Glazing of clay products, is done (A) To improve their appearance (B) To protect them from atmospheric effect (C) To protect them from corrosive action (D) All the above

Glazing of clay products, is done
(A) To improve their appearance
(B) To protect them from atmospheric effect
(C) To protect them from corrosive action
(D) All the above
by

1 Answer

Answer :

Answer: Option D
by

Related questions

Galvanising (i.e., zinc coating) of steel sheets is done to (A) Prevent its rusting by contact with corrosive atmosphere (B) Protect the base metal by cathodic protection (C) Both (A) & (B) (D) Neither (A) nor (B)

Description : Galvanising (i.e., zinc coating) of steel sheets is done to (A) Prevent its rusting by contact with corrosive atmosphere (B) Protect the base metal by cathodic protection (C) Both (A) & (B) (D) Neither (A) nor (B)

Last Answer : (C) Both (A) & (B)

____ is done by dipping the fish in cold water and then freezing a layer before dipping the fish again. a. Cleaning c. Glazing b. Skinning d. Dressing

Description : ____ is done by dipping the fish in cold water and then freezing a layer before dipping the fish again. a. Cleaning c. Glazing b. Skinning d. Dressing

Last Answer : c. Glazing

The item of steel work which is measured in sq.m, is (A) Collapsible gates (B) Rolling shutters (C) Ventilators and glazing (D) All the above

Description : The item of steel work which is measured in sq.m, is (A) Collapsible gates (B) Rolling shutters (C) Ventilators and glazing (D) All the above

Last Answer : (D) All the above

Pick up the correct statement from the following: (A) Pointing is measured in sq.m (B) Plastering is measured in sq.m (C) Glazing is measured in sq.m (D) All the above

Description : Pick up the correct statement from the following: (A) Pointing is measured in sq.m (B) Plastering is measured in sq.m (C) Glazing is measured in sq.m (D) All the above

Last Answer : (D) All the above

Glazing is used to make earthenware (A) Hard (B) Soft (C) Porous (D) Impervious

Description : Glazing is used to make earthenware (A) Hard (B) Soft (C) Porous (D) Impervious

Last Answer : Answer: Option D

For sanitary pipes and chemical stonewares, (A) Salt glazing is used (B) Lead glazing is used (C) Opaque glazing is used (D) None of thes

Description : For sanitary pipes and chemical stonewares, (A) Salt glazing is used (B) Lead glazing is used (C) Opaque glazing is used (D) None of these

Last Answer : Answer: Option A

The consumer movement is 1. against foreign imports that are much cheaper than products produced in the home market 2. a movemnt that is trying to improve consumer satisfaction 3. a social movment that is able to challenge big business practices 4. a diverse group of individuals, groups and organizations attempting to protect the rights of consumers 5. none of these

Description : The consumer movement is 1. against foreign imports that are much cheaper than products produced in the home market 2. a movemnt that is trying to improve consumer satisfaction 3. a ... individuals, groups and organizations attempting to protect the rights of consumers 5. none of these

Last Answer : a diverse group of individuals, groups and organizations attempting to protect the rights of consumers

Like New Pr Like New Products w oducts wants to i ants to improve its pack ve its packaging aft aging after readi er reading custo ng customer res mer responses t ponses to its customer its customer opinion poll. opinion poll. Which is not Which is not a function of a function of packaging? packaging? a. Its purpose is to c e is to contain and protect the product. b. It contains the brand mark. It contains the brand mark. c. It protects children. d. It determines product quality.

Description : Like New Pr Like New Products w oducts wants to i ants to improve its pack ve its packaging aft aging after readi er reading custo ng customer res mer responses t ponses to its customer its ... brand mark. It contains the brand mark. c. It protects children. d. It determines product quality.

