The vertical sides of a door and window openings provided in a wall, are known as
(A) Verticals
(B) Reveals
(C) Jambs
(D) None of these

1 Answer

Answer :

Answer: Option C

Related questions

Description : Exposed portions of vertical surface at right angles to the door or window frame, are known as (A) Jambs (B) Lintels (C) Reveals (D) Soffit

Last Answer : Answer: Option C

Description : The vertical faces of a door opening which support frame of the door, are (A) Jambs (B) Posts (C) Reveals (D) Styles

Last Answer : Answer: Option A

Description : Pick up the incorrect statement from the following: (A) Horizontal D.P.C. is provided at plinth level in internal walls (B) D.P.C. is provided under door and verandah openings (C) Vertical D.P.C. is not provided in internal walls (D) Cement concrete is a rigid damp-proofing material

Last Answer : Answer: Option B

Description : Bottom openings 15 cm × 15 cm in the standing baffle wall are provided A. 15 cm c/c B. 22.5 cm c/c C. 30 cm c/c D. 50 cm c/c

Last Answer : ANS: B

Description : When a vertical wall is subjected to pressures due to liquid on both sides, the resultant pressure is the __________ of the two pressures. (A) Sum (B) Difference (C) Arithmetic mean (D) Geometric mean

Last Answer : Answer: Option B

Description : A vertical wall is subjected to a pressure due to one kind of liquid, on one of its sides. The total pressure on the wall per unit length is (where w = Specific weight of liquid, and H = Height of liquid) (A) wH (B) wH/2 (C) wH2 /2 (D) wH2 /3

Last Answer : Answer: Option C

Description : A vertical wall is subjected to a pressure due to one kind of liquid, on one of its sides. The total pressure on the wall acts at a distance __________ from the liquid surface. (A) H/3 (B) H/2 (C) 2H/3 (D) 3H/4

Last Answer : Answer: Option C

Description : A vertical wall is subjected to a pressure due to one kind of liquid, on one of its sides. Which of the following statement is correct? (A) The pressure on the wall at the liquid level is maximum (B) ... and on the bottom of the wall is maximum (D) The pressure on the bottom of the wall is zero

Last Answer : Answer: Option C

Description : The temperature reinforcement in the vertical slab of a T-shaped R.C. retaining wall is (A) Not needed (B) Provided equally on inner and front faces (C) Provided more on inner face than on front face (D) Provided more on front face than on inner face

Last Answer : Answer: Option D

Description : In English garden wall bond (A) One course of headers to three or five course of stretchers (B) Queen closer in provided in each heading course (C) The middle course of stretchers is started with a header to give proper vertical joints (D) All the above

Last Answer : Answer: Option D

Description : What were narrow vertical openings in the castle walls that allowed missiles to be fired called?

Last Answer : Arrowslits

Description : What are rows in Periodic table called? A. Period (Answer) B. Group C. Verticals D. Perpendiculars

Last Answer : A. Period (Answer)

Description : What are Columns in Periodic table called? A. Period B. Group (Answer) C. Verticals D. Perpendiculars

Last Answer : B. Group (Answer)

Description : Pick up the correct statement from the following: A. Inlets are provided on the road surface at the lowest point for draining rain water B. Inlets are generally provided at an interval of ... along straight roads C. Inlets having horizontal openings, are called horizontal inlets D. All the above

Last Answer : ANS: D

Description : When a cylindrical vessel, containing some liquid, is rotated about its vertical axis, the liquid surface is depressed down at the axis of its rotation and rises up near the walls of the vessel on all sides. This type of flow is known as (A) Steady flow (B) Turbulent flow (C) Vortex flow

Last Answer : Answer: Option C

Description : The window which is provided in flat roof of a room, is known (A) Dormer window (B) Lantern window (C) Louvered window (D) Sky window

Last Answer : Answer: Option B

Description : When an up gradient of a highway meets a downgrade, the vertical curve provided, is known as (A) Valley curve (B) Sag curve (C) Summit curve (D) All the above

