In which of the following body shapes, the pressure drag is large compared to the friction drag? (A) Stream line body (B) Two dimensional body (C) Bluff body (D) None of these

In which of the following body shapes, the pressure drag is large
compared to the friction drag?
(A) Stream line body
(B) Two dimensional body
(C) Bluff body
(D) None of these
by

1 Answer

Answer :

(C) Bluff body
by

Related questions

Which of the following conditions must be satisfied for lift force to be developed? (A) The body should be bluff body (B) The body should be stream lined (C) Circulation around the body is essentially required (D) The main stream velocity must approach the velocity of sound in that fluid medium

Description : Which of the following conditions must be satisfied for lift force to be developed? (A) The body should be bluff body (B) The body should be stream lined (C) Circulation around the body is essentially required (D) The main stream velocity must approach the velocity of sound in that fluid medium

Last Answer : (C) Circulation around the body is essentially required

Two dimensional stream function (A) Relates velocity and pressure (B) Is constant along a stream line (C) Is constant along an equipotential surface (D) None of these

Description : Two dimensional stream function (A) Relates velocity and pressure (B) Is constant along a stream line (C) Is constant along an equipotential surface (D) None of these

Last Answer : (B) Is constant along a stream line

Deformation drag, which is caused by widespread deformation of fluid around the immersed body(A) Occurs when NReis very small(B) Is primarily a friction drag(C) Is independent of body length(D) Depends mainly on cross-sectional shape

Description : Deformation drag, which is caused by widespread deformation of fluid around the immersed body (A) Occurs when NRe is very small (B) Is primarily a friction drag (C) Is independent of body length (D) Depends mainly on cross-sectional shape

Last Answer : (A) Occurs when NRe is very small

A packed tower compared to a plate tower for a particular mass transfer operation (A) Incurs smaller pressure drop (B) Allows installation of cooling coils (C) Is less costly when built in large sizes/diameters (D) Is more suitable, if suspended solids are present in fluid stream

Description : A packed tower compared to a plate tower for a particular mass transfer operation (A) Incurs smaller pressure drop (B) Allows installation of cooling coils (C) Is less costly when built in large sizes/diameters (D) Is more suitable, if suspended solids are present in fluid stream

Last Answer : (A) Incurs smaller pressure drop

Why are there jets in the midlatitudes in the upper troposphere? (a) Air is warmer in the tropics than the poles, resulting in a poleward pressure gradient that increases with increasing height. (b) Because air near the surface experiences the drag of surface friction, while air in the upper troposphere does not. (c) Due to variations in temperature between continents and ocean. (d) Due to the constant bending by the Coriolis force. (e) Both A and D are correct.

Description : Why are there jets in the midlatitudes in the upper troposphere? (a) Air is warmer in the tropics than the poles, resulting in a poleward pressure gradient that increases with increasing height. (b) Because ... d) Due to the constant bending by the Coriolis force. (e) Both A and D are correct.

Last Answer : (e) Both A and D are correct.

. In case of turbulent flow of fluid through a circular pipe, the (A) Mean flow velocity is about 0.5 times the maximum velocity (B) Velocity profile becomes flatter and flatter with increasing Reynolds number (C) Point of maximum instability exists at a distance of 2r/3 from the pipe wall (r = pipe radius) (D) Skin friction drag, shear stresses, random orientation of fluid particles and slope of velocity profile at the wall are more

Description : . In case of turbulent flow of fluid through a circular pipe, the (A) Mean flow velocity is about 0.5 times the maximum velocity (B) Velocity profile becomes flatter and flatter with ... , shear stresses, random orientation of fluid particles and slope of velocity profile at the wall are more

Last Answer : (D) Skin friction drag, shear stresses, random orientation of fluid particles and slope of velocity profile at the wall are more

Negative skin friction (A) Is a downward drag acting on a pile due to downward movement of the surrounding compressible soil relative to the pile (B) Develops due to lowering of ground water (C) Both (a) and (b) (D) Neither (a) not (b)

