What are the beams and columns of a wall called ?

What are the beams and columns of a wall called ?
by

1 Answer

Answer :

The beams of the walls are horizontal and the columns are vertical.
by

Related questions

A reinforcing slab, build monolithically with the supporting columns and is reinforced in two or more directions, without any provision of beams is called a (a) Two way slab (b) Flat slab (c) Continus slab (d) Cireulashion

Description : A reinforcing slab, build monolithically with the supporting columns and is reinforced in two or more directions, without any provision of beams is called a (a) Two way slab (b) Flat slab (c) Continus slab (d) Cireulashion

Last Answer : (b) Flat slab

A grillage foundation (A) Is provided for heavily loaded isolated columns (B) Is treated as spread foundation (C) Consists of two sets of perpendicularly placed steel beams (D) All the above

Description : A grillage foundation (A) Is provided for heavily loaded isolated columns (B) Is treated as spread foundation (C) Consists of two sets of perpendicularly placed steel beams (D) All the above

Last Answer : Answer: Option D

A flat slab is supported (A) On beams (B) On columns (C) On beams and columns (D) On columns monolithically built with slab

Description : A flat slab is supported (A) On beams (B) On columns (C) On beams and columns (D) On columns monolithically built with slab

Last Answer : Answer: Option D

For the construction of R.C.C. slabs, columns, beams, walls, etc. the grade of concrete mix used, is (A) 1 : 3 : 6 (B) 1 : 1½ : 3 (C) 1 : 2 : 4 (D) 1 : 1 : 2

Description : For the construction of R.C.C. slabs, columns, beams, walls, etc. the grade of concrete mix used, is (A) 1 : 3 : 6 (B) 1 : 1½ : 3 (C) 1 : 2 : 4 (D) 1 : 1 : 2

Last Answer : (C) 1 : 2 : 4

Pick up the correct statement from the following: (A) Construction joints in columns are provided a few cm below the junction of beam (B) Construction joints in columns are provided at the bottom hunching (C) Construction joints in beams and slabs are provided within middle third (D) All the above

Description : Pick up the correct statement from the following: (A) Construction joints in columns are provided a few cm below the junction of beam (B) Construction joints in columns are provided at the bottom ... (C) Construction joints in beams and slabs are provided within middle third (D) All the above

Last Answer : Answer: Option D

Mild steel is used for (A) Structural works in beams, joints and girders (B) Small sized water pipes (C) Columns and struts (D) None of these

Description : Mild steel is used for (A) Structural works in beams, joints and girders (B) Small sized water pipes (C) Columns and struts (D) None of these

Last Answer : Answer: Option A

Cast iron is used for (A) Structural works in beams (B) Small sized water pipes (C) Columns and struts (D) None to these

Description : Cast iron is used for (A) Structural works in beams (B) Small sized water pipes (C) Columns and struts (D) None to these

Last Answer : Answer: Option C

Wrought iron is used for (A) Structural works in beams (B) Small sized water pipes (C) Columns and struts (D) None to these

Description : Wrought iron is used for (A) Structural works in beams (B) Small sized water pipes (C) Columns and struts (D) None to these

Last Answer : Answer: Option B

Pick up the correct statement from the following: (A) The roof slabs of multi-storeyed buildings are constructed monolithically to carry the various floor loads (B) The beams of multi-storeyed buildings rest on girders and are the main load transferring members to the columns (C) The slab is spanned across the secondary beams provided between the main beams (D) All of these

Description : Pick up the correct statement from the following: (A) The roof slabs of multi-storeyed buildings are constructed monolithically to carry the various floor loads (B) The beams of multi-storeyed ... slab is spanned across the secondary beams provided between the main beams (D) All of these

Last Answer : Answer: Option D

In a group housing project, it is proposed to use pre-fabricated RCC beams and columns. The most useful construction equipment is (a) Derrick Crane (b) Chute (c) Weigh Batcher (d) Transit Mixer

Description : In a group housing project, it is proposed to use pre-fabricated RCC beams and columns. The most useful construction equipment is (a) Derrick Crane (b) Chute (c) Weigh Batcher (d) Transit Mixer

Last Answer : (a) Derrick Crane

Can you replace a support wall in a house with columns and remove the wall?

Description : Can you replace a support wall in a house with columns and remove the wall?

Last Answer : It takes a lot of structural engineering to remove a load-bearing wall, but it can be done. Usually, there will need to be a beam installed overhead to take the load, and possibly columns to support the ... t a load-bearing wall underneath it) would be less of a problem, but I'm not entirely sure.

