Shocks and Struts Replacement?

Shocks and Struts Replacement?
by

1 Answer

Answer :

form_title=Shocks and Struts Replacement form_header=Getting your shocks and struts replaced will restore vehicle handling and control while greatly improving ride comfort. What is the year, make and model of your vehicle?=_ How many miles do you have on your car?=_ When was the last time your shocks and struts were replaced?=_
by

Related questions

TIES : STRUTS : a.purlins : piers b.angle : tee c.rolle support : hinge d.compression : tension e.107 dynes

Description : TIES : STRUTS : a.purlins : piers b.angle : tee c.rolle support : hinge d.compression : tension e.107 dynes

Last Answer : d. compression : tension

He's a boastful, puffed-up fellow, wearing spurs; eyes gleaming yellow. As he proudly struts about, he's in charge, there is no doubt.What is he? -Riddles

Description : He's a boastful, puffed-up fellow, wearing spurs; eyes gleaming yellow. As he proudly struts about, he's in charge, there is no doubt.What is he? -Riddles

Last Answer : He is a Rooster.

instructions remove/install rear struts

Description : instructions remove/install rear struts

Last Answer : Need Answer

How can yoy change Mcpherson struts, would I need a spring compressor?

Description : How can yoy change Mcpherson struts, would I need a spring compressor?

Last Answer : You will need a spring compressor for any strut installation job.

How do you replace the rear struts on a kia spectra?

Description : How do you replace the rear struts on a kia spectra?

Last Answer : With tools.

Struts are load carrying members of a frame structure which are subjected to (A) Axial tension loads (B) Axial compressive loads (C) Torsional loads (D) Transverse loads

Description : Struts are load carrying members of a frame structure which are subjected to  (A) Axial tension loads  (B) Axial compressive loads  (C) Torsional loads  (D) Transverse loads 

Last Answer : (B) Axial compressive loads 

Mild steel is used for (A) Structural works in beams, joints and girders (B) Small sized water pipes (C) Columns and struts (D) None of these

Description : Mild steel is used for (A) Structural works in beams, joints and girders (B) Small sized water pipes (C) Columns and struts (D) None of these

Last Answer : Answer: Option A

Cast iron is used for (A) Structural works in beams (B) Small sized water pipes (C) Columns and struts (D) None to these

Description : Cast iron is used for (A) Structural works in beams (B) Small sized water pipes (C) Columns and struts (D) None to these

Last Answer : Answer: Option C

Wrought iron is used for (A) Structural works in beams (B) Small sized water pipes (C) Columns and struts (D) None to these

Description : Wrought iron is used for (A) Structural works in beams (B) Small sized water pipes (C) Columns and struts (D) None to these

Last Answer : Answer: Option B

The members which support covering material of a sloping roof, are (A) Rafters (B) Purlins (C) Battens (D) Struts

Description : The members which support covering material of a sloping roof, are (A) Rafters (B) Purlins (C) Battens (D) Struts

Last Answer : Answer: Option A

A hand pump is usually fitted: a. For ground servicing purposes b. Lowering the landing gear in an emergency c. Pressurising the oleo struts in the air d. Retracting the gear after take-off

Description : A hand pump is usually fitted: a. For ground servicing purposes b. Lowering the landing gear in an emergency c. Pressurising the oleo struts in the air d. Retracting the gear after take-off

Last Answer : a. For ground servicing purposes

A hand pump is usually fitted: a. For ground servicing purposes b. Lowering the landing gear in an emergency c. Pressurising the oleo struts in the air d. Retracting the gear after take-off

Description : A hand pump is usually fitted: a. For ground servicing purposes b. Lowering the landing gear in an emergency c. Pressurising the oleo struts in the air d. Retracting the gear after take-off

Last Answer : a. For ground servicing purposes

What factors in the climate affect occurrence of static shocks?

Description : What factors in the climate affect occurrence of static shocks?

Last Answer : Very dry will do it. At the theater we ran humidifiers to cut down on the static.

Are there any temporary fixes for rear shocks on motorcycles ?

Description : Are there any temporary fixes for rear shocks on motorcycles ?

Last Answer : rubber grommets in between the springs

Would a humidfier in my room stop all the shocks I'm getting from the cold/dry weather?

Description : Would a humidfier in my room stop all the shocks I'm getting from the cold/dry weather?

Last Answer : answer:Proper humidification allows you to maintain a comfortable living environment, while protecting your investments, and eliminating static shock. Conditioning the amount of moisture in the air is ... .0 or higher http://www.lowes.com/lowes/lkn?action=howTo&p=Improve/AirQualityHumidity.html#5

I work in an office with tons of static electricity. How can we decrease the number of shocks?

