Pick up the correct statement from the following: (A) Pointing is measured in sq.m (B) Plastering is measured in sq.m (C) Glazing is measured in sq.m (D) All the above

Pick up the correct statement from the following:
(A) Pointing is measured in sq.m
(B) Plastering is measured in sq.m
(C) Glazing is measured in sq.m
(D) All the above
by

1 Answer

Answer :

(D) All the above
by

Related questions

The item of steel work which is measured in sq.m, is (A) Collapsible gates (B) Rolling shutters (C) Ventilators and glazing (D) All the above

Description : The item of steel work which is measured in sq.m, is (A) Collapsible gates (B) Rolling shutters (C) Ventilators and glazing (D) All the above

Last Answer : (D) All the above

For 12 mm thick cement plastering 1 : 6 on 100 sq.m new brick work, the quantity of cement required, is (A) 0.200 m3 (B) 0.247 m3 (C) 0.274 m3 (D) 0.295 m

Description : For 12 mm thick cement plastering 1 : 6 on 100 sq.m new brick work, the quantity of cement required, is (A) 0.200 m3 (B) 0.247 m3 (C) 0.274 m3 (D) 0.295 m

Last Answer : (C) 0.274 m3

The expected out turn of 12 mm plastering with cement mortar is (A) 2.5 sq m (B) 4.0 sq m (C) 6.0 sq m (D) 8.0 sq m

Description : The expected out turn of 12 mm plastering with cement mortar is (A) 2.5 sq m (B) 4.0 sq m (C) 6.0 sq m (D) 8.0 sq m

Last Answer : (D) 8.0 sq m

Pick up the incorrect statement from the following: (A) Dimensions are measured to the nearest 0.01 m (B) Areas are measured to the nearest 0.01 sq.m (C) Cubic contents are measured to the nearest 0.1 cum (D) Weights are measured to the nearest 0.001 tonnes

Description : Pick up the incorrect statement from the following: (A) Dimensions are measured to the nearest 0.01 m (B) Areas are measured to the nearest 0.01 sq.m (C) Cubic contents are measured to the nearest 0.1 cum (D) Weights are measured to the nearest 0.001 tonnes

Last Answer : (D) Weights are measured to the nearest 0.001 tonnes

Pick up the incorrect statement from the following: (A) No deduction is made for the volume occupied by reinforcement (B) No deduction is made for the openings upto 0.1 sq.m (C) No deduction is made for volumes occupied by pipes, not exceeding 100 sq.cm in crosssection (D) None of these

Description : Pick up the incorrect statement from the following: (A) No deduction is made for the volume occupied by reinforcement (B) No deduction is made for the openings upto 0.1 sq.m (C) No deduction is made for volumes occupied by pipes, not exceeding 100 sq.cm in crosssection (D) None of these

Last Answer : (D) None of these

The item of the brick structure measured in sq.m, is (A) Reinforced brick work (B) Broken glass coping (C) Brick edging (D) Brick work in arches

Description : The item of the brick structure measured in sq.m, is (A) Reinforced brick work (B) Broken glass coping (C) Brick edging (D) Brick work in arches

Last Answer : (B) Broken glass coping

Brick walls are measured in sq. m if the thickness of the wall is (A) 10 cm (B) 15 cm (C) 20 cm (D) None of these

Description : Brick walls are measured in sq. m if the thickness of the wall is (A) 10 cm (B) 15 cm (C) 20 cm (D) None of these

Last Answer : (A) 10 cm

Pick up the incorrect statement from the following: (A) While measuring a distance with a tape of length 100.005 m, the distance to be increasing by 0.005 m for each tape length (B) An increase in temperature causes a tape to increase in length and the measured distance is too large (C) The straight distance between end points of a suspended tape is reduced by an amount called the sag correction (D) A 100 m tape of cross section 10 mm × 0.25 mm stretches about 10 mm under 5 kg pull

