In brick masonry the bond produced by laying alternate headers and stretchers in each course is known as (A) English bond (B) Double Flemish bond (C) Zigzag bond (D) Single Flemish bond

In brick masonry the bond produced by laying alternate headers and stretchers in each course is
known as
(A) English bond
(B) Double Flemish bond
(C) Zigzag bond
(D) Single Flemish bond
by

1 Answer

Answer :

Answer: Option B
by

Related questions

The type of bond in a brick masonry containing alternate courses of stretchers and headers, is called (A) Flemish bond (B) English bond (C) Stretcher bond (D) Header bond

Description : The type of bond in a brick masonry containing alternate courses of stretchers and headers, is called (A) Flemish bond (B) English bond (C) Stretcher bond (D) Header bond

Last Answer : Answer: Option B

Pick up the incorrect statement from the following: (A) In Flemish bond, headers and stretchers are laid alternately in the same course (B) In Flemish bond every header in each course lies centrally over every stretcher of the underlying course (C) In English bond, stretchers are laid in every course (D) In English bond, headers and stretchers are laid in alternate courses

Description : Pick up the incorrect statement from the following: (A) In Flemish bond, headers and stretchers are laid alternately in the same course (B) In Flemish bond every header in each course lies ... laid in every course (D) In English bond, headers and stretchers are laid in alternate courses

Last Answer : Answer: Option C

The type of bond provided in brick masonry for carrying heavy loads is (A) Single Flemish bond (B) Double Flemish bond (C) English bond (D) Zigzag bond

Description : The type of bond provided in brick masonry for carrying heavy loads is (A) Single Flemish bond (B) Double Flemish bond (C) English bond (D) Zigzag bond

Last Answer : Answer: Option C

The bond in which headers and stretchers are laid in alternate courses and every stretcher course is started with a three fourth brick bat, is known as (A) English cross bond (B) Dutch bond (C) Monk bond (D) Rat-trap b

Description : The bond in which headers and stretchers are laid in alternate courses and every stretcher course is started with a three fourth brick bat, is known as (A) English cross bond (B) Dutch bond (C) Monk bond (D) Rat-trap bond

Last Answer : : Option B

The type of bond in which every course contains both headers and stretchers, is called (A) English bond (B) Flemish bond (C) Russian band (D) Mixed bond

Description : The type of bond in which every course contains both headers and stretchers, is called (A) English bond (B) Flemish bond (C) Russian band (D) Mixed bond

Last Answer : Answer: Option B

Pick up the correct statement from the following: (A) English bond is used for brick masonry to support heavy loads (B) Double-Flemish bond is suitable for brick masonry to give uniform face appearance (C) The stretcher bond is used for the construction of half brick masonry brick (D) All the above

Description : Pick up the correct statement from the following: (A) English bond is used for brick masonry to support heavy loads (B) Double-Flemish bond is suitable for brick masonry to give uniform face ... The stretcher bond is used for the construction of half brick masonry brick (D) All the above

Last Answer : Answer: Option D

Brick nogging type of partition wall, is constructed by (A) Laying bricks as stretchers in cement mortar (B) Laying bricks as headers in cement mortar (C) Reinforcing brick wall with iron straps (D) Constructing brick work within a wooden framework

Description : Brick nogging type of partition wall, is constructed by (A) Laying bricks as stretchers in cement mortar (B) Laying bricks as headers in cement mortar (C) Reinforcing brick wall with iron straps (D) Constructing brick work within a wooden framework

Last Answer : Answer: Option D

In English garden wall bond (A) One course of headers to three or five course of stretchers (B) Queen closer in provided in each heading course (C) The middle course of stretchers is started with a header to give proper vertical joints (D) All the above

Description : In English garden wall bond (A) One course of headers to three or five course of stretchers (B) Queen closer in provided in each heading course (C) The middle course of stretchers is started with a header to give proper vertical joints (D) All the above

