What size socket do you need to change the wheel bearings on 1998 GMC Jimmy front and back axles?

What size socket do you need to change the wheel bearings on 1998 GMC Jimmy front and back axles?
by

1 Answer

Answer :

Need to know if 2 wheel or 4 wheel drive for the front. Eitherway, there is no nut on the back axles.
by
selected by

Related questions

Consider the following pairs of types of bearings and applications: 1. Partial Journal bearing................... Rail wagon axles 2. Full journal bearing ......................Diesel engine crank-shaft 3. Radial bearing ............................Combined radial and axial loads Which of these pairs is/are correctly matched? [IES-2000] (a) 1 alone (b) 1 and 2 (c) 2 and 3 (d) 1, 2 and 3

Description : Consider the following pairs of types of bearings and applications: 1. Partial Journal bearing................... Rail wagon axles 2. Full journal bearing ......................Diesel engine crank-shaft 3. Radial bearing ... matched? [IES-2000] (a) 1 alone (b) 1 and 2 (c) 2 and 3 (d) 1, 2 and 3

Last Answer : (b) 1 and 2

Bearings used to support axles of traction coaches are

Description : Bearings used to support axles of traction coaches are   (a) Ball bearings (b) Bush bearings (c) Roller bearings (d) Journal bearings

Last Answer : Bearings used to support axles of traction coaches are Roller bearings

How do you change a license plate bulb on a 1998 GMC truck?

Description : How do you change a license plate bulb on a 1998 GMC truck?

Last Answer : You can gain access from behind the bumper.

Tractors can be generally classified by number of or wheels A. Axles C. Single Wheel

Description : Tractors can be generally classified by number of or wheels A. Axles C. Single Wheel

Last Answer : Axles

Front and rear wheel axle bearings may be washed and replaced once in a) four years b) three years c) two years d) one year

Description : Front and rear wheel axle bearings may be washed and replaced once in a) four years b) three years c) two years d) one year

Last Answer : d) one year

what size socket to remove front hub from a 1995 buick lesabre?

Description : what size socket to remove front hub from a 1995 buick lesabre?

Last Answer : If you get a star wrench you wont have to worry as they are standard and one of the four will fit.

Match List -I (Bearings) with List-II (Applications) and select the using the codes given below the lists: [IAS-1998] List –I List-II A. Journal bearing 1. Electric motors B. Thrust bearing 2. Watches C. Conical pivot bearing 3. Marine engines D. Ball bearing 4. Swivelling chairs A B C D A B C D (a) 3 4 1 2 (b) 4 2 1 3 (c) 3 4 2 1 (d) 4 2 3 1

Description : Match List -I (Bearings) with List-II (Applications) and select the using the codes given below the lists: [IAS-1998] List -I List-II A. Journal bearing 1. Electric motors B. Thrust bearing 2. Watches C. Conical pivot bearing 3. Marine ... D (a) 3 4 1 2 (b) 4 2 1 3 (c) 3 4 2 1 (d) 4 2 3 1

Last Answer : (c) 3 4 2 1

Where can I get new wheel bearings?

Description : Where can I get new wheel bearings?

Last Answer : The best place to get any auto parts or wheel bearings is from your auto car dealer, or Canadian tire they should have you wanted. From what I gather no prices were posted online.

Ball bearings are used in cycles, scooters etc. to _____. A. Reduce the friction between the wheel and the axle B. Increase the friction between the wheel and the axle C. Reduce the friction between ground and the wheel D. None of these

Description : Ball bearings are used in cycles, scooters etc. to _____. A. Reduce the friction between the wheel and the axle B. Increase the friction between the wheel and the axle C. Reduce the friction between ground and the wheel D. None of these

Last Answer : ANSWER: A

The function of ball bearings in a wheel is – (1) to increase friction (2) to convert kinetic friction into rolling friction (3) to convert static friction into kinetic friction (4) just for convenience

Description : The function of ball bearings in a wheel is – (1) to increase friction (2) to convert kinetic friction into rolling friction (3) to convert static friction into kinetic friction (4) just for convenience

Last Answer : (2) to convert kinetic friction into rolling friction Explanation: A ball bearing is a type of rollingelement bearing that uses balls to maintain the separation between the bearing races. The purpose of a ball bearing is to reduce rotational friction and support radial and axial loads.

