Description : The nominal thickness of one brick wall in mm, is (A) 90 mm (B) 150 mm (C) 190 mm (D) 200 mm
Last Answer : Answer: Option D
Description : Which one of the following activities is not correct as applicable to brick corbels? (A) The maximum projection of the corbel should not be more than the thickness of the wall (B) The ... to carry heavy concentrated loads (D) Stretcher bond is generally used for the construction of brick corbel
Description : Pick up the correct statement from the following: (A) English bond is used for brick masonry to support heavy loads (B) Double-Flemish bond is suitable for brick masonry to give uniform face ... The stretcher bond is used for the construction of half brick masonry brick (D) All the above
Description : The type of bond in a brick masonry containing alternate courses of stretchers and headers, is called (A) Flemish bond (B) English bond (C) Stretcher bond (D) Header bond
Last Answer : Answer: Option B
Description : The nominal size of the modular brick is (A) 190 mm × 90 mm × 80 mm (B) 190 mm × 190 mm × 90 mm (C) 200 mm × 100 mm × 100 mm (D) 200 mm × 200 mm × 100 mm
Last Answer : Answer: Option C
Description : The bond in which headers and stretchers are laid in alternate courses and every stretcher course is started with a three fourth brick bat, is known as (A) English cross bond (B) Dutch bond (C) Monk bond (D) Rat-trap bond
Last Answer : : Option B
Description : The brick laid with its length parallel to the face of a wall, is a known as (A) Header (B) Stretcher (C) Closer (D) None of the
Description : The brick laid with its breadth parallel to the face of a wall, is known as (A) Header (B) Stretcher (C) Closer (D) None of these
Last Answer : Answer: Option A
Description : The 9 cm × 9 cm side of a brick as seen in the wall face, is generally known as (A) Stretcher (B) Face (C) Front (D) Heade
Description : To stagger vertical joints in successive courses of a wall, a piece of brick is generally used at the end of the course, which is known as (A) Bat (B) Header (C) Stretcher (D) Closer
Description : The 19 cm × 9 cm side of a brick as seen in the wall face, is generally known as (A) Stretcher (B) Face (C) Front (D) Header
Description : Minimum thickness of wall where single Flemish bond can be used is (A) Half brick thick (B) One brick thick (C) One and a half bricks thick (D) Two bricks thick
Description : In brick masonry the bond produced by laying alternate headers and stretchers in each course is known as (A) English bond (B) Double Flemish bond (C) Zigzag bond (D) Single Flemish bond
Description : The type of bond provided in brick masonry for carrying heavy loads is (A) Single Flemish bond (B) Double Flemish bond (C) English bond (D) Zigzag bond
Description : The type of ashlar masonry in which stones are finely chisel dressed and thickness of joints does not exceed 3 mm, is (A) Chamfered ashlar masonry (B) Ashlar facing masonry (C) Random coursed ashlar masonry (D) Coursed ashlar masonry
Description : Pick up the correct statement from the following: (A) The breakwater which can be used as a platform for loading and unloading of cargo is called a mole (B) The brick masonry retaining wall which is ... wall (C) Three types of break waters are generally provided in harbours (D) All of the above
Last Answer : (D) All of the above
Description : Find the correct statement from the followings. (a) For a cantilever slab, the ratio of span to overall depth should not 12. (b) One way slab which carry uniformly distributed load should be designed to ... be designed to resist a hogging moment at the face of the support. (d) All of the above.
Last Answer : (d) All of the above.
Description : To construct a 10 cm thick partition wall, you will prefer (A) English bond (B) Flemish bond (C) Header bond (D) Stretcher bond
Description : The nominal thickness of an expansion joint in brick walls, is kept more than (A) 5 mm (B) 10 mm (C) 15 mm (D) 20 mm
Description : Queen closer may be placed (A) In header course (B) In stretcher course (C) In header course next to first brick (D) In stretcher course next to first brick
Description : The difference in the reservoir level and the lowest point of the water mains is 180 m. The expected pressure due to water hammer is 7.5 kg/cm2 in a pressure conduit of diameter 1 m. Assuming the efficiency of the ... , is (A) 10 mm (B) 15 mm (C) 20 mm (D) 25 mm
Last Answer : (C) 20 mm
Description : Herringbone bond is used for (A) Walls having thickness more than 4 bricks (B) Architectural finish to the face work (C) Ornamental panels in brick flooring (D) All the above
Description : Pick up the correct statement from the following: (A) A mortar joint having a concave finishing in brick masonry, is called keyed joint (B) A mortar joint projecting beyond the face of a masonry wall, is ... (C) A mortar joint having a recess in it, is called ruled joint (D) All the above
Last Answer : Option D
Description : Draw a neat labeled sectional view showing different components of building from foundation to parapet, for a load bearing brick masonry wall.
Last Answer : Draw a neat labeled sectional view showing different components of building from foundation to parapet, for a load bearing brick masonry wall.
Description : Which one of the following statements is correct regarding blood pressure? (a) 130/90 mm Hg is considered high and requires treatment. (b) 100/55 mm Hg is considered an ideal blood pressure. (c) 105/50 mm Hg makes one very active. (d) 190/110 mm Hg may harm vital organs like brain and kidney.
