The term frog means (A) An apparatus to lift the stone (B) A depression on a face of brick (C) Vertical joint in a brick work (D) Soaking brick in water

The term frog means
(A) An apparatus to lift the stone
(B) A depression on a face of brick
(C) Vertical joint in a brick work
(D) Soaking brick in water
by

1 Answer

Answer :

Answer: Option B
by

Related questions

The frog of a brick is normally made on its (A) Top face (B) Bottom face (C) Longer face (D) Shorter side

Description : The frog of a brick is normally made on its (A) Top face (B) Bottom face (C) Longer face (D) Shorter side

Last Answer : Answer: Option A

The frog of the brick in a brick masonry is generally kept on (A) Bottom face (B) Top face (C) Shorter side (D) Longer side

Description : The frog of the brick in a brick masonry is generally kept on (A) Bottom face (B) Top face (C) Shorter side (D) Longer side

Last Answer : Answer: Option B

The position of a brick when laid on its side 9 cm × 9 cm with its frog in the vertical plane, is called (A) Brick on edge (B) Brick on end (C) Brick on bed (D) Brick held vertically

Description : The position of a brick when laid on its side 9 cm × 9 cm with its frog in the vertical plane, is called (A) Brick on edge (B) Brick on end (C) Brick on bed (D) Brick held vertically

Last Answer : Option B

The Frog of a brick is normally made on its a) Top face* b) Bottom face c) Longer face d) Shorter side

Description : The Frog of a brick is normally made on its a) Top face* b) Bottom face c) Longer face d) Shorter side

Last Answer : a) Top face*

Pick up the correct statement from the following: (A) A mortar joint having a concave finishing in brick masonry, is called keyed joint (B) A mortar joint projecting beyond the face of a masonry wall, is called tucked joint (C) A mortar joint having a recess in it, is called ruled joint (D) All the above

Description : Pick up the correct statement from the following: (A) A mortar joint having a concave finishing in brick masonry, is called keyed joint (B) A mortar joint projecting beyond the face of a masonry wall, is ... (C) A mortar joint having a recess in it, is called ruled joint (D) All the above

Last Answer : Option D

For the construction of buildings, the subheads of the estimate are (A) Earthwork, Concrete work, Brick work (B) Brickwork, Stone work, Roofing (C) Brickwork Flooring, Wood work, Steel work (D) All the above

Description : For the construction of buildings, the subheads of the estimate are (A) Earthwork, Concrete work, Brick work (B) Brickwork, Stone work, Roofing (C) Brickwork Flooring, Wood work, Steel work (D) All the above

Last Answer : (D) All the above

The range of spread from the wall base to outer edge of a brick work foundation does not exceed (A) 1/2 horizontal to 1 vertical (B) 2/3 horizontal to 1 vertical (C) 1 horizontal to 1 vertical (D) 2 horizontals to 1 vertical

Description : The range of spread from the wall base to outer edge of a brick work foundation does not exceed (A) 1/2 horizontal to 1 vertical (B) 2/3 horizontal to 1 vertical (C) 1 horizontal to 1 vertical (D) 2 horizontals to 1 vertical

Last Answer : Answer: Option C

In water bound macadam roads, binding material, is (A) Sand (B) Stone dust (C) Cement(D) Brick dust

Description : In water bound macadam roads, binding material, is (A) Sand (B) Stone dust (C) Cement (D) Brick dust

Last Answer : Answer: Option B

Stucco paints are suitable for (A) Stone masonry (B) Brick walls (C) Both (A) and (B) (D) Neither (A) nor (B)

Description : Stucco paints are suitable for (A) Stone masonry (B) Brick walls (C) Both (A) and (B) (D) Neither (A) nor (B)

Last Answer : Answer: Option C

Which of the following pairs gives a correct combination of the useful and harmful constituents respectively of a good brick earth? (A) Lime stone and alumina (B) Silica and alkalies (C) Alumina and iron (D) Alkalies and magnesium