When removing ball or roller bearings from the shaft of a motor, you should use a _____________. A. rawhide hammer B. brass mallet C. wheel puller D. soft iron pry bar

Description : When removing ball or roller bearings from the shaft of a motor, you should use a _____________. A. rawhide hammer B. brass mallet C. wheel puller D. soft iron pry bar

Last Answer : Answer: C

The only point in the steering stand shown in the illustration which needs periodic lubrication is the ______________. EL-0098 A. repeater assembly ball bearings B. steering wheel bearing C. operation selector switch D. course selector pointer

Description : The only point in the steering stand shown in the illustration which needs periodic lubrication is the ______________. EL-0098 A. repeater assembly ball bearings B. steering wheel bearing C. operation selector switch D. course selector pointer

Last Answer : Answer: B

The function of ball bearings in a wheel is : (1) to increase friction (2) to convert kinetic friction into rolling friction (3) to convert static friction into kinetic friction (4) just for convenience

Description : The function of ball bearings in a wheel is : (1) to increase friction (2) to convert kinetic friction into rolling friction (3) to convert static friction into kinetic friction (4) just for convenience

Last Answer : to convert kinetic friction into rolling friction

What size engines are offered in 2007 GMC pickups?

Description : What size engines are offered in 2007 GMC pickups?

Last Answer : Most 2007 GMC pickups have the 5.3L V-8. That is standard in the pickup but some of them have the 7.3L Cummins which is the diesel and can be upgraded when you buy new.

While Lilo was playing with a toy tractor, she rolled it over an ink drop. The image on the right shows the ink drop and the marks on the floor left by tractor’s wheels. The diameter of the back wheel of the tractor is 1.5 times that of its front wheel. What is the number of revolutions made by the front wheel between the ink drop and the last mark?

Description : While Lilo was playing with a toy tractor, she rolled it over an ink drop. The image on the right shows the ink drop and the marks on the floor left by tractor's wheels. The diameter of the back ... is the number of revolutions made by the front wheel between the ink drop and the last mark?

Last Answer : 6

Railway wagon axles are made by heating rods of iron embedded in charcoal powerder. The process is known as

Description : Railway wagon axles are made by heating rods of iron embedded in charcoal powerder. The process is known as

Last Answer : Railway wagon axles are made by heating rods of iron embedded in charcoal powerder. The process ... hardening B. sheradising C. annelaing D. tempering

How are levers and wheels and axles different?

Description : How are levers and wheels and axles different?

Last Answer : Feel Free to Answer

If metres is the distance between extreme axles of a vehicle, its gross load should not exceed (A) 1525 (L + 4.3) - 14.7 L2 (B) 1526 (L + 5.3) - 14.7 L2 (C) 1525 (L + 6.3) - 14.7 L2 (D) 1525 (L + 7.3) - 14.7 L2

Description : If metres is the distance between extreme axles of a vehicle, its gross load should not exceed (A) 1525 (L + 4.3) - 14.7 L2 (B) 1526 (L + 5.3) - 14.7 L2 (C) 1525 (L + 6.3) - 14.7 L2 (D) 1525 (L + 7.3) - 14.7 L2

Last Answer : Answer: Option D

Vanadium steel is generally used for (A) Railway switches and crossing (B) Bearing balls (C) Magnets (D) Axles and spring

Description : Vanadium steel is generally used for (A) Railway switches and crossing (B) Bearing balls (C) Magnets (D) Axles and spring

Last Answer : Answer: Option D

Which of the following loading is considered for the design of axles ? (a) Bending moment only (b) Twisting moment only (c) Combined bending moment and torsion (d) Combined action of bending moment, twisting moment and axial thrust