Description : Pick up the incorrect statement from the following: (A) While measuring a distance with a tape of length 100.005 m, the distance to be increasing by 0.005 m for each tape length (B) An increase in ... ) A 100 m tape of cross section 10 mm 0.25 mm stretches about 10 mm under 5 kg pull

Last Answer : (B) An increase in temperature causes a tape to increase in length and the measured distance is too large

The brick work is measured in sq metre, in case of (A) Honey comb brick work (B) Brick flat soling (C) Half brick walls or the partition (D) All the above

Description : The brick work is measured in sq metre, in case of (A) Honey comb brick work (B) Brick flat soling (C) Half brick walls or the partition (D) All the above

Last Answer : (D) All the above

Pick up the correct statement from the following: (A) For determination of small colour intensities, tintometer is generally used (B) The odour of water sample is generally measured by a term called odour intensity (C) The colour of water sample may be detected by Nessler tube (D) All the above

Description : Pick up the correct statement from the following: (A) For determination of small colour intensities, tintometer is generally used (B) The odour of water sample is generally measured by a term called odour intensity (C) The colour of water sample may be detected by Nessler tube (D) All the above

Last Answer : (D) All the above

Pick up the correct statement from the following: (A) Frequency is the number of wave crests passing a fixed point in one second (B) Frequency of a wave is measured in Hertz (Hz) (C) Amplitude of a wave is the height of its crust from the mid-point (D) All of these

Description : Pick up the correct statement from the following: (A) Frequency is the number of wave crests passing a fixed point in one second (B) Frequency of a wave is measured in Hertz (Hz) (C) Amplitude of a wave is the height of its crust from the mid-point (D) All of these

Last Answer : Answer: Option D

Pick up the correct statement in case of water supply. (A) Pipes laid in trenches and pipes fixed to walls are measured separately (B) Cutting through walls and floors are included with the item (C) Pipes are classified according to their sizes and quality (D) All the above

Description : Pick up the correct statement in case of water supply. (A) Pipes laid in trenches and pipes fixed to walls are measured separately (B) Cutting through walls and floors are included with the item (C) Pipes are classified according to their sizes and quality (D) All the above

Last Answer : (D) All the above

Pick up the correct statement from the following: (A) All pipes and fittings are classified according to their diameters (B) The diameter of the pipes is the nominal diameter of internal bore (C) All pipes are measured along the centre line of the pipes in metres (D) All the above

Description : Pick up the correct statement from the following: (A) All pipes and fittings are classified according to their diameters (B) The diameter of the pipes is the nominal diameter of internal bore (C) All pipes are measured along the centre line of the pipes in metres (D) All the above

Last Answer : (D) All the above

Pick up the correct statement from the following: (A) The earth work of cutting in trenches or borrow pits in fairly uniform ground is measured with the help of average depths of the dead men (B) The earth work in trenches or borrow pits in irregular ground is measured by taking the difference in levels before and after completion of work (C) The earth work in trenches or borrow pits, where neither a nor b is feasible, are measured from the fillings after deduction of voids (D) All the above

Description : Pick up the correct statement from the following: (A) The earth work of cutting in trenches or borrow pits in fairly uniform ground is measured with the help of average depths of the dead men (B) ... a nor b is feasible, are measured from the fillings after deduction of voids (D) All the above

Last Answer : (D) All the above

Pick up the correct statement from the following: (A) The weight of ingredients of concrete mix, is taken in kilograms (B) Water and aggregates are measured in litres (C) 20 bags of cement make one tonne (D) All the above

Description : Pick up the correct statement from the following: (A) The weight of ingredients of concrete mix, is taken in kilograms (B) Water and aggregates are measured in litres (C) 20 bags of cement make one tonne (D) All the above

Last Answer : Answer: Option D

Which one of the following represents an event? (A) Concrete cured (B) Fixing of door (C) Plastering of walls (D) Selecting sites