Description : Negative skin friction (A) Is a downward drag acting on a pile due to downward movement of the surrounding compressible soil relative to the pile (B) Develops due to lowering of ground water (C) Both (a) and (b) (D) Neither (a) not (b)

Last Answer : Answer: Option C

The optimum performance for reactors operating in parallel is obtained when the feed stream is distributed in such a way, that the (A) Space time for each parallel line is same (B) Space time for parallel lines is different (C) Larger reactors have more space time compared to smaller ones (D) None of these

Description : The optimum performance for reactors operating in parallel is obtained when the feed stream is distributed in such a way, that the (A) Space time for each parallel line is same (B) Space time for ... is different (C) Larger reactors have more space time compared to smaller ones (D) None of these

Last Answer : (A) Space time for each parallel line is same

For motion of spherical particles in a stationary fluid, the drag co￾efficient in hindered settling compared to that in free settling is (A) More (B) Less (C) Equal (D) More or less, depending on the type of particle

Description : For motion of spherical particles in a stationary fluid, the drag co￾efficient in hindered settling compared to that in free settling is (A) More (B) Less (C) Equal (D) More or less, depending on the type of particle

Last Answer : (A) More

Thermosetting polymers as compared to thermoplastic polymers (A) Are formed by addition polymerisation (B) Have three dimensional structure (C) Have linear structure (D) None of these

Description : Thermosetting polymers as compared to thermoplastic polymers (A) Are formed by addition polymerisation (B) Have three dimensional structure (C) Have linear structure (D) None of these

Last Answer : (B) Have three dimensional structure

Are you allowed to bluff In Scrabble?

Description : Are you allowed to bluff In Scrabble?

Last Answer : Bluff how?

Paul Ryan is calling the (ugh) Freedom Caucus' bluff. Will they go for it? And will they keep their promises?

Description : Paul Ryan is calling the (ugh) Freedom Caucus' bluff. Will they go for it? And will they keep their promises?

Last Answer : answer:Who knows? It isn’t as if one could apply logic to the thinking of that caucus. Even their chosen name is a misnomer; they want freedom for themselves but no one else. They are anarchists. They cannot be trusted.

When do you bluff or outright lie?

Description : When do you bluff or outright lie?

Last Answer : answer:I don’t lie.* * Note: There is one exception that is borderline because it is not entirely truthful: the santa claus question, which I dealt with on a recent thread. I don’t tell the kids that Santa is real, but I am complicit in some level of playing up the myth.

Did Assad call the president's bluff in Syria?

Description : Did Assad call the president's bluff in Syria?

Last Answer : He learned from Bush that having hard ‘proof’ is the only way to stay safe politically.

What does bluff mean ?

Description : What does bluff mean ?

Last Answer : Bluff means cheating.

What is Bluff city?

Description : What is Bluff city?

Last Answer : Bluff City is acity in eastern Tennessee in Sullivan County, Tennessee. Thepopulation was 1,733 at the 2010 census.

Pressure drag does not depend upon the(A) Roughness of surface of the body (B) Pressure of main flow only (C) Length of the body in flow direction (D) All (A), (B) and (C)

Description : Pressure drag does not depend upon the (A) Roughness of surface of the body (B) Pressure of main flow only (C) Length of the body in flow direction (D) All (A), (B) and (C)

Last Answer : (D) All (A), (B) and (C)

Pick out the wrong statement (A) Low ozone layer thickness in polar regions is due to cold climatic conditions (B) Amount of unburnt hydrocarbons emitted by two stroke petrol engine is more as compared to that emitted by a four stroke engine (C) Carbon monoxide present in the two stroke petrol engine exhaust is much less as compared to that emitted from a four stroke engine (D) Mercury as a pollutant can enter the blood stream & the digestive system/ lungs and is responsible for causing Minamata disease

Description : Pick out the wrong statement (A) Low ozone layer thickness in polar regions is due to cold climatic conditions (B) Amount of unburnt hydrocarbons emitted by two stroke petrol engine is more ... can enter the blood stream & the digestive system/ lungs and is responsible for causing Minamata disease

