A mortar joint in masonry which is normal to the face of wall is known as (A) Bed joint (B) Wall joint (C) Cross joint (D) Bonded join

A mortar joint in masonry which is normal to the face of wall is known as
(A) Bed joint
(B) Wall joint
(C) Cross joint
(D) Bonded join
by

1 Answer

Answer :

Answer: Option C
by

Related questions

Pick up the correct statement from the following: (A) A mortar joint having a concave finishing in brick masonry, is called keyed joint (B) A mortar joint projecting beyond the face of a masonry wall, is called tucked joint (C) A mortar joint having a recess in it, is called ruled joint (D) All the above

Description : Pick up the correct statement from the following: (A) A mortar joint having a concave finishing in brick masonry, is called keyed joint (B) A mortar joint projecting beyond the face of a masonry wall, is ... (C) A mortar joint having a recess in it, is called ruled joint (D) All the above

Last Answer : Option D

The type of pointing in which upper side of mortar joints is kept about 12 mm inside the face of the masonry and bottom is kept flushed with face of wall, is (A) Truck pointing (B) Recessed pointing (C) Struck pointing (D) Grooved pointing

Description : The type of pointing in which upper side of mortar joints is kept about 12 mm inside the face of the masonry and bottom is kept flushed with face of wall, is (A) Truck pointing (B) Recessed pointing (C) Struck pointing (D) Grooved pointing

Last Answer : Option C

Maximum slenderness ratio for load-bearing masonry wall in cement mortar, as per IS code, shall not exceed. (a) 13 (b) 20 (c) 27 (d) 30

Description : Maximum slenderness ratio for load-bearing masonry wall in cement mortar, as per IS code, shall not exceed. (a) 13 (b) 20 (c) 27 (d) 30

Last Answer : (c) 27

The strength of brick masonry in 1:6 cement mortar, is (A) 20 tonnes/m2 (B) 40 tonnes/m2 (C) 50 tonnes/m2 (D) 60 tonnes/m

Description : The strength of brick masonry in 1:6 cement mortar, is (A) 20 tonnes/m2 (B) 40 tonnes/m2 (C) 50 tonnes/m2 (D) 60 tonnes/m

Last Answer : Answer: Option C

The minimum strength of the mortar used in load bearing brick masonry, is (A) 50 N/cm2 (B) 100 N/cm2 (C) 150 N/cm2 (D) 200 N/cm2

Description : The minimum strength of the mortar used in load bearing brick masonry, is (A) 50 N/cm2 (B) 100 N/cm2 (C) 150 N/cm2 (D) 200 N/cm2

Last Answer : : Option B

Consider the following statements: Maximum slenderness ratio of load-bearing masonry walls for a dwelling having more than two storeys shall not exceed. 1. 12, if lime mortar is used 2. 18, if cement-lime mortar 1:2:9 is used 3. 24, if cement mortar 1:6 is used\ Which of these statements are correct? (a) 1 and 2 only b) 2 and 3 only c) 1 and 3 only d)1, 2 and 3

Description : Consider the following statements: Maximum slenderness ratio of load-bearing masonry walls for a dwelling having more than two storeys shall not exceed. 1. 12, if lime mortar is used 2. 18, if cement-lime mortar 1:2:9 is used 3. 24, ... ? (a) 1 and 2 only b) 2 and 3 only c) 1 and 3 only d)1, 2 and 3

Last Answer : b) 2 and 3 only

Find the correct statement from the followings. (a) For a cantilever slab, the ratio of span to overall depth should not 12. (b) One way slab which carry uniformly distributed load should be designed to resist a sagging bending moment near mid-span. (c) When the slab is built into a brick or masonry wall the slab should be designed to resist a hogging moment at the face of the support. (d) All of the above.

Description : Find the correct statement from the followings. (a) For a cantilever slab, the ratio of span to overall depth should not 12. (b) One way slab which carry uniformly distributed load should be designed to ... be designed to resist a hogging moment at the face of the support. (d) All of the above.

Last Answer : (d) All of the above.