Description : Which one of the following represents an event? (A) Concrete cured (B) Fixing of door (C) Plastering of walls (D) Selecting sites

Last Answer : (A) Concrete cured

Glazing is used to make earthenware (A) Hard (B) Soft (C) Porous (D) Impervious

Description : Glazing is used to make earthenware (A) Hard (B) Soft (C) Porous (D) Impervious

Last Answer : Answer: Option D

Glazing of clay products, is done (A) To improve their appearance (B) To protect them from atmospheric effect (C) To protect them from corrosive action (D) All the above

Description : Glazing of clay products, is done (A) To improve their appearance (B) To protect them from atmospheric effect (C) To protect them from corrosive action (D) All the above

Last Answer : Answer: Option D

For sanitary pipes and chemical stonewares, (A) Salt glazing is used (B) Lead glazing is used (C) Opaque glazing is used (D) None of thes

Description : For sanitary pipes and chemical stonewares, (A) Salt glazing is used (B) Lead glazing is used (C) Opaque glazing is used (D) None of these

Last Answer : Answer: Option A

The process of making the back ground rough, before plastering, is (A) Dubbing (B) Hacking (C) Blistering (D) Peeling

Description : The process of making the back ground rough, before plastering, is (A) Dubbing (B) Hacking (C) Blistering (D) Peeling

Last Answer : Answer: Option B

For plastering the exposed brick walls, the cement sand mortar should be (A) 1 : 2 (B) 1 : 3 (C) 1 : 4 (D) 1 : 6

Description : For plastering the exposed brick walls, the cement sand mortar should be (A) 1 : 2 (B) 1 : 3 (C) 1 : 4 (D) 1 : 6

Last Answer : Answer: Option C

The plinth area of a building not includes (A) Area of the walls at the floor level (B) Internal shaft for sanitary installations up to 2 sq m. in area (C) Lift and wall including landing (D) Area of cantilevered porch

Description : The plinth area of a building not includes (A) Area of the walls at the floor level (B) Internal shaft for sanitary installations up to 2 sq m. in area (C) Lift and wall including landing (D) Area of cantilevered porch

Last Answer : (D) Area of cantilevered porch

The output quality of a printer is measured by A) Dot per inch B) Dot per sq. inch C) Dots printed per unit time D) All of above

Description : The output quality of a printer is measured by A) Dot per inch B) Dot per sq. inch C) Dots printed per unit time D) All of above

Last Answer : Answer : B

The output quality of a printer is measured by A) Dot per sq. inch B) Dot per inch C) Dots printed per unit time D) All of the above

Description : The output quality of a printer is measured by A) Dot per sq. inch B) Dot per inch C) Dots printed per unit time D) All of the above

Last Answer : Answer : B

The output quality of a printer is measured bya. Dot per inchb. Dot per sq. inchc. Dots printed per unit timed. All of above

Description : The output quality of a printer is measured by a. Dot per inch b. Dot per sq. inch c. Dots printed per unit time d. All of above

Last Answer : Dot per sq. inch

The output quality of a printer is measured by a. Dot per inch b. Dot per sq. inch c. Dots printed per unit time d. All of above

Description : The output quality of a printer is measured by a. Dot per inch b. Dot per sq. inch c. Dots printed per unit time d. All of above

Last Answer : b. Dot per sq. inch

The output quality of a printer is measured by a. Dot per inch b. Dot per sq. inch c. Dots printed per unit time d. All of above

Description : The output quality of a printer is measured by a. Dot per inch b. Dot per sq. inch c. Dots printed per unit time d. All of above

Last Answer : b. Dot per sq. inch

A steel rod of sectional area 250 sq. mm connects two parallel walls 5 m apart. The nuts at the ends were tightened when the rod was heated to 100°C. If steel = 0.000012/C°, Esteel = 0.2 MN/mm2 , the tensile force developed at a temperature of 50°C, is (A) 80 N/mm2 (B) 100 N/mm2 (C) 120 N/mm2 (D) 150 N/mm2 Answer: Option

