The water pressure per metre length on a vertical masonry wall of dam is (where w = Specific weight of the liquid, and H = Height of the liquid) (A) wH/2(B) wH (C) wH2 /2 (D) wH2 /4

The water pressure per metre length on a vertical masonry wall of dam is (where w = Specific
weight of the liquid, and H = Height of the liquid)
(A) wH/2
(B) wH
(C) wH2
/2
(D) wH2
/4
by

1 Answer

Answer :

Answer: Option C
by

Related questions

A vertical wall is subjected to a pressure due to one kind of liquid, on one of its sides. The total pressure on the wall per unit length is (where w = Specific weight of liquid, and H = Height of liquid) (A) wH (B) wH/2 (C) wH2 /2 (D) wH2 /3

Description : A vertical wall is subjected to a pressure due to one kind of liquid, on one of its sides. The total pressure on the wall per unit length is (where w = Specific weight of liquid, and H = Height of liquid) (A) wH (B) wH/2 (C) wH2 /2 (D) wH2 /3

Last Answer : Answer: Option C

If is the angle of repose of soil of weight w kg/m3 , the horizontal pressure p at a depth of h metres per metre length of wall, is (A) wh × [(1 - sin )/(1 + )] (B) (wh/2) × [(1 - sin )/(1 + )] (C) wh - sin )/(1 + )] (D) wh )/(1 - )

Description : If is the angle of repose of soil of weight w kg/m3 , the horizontal pressure p at a depth of h metres per metre length of wall, is (A) wh × [(1 - sin )/(1 + )] (B) (wh/2) × [(1 - sin )/(1 + )] (C) wh - sin )/(1 + )] (D) wh )/(1 - )

Last Answer : Answer: Option A

The pressure intensity in kN/m2 (or kPa) at any point in a liquid is (where w = Specific weight of liquid, and h = Depth of liquid from the surface) (A) w (B) wh (C) w/h (D) h/w

Description : The pressure intensity in kN/m2 (or kPa) at any point in a liquid is (where w = Specific weight of liquid, and h = Depth of liquid from the surface) (A) w (B) wh (C) w/h (D) h/w

Last Answer : Answer: Option B

A masonry dam (density = 20,000 N/m3 ) 6 m high, one metre wide at the top and 4 m wide at the base, has vertical water face. The minimum stress at the base of the dam when the reservoir is full, will be (A) 75 N/m2 (B) 750 N/m2 (C) 7500 N/m2 (D) 75000 N/m

Description : A masonry dam (density = 20,000 N/m3 ) 6 m high, one metre wide at the top and 4 m wide at the  base, has vertical water face. The minimum stress at the base of the dam when the reservoir is  full, will be  (A) 75 N/m2 (B) 750 N/m2 (C) 7500 N/m2 (D) 75000 N/m

Last Answer : (C) 7500 N/m

For a homogeneous earth dam 50 m high having 2 m free broad, a flow net was constructed and the results were : Number of potential drops = 2.4 Number of flow channels = 0.4. If co-efficiency of permeability of the dam material is 3 × 10-3 cm3 /sec, the discharge per metre length of dam, is (A) 12 × 10-5 m3 /sec (B) 24 × 10-3 m3 /sec (C) 6 × 10-5 m3 /sec (D) 24 × 10-5 m3 /sec

Description : For a homogeneous earth dam 50 m high having 2 m free broad, a flow net was constructed and the results were : Number of potential drops = 2.4 Number of flow channels = 0.4. If co-efficiency of permeability of the dam material is ... 24 10-3 m3 /sec (C) 6 10-5 m3 /sec (D) 24 10-5 m3 /sec

Last Answer : (D) 24 × 10-5 m3 /sec

If w is the weight of water per cubic metre, Q is the discharge in cubic metres per sec and H is the total head, the required water horse power of the pump, is (A) wQH/15 (B) wQH/360 (C) wQH/220 (D) wQH/550