Last Answer : Answer: Option D

Single Flemish bond consists of (A) Double Flemish bond facing and English bond backing in each course (B) English bond facing and double Flemish bond backing in each course (C) Stretcher bond facing and double Flemish bond backing in each course (D) Double Flemish bond facing and header bond backing in each course

Description : Single Flemish bond consists of (A) Double Flemish bond facing and English bond backing in each course (B) English bond facing and double Flemish bond backing in each course (C) Stretcher bond ... bond backing in each course (D) Double Flemish bond facing and header bond backing in each course

Last Answer : Answer: Option A

Which of the following should be used for hearting of thicker walls? (A) Headers (B) Stretchers (C) Brick bats (D) Queen closer

Description : Which of the following should be used for hearting of thicker walls? (A) Headers (B) Stretchers (C) Brick bats (D) Queen closer

Last Answer : Answer: Option A

Minimum thickness of wall where single Flemish bond can be used is (A) Half brick thick (B) One brick thick (C) One and a half bricks thick (D) Two bricks thick

Description : Minimum thickness of wall where single Flemish bond can be used is (A) Half brick thick (B) One brick thick (C) One and a half bricks thick (D) Two bricks thick

Last Answer : Answer: Option C

To obtain good bonding in brick masonry (A) First class bricks are used (B) Vertical joints in alternate courses are kept in plumb line (C) Bats are used where necessary (D) All the above

Description : To obtain good bonding in brick masonry (A) First class bricks are used (B) Vertical joints in alternate courses are kept in plumb line (C) Bats are used where necessary (D) All the above

Last Answer : Option D

As compared to English bond, double Flemish bond is (A) Stronger (B) More compact (C) Costly (D) None of the

Description : As compared to English bond, double Flemish bond is (A) Stronger (B) More compact (C) Costly (D) None of these

Last Answer : Answer: Option B

Dutch bond is a modification of (A) English bond (B) Stretcher bond (C) Header bond (D) Single Flemish bon

Description : Dutch bond is a modification of (A) English bond (B) Stretcher bond (C) Header bond (D) Single Flemish bon

Last Answer : Answer: Option A

The stretcher bond in brick masonry can be used only when the thickness of wall is (A) 90 mm (B) 180 mm (C) 190 mm (D) 280 mm

Description : The stretcher bond in brick masonry can be used only when the thickness of wall is (A) 90 mm (B) 180 mm (C) 190 mm (D) 280 mm

Last Answer : Answer: Option A

To construct a 10 cm thick partition wall, you will prefer (A) English bond (B) Flemish bond (C) Header bond (D) Stretcher bond

Description : To construct a 10 cm thick partition wall, you will prefer (A) English bond (B) Flemish bond (C) Header bond (D) Stretcher bond

Last Answer : Answer: Option D

The method of moving each brick through a small horizontal distance before it is finally laid in any brick wall and pressing it by means of brick hammer, is known as (A) Trowelling (B) Laying (C) Grouting (D) Placing

Description : The method of moving each brick through a small horizontal distance before it is finally laid in any brick wall and pressing it by means of brick hammer, is known as (A) Trowelling (B) Laying (C) Grouting (D) Placing

Last Answer : Answer: Option B

Which one of the following activities is not correct as applicable to brick corbels? (A) The maximum projection of the corbel should not be more than the thickness of the wall (B) The maximum projection of each corbel course should be limited to a quarter brick at a time (C) The discontinuous corbels are used to carry heavy concentrated loads (D) Stretcher bond is generally used for the construction of brick corbel

Description : Which one of the following activities is not correct as applicable to brick corbels? (A) The maximum projection of the corbel should not be more than the thickness of the wall (B) The ... to carry heavy concentrated loads (D) Stretcher bond is generally used for the construction of brick corbel

Last Answer : Answer: Option D

Describe in brief with neat sketch: i) English bond ii) Flemish bond

Description : Describe in brief with neat sketch: i) English bond ii) Flemish bond

Last Answer : English bond : The Bond with alternate courses of headers and stretchers with a closer placed next to quoin header is called as the English Bond. Points Should be Remembered for English bond: 1. A ... . 4. Flemish Bond is slightly economical as a number of brick bats can be used.