Description : A steel rod of sectional area 250 sq. mm connects two parallel walls 5 m apart. The nuts at the  ends were tightened when the rod was heated to 100°C. If steel = 0.000012/C°, Esteel = 0.2  MN/mm2 , the ... N/mm2 (B) 100 N/mm2 (C) 120 N/mm2 (D) 150 N/mm2 Answer: Option 

Last Answer : (C) 120 N/mm

Area of steel required per metre width of pavement for a length of 20 m for design wheel load 6300 kg and permissible stress in steel 1400 kg/cm2 , is (A) 70 kg/sq cm (B) 80 kg/sq cm (C) 90 kg/sq cm (D) 100 kg/sq cm

Description : Area of steel required per metre width of pavement for a length of 20 m for design wheel load 6300 kg and permissible stress in steel 1400 kg/cm2 , is (A) 70 kg/sq cm (B) 80 kg/sq cm (C) 90 kg/sq cm (D) 100 kg/sq cm

Last Answer : Answer: Option C

For 100 sq. m cement concrete (1 : 2: 4) 4 cm thick floor, the quantity of cement required, is (A) 0.90 m3 (B) 0.94 m3 (C) 0.98 m3 (D) 1.00 m3

Description : For 100 sq. m cement concrete (1 : 2: 4) 4 cm thick floor, the quantity of cement required, is (A) 0.90 m3 (B) 0.94 m3 (C) 0.98 m3 (D) 1.00 m3

Last Answer : (B) 0.94 m3

The excavation exceeding 1.5 m in width and 10 sq.m in plan area with a depth not exceeding 30 cm, is termed as (A) Excavation (B) Surface dressing (C) Cutting (D) Surface excavation

Description : The excavation exceeding 1.5 m in width and 10 sq.m in plan area with a depth not exceeding 30 cm, is termed as (A) Excavation (B) Surface dressing (C) Cutting (D) Surface excavation

Last Answer : (D) Surface excavation

If the effective plan area of a warehouse is 54 sq. m, and maximum height of piles permitted is 270 cm, the number of cement bags to be stored, is (A) 2000 bags (B) 2200 bags (C) 2400 bags (D) 2700 bags

Description : If the effective plan area of a warehouse is 54 sq. m, and maximum height of piles permitted is 270 cm, the number of cement bags to be stored, is (A) 2000 bags (B) 2200 bags (C) 2400 bags (D) 2700 bags

Last Answer : Answer: Option D

Tilt of the staff in stadia tacheometry increases the intercept if it is (A) Away from the telescope pointing down hill (B) Towards the telescope pointing up-hill (C) Away from the telescope pointing up-hill (D) None of these

Description : Tilt of the staff in stadia tacheometry increases the intercept if it is (A) Away from the telescope pointing down hill (B) Towards the telescope pointing up-hill (C) Away from the telescope pointing up-hill (D) None of these

Last Answer : (C) Away from the telescope pointing up-hill

Pick up the correct statement from the following: (A) Detention period for plain sedimentation tanks ranges between 4 to 8 hours (B) Detention period for sedimentation tanks, using coagulants usually ranges between 2 to 4 hours(C) The horizontally flow velocity in sedimentation tanks, is generally limited to 0.3 m/minute (D) All the above

Description : Pick up the correct statement from the following:  (A) Detention period for plain sedimentation tanks ranges between 4 to 8 hours  (B) Detention period for sedimentation tanks, using coagulants usually ... in sedimentation tanks, is generally limited to 0.3 m/minute  (D) All the above

Last Answer : (D) All the above

Pick up the correct statement from the following: (A) Hoop strain of the walls of a cylinder due to liquid is (pd/2tE) (1 - 1/2m) (B) Longitudinal strain in the walls of a cylinder due to liquid is (pd/2tE) (1/2 - 1/m) (C) Volumetric change in the cylinder due to liquid is (pd/2tE) (5/2 - 2/m) (D) All the above