Description : If w is the weight of water per cubic metre, Q is the discharge in cubic metres per sec and H is the total head, the required water horse power of the pump, is (A) wQH/15 (B) wQH/360 (C) wQH/220 (D) wQH/550

Last Answer : (A) wQH/15

Total pressure on the vertical face of a retaining wall of height h acts parallel to free surface and from the base at a distance of (A) h/4 (B) h/3 (C) h/2 (D) 2h/3

Description : Total pressure on the vertical face of a retaining wall of height h acts parallel to free surface and from the base at a distance of (A) h/4 (B) h/3 (C) h/2 (D) 2h/3

Last Answer : Answer: Option B

If is the pull applied at the ends of tape in kg, is the length of tape between end marks in metres, is the weight of the tape in kg per metre run, then sag correction (A) C = w²l3 /24F² (B) C = w 3 l²/24F² (C) C = w²l3 /24F3 (D) C = 24w²l3 /80F

Description : If is the pull applied at the ends of tape in kg, is the length of tape between end marks in metres, is the weight of the tape in kg per metre run, then sag correction (A) C = w²l3 /24F² (B) C = w 3 l²/24F² (C) C = w²l3 /24F3 (D) C = 24w²l3 /80F

Last Answer : (A) C = w²l3 /24F²

A vertical wall is subjected to a pressure due to one kind of liquid, on one of its sides. The total pressure on the wall acts at a distance __________ from the liquid surface. (A) H/3 (B) H/2 (C) 2H/3 (D) 3H/4

Description : A vertical wall is subjected to a pressure due to one kind of liquid, on one of its sides. The total pressure on the wall acts at a distance __________ from the liquid surface. (A) H/3 (B) H/2 (C) 2H/3 (D) 3H/4

Last Answer : Answer: Option C

w k intensity at that point will be (A) h (B) wh (C) w/h (D) h/w

Description : w k intensity at that point will be (A) h (B) wh (C) w/h (D) h/w

Last Answer : Answer: Option B

Engineering news formula for obtaining safe bearing capacity of pile for drop hammer, is, (A) Q = Wh/6 (S + 2.5) (B) Q = Wh/2.5 (S + 6) (C) Q = (W × 6)/h (S + 2.5) (D) Q = (W × 2.5)/6 (S + h)

Description : Engineering news formula for obtaining safe bearing capacity of pile for drop hammer, is, (A) Q = Wh/6 (S + 2.5) (B) Q = Wh/2.5 (S + 6) (C) Q = (W × 6)/h (S + 2.5) (D) Q = (W × 2.5)/6 (S + h)

Last Answer : Answer: Option A

For one cubic metre of brick masonry, number of bricks required, is (A) 400 (B) 425 (C) 450 (D) 500

Description : For one cubic metre of brick masonry, number of bricks required, is (A) 400 (B) 425 (C) 450 (D) 500

Last Answer : Answer: Option D

Number of bricks required for one cubic metre of brick masonry is (A) 400 (B) 450 (C) 500 (D) 550

Description : Number of bricks required for one cubic metre of brick masonry is (A) 400 (B) 450 (C) 500 (D) 550

Last Answer : Answer: Option C

The stem of a cantilever retaining wall which retains earth level with top is 6 m. If the angle of repose and weight of the soil per cubic metre are 30° and 2000 kg respectively, the effective width of the stem at the bottom, is (A) 51.5 (B) 52.5 (C) 53.5 (D) 54.5

Description : The stem of a cantilever retaining wall which retains earth level with top is 6 m. If the angle of repose and weight of the soil per cubic metre are 30° and 2000 kg respectively, the effective width of the stem at the bottom, is (A) 51.5 (B) 52.5 (C) 53.5 (D) 54.5

Last Answer : Answer: Option C

A water tank contains 1.3 m deep water. The pressure exerted by the water per metre length of the tank is (A) 2.89 kN (B) 8.29 kN (C) 9.28 kN (D) 28.9 kN

Description : A water tank contains 1.3 m deep water. The pressure exerted by the water per metre length of the tank is (A) 2.89 kN (B) 8.29 kN (C) 9.28 kN (D) 28.9 kN