Last Answer : d. It determines product quality.

he consumer movement is: A)against foreign imports that are much cheaper than products produced in the home market B)a movement that is trying to improve consumer satisfaction C)a social movement that is able to challenge big business practices D)a diverse group of individuals, groups and organisations attempting to protect the rights of consumers

Description : he consumer movement is: A)against foreign imports that are much cheaper than products produced in the home market B)a movement that is trying to improve consumer satisfaction C)a ... D)a diverse group of individuals, groups and organisations attempting to protect the rights of consumers

Last Answer : D)a diverse group of individuals, groups and organisations attempting to protect the rights of consumers

Silicone rubber is not resistant to the corrosive action of (A) Sulphuric acid (10%) (B) Sulphuric acid (95%) (C) Ether (D) Both (B) and (C)

Description : Silicone rubber is not resistant to the corrosive action of (A) Sulphuric acid (10%) (B) Sulphuric acid (95%) (C) Ether (D) Both (B) and (C)

Last Answer : (D) Both (B) and (C)

The damage/deterioration of metals by the __________ action of fluids is called 'erosion'. (A) Abrasive (B) Corrosive (C) Both (A) & (B) (D) Neither (A) nor (B)

Description : The damage/deterioration of metals by the __________ action of fluids is called 'erosion'. (A) Abrasive (B) Corrosive (C) Both (A) & (B) (D) Neither (A) nor (B)

Last Answer : (A) Abrasive

Dielectric (A) Is an electrical insulating material (B) Of low resistivity is preferred (C) Should have high thermal conductivity (D) Need not defy the corrosive action of chemicals

Description : Dielectric (A) Is an electrical insulating material (B) Of low resistivity is preferred (C) Should have high thermal conductivity (D) Need not defy the corrosive action of chemicals

Last Answer : (A) Is an electrical insulating material

Which one of the following has most corrosive effect? (1) Air (2) Carbon dioxide (3) Plants (4) Water

Description : Which one of the following has most corrosive effect? (1) Air (2) Carbon dioxide (3) Plants (4) Water

Last Answer : (4) Water Explanation: Common corrosives are either strong acids, strong bases, or concentrated solutions of certain weak acids or weak bases.

Multiple effect evaporation is generally recommended, when the (A) Large scale evaporation of liquor is needed (B) Corrosive liquids are to be concentrated

Description : Multiple effect evaporation is generally recommended, when the (A) Large scale evaporation of liquor is needed (B) Corrosive liquids are to be concentrated

Last Answer : (A) Large scale evaporation of liquor is needed

Pumping of a corrosive liquid is generally preferred to be done by a __________ pump, as it can be made of a variety of materials including plastics. (A) Piston (B) Gear (C) Positive displacement (D) Sump

Description : Pumping of a corrosive liquid is generally preferred to be done by a __________ pump, as it can be made of a variety of materials including plastics. (A) Piston (B) Gear (C) Positive displacement (D) Sump

Last Answer : (B) Gear

Loess' is silty clay formed by the action of (A) Water (B) Glacier (C) Wind (D) Gravitational force

Description : Loess' is silty clay formed by the action of (A) Water (B) Glacier (C) Wind (D) Gravitational force

Last Answer : (C) Wind

Good quality stones must (A) Be durable (B) Be free from clay (C) Resist action of acids (D) All the above

Description : Good quality stones must (A) Be durable (B) Be free from clay (C) Resist action of acids (D) All the above

Last Answer : Answer: Option D

Mastic asphalt is (A) Acid resisting material (B) Non-corrosive material (C) Corrosive material (D) Heating-resisting material

Description : Mastic asphalt is (A) Acid resisting material (B) Non-corrosive material (C) Corrosive material (D) Heating-resisting material

Last Answer : Answer: Option B

Bitumen emulsion is (A) A liquid containing bitumen in suspension (B) A paint (C) Used as anti-corrosive paint (D) All the above

Description : Bitumen emulsion is (A) A liquid containing bitumen in suspension (B) A paint (C) Used as anti-corrosive paint (D) All the above

Last Answer : Answer: Option D

The pigment used in paints for corrosive resistance, is (A) White lead (B) Ferrous oxide (C) Zinc white (D) Red lead

Description : The pigment used in paints for corrosive resistance, is (A) White lead (B) Ferrous oxide (C) Zinc white (D) Red lead

Last Answer : Answer: Option D

How many coats of glazing can be put on a bisque fired vessel?