Repairing by cement pressure grouting can be adopted in case of a) Honey comb concrete b) Hollow masonry, Dormant cracks c) Deep leached mortar joints d) all the above*

Description : Repairing by cement pressure grouting can be adopted in case of a) Honey comb concrete b) Hollow masonry, Dormant cracks c) Deep leached mortar joints d) all the above*

Last Answer : d) all the above*

Brick nogging type of partition wall, is constructed by (A) Laying bricks as stretchers in cement mortar (B) Laying bricks as headers in cement mortar (C) Reinforcing brick wall with iron straps (D) Constructing brick work within a wooden framework

Description : Brick nogging type of partition wall, is constructed by (A) Laying bricks as stretchers in cement mortar (B) Laying bricks as headers in cement mortar (C) Reinforcing brick wall with iron straps (D) Constructing brick work within a wooden framework

Last Answer : Answer: Option D

The alignment of a cross joint along the plumb line is (A) Bed block (B) Perpend (C) Lintel (D) Vertical lin

Description : The alignment of a cross joint along the plumb line is (A) Bed block (B) Perpend (C) Lintel (D) Vertical lin

Last Answer : Answer: Option B

A masonry dam (density = 20,000 N/m3 ) 6 m high, one metre wide at the top and 4 m wide at the base, has vertical water face. The minimum stress at the base of the dam when the reservoir is full, will be (A) 75 N/m2 (B) 750 N/m2 (C) 7500 N/m2 (D) 75000 N/m

Description : A masonry dam (density = 20,000 N/m3 ) 6 m high, one metre wide at the top and 4 m wide at the  base, has vertical water face. The minimum stress at the base of the dam when the reservoir is  full, will be  (A) 75 N/m2 (B) 750 N/m2 (C) 7500 N/m2 (D) 75000 N/m

Last Answer : (C) 7500 N/m

The frog of the brick in a brick masonry is generally kept on (A) Bottom face (B) Top face (C) Shorter side (D) Longer side

Description : The frog of the brick in a brick masonry is generally kept on (A) Bottom face (B) Top face (C) Shorter side (D) Longer side

Last Answer : Answer: Option B

Pick up the correct statement from the following: (A) English bond is used for brick masonry to support heavy loads (B) Double-Flemish bond is suitable for brick masonry to give uniform face appearance (C) The stretcher bond is used for the construction of half brick masonry brick (D) All the above

Description : Pick up the correct statement from the following: (A) English bond is used for brick masonry to support heavy loads (B) Double-Flemish bond is suitable for brick masonry to give uniform face ... The stretcher bond is used for the construction of half brick masonry brick (D) All the above

Last Answer : Answer: Option D

The water pressure per metre length on a vertical masonry wall of dam is (where w = Specific weight of the liquid, and H = Height of the liquid) (A) wH/2(B) wH (C) wH2 /2 (D) wH2 /4

Description : The water pressure per metre length on a vertical masonry wall of dam is (where w = Specific weight of the liquid, and H = Height of the liquid) (A) wH/2 (B) wH (C) wH2 /2 (D) wH2 /4

Last Answer : Answer: Option C

Pick up the correct statement from the following: (A) The breakwater which can be used as a platform for loading and unloading of cargo is called a mole (B) The brick masonry retaining wall which is used for loading and unloading of cargo is called quay wall (C) Three types of break waters are generally provided in harbours (D) All of the above

Description : Pick up the correct statement from the following: (A) The breakwater which can be used as a platform for loading and unloading of cargo is called a mole (B) The brick masonry retaining wall which is ... wall (C) Three types of break waters are generally provided in harbours (D) All of the above

Last Answer : (D) All of the above

The critical section for finding maximum bending moment for footing under masonry wall is located (A) At the middle of the wall (B) At the edge of the wall (C) Halfway between the middle and edge of the wall (D) At a distance equal to effective depth of footing from the edge of the wall

Description : The critical section for finding maximum bending moment for footing under masonry wall is located (A) At the middle of the wall (B) At the edge of the wall (C) Halfway between the middle and edge of the wall (D) At a distance equal to effective depth of footing from the edge of the wall

Last Answer : Answer: Option C

Expansion Joints in masonry walls are provided in wall lengths usater than (A) 10 m (B) 20 m (C) 30 m (D) 40 m

Description : Expansion Joints in masonry walls are provided in wall lengths usater than (A) 10 m (B) 20 m (C) 30 m (D) 40 m

Last Answer : Answer: Option D

The stretcher bond in brick masonry can be used only when the thickness of wall is (A) 90 mm (B) 180 mm (C) 190 mm (D) 280 mm