Last Answer : (D) Mercury as a pollutant can enter the blood stream & the digestive system/ lungs and is responsible for causing Minamata disease

Vena-contracta formed during flow of a liquid through an orificemeter has (A) Minimum liquid cross-section (B) More diameter compared to orifice diameter (C) Minimum velocity of fluid stream (D) None of these

Description : Vena-contracta formed during flow of a liquid through an orificemeter has (A) Minimum liquid cross-section (B) More diameter compared to orifice diameter (C) Minimum velocity of fluid stream (D) None of these

Last Answer : (A) Minimum liquid cross-section

Pick out the wrong statement. (A) For a first order consecutive reaction, a tubular flow reactor as compared to a stirred tank reactor provides higher overall selectivity(B) For an ideal mixed reactor at steady state, the exit stream has the samecomposition as fluid within the reactor and the space time is equivalent toholding time for constant density system(C) Plug flow reactor (PFR) is always smaller than mixed reactor for allpositive reaction orders for a particular duty(D) Reaction rate does not decrease appreciably as the reaction proceeds incase of an autocatalytic reaction

Description : Pick out the wrong statement. (A) For a first order consecutive reaction, a tubular flow reactor as compared to a stirred tank reactor provides higher overall selectivity(B) For an ideal ... D) Reaction rate does not decrease appreciably as the reaction proceeds in case of an autocatalytic reaction

Last Answer : (A) For a first order consecutive reaction, a tubular flow reactor as compared to a stirred tank reactor provides higher overall selectivity

When does the heat generated by fluid friction becomes appreciable compared to the heat transferred between the fluids? (A) At high fluid velocity (B) At low velocity (C) When fluid flows past a smooth surface (D) None of these

Description : When does the heat generated by fluid friction becomes appreciable compared to the heat transferred between the fluids? (A) At high fluid velocity (B) At low velocity (C) When fluid flows past a smooth surface (D) None of these

Last Answer : (A) At high fluid velocity

M L2 T–2 is the dimensional formula for (a) Moment of inertia (b) Pressure (c) Elasticity (d) Couple acting on a body

Description : M L2 T–2 is the dimensional formula for (a) Moment of inertia (b) Pressure (c) Elasticity (d) Couple acting on a body

Last Answer : Ans:(d)

Drag force acting on a body does not depend upon the (A) Density of the fluid (B) Density of the body (C) Velocity of the body (D) Projected area of the body

Description : Drag force acting on a body does not depend upon the (A) Density of the fluid (B) Density of the body (C) Velocity of the body (D) Projected area of the body

Last Answer : (B) Density of the body

Drag co-efficient for flow past immersed body is the ratio of __________ to the product of velocity head and density. (A) Shear stress (B) Shear force (C) Average drag per unit projected area (D) None of these

Description : Drag co-efficient for flow past immersed body is the ratio of __________ to the product of velocity head and density. (A) Shear stress (B) Shear force (C) Average drag per unit projected area (D) None of these

Last Answer : (C) Average drag per unit projected area

One dimensional flow implies (A) Flow in a straight line (B) Steady uniform flow (C) Unsteady uniform flow (D) A flow which does not account for changes in transverse direction

Description : One dimensional flow implies (A) Flow in a straight line (B) Steady uniform flow (C) Unsteady uniform flow (D) A flow which does not account for changes in transverse direction

Last Answer : (D) A flow which does not account for changes in transverse direction

The dimensional formula of bulk modulus of elasticity is same as that of the (A) Pressure (B) Density (C) Force (D) None of these

Description : The dimensional formula of bulk modulus of elasticity is same as that of the (A) Pressure (B) Density (C) Force (D) None of these

Last Answer : Option A

Using X-ray crystallography, this woman scientist determined the structures of large biochemical molecules, including penicillin in 1949 and vitamin B12 in 1956. In 1969 she determined the three dimensional structure of insulin. In 1964 she was awarded the Nobel Prize in chemistry "for her determination by X-ray techniques of the structures of important biochemical substances." Name this woman scientist.