Last Answer : Answer: Option C

Description : The projections of head or sill of a door or window frame are (A) Transoms (B) Horns (C) Stops (D) Chock

Last Answer : Answer: Option B

Description : To stagger vertical joints in successive courses of a wall, a piece of brick is generally used at the end of the course, which is known as (A) Bat (B) Header (C) Stretcher (D) Closer

Last Answer : Answer: Option D

Description : The slenderness ratio of a vertical column of a square cross-section of 2.5 cm sides and 300 cm  length, is  (A) 200  (B) 240  (C) 360  (D) 416

Last Answer : (D) 416

Description : Corrosion of well pipes may not be reduced by  (A) Reducing the draw down and the pumping rate  (B) Reducing the flow velocity  (C) Using thicker pipes  (D) Using screens having larger area of openings 

Last Answer : (D) Using screens having larger area of openings 

Description : Carpet area does not include the area of (A) The walls along with doors and other openings (B) Bath room and lavatory (C) Kitchen and pantry (D) All the above

Last Answer : (D) All the above

Description : Pick up the incorrect statement from the following: (A) No deduction is made for the volume occupied by reinforcement (B) No deduction is made for the openings upto 0.1 sq.m (C) No deduction is made for volumes occupied by pipes, not exceeding 100 sq.cm in crosssection (D) None of these

Last Answer : (D) None of these

Description : The lintels are preferred to arches because (A) Arches require more headroom to span the openings like doors, windows etc. (B) Arches require strong abutments to withstand arch thrust (C) Arches are difficult in construction (D) All of the above

Last Answer : Answer: Option D

Description : Pick up the correct statement from the following: (A) Louvered door is generally provided in bath rooms (B) Flush door is generally provided in dining room (C) Revolving door is generally provided in cinema halls (D) Sliding door is generally provided in show rooms

Last Answer : Answer: Option C

Description : Horizontal construction joints in concrete walls are generally provided at (A) Soffit level (B) Window sill level (C) Floor level (D) All the above

Last Answer : Answer: Option D

Description : The window which is provided on a sloping roof of a building, is called (A) Lantern window (B) Dormer window (C) Louvered window (D) Rash window

Last Answer : Answer: Option B

Description : The opening provided in sloping roof with its top parallel to the roof surface, is called (A) Dormer window (B) Sky light window (C) Lantern window (D) Louvered window

Last Answer : Answer: Option B

Description : Pick up the incorrect statement from the following: (A) Tresguet did not provide the top camber for the drainage of surface water (B) Tresguet provided the top camber for the drainage of surface ... (D) Macadam provided a camber to the formation at the dug-up state, to drain percolated water

Last Answer : Answer: Option A

Description : In hill roads the side drains arc provided (A) Only on the hill side of road (B) Only on the opposite side of hill (C) On both sides of roa (D) None of the above

Last Answer : Answer: Option A

Description : The shear reinforcement in R.C.C. is provided to resist (A) Vertical shear (B) Horizontal shear (C) Diagonal compression (D) Diagonal tension

Last Answer : Answer: Option D

Description : If the rate of change of grade permitted along a vertical curve is r and total change of grade is g%, the length L of the curve to be provided, is (A) L = (r × 100/g) m (B) L = (g × 100/r) m (C) L = (r + g) × 100m (D) L = [100/(r + g)] m

Last Answer : Answer: Option B

Description : Pick up the incorrect statement from the following: (A) Highways are always constructed in straight line (B) Highways may be provided horizontal curves (C) Highways may be provided vertical curves (D) Highways may be provided both horizontal and vertical curves

Last Answer : Answer: Option A

Description : In retaining and breast walls, weep holes are provided at (A) 50 cm vertical height and 50 cm centre to centre horizontally (B) 100 cm vertical height and 100 cm centre to centre horizontally ... cm centre to centre horizontally (D) 120 cm vertical height and 100 cm centre to centre horizontally