Description : I work in an office with tons of static electricity. How can we decrease the number of shocks?

Last Answer : it sounds like a fun office on april 1st. i would have so much fun in there :D

Is it true that some fish give electric shocks?

Description : That's probably a fabrication, isn't it? Where would she take the current.

Last Answer : Electric eel live in the waters of South American rivers and swamps. It grows to a length of two and a half meters and a full four-fifths of the length of its body is occupied ... to communicate with each other. http://www.lidovky.cz/jeste-nabitejsi-uhor-0rr-/veda.aspx?c=A081007_084657_ln_veda_mtr

How hard is it to install air shocks on a lifted pickup truck?

Description : How hard is it to install air shocks on a lifted pickup truck?

Last Answer : Air shocks should be installed by a professional. You are dealing with high compression springs which can be fatal if handled incorrectly.

Is there a car alarm that shocks the person trying to open it?

Description : Is there a car alarm that shocks the person trying to open it?

Last Answer : It is illegal to have a car alarm that shocks someone because it cannot determine if someone touching the car is doing it innocently like a child or if someone is actually stealing the car.

Can you purchase a car alarm that shocks the person trying to make entry?

Description : Can you purchase a car alarm that shocks the person trying to make entry?

Last Answer : Many car alarm systems have the added capability to shock, whether by forced entry or through the wireless remote control. This feature is usually found on average to customizable systems, but can ... an accessory for those who would like to add the feature to their current compatible alarm system.

What's the best way to replace shocks?

Description : What's the best way to replace shocks?

Last Answer : You may want to seek professional help to replace the shocks. You could try searching http://www.yellowpagecity.com/ for your nearest mechanic. Otherwise, try searching for websites which detail how to replace shocks in cars.

Where can I buy Kyb Shocks online?

Description : Where can I buy Kyb Shocks online?

Last Answer : www.kyb.com/products/ This is a link where you can buy KYB Shocks online for sale with great highly reviews. all vehicles are equipped with some form of suspension damping control. they may ... gas or be electrically controlled. the two most widely used internal designs are twin-tube and monotube.

Engine pistons are usually made of aluminium alloy because it A. is lighter B. wears less C. Stronger D. absorbs shocks

Description : Engine pistons are usually made of aluminium alloy because it A. is lighter B. wears less C. Stronger D. absorbs shocks

Last Answer : ANSWER : A

Engine pistons are usually made of aluminium alloy as it a. is lighter b. wears less c. absorbs shocks d. is stronger

Description : Engine pistons are usually made of aluminium alloy as it a. is lighter b. wears less c. absorbs shocks d. is stronger

Last Answer : ANSWER a. is lighter

An electrical appliance is earthed to 1. Protect the appliance against any damage 2. Prevent electric shocks 3. Avoid short-circuiting Which of the above is/are correct? (a) 1 only (b) 2 only (c) 1 and 2 (d) 2 and 3

Description : An electrical appliance is earthed to 1. Protect the appliance against any damage 2. Prevent electric shocks 3. Avoid short-circuiting Which of the above is/are correct? (a) 1 only (b) 2 only (c) 1 and 2 (d) 2 and 3

Last Answer : Ans:(b)

The function of fuse in an electrical circuit is (a) avoid electric shocks (b) regulate the flow of current (c) break the circuit in case of overloading or short circuiting (d) switch off current

Description : The function of fuse in an electrical circuit is (a) avoid electric shocks (b) regulate the flow of current (c) break the circuit in case of overloading or short circuiting (d) switch off current

Last Answer : Ans:(c)

The purpose of a motor undervoltage protection device is to _____________. A. prevent high armature current when power is restored B. start the motor at a very low voltage C. trip the load off the motor in case of fire D. protect personnel from low voltage shocks

Description : The purpose of a motor undervoltage protection device is to _____________. A. prevent high armature current when power is restored B. start the motor at a very low voltage C. trip the load off the motor in case of fire D. protect personnel from low voltage shocks

Last Answer : Answer: A

The type of spring used to absorb shocks and vibrations in vehicles is, (A) Helical extension spring (B) Multi-leaf spring (C) Spiral spring (D) Belleville (coned disk) spring

Description : The type of spring used to absorb shocks and vibrations in vehicles is, (A) Helical extension spring (B) Multi-leaf spring (C) Spiral spring (D) Belleville (coned disk) spring

Last Answer : (B) Multi-leaf spring

Springs are used, (A) To absorb shocks and vibrations (B) To store and release energy (C) To measure force (D) For any of the above functions