Description : How many coats of glazing can be put on a bisque fired vessel?

Last Answer : answer:It depends on the formulation of the glaze and the thickness of the coats. If it's a glaze with a high alumina content that stays put, then you should be fine; a runnier glaze will run even ... too thick, you can always wash it off the bisque, let the bisque dry completely, and start over.

Why is glazing used to make ceramic materials ?

Description : Why is glazing used to make ceramic materials ?

Last Answer : A mixture of ceramic materials is molded into a specific molding of the crossing and after drying in hot air, it is burned and turned into perforated burnt ceramic material or biscuits. In this ... . into a thin glass material. Glazing closes the pores on the surface of the material biscuits.

What is a glazing spline and channel?

Description : What is a glazing spline and channel?

Last Answer : Glazing spine and channel make it easy to choose the correct vinyl need for the application. DKHardware have lots of options for the glazing spine at reasonable cost with multiple options.

What are the merits / advantages of glazing ceramic articles?

Description : What are the merits / advantages of glazing ceramic articles?

Last Answer : a) Glazing plugs the pores present in the baked ceramic articles. b) Glazing provides a smooth, attractive look and bright glossy surface to the articles. c) Glazing provides desired colour to the articles.

Explain glazing of ceramic articles.

Description : Explain glazing of ceramic articles.

Last Answer : Glazing is achieved by addition of suitable fillers. It is fired again to create coloured, smooth surface.

What is glazing of ceramics?

Description : What is glazing of ceramics?

Last Answer : The process of making the clay products into non-porous shining material is called Glazing.

When should metallic framework not be contaminated during the fabrication of a porcelain fused to metal crown: A. Between bisque stage and glazing stage B. Between preheat and opaque stages C. Between opaque and bisque stages D. Between one opaque and two opaque stages

Description : When should metallic framework not be contaminated during the fabrication of a porcelain fused to metal crown: A. Between bisque stage and glazing stage B. Between preheat and opaque stages C. Between opaque and bisque stages D. Between one opaque and two opaque stages

Last Answer : B. Between preheat and opaque stages

Porcelain must not be contaminated by handling between which two stages: A. Pre-soldering and heat treatment B. Heat treatment and opaque /bake/ stages C. Opaque and bisque stages D. Bisque and glazing stages E. First opaque bake and second opaque bake

Description : Porcelain must not be contaminated by handling between which two stages: A. Pre-soldering and heat treatment B. Heat treatment and opaque /bake/ stages C. Opaque and bisque stages D. Bisque and glazing stages E. First opaque bake and second opaque bake

Last Answer : A. Pre-soldering and heat treatment

Would you choose to have elective surgery that could drastically improve your life, yet significantly impact your appearance and lifestyle?

Description : Would you choose to have elective surgery that could drastically improve your life, yet significantly impact your appearance and lifestyle?

Last Answer : I think that I would try the implant so you can see what difference it makes in your life. To your temperament. To your experience of the world around you. If you elected not to attach the device, you could.

Does hair loss treatment improve health as well as appearance?

Description : Does hair loss treatment improve health as well as appearance?

Last Answer : Hair loss treatment varies depending on the reason of thinning hair or hair loss. Fortunately there are several ways for treatment including medicine and surgery.

Can eye cream improve my overall appearance?

Description : Can eye cream improve my overall appearance?

Last Answer : Yes eye cream can improve your appearance, aside from getting rid of bags under your eyes and wrinkles it can soften and smoothen your face. I also found out that eye cream with caffeine in it ... bigarticles.net/Article/Coffee-can-be-Used-in-Eye-Creams-to-Improve-the-Appearance-of-Your-Eyes/411980.

