has no effect on the structure of a soil (B) Permeability decreases with increase in the dry density of a compacted soil (C) A wet side compacted soil is more compressible than a dry side compacted soil (D) Dry side compaction soils swell more when given access to moisture

Description : Pick up the incorrect statement from the following: (A) Compaction has no effect on the structure of a soil (B) Permeability decreases with increase in the dry density of a compacted soil (C) ... a dry side compacted soil (D) Dry side compaction soils swell more when given access to moisture

Last Answer : (A) Compaction has no effect on the structure of a soil

The limiting force of fiction is a.The friction force acting on a body when it is in motion b.The value of friction force which stops the movement of the body c.The value of friction force which cannot exceed under a situation d.The friction force acting when the body is just about to move e.Double of the normal friction

Description : The limiting force of fiction is a.The friction force acting on a body when it is in motion b.The value of friction force which stops the movement of the body c.The value of friction force which ... d.The friction force acting when the body is just about to move e.Double of the normal friction

Last Answer : d. The friction force acting when the body is just about to move

Select the incorrect statement. (A) Effective cohesion of a soil can never have a negative value. (B) Effective angle of internal friction for coarse grained soils is rarely below 30°. (C) Effective angle of internal friction for a soil increases as state of compactness increases. (D) Effective angle of internal friction is a complicated function of mineralogy and clay size content.

Description : Select the incorrect statement. (A) Effective cohesion of a soil can never have a negative value. (B) Effective angle of internal friction for coarse grained soils is rarely below 30°. (C ... (D) Effective angle of internal friction is a complicated function of mineralogy and clay size content.

Last Answer : Answer: Option A

Which among the following is the condition to avoid separation of connected members? a. Force acting on the connected members should be negative b. Force acting on the connected members should be positive c. Force acting on the connected members should be neither positive nor negative d. None of the above

Description : Which among the following is the condition to avoid separation of connected members? a. Force acting on the connected members should be negative b. Force acting on the connected members should be ... acting on the connected members should be neither positive nor negative d. None of the above

Last Answer : a. Force acting on the connected members should be negative

Pick up the correct statement from the following: (A) The water level in a still well, represents the ground water table level (B) The difference between water table level and the water level in a well after pumping, is called depression head (C) The surface of water table surrounding a well during pumping, forms a cone of depression (D) All the above

Description : Pick up the correct statement from the following:  (A) The water level in a still well, represents the ground water table level  (B) The difference between water table level and the water ... water table surrounding a well during pumping, forms a cone of depression  (D) All the above 

Last Answer : (D) All the above 

The pile provided with one or more bulles in its vertical shaft, is generally known as (A) Under-ream pile (B) Friction pile (C) Bearing pile (D) Sheet pile

Description : The pile provided with one or more bulles in its vertical shaft, is generally known as (A) Under-ream pile (B) Friction pile (C) Bearing pile (D) Sheet pile

Last Answer : Option A

Differentiate between ‘End bearing Pile’ and ‘Friction Pile’.

Description : Differentiate between ‘End bearing Pile’ and ‘Friction Pile’.

Last Answer : End bearing pile Friction pile 1) When piles transfer load of the building through a soft soil strata to a suitable bearing stratum at greater depths then it is called a bearing pile. 1) When piles ... It is used to transfer loads through a depth of friction 5)Fig: 5)Fig:

Water is __________ liquid. (A) A compressible (B) An incompressible (C) Both A and B (D) None of these

Description : Water is __________ liquid. (A) A compressible (B) An incompressible (C) Both A and B (D) None of these

Last Answer : Answer: Option B

Which one of the following statements is correct ? a) For water at 100o Celsius at sea level, the vapour pressure is equal to atmospheric pressure b) Surface energy (or tension) is caused by the force of adhesion between liquid molecules c) Viscosity of a fluid is the property exhibited by it both in static and in dynamic conditions d) Air is 50,000 times more compressible than water

Description : Which one of the following statements is correct ? a) For water at 100o Celsius at sea level, the vapour pressure is equal to atmospheric pressure b) Surface energy (or tension) is caused by ... it both in static and in dynamic conditions d) Air is 50,000 times more compressible than water

Last Answer : c) Viscosity of a fluid is the property exhibited by it both in static and in dynamic conditions