Which one of the following devices is not used for both the absorption as well as the liquid-liquid extraction processes? (A) Packed towers(B) Plate towers(C) Spray towers(D) Wetted wall columns

Description : Which one of the following devices is not used for both the absorption as well as the liquid-liquid extraction processes? (A) Packed towers (B) Plate towers (C) Spray towers (D) Wetted wall columns

Last Answer : (D) Wetted wall columns

The measurement is made for stone work in square metre in case of (A) Wall facing (B) Columns, lintels, copings (C) Building work (D) (a) and (d) of the above

Description : The measurement is made for stone work in square metre in case of (A) Wall facing (B) Columns, lintels, copings (C) Building work (D) (a) and (d) of the above

Last Answer : (D) (a) and (d) of the above

Laser beams can generate three dimensional images of objects in a process called a) polygraphy b) telegraphy c) holography d) autography

Description : Laser beams can generate three dimensional images of objects in a process called a) polygraphy b) telegraphy c) holography d) autography

Last Answer : c) holography

Fixed beam is also called as a. Propped beams b. Pulled-up beam c.Encaster beam d. Stacked beams

Description : Fixed beam is also called as a. Propped beams b. Pulled-up beam c.Encaster beam d. Stacked beams

Last Answer : c.Encaster beam

What is a good summary of the play "The Beams Are Creaking"?

Description : What is a good summary of the play "The Beams Are Creaking"?

Last Answer : We don’t do homework for people but I suspect if you Google the title, you will find some good sites with summaries. I also suspect the teacher would like you to use your own words and will know if you plagiarize.

Feng Shui Question: How can you "cure" a problem with traditional houses with exposed beams in the ceiling?

Description : Feng Shui Question: How can you "cure" a problem with traditional houses with exposed beams in the ceiling?

Last Answer : If you don’t want a house with beams, don’t look at houses with beams. Don’t try to alter the original architechtural design. It will be tacky.

Williot-Mohr diagram is used to determine a.slope of beams b.107 dynes c.deflection in beams d.deflection in trusses e.slope of trusses

Description : Williot-Mohr diagram is used to determine a.slope of beams b.107 dynes c.deflection in beams d.deflection in trusses e.slope of trusses

Last Answer : d. deflection in trusses

Which magnet is used in a crane to move heavy iron beams ?

Description : Which magnet is used in a crane to move heavy iron beams ?

Last Answer : : Strong electromagnets are used in cranes to move heavy iron beams.

Wormwood in the beams

Description : Is it possible to get rid of worms forever or is it better to ensure the replacement of damaged beams in the cottage?

Last Answer : Replace the beams and treat the entire building with a product against these pests

Two parallel beams of positrons moving in the same direction will

Description : Two parallel beams of positrons moving in the same direction will

Last Answer : Two parallel beams of positrons moving in the same direction will A. not interact with each ... bedeflected normal to the plane containing two beams

Two parallel wires carrying current in the same direction attract each other while two beams of electrons travelling in the same direction repel each

Description : Two parallel wires carrying current in the same direction attract each other while two beams of electrons travelling in the same direction repel each

Last Answer : Two parallel wires carrying current in the same direction attract each other while two beams of ... force between them D. magnetic force between them

What's the difference in the Flashlight beams in ADP and ATP?

Description : What's the difference in the Flashlight beams in ADP and ATP?

Last Answer : ADP is like a partially charged battery that will produce a dim light & ATP is like a fully charged battery that produces a bright light

What's the difference in the Flashlight beams in ADP and ATP?

Description : What's the difference in the Flashlight beams in ADP and ATP?

Last Answer : ADP is like a partially charged battery that will produce a dim light & ATP is like a fully charged battery that produces a bright light

We receive sunlight on earth surface. What type of light beams are these?

Description : We receive sunlight on earth surface. What type of light beams are these?

Last Answer : Diverging

An optically plane surface reflects a beam of light – (1) as a parallel beam in one direction (2) as diffused beams in all d rections (3) as parallel beams in all direactions (4) as a diffused beam in one direction

Description : An optically plane surface reflects a beam of light – (1) as a parallel beam in one direction (2) as diffused beams in all d rections (3) as parallel beams in all direactions (4) as a diffused beam in one direction

Last Answer : (1) as a parallel beam in one direction Explanation: An optically plane surface reflects a beam of light as a parallel beam in one direction. The set of incident rays are reflected as a set ... its reflecting surface is smooth. This type of reflection of a set of rays is called Specular Reflection.