The main factor controlling a decision to increase the occlusal height of teeth for extensive oral reconstruction is whether, A. the inter occlusal distance will be physiologically acceptable after treatment B. there will be sufficient tooth bulk in the abutment teeth for proper retention of the crowns C. at least two third of the original alveolar process will remain for adequate periodontal support D. the aesthetic appearance of the patient will improve sufficiently to warrant the planned reconstruction

Description : The main factor controlling a decision to increase the occlusal height of teeth for extensive oral reconstruction is whether, A. the inter occlusal distance will be physiologically ... the aesthetic appearance of the patient will improve sufficiently to warrant the planned reconstruction

Last Answer : A. the inter occlusal distance will be physiologically acceptable after treatment

The main factor controlling a decision to increase the occlusal height of teeth for extensive oral reconstruction is whether, A. The inter occlusal distance will be physiologically acceptable after treatment B. There will be sufficient tooth bulk in the abutment teeth for proper retention of the crowns C. At least two third of the original alveolar process will remain for adequate periodontal support D. The aesthetic appearance of the patient will improve sufficiently to warrant the planned reconstruction

Description : The main factor controlling a decision to increase the occlusal height of teeth for extensive oral reconstruction is whether, A. The inter occlusal distance will be physiologically ... . The aesthetic appearance of the patient will improve sufficiently to warrant the planned reconstruction

Last Answer : A. The inter occlusal distance will be physiologically acceptable after treatment

Sand is mixed with lime to a) Reduced cost b) Reduced setting time c) Prevent shrinkage and cracking* d) Improve visual appearance

Description : Sand is mixed with lime to a) Reduced cost b) Reduced setting time c) Prevent shrinkage and cracking* d) Improve visual appearance

Last Answer : c) Prevent shrinkage and cracking

Slump test is done for (A) Clay (B) Sand (C) Lime (D) Concrete

Description : Slump test is done for (A) Clay (B) Sand (C) Lime (D) Concrete

Last Answer : Answer: Option D

The reduction of the PH value, by the action of atmospheric carbon dioxide with the alkali of the cement paste is called [ A ] atmospheric corrosion [ B ] chloride corrosion [ C ] oxidation [ D ] carbonation

Description : The reduction of the PH value, by the action of atmospheric carbon dioxide with the alkali of the cement paste is called [ A ] atmospheric corrosion [ B ] chloride corrosion [ C ] oxidation [ D ] carbonation

Last Answer : [ D ] carbonation

The reduction of the PH value, by the action of atmospheric carbon dioxide with the alkali of the cement paste is called [ A ] atmospheric corrosion [ B ] chloride corrosion [ C ] oxidation [ D ] carbonation

Description : The reduction of the PH value, by the action of atmospheric carbon dioxide with the alkali of the cement paste is called [ A ] atmospheric corrosion [ B ] chloride corrosion [ C ] oxidation [ D ] carbonation

Last Answer : [ D ] carbonation

How do I use peat moss to improve my clay soil so that I can grow grass?

Description : How do I use peat moss to improve my clay soil so that I can grow grass?

Last Answer : Need Answer

Sulphur addition in soap is done to (A) Improve the soap texture (B) Cure pimples & dandruff (C) Fasten lather formation (D) Increase its cleansing action

Description : Sulphur addition in soap is done to (A) Improve the soap texture (B) Cure pimples & dandruff (C) Fasten lather formation (D) Increase its cleansing action

Last Answer : (B) Cure pimples & dandruff

Antioxidants are added to rubber to protect it from the attack of light, heat & atmospheric ozone. Which of the following is an antioxidant used in rubber? (A) Carbon (B) Alkylated diphenyl amine (C) Thiokol (D) Magnesium

Description : Antioxidants are added to rubber to protect it from the attack of light, heat & atmospheric ozone. Which of the following is an antioxidant used in rubber? (A) Carbon (B) Alkylated diphenyl amine (C) Thiokol (D) Magnesium

Last Answer : (B) Alkylated diphenyl amine

A close-growing crop, grown primarily to improve and protect the soil from erosion through their ground covering foliage and/or rootmats between periods of regular crop production?

Description : A close-growing crop, grown primarily to improve and protect the soil from erosion through their ground covering foliage and/or rootmats between periods of regular crop production?