Deformation drag, which is caused by widespread deformation of fluid around the immersed body(A) Occurs when NReis very small(B) Is primarily a friction drag(C) Is independent of body length(D) Depends mainly on cross-sectional shape

Description : Deformation drag, which is caused by widespread deformation of fluid around the immersed body (A) Occurs when NRe is very small (B) Is primarily a friction drag (C) Is independent of body length (D) Depends mainly on cross-sectional shape

Last Answer : (A) Occurs when NRe is very small

In which of the following body shapes, the pressure drag is large compared to the friction drag? (A) Stream line body (B) Two dimensional body (C) Bluff body (D) None of these

Description : In which of the following body shapes, the pressure drag is large compared to the friction drag? (A) Stream line body (B) Two dimensional body (C) Bluff body (D) None of these

Last Answer : (C) Bluff body

Coefficient of friction is the (A) Angle between normal reaction and the resultant of normal reaction and the limiting friction (B) Ratio of limiting friction and normal reaction (C) The friction force acting when the body is just about to move (D) The friction force acting when the body is in motion

Description : Coefficient of friction is the  (A) Angle between normal reaction and the resultant of normal reaction and the limiting friction  (B) Ratio of limiting friction and normal reaction  (C) The ... body is just about to move  (D) The friction force acting when the body is in motion 

Last Answer : (B) Ratio of limiting friction and normal reaction

Kinetic friction is the (A) Tangent of angle between normal reaction and the resultant of normal reaction and the limiting friction (B) Ratio of limiting friction and normal reaction (C) The friction force acting when the body is just about to move (D) The friction force acting when the body is in motion

Description : Kinetic friction is the (A) Tangent of angle between normal reaction and the resultant of normal reaction and the limiting friction (B) Ratio of limiting friction and normal reaction (C) The friction force ... body is just about to move (D) The friction force acting when the body is in motion

Last Answer : (D) The friction force acting when the body is in motion

Limiting force of friction is the (A) Tangent of angle between normal reaction and the resultant of normal reaction and limiting friction (B) Ratio of limiting friction and normal reaction(C) The friction force acting when the body is just about to move (D) The friction force acting when the body is in motion

Description : Limiting force of friction is the (A) Tangent of angle between normal reaction and the resultant of normal reaction and limiting friction (B) Ratio of limiting friction and normal reaction (C) The friction ... body is just about to move (D) The friction force acting when the body is in motion

Last Answer : (C) The friction force acting when the body is just about to move

Angle of friction is the (A) Angle between normal reaction and the resultant of normal reaction and the limiting friction (B) Ratio of limiting friction and normal reaction (C) The ratio of minimum friction force to the friction force acting when the body is just about to move (D) The ratio of minimum friction force to friction force acting when the body is in motion

Description : Angle of friction is the (A) Angle between normal reaction and the resultant of normal reaction and the limiting friction (B) Ratio of limiting friction and normal reaction (C) The ratio of minimum ... (D) The ratio of minimum friction force to friction force acting when the body is in motion

Last Answer : (A) Angle between normal reaction and the resultant of normal reaction and the limiting friction

If weight of a falling tennis ball is 1.0 N and drag force acting on it is 0.2 N then resultant force is A. 0.8 N B. 0.5 N C. 1 N D. 2 N

Description : If weight of a falling tennis ball is 1.0 N and drag force acting on it is 0.2 N then resultant force is A. 0.8 N B. 0.5 N C. 1 N D. 2 N

Last Answer :  0.8 N

Drag force acting on a body does not depend upon the (A) Density of the fluid (B) Density of the body (C) Velocity of the body (D) Projected area of the body

Description : Drag force acting on a body does not depend upon the (A) Density of the fluid (B) Density of the body (C) Velocity of the body (D) Projected area of the body

Last Answer : (B) Density of the body

Forces acting on a particle settling in fluid are __________ forces. (A) Gravitational & buoyant (B) Centrifugal & drag (C) Gravitational or centrifugal buoyant drag (D) External, drag & viscous

Description : Forces acting on a particle settling in fluid are __________ forces. (A) Gravitational & buoyant (B) Centrifugal & drag (C) Gravitational or centrifugal buoyant drag (D) External, drag & viscous