Description : Which of the following loading is considered for the design of axles ? (a) Bending moment only (b) Twisting moment only (c) Combined bending moment and torsion (d) Combined action of bending moment, twisting moment and axial thrust

Last Answer : (a) Bending moment only

Spiral gear are used for transmitting power between two shaft Inclined at a. Right angle to each other and axes can intersect b. Right angle to each other and axes cannot intersect c. At angle slightly lesser or greater than 90 of axles can meet d. None of the above

Description : Spiral gear are used for transmitting power between two shaft Inclined at a. Right angle to each other and axes can intersect b. Right angle to each other and axes cannot intersect c. At angle slightly lesser or greater than 90 of axles can meet d. None of the above

Last Answer : c. At angle slightly lesser or greater than 90 of axles can meet

how to change the oil pressure sensor on a 2007 GMC Denali Yukon

Description : how to change the oil pressure sensor on a 2007 GMC Denali Yukon

Last Answer : Need Answer

how to change spark plug wires 2002 gmc saffari

Description : how to change spark plug wires 2002 gmc saffari

Last Answer : Need Answer

When will GMC YUKON BODY STYLE CHANGE AGAIN?

Description : When will GMC YUKON BODY STYLE CHANGE AGAIN?

Last Answer : In 5 years.

What size battery do I need to buy for my 1998 Crown Victoria?

Description : What size battery do I need to buy for my 1998 Crown Victoria?

Last Answer : Because this is an older model with none of todays modern upgrade a smaller battery will be sufficent. Anything higher could give you too much power.

I would like to tow my automatic front wheel drive Jetta behind my motorhome. Can i do this without buying a dolly?

Description : I would like to tow my automatic front wheel drive Jetta behind my motorhome. Can i do this without buying a dolly?

Last Answer : No. No automatic car should be moved with its driving wheels on the ground unless it is actually driving, not even in neutral. The difference in rotation speeds between the different shafts in the transmission will cause it to burn out, and you will need a new or a reconditioned transmission.

Did the front wheel really wobble? What is your opinion? Give a reason for your answer -English-7

Description : Did the front wheel really wobble? What is your opinion? Give a reason for your answer -English-7

Last Answer : No, the front wheel didn't really wobble. The author himself says that it didn’t wobble.The man was just trying to prove that he knew about bicycles to create an impression.

Clicking the front right wheel

Description : Hi, I have a question. Yesterday, when reversing on an unpaved road, I ran into an unevenness and a bang sounded. Since then, at speeds of about 40 km / h, there was a barely audible click from ... only heard when the window was open. Would anyone know what it could be? Or if it could be serious?

Last Answer : There can be many causes. He wants to look at it. Visit a mechanic or service and see.

Is my 2016 Chrysler Town and Country front or rear wheel drive?

Description : Is my 2016 Chrysler Town and Country front or rear wheel drive?

Last Answer : A 2016 Chrysler Town and Country is front wheel drive.

What problems can cause front wheel fall off car?

Description : What problems can cause front wheel fall off car?

Last Answer : Could be,Wheel bearing failure,Lug nuts not tightened properly,Lug nuts over tightened,Incorrect wheel for that vehicle,Ball joint failure,

What is the Torque specs for the 2006 Saturn vue front wheel hub?

Description : What is the Torque specs for the 2006 Saturn vue front wheel hub?

Last Answer : Feel Free to Answer

Styrene butadiene rubber (SBR) is never used for making (A) Coated fabrics (B) Front wheel tyres of aeroplanes (i.e., heavy duty tyres)

Description : Styrene butadiene rubber (SBR) is never used for making (A) Coated fabrics (B) Front wheel tyres of aeroplanes (i.e., heavy duty tyres)

Last Answer : (B) Front wheel tyres of aeroplanes (i.e., heavy duty tyres)

The tie rod connects the front wheel spindle arms and is actuated by the steering shaft through a) chain link b) gear link c) tension link d) drag link

Description : The tie rod connects the front wheel spindle arms and is actuated by the steering shaft through a) chain link b) gear link c) tension link d) drag link

