Description : Cast iron is used for (A) Structural works in beams (B) Small sized water pipes (C) Columns and struts (D) None to these
Last Answer : Answer: Option C
Description : Mild steel is used for (A) Structural works in beams, joints and girders (B) Small sized water pipes (C) Columns and struts (D) None of these
Last Answer : Answer: Option A
Description : Pick up the correct statement from the following: (A) Copper pipes are highly resistant to acidic and alkaline water (B) Wrought iron pipes are lighter than cast iron pipes (C) Wrought iron pipes corrode quickly and are less durable (D) All the above
Last Answer : (D) All the above
Description : Pick up the correct statement from the following: (A) The structural member subjected to compression and whose dimensions are small as compared to its length, is called a stmt (B) The ... in lateral direction of a long column, is generally known as buckling (D) All the above
Description : A grillage foundation (A) Is provided for heavily loaded isolated columns (B) Is treated as spread foundation (C) Consists of two sets of perpendicularly placed steel beams (D) All the above
Last Answer : Answer: Option D
Description : A flat slab is supported (A) On beams (B) On columns (C) On beams and columns (D) On columns monolithically built with slab
Description : For the construction of R.C.C. slabs, columns, beams, walls, etc. the grade of concrete mix used, is (A) 1 : 3 : 6 (B) 1 : 1½ : 3 (C) 1 : 2 : 4 (D) 1 : 1 : 2
Last Answer : (C) 1 : 2 : 4
Description : Pick up the correct statement from the following: (A) Construction joints in columns are provided a few cm below the junction of beam (B) Construction joints in columns are provided at the bottom ... (C) Construction joints in beams and slabs are provided within middle third (D) All the above
Description : Pick up the correct statement from the following: (A) The roof slabs of multi-storeyed buildings are constructed monolithically to carry the various floor loads (B) The beams of multi-storeyed ... slab is spanned across the secondary beams provided between the main beams (D) All of these
Description : In a group housing project, it is proposed to use pre-fabricated RCC beams and columns. The most useful construction equipment is (a) Derrick Crane (b) Chute (c) Weigh Batcher (d) Transit Mixer
Last Answer : (a) Derrick Crane
Description : A reinforcing slab, build monolithically with the supporting columns and is reinforced in two or more directions, without any provision of beams is called a (a) Two way slab (b) Flat slab (c) Continus slab (d) Cireulashion
Last Answer : (b) Flat slab
Description : The ratio of the thickness of web to that of flange of steel rolled structural beams and channels is (A) Less than 1 (B) Equal to 1 (C) Greater than 1 (D) Less than 1 in beams but greater than 1 in channels
Description : For walls, columns and vertical faces of all structural members, the form work is generally removed after (A) 24 to 48 hours (B) 3 days (C) 7 days (D) 14 days
Description : Grillage foundation (A) Is used to transfer heavy structural loads from steel columns to a soil having low bearing capacity (B) Is light and economical (C) Does not require deep cutting as the required base area with required pressure intensity is obtained at a shallow depth (D) All the above
Description : What are the beams and columns of a wall called ?
Last Answer : The beams of the walls are horizontal and the columns are vertical.