A nuclear reactor can't be used for (A) The production of radioisotopes (B) Supplying intense fields or beams of neutron for scientific experiments (C) Marine ship propulsion (D) None of these

Description : A nuclear reactor can't be used for (A) The production of radioisotopes (B) Supplying intense fields or beams of neutron for scientific experiments (C) Marine ship propulsion (D) None of these

Last Answer : (D) None of these

Which multiplexing technique involves signals composed of light beams? A) FDM B) TDM C) WDM D) none of the above

Description : Which multiplexing technique involves signals composed of light beams? A) FDM B) TDM C) WDM D) none of the above

Last Answer : WDM

For beams of uniform strength, if depth is constant, (A) Width b M (B) Width b M (C) Width b 3 M (D) Width b 1/M

Description : For beams of uniform strength, if depth is constant,  (A) Width b M (B) Width b M (C) Width b 3 M (D) Width b 1/M

Last Answer : (A) Width b M

Beams composed of more than one material, rigidly connected together so as to behave as one piece, are known as (A) Compound beams (B) Indeterminate beams (C) Determinate beams (D) Composite beams

Description : Beams composed of more than one material, rigidly connected together so as to behave as one  piece, are known as  (A) Compound beams  (B) Indeterminate beams  (C) Determinate beams  (D) Composite beams

Last Answer : (D) Composite beams

The assumption in the theory of bending of beams is: (A) Material is homogeneous (B) Material is isotropic (C) Young's modulus is same in tension as well as in compression (D) All the above

Description : The assumption in the theory of bending of beams is:  (A) Material is homogeneous  (B) Material is isotropic  (C) Young's modulus is same in tension as well as in compression  (D) All the above 

Last Answer : (D) All the above 

A simply supported beam A carries a point load at its mid span. Another identical beam B carries the same load but uniformly distributed over the entire span. The ratio of the maximum deflections of the beams A and B, will be (A) 2/3 (B) 3/2 (C) 5/8 (D) 8/5

Description : A simply supported beam A carries a point load at its mid span. Another identical beam B carries  the same load but uniformly distributed over the entire span. The ratio of the maximum  deflections of the beams A and B, will be  (A) 2/3  (B) 3/2  (C) 5/8  (D) 8/5 

Last Answer : (D) 8/5 

Muller Breslau's principle for obtaining influence lines is applicable to (i) Trusses (ii) Statically determinate beams and frames (iii) Statically indeterminate structures, the material of which is elastic and follows Hooke's law (iv) Any statically indeterminate structure The correct answer is (A) (i), (ii) and (iii) (B) (i), (ii) and (iv) (C) (i) and (ii) (D) Only (i)

Description : Muller Breslau's principle for obtaining influence lines is applicable to (i) Trusses (ii) Statically determinate beams and frames (iii) Statically indeterminate structures, the material of which is elastic and follows Hooke's law (iv ... B) (i), (ii) and (iv) (C) (i) and (ii) (D) Only (i)

Last Answer : (A) (i), (ii) and (iii)

The Castigliano's second theorem can be used to compute deflections (A) In statically determinate structures only (B) For any type of structure (C) At the point under the load only (D) For beams and frames only

Description : The Castigliano's second theorem can be used to compute deflections (A) In statically determinate structures only (B) For any type of structure (C) At the point under the load only (D) For beams and frames only

Last Answer : (B) For any type of structure

The point of contraflexure occurs in (A) Cantilever beams only (B) Continuous beams only (C) Over hanging beams only (D) All types of beams

Description : The point of contraflexure occurs in (A) Cantilever beams only (B) Continuous beams only (C) Over hanging beams only (D) All types of beams

Last Answer : (C) Over hanging beams only

The cross sections of the beams of equal length are a circle and a square whose permissible bending stress is same under same maximum bending. The ratio of their flexural weights is, (A) 1.118 (B) 1.338 (C) 1.228 (D) 1.108

Description : The cross sections of the beams of equal length are a circle and a square whose permissible bending stress is same under same maximum bending. The ratio of their flexural weights is, (A) 1.118 (B) 1.338 (C) 1.228 (D) 1.108

Last Answer : (A) 1.118

The areas of cross-section of a square beam and a circular beam subjected to equal bending moments, are same. (A) Circular beam is more economical (B) Square beam is more economical (C) Both the beams are equally strong (D) Both the beams are equally economical

Description : The areas of cross-section of a square beam and a circular beam subjected to equal bending  moments, are same.  (A) Circular beam is more economical  (B) Square beam is more economical  (C) Both the beams are equally strong  (D) Both the beams are equally economical 

Last Answer : (B) Square beam is more economical 

Beams of uniform strength are preferred to those of uniform section because these are economical for (A) Large spans (B) Heavy weights (C) Light weights (D) Short spans

Description : Beams of uniform strength are preferred to those of uniform section because these are economical for (A) Large spans (B) Heavy weights (C) Light weights (D) Short spans

Last Answer : (A) Large spans

Steel beam theory is used for (A) Design of simple steel beams (B) Steel beams encased in concrete (C) Doubly reinforced beams ignoring compressive stress in concrete (D) Beams if shear exceeds 4 times allowable shear stress

Description : Steel beam theory is used for (A) Design of simple steel beams (B) Steel beams encased in concrete (C) Doubly reinforced beams ignoring compressive stress in concrete (D) Beams if shear exceeds 4 times allowable shear stress