Description : Which of the following pairs gives a correct combination of the useful and harmful constituents respectively of a good brick earth? (A) Lime stone and alumina (B) Silica and alkalies (C) Alumina and iron (D) Alkalies and magnesium

Last Answer : Answer: Option B

Herringbone bond is used for (A) Walls having thickness more than 4 bricks (B) Architectural finish to the face work (C) Ornamental panels in brick flooring (D) All the above

Description : Herringbone bond is used for (A) Walls having thickness more than 4 bricks (B) Architectural finish to the face work (C) Ornamental panels in brick flooring (D) All the above

Last Answer : Answer: Option D

The nominal thickness of an expansion joint in brick walls, is kept more than (A) 5 mm (B) 10 mm (C) 15 mm (D) 20 mm

Description : The nominal thickness of an expansion joint in brick walls, is kept more than (A) 5 mm (B) 10 mm (C) 15 mm (D) 20 mm

Last Answer : Answer: Option D

To stagger vertical joints in successive courses of a wall, a piece of brick is generally used at the end of the course, which is known as (A) Bat (B) Header (C) Stretcher (D) Closer

Description : To stagger vertical joints in successive courses of a wall, a piece of brick is generally used at the end of the course, which is known as (A) Bat (B) Header (C) Stretcher (D) Closer

Last Answer : Answer: Option D

To obtain good bonding in brick masonry (A) First class bricks are used (B) Vertical joints in alternate courses are kept in plumb line (C) Bats are used where necessary (D) All the above

Description : To obtain good bonding in brick masonry (A) First class bricks are used (B) Vertical joints in alternate courses are kept in plumb line (C) Bats are used where necessary (D) All the above

Last Answer : Option D

In frog, the surface of attachment of tongue is (a) pterygoid (b) hyoid apparatus (c) parasphenoid (d) palatine

Description : In frog, the surface of attachment of tongue is (a) pterygoid (b) hyoid apparatus (c) parasphenoid (d) palatine

Last Answer : (b) hyoid apparatus

The depth of frog in a brick is a) 15 mm b) 10 mm c) 6. 25 mm* d) 3 mm

Description : The depth of frog in a brick is a) 15 mm b) 10 mm c) 6. 25 mm* d) 3 mm

Last Answer : c) 6. 25 mm*

A queen closer is a (A) Brick laid with its length parallel to the face or direction of wall (B) Brick laid with its breadth parallel to the face or direction of wall (C) Brick having the same length and depth as the other bricks but half the breadth (D) Brick with half the width at one end and full width at the other

Description : A queen closer is a (A) Brick laid with its length parallel to the face or direction of wall (B) Brick laid with its breadth parallel to the face or direction of wall (C) Brick having the same ... bricks but half the breadth (D) Brick with half the width at one end and full width at the other

Last Answer : Answer: Option C

The brick laid with its length parallel to the face of a wall, is a known as (A) Header (B) Stretcher (C) Closer (D) None of the

Description : The brick laid with its length parallel to the face of a wall, is a known as (A) Header (B) Stretcher (C) Closer (D) None of the

Last Answer : Answer: Option B

The brick laid with its breadth parallel to the face of a wall, is known as (A) Header (B) Stretcher (C) Closer (D) None of these

Description : The brick laid with its breadth parallel to the face of a wall, is known as (A) Header (B) Stretcher (C) Closer (D) None of these

Last Answer : Answer: Option A

The 9 cm × 9 cm side of a brick as seen in the wall face, is generally known as (A) Stretcher (B) Face (C) Front (D) Heade

Description : The 9 cm × 9 cm side of a brick as seen in the wall face, is generally known as (A) Stretcher (B) Face (C) Front (D) Heade

Last Answer : Answer: Option D

Pick up the correct statement from the following: (A) English bond is used for brick masonry to support heavy loads (B) Double-Flemish bond is suitable for brick masonry to give uniform face appearance (C) The stretcher bond is used for the construction of half brick masonry brick (D) All the above

Description : Pick up the correct statement from the following: (A) English bond is used for brick masonry to support heavy loads (B) Double-Flemish bond is suitable for brick masonry to give uniform face ... The stretcher bond is used for the construction of half brick masonry brick (D) All the above