Description : The stretcher bond in brick masonry can be used only when the thickness of wall is (A) 90 mm (B) 180 mm (C) 190 mm (D) 280 mm

Last Answer : Answer: Option A

A short masonry pillar is 60 cm x 60 cm in cross-section, the core of the pillar is a square whose side is (A) 17.32 cm (B) 14.14 cm (C) 20.00 cm (D) 22.36 cm

Description : A short masonry pillar is 60 cm x 60 cm in cross-section, the core of the pillar is a square whose side is (A) 17.32 cm (B) 14.14 cm (C) 20.00 cm (D) 22.36 cm

Last Answer : (B) 14.14 cm

The normal curing period for lime mortar, is: (A) 1 day (B) 3 days (C) 7 days (D) 10 days

Description : The normal curing period for lime mortar, is: (A) 1 day (B) 3 days (C) 7 days (D) 10 days

Last Answer : Answer: Option C

Wall decorations made from small pieces of marble set in mortar were commonly seen in Roman art. What is this type of artwork called?

Description : Wall decorations made from small pieces of marble set in mortar were commonly seen in Roman art. What is this type of artwork called?

Last Answer : This type of decoration is often called a mosaic. The definition of a mosaic is a picture or pattern produced by arranging together small colored pieces of hard material, such as stone, tile, or glass. Judging from your question, the correct answer would be A MOSAIC.

Separation of coarse aggregates from mortar during transportation, is known (A) Bleeding (B) Creeping (C) Segregation (D) Shrinkage

Description : Separation of coarse aggregates from mortar during transportation, is known (A) Bleeding (B) Creeping (C) Segregation (D) Shrinkage

Last Answer : Answer: Option C

Does ribbon pointing make a wall of masonry stronger than other kinds of pointing?

Description : Does ribbon pointing make a wall of masonry stronger than other kinds of pointing?

Last Answer : answer:I don't know for certain, but it's not the pointing that lends strength to the joint, it's the mortar inside between the stones. The big thing is that you need to keep water from getting ... and replacing it, not just repointing. He may have taken I just want them repointed at face value.

Draw a neat labeled sectional view showing different components of building from foundation to parapet, for a load bearing brick masonry wall.

Description : Draw a neat labeled sectional view showing different components of building from foundation to parapet, for a load bearing brick masonry wall.

Last Answer : Draw a neat labeled sectional view showing different components of building from foundation to parapet, for a load bearing brick masonry wall.

In brick masonry the bond produced by laying alternate headers and stretchers in each course is known as (A) English bond (B) Double Flemish bond (C) Zigzag bond (D) Single Flemish bond

Description : In brick masonry the bond produced by laying alternate headers and stretchers in each course is known as (A) English bond (B) Double Flemish bond (C) Zigzag bond (D) Single Flemish bond

Last Answer : Answer: Option B

A part of the slab may be considered as the flange of the T-beam if (A) Flange has adequate reinforcement transverse to beam (B) It is built integrally with the beam (C) It is effectively bonded together with the beam (D) All the above

Description : A part of the slab may be considered as the flange of the T-beam if (A) Flange has adequate reinforcement transverse to beam (B) It is built integrally with the beam (C) It is effectively bonded together with the beam (D) All the above

Last Answer : Answer: Option D

Pick up the correct statement from the following: (A) Large solids carried along the river bed, is known as bed load (B) The fine sediment deposits are generally near the face of the dam (C) Deposition of sediment in the reservoir, reduces the capacity of the reservoir (D) All the above

Description : Pick up the correct statement from the following:  (A) Large solids carried along the river bed, is known as bed load  (B) The fine sediment deposits are generally near the face of ... ) Deposition of sediment in the reservoir, reduces the capacity of the reservoir  (D) All the above 

Last Answer : (D) All the above 

The brick laid with its length parallel to the face of a wall, is a known as (A) Header (B) Stretcher (C) Closer (D) None of the

Description : The brick laid with its length parallel to the face of a wall, is a known as (A) Header (B) Stretcher (C) Closer (D) None of the

Last Answer : Answer: Option B

The brick laid with its breadth parallel to the face of a wall, is known as (A) Header (B) Stretcher (C) Closer (D) None of these