Description : Structural sections such as rails, angles, I-beams are made by 1. Hot rolling 2. Hot drawing 3. Hot piercing 4. Hot extrusion
Last Answer : Structural sections such as rails, angles, I-beams are made by Hot rolling
Description : Struts are load carrying members of a frame structure which are subjected to (A) Axial tension loads (B) Axial compressive loads (C) Torsional loads (D) Transverse loads
Last Answer : (B) Axial compressive loads
Description : The members which support covering material of a sloping roof, are (A) Rafters (B) Purlins (C) Battens (D) Struts
Description : Forge pig may be converted to wrought iron by (A) Rolling (B) Pudding (C) Shingling (D) Refining
Last Answer : Answer: Option B
Description : A ferrous metal is (A) Cast iron (B) Wrought iron (C) Steel (D) All the above
Description : Wrought iron is manufactured from pig iron by (A) Refining (B) Pudding (C) Shingling (D) All the above
Description : Bessemer process is used for the manufacture of (A) Pig iron (B) Cast iron (C) Wrought iron D) Steel
Description : Depending on the chemical composition and mechanical properties, iron may be classified as (A) Cast iron (B) Wrought iron (C) Steel (D) All the above
Description : Wrought iron contains carbon about (A) 1.5% to 5.5% (B) 0.5% to 1.75% (C) 0.1% to 0.25% (D) None to these
Description : The process of manufacturing steel by heating short lengths of wrought iron bars mixed with charcoal in fire clay crucibles and collecting the molten iron into moulds, is known as (A) Cementation process (B) Crucible process (C) Bessemer process (D) Open hearth process
Description : The variety of pig iron used for manufacture of wrought iron, is (A) Bessemer pig (B) Grey or foundry pig (C) White forge pig (D) Mottled pig
Description : Wrought iron contains carbon upto (A) 0.25 % (B) 1.0 % (C) 1.5 % (D) 2 %
Description : The steel used in R.C.C. work is (A) Stainless steel (B) Mild steel (C) High carbon steel (D) Wrought iron
Description : Pick up the correct statement from the following: (A) Blisters in the finished wrought iron, are caused due to the reaction between oxide of iron and carbon (B) The edges of a finished wrought iron ... shortage (C) Pig iron (charcoal) is manufactured from magnetic ore (Fe3O4) (D) All the above
Description : Which of the following is the purest form of iron? (A) Cast iron (B) Wrought iron (C) Mild steel (D) High carbon steel
Description : Cast iron pipes (A) Are widely used in city water supplies (B) Resist corrosion satisfactorily (C) May last for 100 years (D) All the above
Description : The cast iron pipes for water supply system are used for (A) Durability (B) Strength (C) Easy connection (D) All the above
Description : The type of pipe commonly used in water supply distribution schemes, is (A) R.C.C. pipes (B) Hume pipes (C) Cast iron pipes (D) G.I. pipes
Last Answer : (C) Cast iron pipes
Description : Pick up the wrong nominal internal diameter of cast iron (spun) pipes in mm from the following: (A) 300 (B) 400 (C) 550 (D) 650
Last Answer : (C) 550
Description : Cast iron pipes are generally preferred to, because (A) Of moderate cost (B) Of ease to join (C) Of longer life (D) All the above
Description : Service connections to consumers houses, are generally provided with (A) Copper pipes (B) Hume pipes (C) Galvanised iron pipes (D) P.V.C. pipe
Last Answer : (C) Galvanised iron pipes
Description : The type of joint generally used in cast iron pipes, is (A) Socket and spigot joint (B) Flanged joint (C) Dresser coupling joint (D) All the above
Description : For a city developed haphazardly, the layout of distribution pipes preferred to, is (A) Ring system (B) Radial system (C) Grid iron system (D) Dead end system
Last Answer : (D) Dead end system
Description : The maximum pressure to which cast iron pipes may be subjected to, is (A) 3 kg/cm2 (B) 5 kg/cm2 (C) 7 kg/cm2 (D) 10 kg/cm
Last Answer : (C) 7 kg/cm
Description : In a well planned city, the layout of distribution pipes generally adopted, is (A) Grid-iron system (B) Interlaced system (C) Reticulation system (D) All the above
Description : The joint used for joining the plain ends of cast iron pipes, is (A) Flanged joint (B) Socket and spigot joint (C) Dresser coupling joint (D) Flexible joint
Last Answer : (C) Dresser coupling joint
Description : Manholes are less common in (A) Cast iron pipes (B) Steel pipes (C) Hume steel pipes (D) R.C.C. pipes
Last Answer : (A) Cast iron pipes
Description : TIES : STRUTS : a.purlins : piers b.angle : tee c.rolle support : hinge d.compression : tension e.107 dynes
Last Answer : d. compression : tension
Description : He's a boastful, puffed-up fellow, wearing spurs; eyes gleaming yellow. As he proudly struts about, he's in charge, there is no doubt.What is he? -Riddles
Last Answer : He is a Rooster.
Description : instructions remove/install rear struts
Last Answer : Need Answer
Description : How can yoy change Mcpherson struts, would I need a spring compressor?
Last Answer : You will need a spring compressor for any strut installation job.
Description : Shocks and Struts Replacement?
Last Answer : form_title=Shocks and Struts Replacement form_header=Getting your shocks and struts replaced will restore vehicle handling and control while greatly improving ride comfort. What is the year, make and model of your ... on your car?=_ When was the last time your shocks and struts were replaced?=_
Description : How do you replace the rear struts on a kia spectra?
Last Answer : With tools.
Description : A hand pump is usually fitted: a. For ground servicing purposes b. Lowering the landing gear in an emergency c. Pressurising the oleo struts in the air d. Retracting the gear after take-off
Last Answer : a. For ground servicing purposes