Pick up the correct statement from the following: (A) The breakwater which can be used as a platform for loading and unloading of cargo is called a mole (B) The brick masonry retaining wall which is used for loading and unloading of cargo is called quay wall (C) Three types of break waters are generally provided in harbours (D) All of the above

Description : Pick up the correct statement from the following: (A) The breakwater which can be used as a platform for loading and unloading of cargo is called a mole (B) The brick masonry retaining wall which is ... wall (C) Three types of break waters are generally provided in harbours (D) All of the above

Last Answer : (D) All of the above

Stucco paints are suitable for (A) Stone masonry (B) Brick walls (C) Both (A) and (B) (D) Neither (A) nor (B)

Description : Stucco paints are suitable for (A) Stone masonry (B) Brick walls (C) Both (A) and (B) (D) Neither (A) nor (B)

Last Answer : Answer: Option C

The frog of the brick in a brick masonry is generally kept on (A) Bottom face (B) Top face (C) Shorter side (D) Longer side

Description : The frog of the brick in a brick masonry is generally kept on (A) Bottom face (B) Top face (C) Shorter side (D) Longer side

Last Answer : Answer: Option B

For one cubic metre of brick masonry, number of bricks required, is (A) 400 (B) 425 (C) 450 (D) 500

Description : For one cubic metre of brick masonry, number of bricks required, is (A) 400 (B) 425 (C) 450 (D) 500

Last Answer : Answer: Option D

Number of bricks required for one cubic metre of brick masonry is (A) 400 (B) 450 (C) 500 (D) 550

Description : Number of bricks required for one cubic metre of brick masonry is (A) 400 (B) 450 (C) 500 (D) 550

Last Answer : Answer: Option C

The strength of brick masonry in 1:6 cement mortar, is (A) 20 tonnes/m2 (B) 40 tonnes/m2 (C) 50 tonnes/m2 (D) 60 tonnes/m

Description : The strength of brick masonry in 1:6 cement mortar, is (A) 20 tonnes/m2 (B) 40 tonnes/m2 (C) 50 tonnes/m2 (D) 60 tonnes/m

Last Answer : Answer: Option C

The minimum strength of the mortar used in load bearing brick masonry, is (A) 50 N/cm2 (B) 100 N/cm2 (C) 150 N/cm2 (D) 200 N/cm2

Description : The minimum strength of the mortar used in load bearing brick masonry, is (A) 50 N/cm2 (B) 100 N/cm2 (C) 150 N/cm2 (D) 200 N/cm2

Last Answer : : Option B

The position of the neutral axis in reinforced brick masonry is independent of the loading and is at a depth of

Description : The position of the neutral axis in reinforced brick masonry is independent of the loading and is at a depth of

Last Answer : (a) One-third of the effective depth

Find the correct statement from the followings. (a) For a cantilever slab, the ratio of span to overall depth should not 12. (b) One way slab which carry uniformly distributed load should be designed to resist a sagging bending moment near mid-span. (c) When the slab is built into a brick or masonry wall the slab should be designed to resist a hogging moment at the face of the support. (d) All of the above.

Description : Find the correct statement from the followings. (a) For a cantilever slab, the ratio of span to overall depth should not 12. (b) One way slab which carry uniformly distributed load should be designed to ... be designed to resist a hogging moment at the face of the support. (d) All of the above.

Last Answer : (d) All of the above.