Description : The brick laid with its breadth parallel to the face of a wall, is known as (A) Header (B) Stretcher (C) Closer (D) None of these

Last Answer : Answer: Option A

The 9 cm × 9 cm side of a brick as seen in the wall face, is generally known as (A) Stretcher (B) Face (C) Front (D) Heade

Description : The 9 cm × 9 cm side of a brick as seen in the wall face, is generally known as (A) Stretcher (B) Face (C) Front (D) Heade

Last Answer : Answer: Option D

The 19 cm × 9 cm side of a brick as seen in the wall face, is generally known as (A) Stretcher (B) Face (C) Front (D) Heade

Description : The 19 cm × 9 cm side of a brick as seen in the wall face, is generally known as (A) Stretcher (B) Face (C) Front (D) Header

Last Answer : Answer: Option A

The expected out turn of brick work in cement mortar in foundation and plinth per mason per day, is (A) 1.00 m3 (B) 1.25 m3 (C) 1.50 m3 (D) 1.75 m3

Description : The expected out turn of brick work in cement mortar in foundation and plinth per mason per day, is (A) 1.00 m3 (B) 1.25 m3 (C) 1.50 m3 (D) 1.75 m3

Last Answer : (B) 1.25 m3

The expected out turn of 12 mm plastering with cement mortar is (A) 2.5 sq m (B) 4.0 sq m (C) 6.0 sq m (D) 8.0 sq m

Description : The expected out turn of 12 mm plastering with cement mortar is (A) 2.5 sq m (B) 4.0 sq m (C) 6.0 sq m (D) 8.0 sq m

Last Answer : (D) 8.0 sq m

The rate of an item of work depends on (A) Specifications of works (B) Specifications of materials (C) Proportion of mortar (D) All the above

Description : The rate of an item of work depends on (A) Specifications of works (B) Specifications of materials (C) Proportion of mortar (D) All the above

Last Answer : (D) All the above

Pick up the incorrect statement from the following. For performing compressive strength test of cement (A) Cement and standard sand mortar are used in the ratio of 1 : 3 (B) Water is added at the rate of (P/4) + 3.0 percentage of water where P is the percentage of water for standard consistency (C) A cube mould of 10 cm × 10 cm × 10 cm is used (D) The prepared moulds are kept in a atmosphere of 50% relative humidity

Description : Pick up the incorrect statement from the following. For performing compressive strength test of cement (A) Cement and standard sand mortar are used in the ratio of 1 : 3 (B) Water is added at the ... cm 10 cm is used (D) The prepared moulds are kept in a atmosphere of 50% relative humidity

Last Answer : Answer: Option A

Lime mortar is generally made with (A) Quick lime (B) Fat lime (C) Hydraulic lime (D) Plain lime

Description : Lime mortar is generally made with (A) Quick lime (B) Fat lime (C) Hydraulic lime (D) Plain lime

Last Answer : Answer: Option C

Study the following statements. (i) Hydraulic lime is suitable for white washing, (ii) Fat lime is suitable for whitewashing, (iii) Hydraulic lime is suitable for making mortar, (iv) Fat lime is suitable for making mortar.

Description : Study the following statements. (i) Hydraulic lime is suitable for white washing, (ii) Fat lime is suitable for whitewashing, (iii) Hydraulic lime is suitable for making mortar, (iv) Fat lime is suitable for making mortar.

Last Answer : Answer: Option B (B) (ii) and (iii)

The most important tool in brick laying for lifting and spreading mortar and for forming joints is (A) Trowel (B) Square (C) Bolster (D) Scutch

Description : The most important tool in brick laying for lifting and spreading mortar and for forming joints is (A) Trowel (B) Square (C) Bolster (D) Scutch

Last Answer : Answer: Option A

In a mortar, the binding material is (A) Cement (B) Sand (C) Surkhi (D) Cinder

Description : In a mortar, the binding material is (A) Cement (B) Sand (C) Surkhi (D) Cinder

Last Answer : Answer: Option A

The proportions of lime and sand in the mortar normally used in brick construction are (A) 1 : 2 (B) 1 : 4 (C) 1 : 6 (D) 1 : 8

Description : The proportions of lime and sand in the mortar normally used in brick construction are (A) 1 : 2 (B) 1 : 4 (C) 1 : 6 (D) 1 : 8