Last Answer : Answer: Option C

Design of R.C.C. simply supported beams carrying U.D.L. is based on the resultant B.M. at (A) Supports (B) Mid span (C) Every section (D) Quarter span

Description : Design of R.C.C. simply supported beams carrying U.D.L. is based on the resultant B.M. at (A) Supports (B) Mid span (C) Every section (D) Quarter span

Last Answer : Answer: Option B

Design of R.C.C. cantilever beams, is based on the resultant force at (A) Fixed end (B) Free end (C) Mid span (D) Mid span and fixed support

Description : Design of R.C.C. cantilever beams, is based on the resultant force at (A) Fixed end (B) Free end (C) Mid span (D) Mid span and fixed support

Last Answer : Answer: Option A

The width of the flange of a T-beam, which may be considered to act effectively with the rib depends upon (A) Breadth of the rib (B) Overall thickness of the rib (C) Centre to centre distance between T-beams (D) All the above

Description : The width of the flange of a T-beam, which may be considered to act effectively with the rib depends upon (A) Breadth of the rib (B) Overall thickness of the rib (C) Centre to centre distance between T-beams (D) All the above

Last Answer : Answer: Option D

The maximum area of tension reinforcement in beams shall not exceed (A) 0.15 % (B) 1.5 % (C) 4 % (D) 1 %

Description : The maximum area of tension reinforcement in beams shall not exceed (A) 0.15 % (B) 1.5 % (C) 4 % (D) 1 %

Last Answer : Answer: Option C

Pick up the true statement from the following: (A) Plain ceiling provides the best property diffusing light (B) In the absence of beams, it is easier to install piping (C) In the absence of beams, it is easier to paint (D) All the above

Description : Pick up the true statement from the following: (A) Plain ceiling provides the best property diffusing light (B) In the absence of beams, it is easier to install piping (C) In the absence of beams, it is easier to paint (D) All the above

Last Answer : Answer: Option D

An intermediate T-beam reinforced with two layers of tensile steel with clear cover 13 cm encasted with the floor of a hall 12 metres by 7 metres, is spaced at 3 metres from adjoining beams and if the width of the beam is 20 cm, the breadth of the flange is (A) 300 cm (B) 233 cm (C) 176 cm (D) 236 cm

Description : An intermediate T-beam reinforced with two layers of tensile steel with clear cover 13 cm encasted with the floor of a hall 12 metres by 7 metres, is spaced at 3 metres from adjoining beams and if the width of the beam is ... breadth of the flange is (A) 300 cm (B) 233 cm (C) 176 cm (D) 236 cm

Last Answer : Answer: Option C

According to the steel beam theory of doubly reinforced beams (A) Tension is resisted by tension steel (B) Compression is resisted by compression steel (C) Stress in tension steel equals the stress in compression steel (D) All the above

Description : According to the steel beam theory of doubly reinforced beams (A) Tension is resisted by tension steel (B) Compression is resisted by compression steel (C) Stress in tension steel equals the stress in compression steel (D) All the above

Last Answer : Answer: Option D

For a continuous floor slab supported on beams, the ratio of end span length and intermediate span length, is (A) 0.6 (B) 0.7 (C) 0.8 (D) 0.9

Description : For a continuous floor slab supported on beams, the ratio of end span length and intermediate span length, is (A) 0.6 (B) 0.7 (C) 0.8 (D) 0.9

Last Answer : Answer: Option D

If depth of slab is 10 cm, width of web 30 cm, depth of web 50 cm, centre to centre distance of beams 3 m, effective span of beams 6 m, the effective flange width of the beam, is (A) 200 cm (B) 300 cm (C) 150 cm (D) 100 cm

Description : If depth of slab is 10 cm, width of web 30 cm, depth of web 50 cm, centre to centre distance of beams 3 m, effective span of beams 6 m, the effective flange width of the beam, is (A) 200 cm (B) 300 cm (C) 150 cm (D) 100 cm

Last Answer : Answer: Option C

A pre-stressed concrete member is preferred because (A) Its dimensions are not decided from the diagonal tensile stress (B) Large size of long beams carrying large shear force need not be adopted (C) Removal of cracks in the members due to shrinkage (D) All the above

Description : A pre-stressed concrete member is preferred because (A) Its dimensions are not decided from the diagonal tensile stress (B) Large size of long beams carrying large shear force need not be adopted (C) Removal of cracks in the members due to shrinkage (D) All the above

Last Answer : Answer: Option D

The floor slab of a building is supported on reinforced cement floor beams. The ratio of the end and intermediate spans is kept (A) 0.7 (B) 0.8 (C) 0.9 (D) 0.6

Description : The floor slab of a building is supported on reinforced cement floor beams. The ratio of the end and intermediate spans is kept (A) 0.7 (B) 0.8 (C) 0.9 (D) 0.6

Last Answer : Answer: Option C