Last Answer : Answer: Option D

The 19 cm × 9 cm side of a brick as seen in the wall face, is generally known as (A) Stretcher (B) Face (C) Front (D) Heade

Description : The 19 cm × 9 cm side of a brick as seen in the wall face, is generally known as (A) Stretcher (B) Face (C) Front (D) Header

Last Answer : Answer: Option A

Find the correct statement from the followings. (a) For a cantilever slab, the ratio of span to overall depth should not 12. (b) One way slab which carry uniformly distributed load should be designed to resist a sagging bending moment near mid-span. (c) When the slab is built into a brick or masonry wall the slab should be designed to resist a hogging moment at the face of the support. (d) All of the above.

Description : Find the correct statement from the followings. (a) For a cantilever slab, the ratio of span to overall depth should not 12. (b) One way slab which carry uniformly distributed load should be designed to ... be designed to resist a hogging moment at the face of the support. (d) All of the above.

Last Answer : (d) All of the above.

Pick up the correct statement from the following: (A) In stone arches, the stones are placed with their natural beds radial (B) In cornices, the stones are placed with their natural beds as vertical (C) In stone walls, the stones are placed with their natural beds as horizontal (D) All the above

Description : Pick up the correct statement from the following: (A) In stone arches, the stones are placed with their natural beds radial (B) In cornices, the stones are placed with their natural beds as vertical (C) In stone walls, the stones are placed with their natural beds as horizontal (D) All the above

Last Answer : Answer: Option D

The method of moving each brick through a small horizontal distance before it is finally laid in any brick wall and pressing it by means of brick hammer, is known as (A) Trowelling (B) Laying (C) Grouting (D) Placing

Description : The method of moving each brick through a small horizontal distance before it is finally laid in any brick wall and pressing it by means of brick hammer, is known as (A) Trowelling (B) Laying (C) Grouting (D) Placing

Last Answer : Answer: Option B

Can brick, stone, or marble tile / pavers be used on a floor with a basement underneath it, in a new house to be constructed?

Description : Can brick, stone, or marble tile / pavers be used on a floor with a basement underneath it, in a new house to be constructed?

Last Answer : It’s quite possible. You just need to make sure your plans account for the weight. I know of several floors that have stone and marble tile over crawlspaces.

Differentiate between brick masonry and stone masonry

Description : Differentiate between brick masonry and stone masonry

Last Answer : Sr. no. Brick masonry Stone masonry 1 It is cheaper than stone masonry It is stronger than Brick masonry 2 It is cheaper in places where clay is available It is ... easy to apply any finishing to Brick surface. It is difficult to apply any finishing to stone surface

Compare stone masonry construction with brick masonry construction.

Description : Compare stone masonry construction with brick masonry construction.

Last Answer : STONE MASONRY  BRICK MASONRY 1. Stone masonry is stronger and more durable than brick masonry 1. Brick masonry is less stronger and less durable than stone masonry. 2. ... other hand is considered unsuitable in the construction of piers, docks, dams and other marine structure.

Compare brick masonry and stone masonry used in building construction.

Description : Compare brick masonry and stone masonry used in building construction.

Last Answer : Sr. No. Brick Masonry Stone Masonry 1 It is less stronger than stone masonry. It is stronger than brick masonry. 2 It is cheaper in places where clay is available ... is used Double scaffolding is used 12 Plastering is required  Plastering is not required

The alignment of a cross joint along the plumb line is (A) Bed block (B) Perpend (C) Lintel (D) Vertical lin

Description : The alignment of a cross joint along the plumb line is (A) Bed block (B) Perpend (C) Lintel (D) Vertical lin

Last Answer : Answer: Option B

Which of the following is the best revision of the inflated language example below The contemplation of the illuminated object on the wall for the vertical movement apparatus will render your position on the first floor irrelevant, until you make the....?

Description : Which of the following is the best revision of the inflated language example below The contemplation of the illuminated object on the wall for the vertical movement apparatus will render your position on the first floor irrelevant, until you make the....?