Last Answer : Answer: Option B

Maximum slenderness ratio for load-bearing masonry wall in cement mortar, as per IS code, shall not exceed. (a) 13 (b) 20 (c) 27 (d) 30

Description : Maximum slenderness ratio for load-bearing masonry wall in cement mortar, as per IS code, shall not exceed. (a) 13 (b) 20 (c) 27 (d) 30

Last Answer : (c) 27

If At is the area of steel cross-section, t is working stress, L is width of road and W is weight of slab per square metre, the spacing of the tie bars for a longitudinal joint, is (A) (100 At × t)/WL (B) 100 At/tWL (C) (100 WAt × t)/tL (D) 100 WL/At t

Description : If At is the area of steel cross-section, t is working stress, L is width of road and W is weight of slab per square metre, the spacing of the tie bars for a longitudinal joint, is (A) (100 At × t)/WL (B) 100 At/tWL (C) (100 WAt × t)/tL (D) 100 WL/At t

Last Answer : Answer: Option D

A wall have length 24m and breadth 16m. What will be total cost of painting it from both sides if rate of painting is Rs 8 per square metre? 1) Rs 5696 2) Rs 5856 3) Rs 6032 4) Rs 6144 5) Rs 6272

Description : A wall have length 24m and breadth 16m. What will be total cost of painting it from both sides if rate of painting is Rs 8 per square metre? 1) Rs 5696 2) Rs 5856 3) Rs 6032 4) Rs 6144 5) Rs 6272

Last Answer : 4) Rs 6144

The loss of head due to viscosity for laminar flow in pipes is (where d = Diameter of pipe, l = Length of pipe, v w = Specific weight of the flowing liquid) (A) 4 (B) 8 (C) 16 (D) 32

Description : The loss of head due to viscosity for laminar flow in pipes is (where d = Diameter of pipe, l = Length of pipe, v w = Specific weight of the flowing liquid) (A) 4 (B) 8 (C) 16 (D) 32

Last Answer : Answer: Option D

The wall of a dam is made thicker at the bottom than at the top because the pressure exerted by the water on the wall (1) depends on the thickness of the wall (2) increases with height of the wall (3) increases with depth of the wall (4) depends on the area of the wall

Description : The wall of a dam is made thicker at the bottom than at the top because the pressure exerted by the water on the wall (1) depends on the thickness of the wall (2) increases with height of the wall (3) increases with depth of the wall (4) depends on the area of the wall

Last Answer :  increases with depth of the wall

Back fill with a sloping surface exerts a total active pressure Pa on the wall of height H and acts at (A) H/4 above the base parallel to base (B) H/2 above the base parallel to base (C) H/3 above the base parallel to base (D) H/5 above the base parallel to base

Description : Back fill with a sloping surface exerts a total active pressure Pa on the wall of height H and acts at (A) H/4 above the base parallel to base (B) H/2 above the base parallel to base (C) H/3 above the base parallel to base (D) H/5 above the base parallel to base

Last Answer : Answer: Option C

When a vertical wall is subjected to pressures due to liquid on both sides, the resultant pressure is the __________ of the two pressures. (A) Sum (B) Difference (C) Arithmetic mean (D) Geometric mean

Description : When a vertical wall is subjected to pressures due to liquid on both sides, the resultant pressure is the __________ of the two pressures. (A) Sum (B) Difference (C) Arithmetic mean (D) Geometric mean

Last Answer : Answer: Option B

A vertical wall is subjected to a pressure due to one kind of liquid, on one of its sides. Which of the following statement is correct? (A) The pressure on the wall at the liquid level is minimum(B) The pressure on the bottom of the wall is maximum (C) The pressure on the wall at the liquid level is zero, and on the bottom of the wall is maximum (D) The pressure on the bottom of the wall is zero

Description : A vertical wall is subjected to a pressure due to one kind of liquid, on one of its sides. Which of the following statement is correct? (A) The pressure on the wall at the liquid level is maximum (B) ... and on the bottom of the wall is maximum (D) The pressure on the bottom of the wall is zero