Last Answer : Answer: Option A

Pick up the incorrect statement from the following: (A) Hydraulic lime is generally obtained by burning kankar (B) Hydraulic lime sets slowly as compared to fat lime (C) Hydraulic lime is generally used in lime mortar (D) None of these

Description : Pick up the incorrect statement from the following: (A) Hydraulic lime is generally obtained by burning kankar (B) Hydraulic lime sets slowly as compared to fat lime (C) Hydraulic lime is generally used in lime mortar (D) None of these

Last Answer : Answer: Option D

For testing compressive and tensile strength of cement, the cement mortar is made by mixing cement and standard sand in the proportions of (A) 1 : 2 (B) 1 : 3 (C) 1 : 4 (D) 1 : 6

Description : For testing compressive and tensile strength of cement, the cement mortar is made by mixing cement and standard sand in the proportions of (A) 1 : 2 (B) 1 : 3 (C) 1 : 4 (D) 1 : 6

Last Answer : Answer: Option B

The minimum thickness of walls built in cement mortar (1 : 6) for a single storey building, is (A) 10 cm (B) 15 cm (C) 20 cm (D) 25 cm

Description : The minimum thickness of walls built in cement mortar (1 : 6) for a single storey building, is (A) 10 cm (B) 15 cm (C) 20 cm (D) 25 cm

Last Answer : Answer: Option C

For brick construction, the lime-sand mortar, is (A) 1 : 1 (B) 1 : 2 (C) 1 : 3 (D) 1 : 4

Description : For brick construction, the lime-sand mortar, is (A) 1 : 1 (B) 1 : 2 (C) 1 : 3 (D) 1 : 4

Last Answer : Answer: Option B

The mortar in which both cement and lime are used as binding materials, is called (A) Cement mortar (B) Lime mortar (C) Fire resistant mortar (D) Gauged mortar

Description : The mortar in which both cement and lime are used as binding materials, is called (A) Cement mortar (B) Lime mortar (C) Fire resistant mortar (D) Gauged mortar

Last Answer : Answer: Option D

For plastering the exposed brick walls, the cement sand mortar should be (A) 1 : 2 (B) 1 : 3 (C) 1 : 4 (D) 1 : 6

Description : For plastering the exposed brick walls, the cement sand mortar should be (A) 1 : 2 (B) 1 : 3 (C) 1 : 4 (D) 1 : 6

Last Answer : Answer: Option C

Pick up the correct statement from the following: (A) Lime mortar with cement in the ratio of in 10 is cheaper and better for outside plaster (B) For very cold or very hot climate, a compact and closed plan should be provided (C) On the sea coast, an exposed and open house is generally preferred (D) All the above

Description : Pick up the correct statement from the following: (A) Lime mortar with cement in the ratio of in 10 is cheaper and better for outside plaster (B) For very cold or very hot climate, a compact and closed ... (C) On the sea coast, an exposed and open house is generally preferred (D) All the above

Last Answer : Answer: Option D

When percentage of mica present in sand is large, it (a) Reduces the strength of mortar, or concrete (b) Increases the strength of mortar or concrete (c) Has no effect on mortar, or concrete strength (d) Enhances the strength of mortar, or concrete, but only marginally

Description : When percentage of mica present in sand is large, it (a) Reduces the strength of mortar, or concrete (b) Increases the strength of mortar or concrete (c) Has no effect on mortar, or concrete strength (d) Enhances the strength of mortar, or concrete, but only marginally

Last Answer : (c) Has no effect on mortar, or concrete strength

The rocks formed out of layers of sediment bonded together are known as --------? A. Metamorphic rocks B. Sedimentary rocks (Answer) C. Igneous rocks D. All of the above

Description : The rocks formed out of layers of sediment bonded together are known as --------? A. Metamorphic rocks B. Sedimentary rocks (Answer) C. Igneous rocks D. All of the above

Last Answer : B. Sedimentary rocks (Answer)

The term frog means (A) An apparatus to lift the stone (B) A depression on a face of brick (C) Vertical joint in a brick work (D) Soaking brick in water

Description : The term frog means (A) An apparatus to lift the stone (B) A depression on a face of brick (C) Vertical joint in a brick work (D) Soaking brick in water

Last Answer : Answer: Option B