The most important tool in brick laying for lifting and spreading mortar and for forming joints is (A) Trowel (B) Square (C) Bolster (D) Scutch

Description : The most important tool in brick laying for lifting and spreading mortar and for forming joints is (A) Trowel (B) Square (C) Bolster (D) Scutch

Last Answer : Answer: Option A

The type of stone masonry in which stones of same height are laid in layers, is called (A) Random rubble masonry (B) Course rubble masonry (C) Uncoursed rubble masonry (D) Ashlar masonry

Description : The type of stone masonry in which stones of same height are laid in layers, is called (A) Random rubble masonry (B) Course rubble masonry (C) Uncoursed rubble masonry (D) Ashlar masonry

Last Answer : Answer: Option B

Aqueous nitric acid is stored in (A) Steel drum (B) Stainless steel vessel (C) Cast iron vessel lined with acid-proof masonry brick (D) Cast iron vessel

Description : Aqueous nitric acid is stored in (A) Steel drum (B) Stainless steel vessel (C) Cast iron vessel lined with acid-proof masonry brick (D) Cast iron vessel

Last Answer : (B) Stainless steel vessel

Pick up the correct statement from the following: (A) A mortar joint having a concave finishing in brick masonry, is called keyed joint (B) A mortar joint projecting beyond the face of a masonry wall, is called tucked joint (C) A mortar joint having a recess in it, is called ruled joint (D) All the above

Description : Pick up the correct statement from the following: (A) A mortar joint having a concave finishing in brick masonry, is called keyed joint (B) A mortar joint projecting beyond the face of a masonry wall, is ... (C) A mortar joint having a recess in it, is called ruled joint (D) All the above

Last Answer : Option D

Number of bricks required for 1 cubic meter of brick masonry is a)400 b) 450 c) 500* d) 550

Description : Number of bricks required for 1 cubic meter of brick masonry is a)400 b) 450 c) 500* d) 550

Last Answer : c) 500*

Differentiate between brick masonry and stone masonry

Description : Differentiate between brick masonry and stone masonry

Last Answer : Sr. no. Brick masonry Stone masonry 1 It is cheaper than stone masonry It is stronger than Brick masonry 2 It is cheaper in places where clay is available It is ... easy to apply any finishing to Brick surface. It is difficult to apply any finishing to stone surface

As a ‘Supervisor’, state precautionary measures you will observe while constructing brick masonry, along with their reasons.

Description : As a ‘Supervisor’, state precautionary measures you will observe while constructing brick masonry, along with their reasons.

Last Answer : Following Precautionary measures are to be observe as a supervisor while constructing brick masonry: 1. Bricks should be as per the specification. The bricks should be well burnt, reddish in colour, sound and hard ... is used and for a period of about one to two weeks, if cement mortar is used.

Draw a neat labeled sectional view showing different components of building from foundation to parapet, for a load bearing brick masonry wall.

Description : Draw a neat labeled sectional view showing different components of building from foundation to parapet, for a load bearing brick masonry wall.

Last Answer : Draw a neat labeled sectional view showing different components of building from foundation to parapet, for a load bearing brick masonry wall.

Compare stone masonry construction with brick masonry construction.

Description : Compare stone masonry construction with brick masonry construction.

Last Answer : STONE MASONRY  BRICK MASONRY 1. Stone masonry is stronger and more durable than brick masonry 1. Brick masonry is less stronger and less durable than stone masonry. 2. ... other hand is considered unsuitable in the construction of piers, docks, dams and other marine structure.

Compare brick masonry and stone masonry used in building construction.

Description : Compare brick masonry and stone masonry used in building construction.