Description : Using X-ray crystallography, this woman scientist determined the structures of large biochemical molecules, including penicillin in 1949 and vitamin B12 in 1956. In 1969 she determined the three ... X-ray techniques of the structures of important biochemical substances." Name this woman scientist.

Last Answer : ANSWER: (DOROTHY) CROWFOOT HODGKIN

An _______ is a connector showing the relationship between the representative shapes. a) line b) arrow c) Process d) box

Description : An _______ is a connector showing the relationship between the representative shapes. a) line b) arrow c) Process d) box

Last Answer : Answer: b Explanation: Arrows are the connectors that show the relationship between different shapes. They also show the flow of the program

The rolling contact bearings as compared to sliding contact bearings have (a) small overall dimensions (b) accuracy of shaft alignment (c) low starting and low running friction except at very high speeds (d) all the mentioned

Description : The rolling contact bearings as compared to sliding contact bearings have (a) small overall dimensions (b) accuracy of shaft alignment (c) low starting and low running friction except at very high speeds (d) all the mentioned

Last Answer : (d) all the mentioned

Dynamic friction as compared to static friction is (A) Same (B) More (C) Less (D) May be less of more depending on nature of surfaces and velocity

Description : Dynamic friction as compared to static friction is  (A) Same  (B) More  (C) Less  (D) May be less of more depending on nature of surfaces and velocity 

Last Answer : (C) Less 

Dynamic friction as compared to static friction is?

Description : Dynamic friction as compared to static friction is?

Last Answer : Dynamic  friction  is   less  compared  to  static  friction.

Which of the following excavators is most suitable for digging under water? (A) Drag line (B) Hoe (C) Clam shell (D) Dipper shovel

Description : Which of the following excavators is most suitable for digging under water? (A) Drag line (B) Hoe (C) Clam shell (D) Dipper shovel

Last Answer : (A) Drag line

Which of the following earth moving machines has the shortest cycle time? (A) Drag line (B) Hoe (C) Clam shell (D) Dipper shove

Description : Which of the following earth moving machines has the shortest cycle time? (A) Drag line (B) Hoe (C) Clam shell (D) Dipper shove

Last Answer : (D) Dipper shovel

5 ****** Melville Tops For 5 Body Shapes?

Description : 5 Brandy Melville Tops For 5 Body Shapes?

Last Answer : In order to choose a Brandy Melville top that will complement body shape, it is important to choose a design that is either loose or fitted in the right places. There are five different body ... . With this combination, the resulting garment is very flattering, giving an illusioned look of an hour

A stream tube is that, which has __________ cross-section entirely bounded by stream lines. (A) A circular (B) Any convenient (C) A small (D) A large

Description : A stream tube is that, which has __________ cross-section entirely bounded by stream lines. (A) A circular (B) Any convenient (C) A small (D) A large

Last Answer : (B) Any convenient

In case of staged packed bed reactors carrying out exothermic reaction, use (A) High recycle for pure gas (B) Plug flow for dilute liquid requiring no large preheating of feed (C) Cold shot operations for a dilute solution requiring large preheating to bring the stream upto the reaction temperature (D) All (A), (B) and (C)

Description : In case of staged packed bed reactors carrying out exothermic reaction, use (A) High recycle for pure gas (B) Plug flow for dilute liquid requiring no large preheating of feed (C) Cold shot operations for a ... preheating to bring the stream upto the reaction temperature (D) All (A), (B) and (C)

Last Answer : (D) All (A), (B) and (C)

Whenever a plate is held immersed at some angle with the direction of flow of the liquid, it is subjected to some pressure. The component of this pressure, in the direction of flow of the liquid, is known as (A) Lift (B) Drag (C) Stagnation pressure (D) Bulk modulus

Description : Whenever a plate is held immersed at some angle with the direction of flow of the liquid, it is subjected to some pressure. The component of this pressure, in the direction of flow of the liquid, is known as (A) Lift (B) Drag (C) Stagnation pressure (D) Bulk modulus

Last Answer : Answer: Option B

What phenomenon causes induced drag? a. Wing tip vortices b. Wing tanks c. The increased pressure at the leading edge

