Description : Pick up the incorrect statement from the following: (A) In Flemish bond, headers and stretchers are laid alternately in the same course (B) In Flemish bond every header in each course lies ... laid in every course (D) In English bond, headers and stretchers are laid in alternate courses
Last Answer : Answer: Option C
Description : The type of bond in a brick masonry containing alternate courses of stretchers and headers, is called (A) Flemish bond (B) English bond (C) Stretcher bond (D) Header bond
Last Answer : Answer: Option B
Description : Single Flemish bond consists of (A) Double Flemish bond facing and English bond backing in each course (B) English bond facing and double Flemish bond backing in each course (C) Stretcher bond ... bond backing in each course (D) Double Flemish bond facing and header bond backing in each course
Last Answer : Answer: Option A
Description : Dutch bond is a modification of (A) English bond (B) Stretcher bond (C) Header bond (D) Single Flemish bon
Description : Pick up the correct statement from the following: (A) English bond is used for brick masonry to support heavy loads (B) Double-Flemish bond is suitable for brick masonry to give uniform face ... The stretcher bond is used for the construction of half brick masonry brick (D) All the above
Last Answer : Answer: Option D
Description : Minimum thickness of wall where single Flemish bond can be used is (A) Half brick thick (B) One brick thick (C) One and a half bricks thick (D) Two bricks thick
Description : The brick laid with its length parallel to the face of a wall, is a known as (A) Header (B) Stretcher (C) Closer (D) None of the
Description : The brick laid with its breadth parallel to the face of a wall, is known as (A) Header (B) Stretcher (C) Closer (D) None of these
Description : To stagger vertical joints in successive courses of a wall, a piece of brick is generally used at the end of the course, which is known as (A) Bat (B) Header (C) Stretcher (D) Closer
Description : In English garden wall bond (A) One course of headers to three or five course of stretchers (B) Queen closer in provided in each heading course (C) The middle course of stretchers is started with a header to give proper vertical joints (D) All the above
Description : How many bricks will be required to construct a wall 8 m long, 6 m high and 22.5 cm thick, if each brick measures 25 cm x 11.25 cm x 6 cm? -Maths 9th
Last Answer : ∵ Volume of one brick = (25 × 11.25 × 6) cm3 and volume of the wall = (800 × 600 × 22.5) cm3 ∴ Number of bricks = Volume of the walls / Volume of one brick = 800 × 600 × 22.5 / 25 × 11.25 × 6 = 6400
Description : The stretcher bond in brick masonry can be used only when the thickness of wall is (A) 90 mm (B) 180 mm (C) 190 mm (D) 280 mm
Description : Which one of the following activities is not correct as applicable to brick corbels? (A) The maximum projection of the corbel should not be more than the thickness of the wall (B) The ... to carry heavy concentrated loads (D) Stretcher bond is generally used for the construction of brick corbel
Description : In brick masonry the bond produced by laying alternate headers and stretchers in each course is known as (A) English bond (B) Double Flemish bond (C) Zigzag bond (D) Single Flemish bond
Description : The type of bond provided in brick masonry for carrying heavy loads is (A) Single Flemish bond (B) Double Flemish bond (C) English bond (D) Zigzag bond
Description : The type of bond in which every course contains both headers and stretchers, is called (A) English bond (B) Flemish bond (C) Russian band (D) Mixed bond
Description : As compared to English bond, double Flemish bond is (A) Stronger (B) More compact (C) Costly (D) None of these
Description : Queen closer may be placed (A) In header course (B) In stretcher course (C) In header course next to first brick (D) In stretcher course next to first brick
Description : Number of vertical joints in a stretcher course is x times the number of joints in the header course, where x is equal to (A) 1/2 (B) 1 (C) 2 (D) 1/4
Description : As compared to stretcher course, the thickness of joints in header course should be (A) Less (B) More (C) Equal (D) Equal or more
Last Answer : Option A
Description : The bond in which headers and stretchers are laid in alternate courses and every stretcher course is started with a three fourth brick bat, is known as (A) English cross bond (B) Dutch bond (C) Monk bond (D) Rat-trap bond
Last Answer : : Option B
Description : The 9 cm × 9 cm side of a brick as seen in the wall face, is generally known as (A) Stretcher (B) Face (C) Front (D) Heade
Description : The 19 cm × 9 cm side of a brick as seen in the wall face, is generally known as (A) Stretcher (B) Face (C) Front (D) Header
Description : Describe in brief with neat sketch: i) English bond ii) Flemish bond
Last Answer : English bond : The Bond with alternate courses of headers and stretchers with a closer placed next to quoin header is called as the English Bond. Points Should be Remembered for English bond: 1. A ... . 4. Flemish Bond is slightly economical as a number of brick bats can be used.