Description : Pick up the correct statement from the following:  (A) Hoop strain of the walls of a cylinder due to liquid is (pd/2tE) (1 - 1/2m)  (B) Longitudinal strain in the walls of a cylinder due to liquid is ... change in the cylinder due to liquid is (pd/2tE) (5/2 - 2/m)  (D) All the above 

Last Answer : (D) All the above 

Pick up the correct statement from the following: (A) For a uniformly distributed load, the shear force varies linearly (B) For a uniformly distributed load, B.M. curve is a parabola (C) For a load varying linearly, the shear force curve is a parabola (D) All the above

Description : Pick up the correct statement from the following:  (A) For a uniformly distributed load, the shear force varies linearly  (B) For a uniformly distributed load, B.M. curve is a parabola  (C) For a load varying linearly, the shear force curve is a parabola  (D) All the above 

Last Answer : (D) All the above 

Pick up the correct statement from the following: (A) Mcg = M M 2 + r2 ) where letters carry their usual meanings (B) Tcp = m 2 + T2 )where letters carry their usual meanings (C) The torque which when acting alone would produce maximum shear stress equal to the maximum shear stress caused by the combined bending and torsion, is called equivalent torque (D) All the above

Description : Pick up the correct statement from the following:  (A) Mcg = M M 2  + r2 ) where letters carry their usual meanings  (B) Tcp = m 2  + T2 )where ... maximum shear stress caused by the combined bending and torsion, is called equivalent  torque  (D) All the above 

Last Answer : (D) All the above 

Pick up the correct statement from the following: (A) When water table is above the base of a footing, the dry weight m should be used for soil below water table (B) When water table is located somewhat below the base of a footing, the elastic wedge is partly of moist soil and partly of submerged soil, and a suitable reduction factor is used (C) When water table is just at the base of the footing, no reduction factor is used (D) None of these

Description : Pick up the correct statement from the following: (A) When water table is above the base of a footing, the dry weight m should be used for soil below water table (B) When water table is located ... water table is just at the base of the footing, no reduction factor is used (D) None of these

Last Answer : (B) When water table is located somewhat below the base of a footing, the elastic wedge is partly of moist soil and partly of submerged soil, and a suitable reduction factor is used

Pick up the correct statement from the following: (A) O.M.C. refers to the moisture corresponding to the maximum point on the moisture content dry density curve (B) The line which shows moisture content dry density relation for soil containing a constant percentage of air voids, is known as air void line (C) The free fall of hammer for compaction is 30.5 cm (D) All the above

Description : Pick up the correct statement from the following: (A) O.M.C. refers to the moisture corresponding to the maximum point on the moisture content dry density curve (B) The line which shows moisture content dry ... void line (C) The free fall of hammer for compaction is 30.5 cm (D) All the above

Last Answer : (D) All the above

Pick up the correct statement from the following: (A) Detailed survey is carried out for a strip of land about 30 m at sharp curves (B) Levels are taken along the trace cut at an interval of 20 m (C) Contour interval is generally adopted at 2 metres vertical interval (D) All the above

Description : Pick up the correct statement from the following: (A) Detailed survey is carried out for a strip of land about 30 m at sharp curves (B) Levels are taken along the trace cut at an interval of 20 m (C) Contour interval is generally adopted at 2 metres vertical interval (D) All the above

Last Answer : Answer: Option D

Pick up the correct statement from the following: (A) Safety fences are provided on either side of a roadway if embankments are in excess of 6 metres (B) Safety fences are provided on outside of the curves of radii less than 750 m if the embankments are between 3 metres and 6 metres (C) Guard stones are provided at 2.5 metres intervals if embankments are between 1.6 metres to 3 metres (D) All the above