Last Answer : You should push the button to call the elevator to the first floor.

The smoothened surface of the front face of the guay walls, is known as fending which is made of (A) Granite stone (B) Timber (C) Steel (D) All the above

Description : The smoothened surface of the front face of the guay walls, is known as fending which is made of (A) Granite stone (B) Timber (C) Steel (D) All the above

Last Answer : (D) All the above

How World War 2 helped lift America out of the great depression?

Description : How World War 2 helped lift America out of the great depression?

Last Answer : by exchange of stake

A masonry dam (density = 20,000 N/m3 ) 6 m high, one metre wide at the top and 4 m wide at the base, has vertical water face. The minimum stress at the base of the dam when the reservoir is full, will be (A) 75 N/m2 (B) 750 N/m2 (C) 7500 N/m2 (D) 75000 N/m

Description : A masonry dam (density = 20,000 N/m3 ) 6 m high, one metre wide at the top and 4 m wide at the  base, has vertical water face. The minimum stress at the base of the dam when the reservoir is  full, will be  (A) 75 N/m2 (B) 750 N/m2 (C) 7500 N/m2 (D) 75000 N/m

Last Answer : (C) 7500 N/m

Pick up the correct statement from the following: (A) The artificial barrier constructed to enclose "n area for safe anchorage, is called break water (B) The smoothened surface at the top end of the vertical face of a guay wall, is called fending (C) The effective berthing lengths of inclined guays can be adjusted (D) All the above

Description : Pick up the correct statement from the following: (A) The artificial barrier constructed to enclose "n area for safe anchorage, is called break water (B) The smoothened surface at the top end of ... fending (C) The effective berthing lengths of inclined guays can be adjusted (D) All the above

Last Answer : (D) All the above

A mortar joint in masonry which is normal to the face of wall is known as (A) Bed joint (B) Wall joint (C) Cross joint (D) Bonded join

Description : A mortar joint in masonry which is normal to the face of wall is known as (A) Bed joint (B) Wall joint (C) Cross joint (D) Bonded join

Last Answer : Answer: Option C

Pick up the correct statement from the following: (A) The theodolite in which telescope can be rotated in vertical plane is called a transmit (B) When the vertical circle is to the left of the telescope during observation, it is called to be in left face (C) When the vertical circle is to the right of the telescope during observation, it is called to be in right face (D) All the above

Description : Pick up the correct statement from the following:  (A) The theodolite in which telescope can be rotated in vertical plane is called a transmit  (B) When the vertical circle is to the left of ... the telescope during observation, it is called to be  in right face  (D) All the above 

Last Answer : (D) All the above 

In optical reading instruments (A) The vertical circle is usually continuous from 0° to 359° (B) The readings increase when the telescope is elevated in the face left position (C) The readings decrease when the telescope is elevated in the face right position (D) All the above

Description : In optical reading instruments (A) The vertical circle is usually continuous from 0° to 359° (B) The readings increase when the telescope is elevated in the face left position (C) The readings decrease when the telescope is elevated in the face right position (D) All the above

Last Answer : (D) All the above

The angle of repose of a soil is the maximum angle which the outer face of the soil mass makes (A) With the horizontal (B) With the vertical (C) With the perpendicular to the inclined plane of the soil (D) None of these

Description : The angle of repose of a soil is the maximum angle which the outer face of the soil mass makes (A) With the horizontal (B) With the vertical (C) With the perpendicular to the inclined plane of the soil (D) None of these

Last Answer : Answer: Option A

Total pressure on the vertical face of a retaining wall of height h acts parallel to free surface and from the base at a distance of (A) h/4 (B) h/3 (C) h/2 (D) 2h/3

Description : Total pressure on the vertical face of a retaining wall of height h acts parallel to free surface and from the base at a distance of (A) h/4 (B) h/3 (C) h/2 (D) 2h/3

Last Answer : Answer: Option B

Which of the following type of sea walls results in greatest protection of shore structures? (A) Vertical sea wall (B) Sea wall with batter (C) Stepped sea wall (D) Sea wall with concave face