Description : The thickness of a reinforced brick partition wall, is generally kept (A) 5 cm (B) 10 cm (C) 15 cm (D) 20 cm
Description : A rectangular tank 10 m x 5 m in plan and 3 m deep is divided by a partition wall parallel to the shorter wall of the tank. One of the compartments contains water to a depth of 3 m, and the other a lighter ... pressure thrust on the partition wall is (a) 1000 kg (b) 1500 kg (c) 2000 kg (d) 2500 kg
Last Answer : Correct Answer is 15000 kg
Description : . The inner wall of a furnace is at a temperature of 700°C. The composite wall is made of two substances, 10 and 20 cm thick with thermal conductivities of 0.05 and 0.1 W.m-1.°C-1 respectively. The ambient air is at 30°C ... from the outer surface in W.m-2 is (A) 165.4 (B) 167.5 (C) 172.5 (D) 175
Last Answer : (A) 165.4
Description : The expected out turn of half brick partition wall per mason per day is (A) 1.5 m3 (B) 2.0 m3 (C) 4.0 m2 (D) 5.0 m2
Last Answer : (B) 2.0 m3
Description : Pick up the correct statement regarding the centre line method of estimating a building (A) Product of the centre line of the walls and area of cross-section of any item, gives total quantity of the ... length is reduced by half the layer of main wall joining the partition wall (D) All the above
Last Answer : (D) All the above
Description : Brick nogging type of partition wall, is constructed by (A) Laying bricks as stretchers in cement mortar (B) Laying bricks as headers in cement mortar (C) Reinforcing brick wall with iron straps (D) Constructing brick work within a wooden framework
Description : For a wall carrying heavy load on low bearing capacity soil, (A) Lean concrete bed is provided (B) Thick concrete bed is provided (C) Reinforced concrete bed is provided (D) Both (a) and (c) of the above
Description : For 100 sq. m cement concrete (1 : 2: 4) 4 cm thick floor, the quantity of cement required, is (A) 0.90 m3 (B) 0.94 m3 (C) 0.98 m3 (D) 1.00 m3
Last Answer : (B) 0.94 m3
Description : In the method of tube boring of soil investigation, the following is essential: (A) A tube of about 2 metres length and 20 cm diameter with a cutting edge (B) A flap valve at the bottom of tube is ... and lowered by 4 thick rope moving over a pulley suspended on a tripod stand (D) All the above
Description : Suggest the type of glass used for the following work: i) Making panel of partition wall ii) Cashier Cabin iii) Skylight iv) Door Shutter
Last Answer : i) Making panel of partition wall: Block glass OR Sheet Glass OR chipped and ground glass OR soda lime glass ii) Cashier Cabin-Polished plate glass OR bullet proof glass OR soda lime glass OR laminated ... clear window glass or lead glass iv) Door Shutter: Soda lime glass OR tempered glass
Description : For M 150 mix concrete, according to I.S. specifications, local bond stress, is (A) 5 kg/cm2 (B) 10 kg/cm2 (C) 15 kg/cm2 (D) 20 kg/cm
Description : Construct an equilateral triangle of altitude 6 cm. -Maths 9th
Last Answer : 1.Draw any line l. 2.Take any point M on it and draw a line p perpendicular to l. 3.With M as centre, cut off MC = 6 cm 4.At C, with initial line CM construct angles of measures 30° on both sides and let these lines intersect line l in A and B. Thus, ΔABC is the required triangle.
Description : Draw a line segment QR = 5 cm. Construct perpendiculars at point Q and R to it. -Maths 9th
Last Answer : 1.Draw a line segment QR = 5 cm. 2.With Q as centre, construct an angle of 90° and let this line through Q is QX. 3. With R as centre, construct an angle of 90° and let this line through R is RY. Yes, the perpendicular lines QX and- RY are parallel.
Description : Is it possible to construct a triangle with lengths of its sides as 4 cm, 3 cm and 7 cm ? -Maths 9th
Last Answer : No, it is not possible to construct a triangle with lengths of its sides as 4 cm, 3 cm and 7 cm because here we see that sum of the lengths of two sides is equal to third side i.e., 4+3 ... , the sum of any two sides of a triangle is greater than its third side, so given statement is not correct.
Description : Construct a triangle whose sides are 3.6 cm , 3.0 cm and 4. 8 cm. Bisect the smallest angle and .measure each part. -Maths 9th
Last Answer : To construct a triangle ABC in which AB = 3.6 cm, AC = 3.0 cm and BC = 4. 8 cm, use the following steps. Draw a line segment BC of length 4.8 cm. From B, point A is at a distance of 3.6 cm. ... at P. Joining BP, we obtain angle bisector of ∠B. Flere, ∠ABC=39° Thus, ∠ABD = ∠DBC = ½ x 139° = 19.5°
Description : Construct a square of side 3 cm. -Maths 9th
Last Answer : Steps of construction : 1. Take AB = 3cm . 2. At A , draw AY ⊥ AB. 3. With A as center and radius = 3cm , describe an arc cutting AY at D. 4. With B and D as centers and radii equal to 3cm , draw arcs intersecting at C. 5. Join BC and DC . ABCD is the required square .
Description : Construct a rectangle whose adjacent sides are of lengths 5 cm and 3.5 cm. -Maths 9th
Last Answer : We know that, each angle of a rectangle is right angle (i.e., 90°) and its opposite sides are equal and parallel. To construct a rectangle whose adjacent sides are of lengths 5 cm and 3.5 cm, use the ... AD and CD. Thus, ABCD is the required rectangle with adjacent sides of length 5 cm and 3.5 cm.
Description : Construct an equilateral triangle whose altitude is 7 cm -Maths 9th
Last Answer : NEED ANSWER
Last Answer : To construct a triangle ABC in which AB = 3.6 cm, AC = 3.0 cm and BC = 4. 8 cm, use the following steps. 1.Draw a line segment BC of length 4.8 cm. 2.From B, point A is at a distance of 3.6 ... 3.Joining BP, we obtain angle bisector of ∠B. 4.Flere, ∠ABC=39° Thus, ∠ABD = ∠DBC = 1/2 x 139° = 19.5°
Last Answer : We know that, each angle of a square is right angle (i.e., 90°). To construct a square of side 3 cm, use the following steps. 1.Draw a line segment AS of length 3 cm. 2.Now, generate an angle of 90° ... (obtained in step iv) at C. 6.Join DC and BC. Thus, ABCD is the required square of side 3 cm.
Last Answer : This answer was deleted by our moderators...