Last Answer : Answer: Option C

To obtain good bonding in brick masonry (A) First class bricks are used (B) Vertical joints in alternate courses are kept in plumb line (C) Bats are used where necessary (D) All the above

Description : To obtain good bonding in brick masonry (A) First class bricks are used (B) Vertical joints in alternate courses are kept in plumb line (C) Bats are used where necessary (D) All the above

Last Answer : Option D

The total pressure on a horizontally immersed surface is (where w = Specific weight of the liquid, A = Area of the immersed surface, and x = Depth of the centre of gravity of the immersed surface from the liquid surface) (A) wA (B) wx (C) wAx (D) wA/x

Description : The total pressure on a horizontally immersed surface is (where w = Specific weight of the liquid, A = Area of the immersed surface, and x = Depth of the centre of gravity of the immersed surface from the liquid surface) (A) wA (B) wx (C) wAx (D) wA/x

Last Answer : Answer: Option C

The weight per unit volume of a liquid at a standard temperature and pressure is called (A) Specific weight (B) Mass density (C) Specific gravity (D) None of these

Description : The weight per unit volume of a liquid at a standard temperature and pressure is called (A) Specific weight (B) Mass density (C) Specific gravity (D) None of these

Last Answer : Answer: Option A

The mass per unit volume of a liquid at a standard temperature and pressure is called (A) Specific weight (B) Mass density (C) Specific gravity (D) None of these

Description : The mass per unit volume of a liquid at a standard temperature and pressure is called (A) Specific weight (B) Mass density (C) Specific gravity (D) None of these

Last Answer : Answer: Option B

The world's longest masonry dam is (a) Hirakud (b) Bhakra Nangal (c) Nagarjuna Sagar (d) Aswan

Description : The world's longest masonry dam is (a) Hirakud (b) Bhakra Nangal (c) Nagarjuna Sagar (d) Aswan

Last Answer : Ans: (a)

The largest Masonry dam has been constructed on the river- (1) Krishna (2) Rihand (3) Sutlej (4) Mahanadi

Description : The largest Masonry dam has been constructed on the river- (1) Krishna (2) Rihand (3) Sutlej (4) Mahanadi

Last Answer : (1) Krishna Explanation: Masonry dams are dams made out of masonry; mainly stone and brick. They are either the gravity or the arch type. The largest masonry dam in the world is ... in India which is built across Krishna River at Nagarjunasagar in Guntur and Nalgonda districts of Andhra Pradesh.

The largest Masonry dam has been constructed on the river (1) Krishna (2) Rihand (3) Sutlej (4) Mahanadi

Description : The largest Masonry dam has been constructed on the river (1) Krishna (2) Rihand (3) Sutlej (4) Mahanadi

Last Answer : Krishna

Number of subdivisions per metre length of a levelling staff is (A) 100 (B) 200 (C) 500 (D) 1000

Description : Number of subdivisions per metre length of a levelling staff is  (A) 100  (B) 200  (C) 500  (D) 1000 

Last Answer : (B) 200 

Numbers of links per metre length of a chain are (A) 2 (B) 5 (C) 7 (D) 10

Description : Numbers of links per metre length of a chain are (A) 2 (B) 5 (C) 7 (D) 10

Last Answer : (B) 5

If a rectangular beam measuring 10 × 18 × 400 cm carries a uniformly distributed load such that the bending stress developed is 100 kg/cm2 . The intensity of the load per metre length, is (A) 240 kg (B) 250 kg (C) 260 kg (D) 270 kg

Description : If a rectangular beam measuring 10 × 18 × 400 cm carries a uniformly distributed load such that the bending stress developed is 100 kg/cm2 . The intensity of the load per metre length, is (A) 240 kg (B) 250 kg (C) 260 kg (D) 270 kg

Last Answer : (B) 250 kg

A pile of length carrying a uniformly distributed load per metre length is suspended at the centre and from other two points 0.15 L from either end ; the maximum hogging moment will be (A) WL²/15 (B) WL²/30 (C) WL²/60 (D) WL²/90