Description : Which of the following type of sea walls results in greatest protection of shore structures? (A) Vertical sea wall (B) Sea wall with batter (C) Stepped sea wall (D) Sea wall with concave face

Last Answer : (D) Sea wall with concave face

The temperature reinforcement in the vertical slab of a T-shaped R.C. retaining wall is (A) Not needed (B) Provided equally on inner and front faces (C) Provided more on inner face than on front face (D) Provided more on front face than on inner face

Description : The temperature reinforcement in the vertical slab of a T-shaped R.C. retaining wall is (A) Not needed (B) Provided equally on inner and front faces (C) Provided more on inner face than on front face (D) Provided more on front face than on inner face

Last Answer : Answer: Option D

The area of side face reinforcement shall not be less than [ A ] 0.10 percent of the web area on each vertical face [ B ] 0.05 percent of the web area on each vertical face [ C ] 0.15 percent of the web area on each vertical face [ D ] 0.20 percent of the web area

Description : The area of side face reinforcement shall not be less than [ A ] 0.10 percent of the web area on each vertical face [ B ] 0.05 percent of the web area on each vertical face [ C ] 0.15 percent of the web area on each vertical face [ D ] 0.20 percent of the web area

Last Answer : [ B ] 0.05 percent of the web area on each vertical face

The transport vesicles from the Endoplasmic Reticulum(ER) fuse with the ____of the Golgi apparatus. (A) Cis face (B) Trans face (C) Coated face (D) Both A and B

Description : The transport vesicles from the Endoplasmic Reticulum(ER) fuse with the ____of the Golgi apparatus. (A) Cis face (B) Trans face (C) Coated face (D) Both A and B

Last Answer : (A) Cis face

[Fiction question] What's it like in the aftermath of a face lift?

Description : [Fiction question] What's it like in the aftermath of a face lift?

Last Answer : Here is a web site that has some interesting stories from people who have gone under the knife, particularly the one from Angellady 65. There are some tips for pre- and post-operation with ... realistic work of fiction. She also posts photos as she heals that could aid in describing appearance.

How Much Does a Face Lift Cost?

Description : How Much Does a Face Lift Cost?

Last Answer : Headline: Is there such a thing as cheap face lifts? If so, arethey worth it?When researching face lifts, you probably keep price firmly inmind. No article on the internet will be ... less than oneof the most experienced cosmetic surgeons. In the end, the patientwants their desired look

What is the average age of people who get face lift surgery?

Description : What is the average age of people who get face lift surgery?

Last Answer : The average age of people with face lift surgeries varies. People age at different rates and the option for face lift surgery is available at any age. Individuals obtain the surgery at different ages and it ... people who get face lift surgery. The age range is from around 30 years old to around 80.

Face Lift Cream ?

Description : Face Lift Cream ?

Last Answer : additional} strivectineuros. Jeszcze ta cena 390 pln za krem organic parts are set up in Nz, they will use the very best pure substances and some may possibly be high-listed, ... .php?f=15&t=3998&p=16370#p16370 http://forums.mechaniki.org/index.php?showtopic=642171&st=0&gopid=907451&#entry907451

Asbestos pipes are joined by means of (A) Flanged joint (B) Flexible joint (C) Dresser coupling joint (D) Simplex joint

Description : Asbestos pipes are joined by means of (A) Flanged joint (B) Flexible joint (C) Dresser coupling joint (D) Simplex joint

Last Answer : (D) Simplex joint

Pick up the correct statements from the following: (A) Cracks appear on the plastered surface in the form of hair cracks (B) In brick work, the efflorescence is removed by applying a solution of zinc sulphate and water (C) Excessive thermal variations in the backing or plaster causes the plaster to fall (D) All the above

Description : Pick up the correct statements from the following: (A) Cracks appear on the plastered surface in the form of hair cracks (B) In brick work, the efflorescence is removed by applying a solution ... Excessive thermal variations in the backing or plaster causes the plaster to fall (D) All the above

Last Answer : Answer: Option D