Last Answer : d) 190/110 mm Hg may harm vital organs like brain and kidney.
Description : Brick walls are measured in sq. m if the thickness of the wall is (A) 10 cm (B) 15 cm (C) 20 cm (D) None of these
Last Answer : (A) 10 cm
Description : The thickness of a reinforced brick partition wall, is generally kept (A) 5 cm (B) 10 cm (C) 15 cm (D) 20 cm
Description : As compared to stretcher course, the thickness of joints in header course should be (A) Less (B) More (C) Equal (D) Equal or more
Last Answer : Option A
Description : The low water datum for a lake is defined as the surface of the lake when it is at elevation (A) 180.5 m above M.S.L. (B) 190.5 m above M.S.L. (C) 170.5 m above M.S.L. (D) 200.0 m above M.S.L.
Last Answer : (A) 180.5 m above M.S.L.
Description : Stucco paints are suitable for (A) Stone masonry (B) Brick walls (C) Both (A) and (B) (D) Neither (A) nor (B)
Description : The frog of the brick in a brick masonry is generally kept on (A) Bottom face (B) Top face (C) Shorter side (D) Longer side
Description : For one cubic metre of brick masonry, number of bricks required, is (A) 400 (B) 425 (C) 450 (D) 500
Description : Number of bricks required for one cubic metre of brick masonry is (A) 400 (B) 450 (C) 500 (D) 550
Description : The strength of brick masonry in 1:6 cement mortar, is (A) 20 tonnes/m2 (B) 40 tonnes/m2 (C) 50 tonnes/m2 (D) 60 tonnes/m
Description : To obtain good bonding in brick masonry (A) First class bricks are used (B) Vertical joints in alternate courses are kept in plumb line (C) Bats are used where necessary (D) All the above
Description : The minimum strength of the mortar used in load bearing brick masonry, is (A) 50 N/cm2 (B) 100 N/cm2 (C) 150 N/cm2 (D) 200 N/cm2
Description : The position of the neutral axis in reinforced brick masonry is independent of the loading and is at a depth of
Last Answer : (a) One-third of the effective depth
Description : Pick up the incorrect statement from the following: (A) In Flemish bond, headers and stretchers are laid alternately in the same course (B) In Flemish bond every header in each course lies ... laid in every course (D) In English bond, headers and stretchers are laid in alternate courses
Description : Single Flemish bond consists of (A) Double Flemish bond facing and English bond backing in each course (B) English bond facing and double Flemish bond backing in each course (C) Stretcher bond ... bond backing in each course (D) Double Flemish bond facing and header bond backing in each course
Description : Dutch bond is a modification of (A) English bond (B) Stretcher bond (C) Header bond (D) Single Flemish bon
Description : The type of pointing in which upper side of mortar joints is kept about 12 mm inside the face of the masonry and bottom is kept flushed with face of wall, is (A) Truck pointing (B) Recessed pointing (C) Struck pointing (D) Grooved pointing
Last Answer : Option C
Description : Minimum thickness of load bearing RCC wall should be (A) 50 mm (B) 100 mm (C) 150 mm (D) 200 mm
Last Answer : (B) 100 mm
Description : A furnace is made of a refractory brick wall of thickness 0.5 metre and thermal conductivity 0.7 W/m.°K For the same temperature drop and heat loss, this refractory wall can be replaced by a layer of diatomaceous earth of ... and thickness __________ metre. (A) 0.01 (B) 0.1 (C) 0.25 (D) 0.5
Last Answer : (B) 0.1
Description : The International union of Railways, international body of the Rail transport industry consists of how many members? A. 190 members B. 194 members C. 180 member D. 184 members
Last Answer : B [194 members] Explanation: The International union of railways is an international body of rail transport of India created on 17 October 1922. It has 194 members across 5 continents.
Description : The life span of RBC of man is - (1) 120 days (2) 150 days (3) 180 days (4) 190 days
Last Answer : (2) 150 days Explanation: The average life span of RBC is about 100-120 days. The old, worn out and dead RBC are destroyed mainly in an organ called spleen.
Description : Weight of one cotton bale is (A)170 Kg (B) 160 Kg (C) 180 Kg (D) 190 Kg
Last Answer : (A)170 Kg
Description : Blu Ray Technology was developed by Blu-ray Disc Association with more than ____members: a) 180 b) 190 c) 210 d) None of These
Last Answer : a) 180
Description : The volume of a gas under standard atmospheric pressure & 76 cmHg is 200m³. What is the volume when pressure is 80 cmHg if the temperature is unchanged? a) 180 in³ b) 170 in³ c) 160 in³ d) 190 in³ Formula: P2V2 = P1V1
Last Answer : 190 in³
Description : What is the annual future earnings of the AZ Ltd. using ‘Capitalization of Earning Method’? a) Rs.150 crore b) Rs.180 crore c) Rs.200 crore d) Rs.190 crore
Last Answer : c) Rs.200 crore
Description : The life span of RBC of man is (1) 120 days (2) 150 days (3) 180 days (4) 190 days
Last Answer : 150 days