Description : Springs are used, (A) To absorb shocks and vibrations (B) To store and release energy (C) To measure force (D) For any of the above functions

Last Answer : (D) For any of the above functions

The process by which RBI or any Central bank protects the economy against adverse economic shocks is known as :a) protectionb) liberalizationc) stabilizationd) sterilization

Description : The process by which RBI or any Central bank protects the economy against adverse economic shocks is known as : a) protection b) liberalization c) stabilization d) sterilization

Last Answer : d) sterilization

Out of the following __________ iron has the best capability to bear sudden & excessive shocks. (A) White (B) Cast (C) Wrought (D) Pig

Description : Out of the following __________ iron has the best capability to bear sudden & excessive shocks. (A) White (B) Cast (C) Wrought (D) Pig

Last Answer : (C) Wrought

Cast iron piles (A) Are suitable for works under sea water (B) Resist shocks or vibrations (C) Are suitable for use as batter piles (D) Are useful for heavy vertical loads

Description : Cast iron piles (A) Are suitable for works under sea water (B) Resist shocks or vibrations (C) Are suitable for use as batter piles (D) Are useful for heavy vertical loads

Last Answer : Option D

Cast iron piles (A) Are suitable for works under sea water (B) Resist shocks or vibrations (C) Are suitable for use as batter piles (D) Are useful for heavy vertical loads

Description : Cast iron piles (A) Are suitable for works under sea water (B) Resist shocks or vibrations (C) Are suitable for use as batter piles (D) Are useful for heavy vertical loads

Last Answer : Answer: Option D

Underground cables are laid at sufficient depth (a) to minimise temperature stresses (b) to avoid being unearthed easily due to removal of soil (c) to minimise the effect of shocks and vibrations due to gassing vehicles, etc. (d) for all of the above reasons

Description : Underground cables are laid at sufficient depth (a) to minimise temperature stresses (b) to avoid being unearthed easily due to removal of soil (c) to minimise the effect of shocks and vibrations due to gassing vehicles, etc. (d) for all of the above reasons

Last Answer : (c) to minimise the effect of shocks and vibrations due to gassing vehicles, etc.

Coil springs absorb shocks by (a) bending (b) twisting (c) compression (d) tension

Description : Coil springs absorb shocks by (a) bending (b) twisting (c) compression (d) tension

Last Answer : (c) compression

Leaf springs absorb shocks by (a) bending (b) twisting (c) compression (d) tension

Description : Leaf springs absorb shocks by (a) bending (b) twisting (c) compression (d) tension

Last Answer : a) bending

A spring used to absorb shocks and vibrations is (a) Close-coil helical spring (b) Open coiled helical spring (c) Spiral spring (d) Leaf spring

Description : A spring used to absorb shocks and vibrations is (a) Close-coil helical spring (b) Open coiled helical spring (c) Spiral spring (d) Leaf spring

Last Answer : (d) Leaf spring

The springs in brakes and clutches are used (a) To apply forces (b) To measure forces (c) To absorb shocks (d) To absorb strain energy

Description : The springs in brakes and clutches are used (a) To apply forces (b) To measure forces (c) To absorb shocks (d) To absorb strain energy

Last Answer : (a) To apply forces

In spring balances, the spring is used (a) To apply forces (b) To absorb shocks (c) To store strain energy (d) To measure forces

Description : In spring balances, the spring is used (a) To apply forces (b) To absorb shocks (c) To store strain energy (d) To measure forces

Last Answer : (d) To measure forces

Coil springs absorb shocks by (A) bending (B) twisting (C) compression (D) tension

Description : Coil springs absorb shocks by (A) bending (B) twisting (C) compression (D) tension

Last Answer : (C) compression

A spring used to absorb shocks and vibrations is (a) Close-coil helical spring (b) Open coiled helical spring (c) Spiral spring (d) Leaf spring

Description : A spring used to absorb shocks and vibrations is (a) Close-coil helical spring (b) Open coiled helical spring (c) Spiral spring (d) Leaf spring

Last Answer : d) Leaf spring

The springs in brakes and clutches are used (a) To apply forces (b) To measure forces (c) To absorb shocks (d) To absorb strain energy

Description : The springs in brakes and clutches are used (a) To apply forces (b) To measure forces (c) To absorb shocks (d) To absorb strain energy

Last Answer : (a) To apply forces

In spring balances, the spring is used (a) To apply forces (b) To absorb shocks (c) To store strain energy (d) To measure forces

Description : In spring balances, the spring is used (a) To apply forces (b) To absorb shocks (c) To store strain energy (d) To measure forces

Last Answer : (d) To measure forces