Last Answer : Sr. No. Brick Masonry Stone Masonry 1 It is less stronger than stone masonry. It is stronger than brick masonry. 2 It is cheaper in places where clay is available ... is used Double scaffolding is used 12 Plastering is required  Plastering is not required

To stagger vertical joints in successive courses of a wall, a piece of brick is generally used at the end of the course, which is known as (A) Bat (B) Header (C) Stretcher (D) Closer

Description : To stagger vertical joints in successive courses of a wall, a piece of brick is generally used at the end of the course, which is known as (A) Bat (B) Header (C) Stretcher (D) Closer

Last Answer : Answer: Option D

Queen closer may be placed (A) In header course (B) In stretcher course (C) In header course next to first brick (D) In stretcher course next to first brick

Description : Queen closer may be placed (A) In header course (B) In stretcher course (C) In header course next to first brick (D) In stretcher course next to first brick

Last Answer : Answer: Option C

Herringbone bond is used for (A) Walls having thickness more than 4 bricks (B) Architectural finish to the face work (C) Ornamental panels in brick flooring (D) All the above

Description : Herringbone bond is used for (A) Walls having thickness more than 4 bricks (B) Architectural finish to the face work (C) Ornamental panels in brick flooring (D) All the above

Last Answer : Answer: Option D

What are alkenes having two double bonds separated by one single bond known as?

Description : What are alkenes having two double bonds separated by one single bond known as?

Last Answer : ANSWER: CONJUGATED DIENES 

A mortar joint in masonry which is normal to the face of wall is known as (A) Bed joint (B) Wall joint (C) Cross joint (D) Bonded join

Description : A mortar joint in masonry which is normal to the face of wall is known as (A) Bed joint (B) Wall joint (C) Cross joint (D) Bonded join

Last Answer : Answer: Option C

Why are headers and footers used in the document: a) To mark the starting and ending of the page b) To allow page headers & footers to appear on document when it is printed c) To enhance the overall appearance of the document d) Each page of word must have header & footer. e) None of The Above

Description : Why are headers and footers used in the document: a) To mark the starting and ending of the page b) To allow page headers & footers to appear on document when it is printed c) To enhance the overall appearance of the document d) Each page of word must have header & footer. e) None of The Above

Last Answer : b) To allow page headers & footers to appear on document when it is printed

Refer to CAP697 MRJT1 Fig. 4.3.1 Given: Estimated zero fuel mass 50t; estimated landing mass at destination 52t; final reserve fuel 2t; alternate fuel 1t; flight to destination distance 720nm, true course 030, W/V 340/30; cruise: LRC, at FL330 outside air temperature -30C. Find estimated trip fuel and time. a. 4,800kg / 01hr 45min b. 4,400kg / 02hr 02min c. 4,750kg / 02hr 00min d. 4,600kg / 02hr 05min

Description : Refer to CAP697 MRJT1 Fig. 4.3.1 Given: Estimated zero fuel mass 50t; estimated landing mass at destination 52t; final reserve fuel 2t; alternate fuel 1t; flight to destination distance 720nm, true course 030, W/V ... b. 4,400kg / 02hr 02min c. 4,750kg / 02hr 00min d. 4,600kg / 02hr 05min

Last Answer : a. 4,800kg / 01hr 45min

Ever wonder what the lightning speed would be if it didn't zigzag?

Description : Ever wonder what the lightning speed would be if it didn't zigzag?

Last Answer : It travels at 93,000 miles per second whether it zig zags or not.

In laminated object manufacturing (LOM), which of the following cutting strategy ispreferable? a.Directional scanning b.Zigzag tool paths c.Contouring and spiral paths d.Boundary cutting tool paths

Description : In laminated object manufacturing (LOM), which of the following cutting strategy ispreferable? a.Directional scanning b.Zigzag tool paths c.Contouring and spiral paths d.Boundary cutting tool paths

Last Answer : d.Boundary cutting tool paths

Who attacked zigzag when he was beating up stanly?

Description : Who attacked zigzag when he was beating up stanly?

Last Answer : Zero attacks ZigZag when he is beating up Stanley.

What does zigzag mean ?

Description : What does zigzag mean ?

Last Answer : Zigzag means crooked.

The shape of the Himalayas is like (a) A straight line (b) An arc (c) A zigzag line (d) A spiral

Description : The shape of the Himalayas is like (a) A straight line (b) An arc (c) A zigzag line (d) A spiral

Last Answer : Ans: (b)