Last Answer : d) drag link

pressure should be high in front wheel of the tractor because of a) high slippage b) low slippage c) high traction d) easy steer ability Ans. d

Description : pressure should be high in front wheel of the tractor because of a) high slippage b) low slippage c) high traction d) easy steer ability Ans. d

Last Answer : ans d

pressure should be less in rear wheel as compare to front wheel because of a) high traction b) low draft c) high draft d) none of these Ans. a

Description : pressure should be less in rear wheel as compare to front wheel because of a) high traction b) low draft c) high draft d) none of these Ans. a

Last Answer : ans a

Handbrake is applicable to A. Only front wheels B. Only rear wheels C. Both front and rear wheel. D. All of the above.

Description : Handbrake is applicable to A. Only front wheels B. Only rear wheels C. Both front and rear wheel. D. All of the above.

Last Answer : B. Only rear wheels

Sketch a layout of Front Engine Rear Wheel Drive vehicle & label the major parts

Description : Sketch a layout of Front Engine Rear Wheel Drive vehicle & label the major parts

Last Answer : Fig:- Front EngineRear Wheel Drive Vehicle Layout

Draw a neat layout of front engine front wheel drive and label it.

Description : Draw a neat layout of front engine front wheel drive and label it.

Last Answer : Figure: Front Engine Front Wheel Drive

Can you help me locate an on-line repair diagram for the brake booster system on a 95 GMC Suburban 1500?

Description : Can you help me locate an on-line repair diagram for the brake booster system on a 95 GMC Suburban 1500?

Last Answer : You want to risk your life by fiddling with your brakes just to save some money? Especially on such an old, unsave and huge barge (read: deathtrap)? Don’t do it. Go to a Kfz mechanic.

Can you put a 1999 gmc sonoma 4 cylinder engine with automatic transmission in a 1994 gmc sonoma 4 cylinder engine that has a 5 speed transmission?

Description : Can you put a 1999 gmc sonoma 4 cylinder engine with automatic transmission in a 1994 gmc sonoma 4 cylinder engine that has a 5 speed transmission?

Last Answer : UPDATE......We just went a totally different way with it... No need for anyone trying to answer.Thank you all

my 91 gmc sonoma has axle grease in the real brake hub why?

Description : my 91 gmc sonoma has axle grease in the real brake hub why?

Last Answer : Need Answer

how to remove heater hoses on gmc sierria 3500

Description : how to remove heater hoses on gmc sierria 3500

Last Answer : Need Answer

my 2002 gmc yukon keeps draining the battery

Description : my 2002 gmc yukon keeps draining the battery

Last Answer : Need Answer

GMC rally wagon cheap battery

Description : GMC rally wagon cheap battery

Last Answer : Need Answer

Where is bank 2 sensor sensor 1 on a 1997 GMC?

Description : Where is bank 2 sensor sensor 1 on a 1997 GMC?

Last Answer : Assuming this is a V6 or V8 engine, Bank 2 is the bank ofcylinders on the passenger side of engine. Sensor 1 is threadedinto the exhaust pipe between the passenger side of engine and thecatalytic converter AKA upstream.

Where is the block heater on a 2004 GMC Envoy located?

Description : Where is the block heater on a 2004 GMC Envoy located?

Last Answer : If it even has one, follow the cord back to the block. The cordwill lead you right to it.

How do you reset mil light on 1988 GMC Safari van?

Description : How do you reset mil light on 1988 GMC Safari van?

Last Answer : Disconnect the neg cable from the battery for a moment or two.This will reset the light but it will come back on if the reasonthe light came on in the first place wasn't fixed.

How do you program 2003 GMC ENVOY XL FOB?

Description : How do you program 2003 GMC ENVOY XL FOB?

Last Answer : Feel Free to Answer

Where are gmc 3500 trucks manufactured?

Description : Where are gmc 3500 trucks manufactured?

Last Answer : Feel Free to Answer

What type of oil for a 2002 gmc w4500?

Description : What type of oil for a 2002 gmc w4500?

Last Answer : Need answer