Description : A pile of length carrying a uniformly distributed load per metre length is suspended at the centre and from other two points 0.15 L from either end ; the maximum hogging moment will be (A) WL²/15 (B) WL²/30 (C) WL²/60 (D) WL²/90

Last Answer : Answer: Option D

A pile of length carrying a uniformly distributed load per metre length is suspended at two points, the maximum, B.M. at the centre of the pile or at the points of suspension, is (A) WL/8 (B) WL²/24 (C) WL²/47 (D) WL²/16

Description : A pile of length carrying a uniformly distributed load per metre length is suspended at two points, the maximum, B.M. at the centre of the pile or at the points of suspension, is (A) WL/8 (B) WL²/24 (C) WL²/47 (D) WL²/16

Last Answer : Answer: Option C

Area of steel required per metre width of pavement for a length of 20 m for design wheel load 6300 kg and permissible stress in steel 1400 kg/cm2 , is (A) 70 kg/sq cm (B) 80 kg/sq cm (C) 90 kg/sq cm (D) 100 kg/sq cm

Description : Area of steel required per metre width of pavement for a length of 20 m for design wheel load 6300 kg and permissible stress in steel 1400 kg/cm2 , is (A) 70 kg/sq cm (B) 80 kg/sq cm (C) 90 kg/sq cm (D) 100 kg/sq cm

Last Answer : Answer: Option C

The taper of precast concrete pile should not be more than (A) 1 cm per metre length (B) 2 cm per metre length (C) 4 cm per metre length (D) 5 cm per metre length

Description : The taper of precast concrete pile should not be more than (A) 1 cm per metre length (B) 2 cm per metre length (C) 4 cm per metre length (D) 5 cm per metre length

Last Answer : Answer: Option B

Economic height of a dam is the height corresponding to which (A) Cost of the dam per unit of storage is minimum (B) Amount of silting is less (C) Cost of dam per unit storage is maximum (D) Free board provided is least

Description : Economic height of a dam is the height corresponding to which  (A) Cost of the dam per unit of storage is minimum  (B) Amount of silting is less  (C) Cost of dam per unit storage is maximum  (D) Free board provided is least 

Last Answer : (A) Cost of the dam per unit of storage is minimum 

Rail section is generally designated by its A. Total weight B. Total length C. Weight per metre length D. Area of its cross-section

Description : Rail section is generally designated by its A. Total weight B. Total length C. Weight per metre length D. Area of its cross-section

Last Answer : C [Weight per metre length] Explanation: The rail section is designated by its weight in 1b/yard or in kg/m. The standard rail sections in use on Indian Railways are 60 kg/m, 52 kg/m and 9OR ... 60R for MG and 50R for NG. In India, the standard rails are either of medium manganese or carbon steels.

The type of stone masonry in which stones of same height are laid in layers, is called (A) Random rubble masonry (B) Course rubble masonry (C) Uncoursed rubble masonry (D) Ashlar masonry

Description : The type of stone masonry in which stones of same height are laid in layers, is called (A) Random rubble masonry (B) Course rubble masonry (C) Uncoursed rubble masonry (D) Ashlar masonry

Last Answer : Answer: Option B

When H is the flight height, R is the appropriate radial measure and d is the relief displacement, the vertical height of an object appearing on an aerial photograph is

Description : When H is the flight height, R is the appropriate radial measure and d is the relief displacement, the vertical height of an object appearing on an aerial photograph is

Last Answer : dH/R

For stairs spanning l metres longitudinally between supports at the bottom and top of a flight carrying a load w per unit horizontal area, the maximum bending moment per metre width, is (A) wl²/4 (B) wl²/8 (C) wl²/12 (D) wl²/16

Description : For stairs spanning l metres longitudinally between supports at the bottom and top of a flight carrying a load w per unit horizontal area, the maximum bending moment per metre width, is (A) wl²/4 (B) wl²/8 (C) wl²/12 (D) wl²/16