Description : What phenomenon causes induced drag? a. Wing tip vortices b. Wing tanks c. The increased pressure at the leading edge

Last Answer : a. Wing tip vortices

Which statement is true relative to changing angle of attack? a. A decrease in angle of attack will increase pressure below the wing and decrease drag b. An increase in angle of attack will decrease pressure below the wing and decrease drag c. An increase in angle of attack will increase drag d. An increase in angle of attack will decrease the lift coefficient

Description : Which statement is true relative to changing angle of attack? a. A decrease in angle of attack will increase pressure below the wing and decrease drag b. An increase in angle of attack will ... of attack will increase drag d. An increase in angle of attack will decrease the lift coefficient

Last Answer : c. An increase in angle of attack will increase drag

The region between the separation streamline and the boundary surface of the solid body is known as (A) Wake (B) Drag (C) Lift (D) Boundary layer

Description : The region between the separation streamline and the boundary surface of the solid body is known as (A) Wake (B) Drag (C) Lift (D) Boundary layer

Last Answer : Answer: Option A

A two dimensional rotation is applied to an object by a.Repositioning it along with straight line path b.Repositioning it along with circular path c.Only b d.Any of the mentioned

Description : A two dimensional rotation is applied to an object by a.Repositioning it along with straight line path b.Repositioning it along with circular path c.Only b d.Any of the mentioned

Last Answer : c.Only b

A flow whose streamline is represented by a straight line, is called __________ dimensional flow. (A) One (B) Two (C) Three (D) Four

Description : A flow whose streamline is represented by a straight line, is called __________ dimensional flow. (A) One (B) Two (C) Three (D) Four

Last Answer : Answer: Option A

Which indefinite article should i use before "one", eg, "a one dimensional line" or "an one dimensional line"?

Description : Which indefinite article should i use before "one", eg, "a one dimensional line" or "an one dimensional line"?

Last Answer : a

Which of the following are zero dimensional or one dimensional figuresA. RayB. SegmentC. AngleD. PlaneE. Point F. Line?

Description : Which of the following are zero dimensional or one dimensional figuresA. RayB. SegmentC. AngleD. PlaneE. Point F. Line?

Last Answer : A. RayB. SegmentE. PointF. Line

What is created when you use F11 shortcut key while creating a chart in MS Excel: a) A default chart b) A 2 dimensional column chart c) A 2 dimensional bar chart d) A 3 dimensional line chart e) None of The Above

Description : What is created when you use F11 shortcut key while creating a chart in MS Excel: a) A default chart b) A 2 dimensional column chart c) A 2 dimensional bar chart d) A 3 dimensional line chart e) None of The Above

Last Answer : b) A 2 dimensional column chart

In one dimensional flow, the flow (A) Is steady and uniform (B) Takes place in straight line (C) Takes place in curve (D) Takes place in one direction

Description : In one dimensional flow, the flow (A) Is steady and uniform (B) Takes place in straight line (C) Takes place in curve (D) Takes place in one direction

Last Answer : Answer: Option B

Which of the following statement is wrong? (A) A flow whose streamline is represented by a curve is called two dimensional flow. (B) The total energy of a liquid particle is the sum of potential energy, kinetic energy and pressure energy. (C) The length of divergent portion in a Venturimeter is equal to the convergent portion. (D) A pitot tube is used to measure the velocity of flow at the required point in a pipe.

Description : Which of the following statement is wrong? (A) A flow whose streamline is represented by a curve is called two dimensional flow. (B) The total energy of a liquid particle is the sum of potential energy, ... (D) A pitot tube is used to measure the velocity of flow at the required point in a pipe.

Last Answer : Answer: Option C

Assume that the speed (v) of sound in air depends upon the pressure (P) and density (ρ) of air, then use dimensional analysis to obtain

Description : Assume that the speed (v) of sound in air depends upon the pressure (P) and density (ρ) of air, then use dimensional analysis to obtain

Last Answer : Assume that the speed (v) of sound in air depends upon the pressure (P) and density (ρ) ... analysis to obtain an expression for the speed of sound.