Description : Pick up the correct statement from the following: (A) Safety fences are provided on either side of a roadway if embankments are in excess of 6 metres (B) Safety fences are provided on outside of the ... 2.5 metres intervals if embankments are between 1.6 metres to 3 metres (D) All the above

Last Answer : Answer: Option D

Pick up the correct statement from the following: (A) The height of head light above road surface, is taken as 0.75 m (B) The beam of head light is up to one degree upwards from the grade of road (C) While designing the valley curve, the height of the object is assumed nil (D) All the above

Description : Pick up the correct statement from the following: (A) The height of head light above road surface, is taken as 0.75 m (B) The beam of head light is up to one degree upwards from the grade of road (C) While designing the valley curve, the height of the object is assumed nil (D) All the above

Last Answer : Answer: Option D

Pick up the correct statement from the following: (A) Minimum desirable width of medians on rural highways is 5 metres (B) Minimum width of medians should be 3 metres (C) On long bridges and viaducts, the width of medians should be 1.5 m (D) All the above

Description : Pick up the correct statement from the following: (A) Minimum desirable width of medians on rural highways is 5 metres (B) Minimum width of medians should be 3 metres (C) On long bridges and viaducts, the width of medians should be 1.5 m (D) All the above

Last Answer : Answer: Option D

Referring of given figure, pick up the correct statement from the following: (A) The total length of centre line of four walls is 20 m (B) Length of long wall out-to-out is 6.80 m (C) Length of short walls in-to-in is 3.20 m (D) All the above

Description : Referring of given figure, pick up the correct statement from the following: (A) The total length of centre line of four walls is 20 m (B) Length of long wall out-to-out is 6.80 m (C) Length of short walls in-to-in is 3.20 m (D) All the above

Last Answer : (D) All the above

Assertion Net torque in the current carrying loop placed in a uniform magnetic field (pointing inwards) is zero. Reasonl Magnetic moment (M) is inward

Description : Assertion Net torque in the current carrying loop placed in a uniform magnetic field (pointing inwards) is zero. Reasonl Magnetic moment (M) is inward

Last Answer : Assertion Net torque in the current carrying loop placed in a uniform magnetic field (pointing inwards) ... . Reasonl Magnetic moment (M) is inwards.

How many coats of glazing can be put on a bisque fired vessel?

Description : How many coats of glazing can be put on a bisque fired vessel?

Last Answer : answer:It depends on the formulation of the glaze and the thickness of the coats. If it's a glaze with a high alumina content that stays put, then you should be fine; a runnier glaze will run even ... too thick, you can always wash it off the bisque, let the bisque dry completely, and start over.

The inner diameter of a circular well is 3.5m. It is 10m deep. Find (i) its inner curved surface area, (ii) the cost of plastering this curved surface at the rate of Rs. 40 per m2. -Maths 9th

Description : The inner diameter of a circular well is 3.5m. It is 10m deep. Find (i) its inner curved surface area, (ii) the cost of plastering this curved surface at the rate of Rs. 40 per m2. -Maths 9th

Last Answer : Inner radius of circular well, r = 3.5/2m = 1.75m Depth of circular well, say h = 10m (i) Inner curved surface area = 2πrh = (2 (22/7 ) 1.75 10) = 110 Therefore, the inner curved surface ... area = Rs (110 40) = Rs.4400 Therefore, the cost of plastering the curved surface of the well is Rs. 4400.

Why is glazing used to make ceramic materials ?

Description : Why is glazing used to make ceramic materials ?

Last Answer : A mixture of ceramic materials is molded into a specific molding of the crossing and after drying in hot air, it is burned and turned into perforated burnt ceramic material or biscuits. In this ... . into a thin glass material. Glazing closes the pores on the surface of the material biscuits.

What is a glazing spline and channel?

Description : What is a glazing spline and channel?

Last Answer : Glazing spine and channel make it easy to choose the correct vinyl need for the application. DKHardware have lots of options for the glazing spine at reasonable cost with multiple options.