Last Answer : Answer: Option D

If T and R are the tread and rise of a stair which carries a load w per square metre on slope, the corresponding load per square metre of the horizontal area, is (A) w (R + T)/T (B) w (R² + T²)/T (C) w (R + T)/T (D) w (R/T)

Description : If T and R are the tread and rise of a stair which carries a load w per square metre on slope, the corresponding load per square metre of the horizontal area, is (A) w (R + T)/T (B) w (R² + T²)/T (C) w (R + T)/T (D) w (R/T)

Last Answer : Answer: Option B

Pick up the correct statement from the following: (A) The breakwater which can be used as a platform for loading and unloading of cargo is called a mole (B) The brick masonry retaining wall which is used for loading and unloading of cargo is called quay wall (C) Three types of break waters are generally provided in harbours (D) All of the above

Description : Pick up the correct statement from the following: (A) The breakwater which can be used as a platform for loading and unloading of cargo is called a mole (B) The brick masonry retaining wall which is ... wall (C) Three types of break waters are generally provided in harbours (D) All of the above

Last Answer : (D) All of the above

The critical section for finding maximum bending moment for footing under masonry wall is located (A) At the middle of the wall (B) At the edge of the wall (C) Halfway between the middle and edge of the wall (D) At a distance equal to effective depth of footing from the edge of the wall

Description : The critical section for finding maximum bending moment for footing under masonry wall is located (A) At the middle of the wall (B) At the edge of the wall (C) Halfway between the middle and edge of the wall (D) At a distance equal to effective depth of footing from the edge of the wall

Last Answer : Answer: Option C

Expansion Joints in masonry walls are provided in wall lengths usater than (A) 10 m (B) 20 m (C) 30 m (D) 40 m

Description : Expansion Joints in masonry walls are provided in wall lengths usater than (A) 10 m (B) 20 m (C) 30 m (D) 40 m

Last Answer : Answer: Option D

A mortar joint in masonry which is normal to the face of wall is known as (A) Bed joint (B) Wall joint (C) Cross joint (D) Bonded join

Description : A mortar joint in masonry which is normal to the face of wall is known as (A) Bed joint (B) Wall joint (C) Cross joint (D) Bonded join

Last Answer : Answer: Option C

The stretcher bond in brick masonry can be used only when the thickness of wall is (A) 90 mm (B) 180 mm (C) 190 mm (D) 280 mm

Description : The stretcher bond in brick masonry can be used only when the thickness of wall is (A) 90 mm (B) 180 mm (C) 190 mm (D) 280 mm

Last Answer : Answer: Option A

Find the correct statement from the followings. (a) For a cantilever slab, the ratio of span to overall depth should not 12. (b) One way slab which carry uniformly distributed load should be designed to resist a sagging bending moment near mid-span. (c) When the slab is built into a brick or masonry wall the slab should be designed to resist a hogging moment at the face of the support. (d) All of the above.

Description : Find the correct statement from the followings. (a) For a cantilever slab, the ratio of span to overall depth should not 12. (b) One way slab which carry uniformly distributed load should be designed to ... be designed to resist a hogging moment at the face of the support. (d) All of the above.

Last Answer : (d) All of the above.

A rectangular tank 10 m x 5 m in plan and 3 m deep is divided by a partition wall parallel to the shorter wall of the tank. One of the compartments contains water to a depth of 3 m, and the other a lighter liquid of specific gravity 0.75 to a depth of 2 m. The resultant pressure thrust on the partition wall is (a) 1000 kg (b) 1500 kg (c) 2000 kg (d) 2500 kg

Description : A rectangular tank 10 m x 5 m in plan and 3 m deep is divided by a partition wall parallel to the shorter wall of the tank. One of the compartments contains water to a depth of 3 m, and the other a lighter ... pressure thrust on the partition wall is (a) 1000 kg (b) 1500 kg (c) 2000 kg (d) 2500 kg

Last Answer : Correct Answer is 15000 kg