Last Answer : Answer: Option C

Description : The type of curves generally provided on highways, is (A) Critical curve (B) Transition curve (C) Vertical curve (D) All the above

Last Answer : Answer: Option D

Description : Vertical construction joints are provided where the shearing forces are minimum in the case of (A) Slabs (B) Beams (C) Girders (D) All of these

Last Answer : Answer: Option D

Description : Shear reinforcement is provided in the form of (a) Vertical bars (b) Inclined bars (c) Combination of vertical and inclined bars (d) All the above

Last Answer : (d) All the above

Description : On the ladder resting on the ground and leaning against a smooth vertical wall, the force of  friction will be  (A) Downwards at its upper end  (B) Upwards at its upper end  (C) Perpendicular to the wall at its upper end  (D) Zero at its upper end 

Last Answer : (D) Zero at its upper end 

Description : On a ladder resting on smooth ground and leaning against vertical wall, the force of friction will be (A) Towards the wall at its upper end (B) Away from the wall at its upper end (C) Upwards at its upper end (D) Downwards at its upper end

Last Answer : (C) Upwards at its upper end

Description : A heavy ladder resting on floor and against a vertical wall may not be in equilibrium, if (A) The floor is smooth, the wall is rough (B) The floor is rough, the wall is smooth (C) The floor and wall both are smooth surfaces (D) The floor and wall both are rough surfaces

Last Answer : (C) The floor and wall both are smooth surfaces

Description : A retaining wall 6m high supports a backfill with a surcharge angle of 10°. The back of the wall is inclined to the vertical at a positive batter angle of 5°. If the angle of wall friction is 7°, then the resultant ... inclined to the horizontal at an angle of (A) 7° (B) 10° (C) 12° (D) 17

Last Answer : (C) 12°

Description : A failure wedge develops if a retaining wall (A) Moves away from the backfill (B) Moves towards the backfill (C) Sinks downwards (D) Stresses equally by vertical and horizontal forces

Last Answer : Answer: Option A

Description : Rankine's theory of earth pressure assumes that the back of the wall is (A) Plane and smooth (B) Plane and rough (C) Vertical and smooth (D) Vertical and rough

Last Answer : Answer: Option C

Description : Rankine's theory of active earth pressure assumes (A) Soil mass is homogeneous, dry and cohesionless (B) Ground surface is a plane which may be horizontal or inclined (C) Back of the wall is vertical and smooth (D) All the above

Last Answer : Answer: Option D

Description : The major principal stress in an element of cohesion-less soil within the backfill of a retaining wall is (A) Vertical if the soil is in an active state of plastic equilibrium (B) Vertical if the ... state of plastic equilibrium (C) Inclined at 45° to the vertical plane (D) None of the above

Last Answer : Answer: Option A

Description : Total pressure on the vertical face of a retaining wall of height h acts parallel to free surface and from the base at a distance of (A) h/4 (B) h/3 (C) h/2 (D) 2h/3

Last Answer : Answer: Option B

Description : A straight glacis type fall with a baffle platform and a baffle wall is called (A) Vertical drop-fall (B) Glacis fall (C) Montague type fall (D) Inglis fall

Last Answer : Answer: Option D

Description : The water pressure per metre length on a vertical masonry wall of dam is (where w = Specific weight of the liquid, and H = Height of the liquid) (A) wH/2 (B) wH (C) wH2 /2 (D) wH2 /4

Last Answer : Answer: Option C

Description : Pick up the correct statement from the following: (A) The artificial barrier constructed to enclose "n area for safe anchorage, is called break water (B) The smoothened surface at the top end of ... fending (C) The effective berthing lengths of inclined guays can be adjusted (D) All the above

Last Answer : (D) All the above

Description : Which of the following type of sea walls results in greatest protection of shore structures? (A) Vertical sea wall (B) Sea wall with batter (C) Stepped sea wall (D) Sea wall with concave face

Last Answer : (D) Sea wall with concave face