Last Answer : Ans.Cover Crops

What products reduce a scar's appearance?

Description : What products reduce a scar's appearance?

Last Answer : Cocoa butter can moisturize the skin and allow the cells to reproduce more rapidly and reduce the appearance of scars. There are also scar specific creams that can help reduce scarring.

How can you exceed your customer's expectations? A. By changing the appearance of the product regularly B. By providing something unique in the way you offer the service, either in the nature of the service or the energy with which you offer it C. By providing huge discounts on your products or services D. By placing reviews prominently on your website

Description : How can you exceed your customer's expectations? A. By changing the appearance of the product regularly B. By providing something unique in the way you offer the service, either in the ... By providing huge discounts on your products or services D. By placing reviews prominently on your website

Last Answer : B. By providing something unique in the way you offer the service, either in the nature of the service or the energy with which you offer it

In the 86th amendment to the Constitution in 2002, which of the following was added as a fundamental duty of every citizen of India? a) A parent or guardian to provide opportunities for education to his child or, as the case may be, ward between the age of six and fourteen years b) To value and preserve the rich heritage of our composite culture c) To promote harmony and the spirit of common brotherhood amongst all people of India transcending religious, linguistic and regional or sectional diversities, to renounce practices derogatory to the dignity of women d) To protect and improve the natural environment including forests, rivers and wild life, and to have compassion for living creatures

Description : In the 86th amendment to the Constitution in 2002, which of the following was added as a fundamental duty of every citizen of India? a) A parent or guardian to provide opportunities for ... the natural environment including forests, rivers and wild life, and to have compassion for living creatures

Last Answer : a) A parent or guardian to provide opportunities for education to his child or, as the case may be, ward between the age of six and fourteen years

Which of the following are the fundamental duties? (a) To respect the National Flag. (b) To protect and improve the natural environment. (c) For a parent to provide opportunities for education to his/her child. (d) To protect monuments and places of national importance. Select the correct answer from the codes given: Codes: (A) (a), (b) and (c) (B) (a), (b) and (d) (C) (a), (c) and (d) (D) (a), (b), (c) and (d)

Description : Which of the following are the fundamental duties? (a) To respect the National Flag. (b) To protect and improve the natural environment. (c) For a parent to provide opportunities for education to his/her child. (d) To protect ... (C) (a), (c) and (d) (D) (a), (b), (c) and (d)

Last Answer : Answer: D

If our physical appearance never changed past a certain age, yet we continued to age normally, how would this visual perception effect the world? or you?

Description : If our physical appearance never changed past a certain age, yet we continued to age normally, how would this visual perception effect the world? or you?

Last Answer : People would be surprised when you dropped dead of old age or behaved in a senile fashion. Besides, with enough plastic surgery your fantasy is real today.

The welders have increased the voltage on the SAW welding set, what would be the effect on the weld appearance? a) No effect b) The weld width would be narrower c) The penetration will be increased d) The weld width would be wider

Description : The welders have increased the voltage on the SAW welding set, what would be the effect on the weld appearance? a) No effect b) The weld width would be narrower c) The penetration will be increased d) The weld width would be wider

Last Answer : d) The weld width would be wider

Clay treatment of petroleum products (A) Decolorizes & stabilises cracked gasoline (B) Desulphurise straight run gasoline & kerosene(C) Adsorb arsenic from feedstock to catalytic reforming(D) All (A), (B) & (C)

Description : Clay treatment of petroleum products (A) Decolorizes & stabilises cracked gasoline (B) Desulphurise straight run gasoline & kerosene (C) Adsorb arsenic from feedstock to catalytic reforming (D) All (A), (B) & (C)

Last Answer : (D) All (A), (B) & (C)

The process of making clay products non-porous and shining is called

Description : The process of making clay products non-porous and shining is called

Last Answer : glazing.

None Corrosive Juice In the stomach Milk Frozen Obstacles ?

Last Answer : Renin Milk Frozen Obstacles Help By 3