Last Answer : (C) Gravitational or centrifugal buoyant drag

Which statement is true regarding the opposing forces acting on an aeroplane in steady-state level flight? a. Thrust is greater than drag and weight and lift are equal b. These forces are equal c. Thrust is greater than drag and lift is greater than weight d. Thrust is slightly greater than lift, but the drag and weight are equal

Description : Which statement is true regarding the opposing forces acting on an aeroplane in steady-state level flight? a. Thrust is greater than drag and weight and lift are equal b. These forces are equal ... greater than weight d. Thrust is slightly greater than lift, but the drag and weight are equal

Last Answer : b. These forces are equal

The amount of steam required per unit quantity of distillate in case of steam distillation will be reduced by (A) Raising the temperature (B) Lowering the total pressure (C) Both (A) and (B) (D) Neither (A) nor (B)

Description : The amount of steam required per unit quantity of distillate in case of steam distillation will be reduced by (A) Raising the temperature (B) Lowering the total pressure (C) Both (A) and (B) (D) Neither (A) nor (B)

Last Answer : (C) Both (A) and (B

In places where the soil is soft and has small resistance to the flow of concrete, which one of the following types of piles, is used (A) Vibro pile (B) Pressure pile (C) Franki pile (D) Pedestal pile

Description : In places where the soil is soft and has small resistance to the flow of concrete, which one of the following types of piles, is used (A) Vibro pile (B) Pressure pile (C) Franki pile (D) Pedestal pile

Last Answer : Answer: Option A

Best type of piles for soft soil having little resistance to the flow of concrete, is (A) Simplex pile (B) Vibro pile (C) Raymond pile (D) Franki pile

Description : Best type of piles for soft soil having little resistance to the flow of concrete, is (A) Simplex pile (B) Vibro pile (C) Raymond pile (D) Franki pile

Last Answer : Answer: Option B

A boy is standing on an elevator which is traveling downward with a constant velocity of 30 meters per second. The boy throws a ball vertically upward with a velocity of 10 meters per second relative to the elevator. What is the velocity of the ball, MAGNITUDE AND DIRECTION, relative to the elevator shaft the instant the boy releases the ball?

Description : A boy is standing on an elevator which is traveling downward with a constant velocity of 30 meters per second. The boy throws a ball vertically upward with a velocity of 10 meters per second ... the ball, MAGNITUDE AND DIRECTION, relative to the elevator shaft the instant the boy releases the ball?

Last Answer : ANSWER: 20 METERS PER SECOND DOWN

Due to shrinkage stresses, a simply supported beam having reinforcement only at bottom tends to (A) Deflect downward (B) Deflect upward (C) Deflect downward or upward (D) None of the above

Description : Due to shrinkage stresses, a simply supported beam having reinforcement only at bottom tends to (A) Deflect downward (B) Deflect upward (C) Deflect downward or upward (D) None of the above

Last Answer : Answer: Option A

The advantage of a concrete pile over a timber pile, is (A) No decay due to termites (B) No restriction on length (C) Higher bearing capacity (D) All the above

Description : The advantage of a concrete pile over a timber pile, is (A) No decay due to termites (B) No restriction on length (C) Higher bearing capacity (D) All the above

Last Answer : Answer: Option D

Coulomb friction is the friction between (A) Bodies having relative motion (B) Two dry surfaces (C) Two lubricated surfaces (D) Solids and liquids

Description : Coulomb friction is the friction between  (A) Bodies having relative motion  (B) Two dry surfaces  (C) Two lubricated surfaces  (D) Solids and liquids 

Last Answer : (A) Bodies having relative motion 

Which statement is true relative to changing angle of attack? a. A decrease in angle of attack will increase pressure below the wing and decrease drag b. An increase in angle of attack will decrease pressure below the wing and decrease drag c. An increase in angle of attack will increase drag d. An increase in angle of attack will decrease the lift coefficient

Description : Which statement is true relative to changing angle of attack? a. A decrease in angle of attack will increase pressure below the wing and decrease drag b. An increase in angle of attack will ... of attack will increase drag d. An increase in angle of attack will decrease the lift coefficient

Last Answer : c. An increase in angle of attack will increase drag